Problem with vi after changing the size of the window

Similar Questions

• Problems with mappings when changing the type of source table field?

  Hello world
  
  one question.
  Is it a problem when I change my types of fields in my table of source of char for example varchar2 with mapping that uses this table?
  In the mapping of the source table field Types are defined as Char fields. Do I have to change all the fields of char to varchar2 (via Import again from the source table and synchronize in the map)?
  
  Thanks in advance.
  
  Greetings

  Hello

  If your new data type (in the database is compatible and big enough) then you probably don't have to change the class in your other mapping wise you need.

  It a good practice to import the last definition of table (metadata) in the repository of OWB and then synchronize incoming.

  Thank you
  Fati

• Satellite P300D - problem with reboot after update the HARD drive

  Hello

  I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

  Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

  Does anyone have a solution or a tip or something? If you do not understand something to tell me,

  Thank you very much

  Hello!

  I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
  Maybe it works

  And updated the BIOS, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck and give us feedback! :)

• Problems with secondary after building the application .exe

  Hi people,

  as I like am a self taught Newbie on LV and TestStand I have some problems with the construction of an exe file.

  I don't know if it is a question of LabVIEW and TestStand, so I posted this question in the two Forums.

  I use the interface simple chart that came with Teststand and added a secondary. TestStand is supposed to open the called VIs dynamically in this secondary.

  I used the code from the tutorial respective http://zone.ni.com/devzone/cda/epd/p/id/6278

  Everything works fine until I build the application. The screws are then open in pop-up windows clean AND in high school, but only the popup version is usable.

  I hope that I am too dumb to find the answer and that there will be a quick solution.

  If you have built the exe in LabVIEW 2009 selected in the configuration of your adapter TestStand and LabVIEW 2009 and your screws have been opened and saved in 2009 LV?

  

• I have problems with my keyboard change the meaning of the keys.

  I went to "fix" but said he could not fix it. ".  2 errors: problem with ISATAP adapter #9 driver and hardware problems currently my TAB key displays all the runing programs and my shift cap links P in Media Player.  Concerned may by a virus.  Note reciently installed keyboard perferial... works well for the last several days...

  Help, please

  Tina

  Hi Tina,

  Thanks for posting in the Microsoft community.

  I understand that the keyboard does not work on your computer. The Fixit you ran reported errors with ISATAP problem and hardware.

  Try the methods and check out them.

  Method 1:

  Check out the link and follow the steps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Check out the link and follow the methods in the article.

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520/en-us

  If the problem persists then let us know so that we can provide more steps.

   

• Problem of Listener after changing the host name & ip address of a node

  Environment - Oracle 11g R2 is installed in the OEL 5 (node Oracle VirtualBox). Voluntarily, I changed the IP address and the host name of the node for use as a node pending. What are the changes that are needed to make in listener.ora and tnsnames.ora file?
  
  Thanks in advance.
  
  Kind regards
  Sandy
  
  Published by: 918868 on October 26, 2012 20:21

  issue following commands OS below

  lsnrctl stop
  CD /home/oracle/app/oracle/product/11.2.0/dbhome_2/network/admin/
  MV listener.ora listener.ora.sav
  lsnrctl start
  lsnrctl status
  # now wait 65 seconds before continuing as below
  lsnrctl service

  COPY orders & results from above, then PASTE it back here

• Problem with calendar after changing themes

  Hello world!

  I encountered a strange problem... After I changed my theme it is imopssible for me to add a date years for a new contact, impossible to save him!

  Someone has an answer for me?

  Thanks in advance!

  And did anyone know why the asterics remains on my icon instead, I read all the messages in my new...

  Have you tried a battery pull? With the machine on, remove the battery for 10 seconds then put at the back of the unit and let it boot normally.

• Problems with iphone6 after downloading the iOS 10.0.1

  I was wondering how to solve the problem of the position of dramatic impoverishment battery install iOS 10.0.1? Called support and they do not know how to fix it. Basically battery comes out from 100 less than 20% in less than an hour and it started happening after installing 10.0.1

  It may be a 3rd party app which is not yet compatible with iOS 10. Have you checked your battery use to see what app is to eat your battery? Settings > battery

• Anyone having problems with crashes after setting the units (lb/po2) on an indicator on the dipstick?

  I use an indicator of money gauge to show pressure. With no set of units, everything seems to work properly. When I set units 'psi' and immediately try to save LabView hangs and crashes immediately after each next attempt to open the file project or VI. I'm using LabView 2012 (12.0f3) 64-bit on Windows 8. It is the first crash, I had. Unfortunately, it seems that the file is corrupted and I lost a few hours of work. Now I'm afraid to continue using this VI of fear he crash of something else and corrupt the file and I'll lose my progress. Any help would be greatly appreciated. I presented the crash to the settlement report, but who knows how long it takes to move to study the problem.

  Hi Arcus,

  If you search the forum you will find a large number of "moaning" on the buggy and incomplete unit support in LabVIEW. My favorite is the square function (available from LV2009?) which will follow "4 m" when you want as the square of "2 m". Of course: meter ^ 2 is always meter. And we're just talking a very basic unit...

  

  You will also find on the controls of the money bug reports.

  Combine all these threads in your own conclusions!

  I don't use controls of the money, and usually I stay away by using units of our days...

  BTW: I would also stay away from units such as "psi". Just my continental Europe perspective

  (Once I got to work with a machine (treatment of semiconductors) produced in the United States. She had 4 gauges next to each other using 3 different units: lb/po2, inHg, Torr. There must be a reason to do it, but have you ever needed to compare these pressures? Easy to remember these conversions...)

• Problem with redirect after save the wav file

  I have a photo booth / audio that we created with flash that take a photo and record then it records audio testimony and records it.  My problem is that, once the wav file is saved, I want to redirect them to a thank you page but can't seem to find a way to do it.  Here is the code that I use to manage the registration of the wav file.

  private void recordComplete(e:Event):void

  {

  var request: URLRequest = new URLRequest ("save - file.php '");

  var loader: URLLoader = new URLLoader();

  request.contentType = ' application/octet-stream ";

  Request.Method = URLRequestMethod.POST;

  Request.Data = recorder.output;

  Loader.Load (request);

  navigateToURL (new URLRequest (redirectPath), "_self")

  }

  I tried to add the navigateToURL at the end and it sends to this page correctly, but the wav file is not saved.  I was wondering if there was a way to determine that the file is saved and then redirect to a thank you page?

  Thanks in advance!

  -justin

  replace

  public var redirectPath:String = "http://localhost/thankyou.html";

  with

  not sure that this should be public but it won't matter for testing.

  public var redirectPath:String = "http://www.adobe.com";

• 2 problems with slicing and change the color of a section

  Hi guys,.

  Pretty new on this Forum...

  Well I'm new to Fireworks and I have a project for the College to do... .This is what I try to reach it please help!

  I am trying to create an image rectangle can I use as my main content area, that is to say rectangle with a roundness of 20% filling would be black, I would like to know how I can make this look as it is see through (I can see half of the background image) it would be its transparency or opacity level? I'm not sure.

  Then, I want to do this export and import the given in dreamweaver, I know you use the tool range but when I cut a picture of roundness and export it, it do not crop it should I can still see a little white around the corners... hope that makes sense!

  then how can last thing, I insert this into my main content div tag?

  Sorry for the million and a Q... I'm a member of the site tutorial video macPro and they have not a tutorial for Fireworks... is there a place I can get

  which has lessons starting good for Fireworks, I know youtube is good, but can be confusing at the same time and messy.

  Thanks in advance for your help...

  "Image 1 has just the round standard all round edges, image 2 has ridges on the corners of the 2 first and then around the edges on the lower corners, they also have the transparency / opacity, I am looking." I'm really looking to see how to make the image 2. »

  Ok. I see what you're trying to do. Draw the rectangle on a transparent canvas. Reduce the opacity of the fill you want. Optimize in the Control Panel, set the file format to export PNG 8, indexed for adaptive palette, 256 colors and transparent matte color. Select Alpha transparency. Export.

  Note that the transparency of the image may not display correctly in Internet Explorer 6 and earlier without a specific markup. You can read about it here:

  http://www.sohtanaka.com/Web-design/PNG-transparency-in-IE6/

• Problem with Photoshop after buying the creative cloud for teams for 1 year

  Hello

  I just Creative Cloud teams (one year subscription) (Mac/Win, several languages) and updated my photoshop, but when I go to open it, it asks me a liscence number.  Where can I find that?

  
  

  Refer to this:

  Connect you or activation errors

  Mylenium

• Problems with editing text in the window Live in shared Mode

  I use CS3, because that's what we had in this work, that I am.  Recently, I had the chance to go back to CC, when we went to CC2015.  I had CC2014 on another job and worked with him OK.

  I work in shared Mode because I love to see both points of view.   But some things are go, I don't remember being a problem when I had cc2014 (not to mention earlier versions).  I remember very well by clicking on the text in the 'live' view of the page, I'm working on and seen the code section moving to the same piece of text - but not now. And I also don't seem to be able to modify in the pane is 'live'.

  I'm doing something wrong? Or is there a setting I need to change?

  You very probably work in Design mode in previous versions, which will go to the Code view for the correct lines when you click a Design element.

  Live View edition is new, CBWMS and previous versions had no direct editing feature at all.

  Click on the small triangle next to the Live button in the toolbar and select design, it should work more as you describe from there.

• Problem with joining photos for the Windows 8 library mail program and error message 'create an association in the default program control panel '.

  Original title: E-mail question

  I want to send pictures of the library in Windows 8. Cannot do. He told me to create an association in the default program control panel. Been there, no help.

  Hello Jeff,.

  Please keep us updated on the status of the issue.

  I will certainly help you in the right direction to solve the problem. However, I would be grateful if you could let us know that you have set the email client that you use as default to the Control Panel program to send and receive electronic messages from the computer.

  Please respond with the requested information, in order to help you solve the problem.

  Thank you

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!