Problem with windows 7 and infrared remote control

Hi since I was in windows 7, I can't get the remote working again on my laptop HP Pavilion HDX X 16 - 1160US 16-inch I downloaded the correct drivers for it but it still does not funtion... You guys here could help me get the correct drivers or some magical driver that would work? Thank you


It is the only rider I can think.  Download and save it to your desktop.


When the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  When finished, restart the norebook.

Best wishes

DP - K

Tags: Notebooks

Similar Questions

  • Problems with Windows Update and load XP SP3

    I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

    After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:



    KB915800 v4



    KB2618444 (Windows IE8 security update)

    I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

    Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

    It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.

  • Problem with windows update and Service pack 1 for Vista 32 bit.

    A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

    A problem with Windows Vista
    Windows Vista has stopped working properly.

    This problem has been corrected in Windows Vista Service Pack 1 (SP1).

    What is a service pack?

    An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

    To resolve this issue, follow these steps:
    Determine if your type of operating system 32-bit or 64-bit.

    How will I know if my system type is 32-bit or 64-bit?

    Click the Start button, right-click computer, and then click Properties.

    Under system, you can view the system type.

    The average of 32-bit and 64-bit?

    Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

    For more information, go online and read this article for Windows Vista online help:

    32-bit and 64-bit Windows: frequently asked questions

    Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

    Windows Vista Service Pack 1 for 32-bit systems
    Windows Vista Service Pack 1 for 64-bit systems

    In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

    In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

    Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with Windows Fax and Scan.

    I have a Canon MG5420 and Win7 64-bit.  All of a sudden, the Office does not see the scanner.  The print function continues to operate correctly.  Problem occurs regardless of USB or WiFi connection.  The only change in my system is a migration towards Office365.  Other than that, no change. I tried all the basics: refreshed drivers, uninstalled the printer and re-installed.  Any thoughts on what could be the cause?  I get the message error is "No. scanners were detected.  The utility Scan Canon IJ can see the scanner, but I prefer to use the Windows fax and scan.  Any ideas?

    Unfortunately his is possible because there are different drivers and stacks of driver for the printer and the component the same multifunction device installed on the client computer scanner. In a case when the right printer driver is installed and available from the scanner driver may be missing or may be incompatible with Windows Fax and Scan requires the parser must be WIA 2.0 compatible, a TWAIN compatible scanner only for example will not work with this app).

  • Ad hoc problem with windows 7 and my I protect 3

    Hi I have the same problem with windows 7. It worked perfectly, last week and it now has the same msg. I followed the steps and it does not always help you. It works if I am close to a router and then I can put in place a special but will come with errors as the wi is off and it then resets it. Once reset the same msg saying windows cannot implement... Please help I use my I pad for virtual dj
    Now it is set up, but have a problem. It says no network share and it let me use something else, the I pad I joined and it shows on both devices, but does not open virtual dj. It worked last week


    These links may help you.

  • Anyone having problems with Windows 7 and the HP LaserJet P2035n?

    It seems, after a few months of service, there are several problems with this printer and Windows 7 only.  We have several offices that use this printer and almost each one has similar problems.  It will printer randomly disappear, not being able to print anything at random times of the day, to the spooler crashing every two minutes or more.  There is no problem at all with Windows XP or Vista, only 7.  Reinsalling the printer driver takes care of the problem for a few days, but the questions up all over again.


    The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the Technet forums below:

    TechNet forums

  • Problem with window painted and scrollbars when editing (LabVIEW 8.0.1)

    I'm under LabVIEW 8.0.1 in Windows XP SP3.  For my main VI, I came across a strange problem about 5 months ago.  The front window - both in edit mode and run mode - arrested repaint itself on the right side which is no longer visible when you scroll from top to bottom, but also visible overlapping Windows.  Coinciding with the repaint problem, both bars scroll search disabled grey arrows and no boxes in the bars that you can click and drag to scroll the window.  The scroll bars work still partially if you pass the mouse over it and roll the mouse wheel but does not work by clicking and dragging.

    The façade has a lot of controls and indicators, including containers of tab control and is greater in the horizontal directions and vertical so the two scroll bars must be active.  But I deleted everything in the Panel before and everything in the schema and the problem persists.  If the problem is not directly related to a control/led display.

    I saved the simple VI to this problem (using a line of large text and a high box rounded to test), and then created a new VI and copied the two elements at the new VI.  This new VI didn't paint it and the problem of the scroll bar.  The two screws are slightly different in the memory usage and the revision number (bad is review 1785 and the good is revision 3), but otherwise the two screws are identical.  I have attached two screws at this announcement.  When you first open the bad VI, you will see the scroll bars disabled while the good VI has active scroll bars.  To replicate the repaint problem, scroll the window up and down with your mouse wheel.  If it's good when you first open the VI, click on another window, then click on the window of VI and try again the mouse wheel.  This by clicking sur-loin-and-return always causes the problem of repaint for me.  I tried the screw on two different computers, both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.

    Here's what I discovered simple troubleshooting with the screws:

    always off scroll bars

    * repaint the problem in the main window for larger then 680 pixels of window widths

    * repaint the problem in the menu bar of the main window for widths of more than 646 pixels

    * entire window becomes disabled than 1348 pixels window width

    * can paint window minimize and restore, but only repaints only once

    * scrollbar boxes sometimes flicker in the display, but then disappear

    * Scroll left and right hovering mouse over the bar and horizontal scroll by using the mouse wheel

    I found something similar on this forum (thread: problem with refresh of façade)-it could be linked to the CAR on the Panel being offset internally.  I don't have access to LabVIEW 8.5 or later and do not plan to upgrade - I have not tried the trial version, as this user has done.  I could try to copy and paste my set of the block for a new VI diagram but the VI is so important I'm afraid something would break, plus I don't want to do it again in a few months.  The problem seemed to occur after a certain number of stops (or revision number).  I save copies of backup often and when the problem first happened, I was able to go to a previous version, make the missing changes and save it without any problem, but this only delayed the problem and he came later.  It is therefore perhaps the revision number.  It seems not related to a change or a particular addition in the front panel and the graph.

    The attached picture shows the repaint problems and scroll bar in bad VI.

    This raises a question I have - if this problem is a bug has been fixed in 8.5 and later, is it possible to apply bug fixes for older versions?  Or what I need to pay for an update fix these bugs?

    Seems that something got corrupted with this VI. Things to copy on a cool VI and things should be OK.

    See also this recent report of a similar problem.

  • Satellite U500 - problem with Windows 7 and HSDPA USB modem

    My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

    A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
    Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

    I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
    It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

    Thank you and best regards.

    I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

    In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

    Have you tried to test the features with the Win7 32-bit version?

  • Problem with Windows Explorer and the recorded files

    When I save files from the internet and then open the folder with Windows Explorer in the backed up files, I find that WE consider not save them on my hard drive "change" more. I know it's strange, but I tend to retain files roughly in the order that I saved them, rather than by the name of the file or anything else. So now to manually change the files in a certain way, then save them to get them organized as I want. Of course, this can become very painful and long if I have a lot of files to organize this way. My question is: How can I get Windows to consider saving a file on my HDD as change? I use Firefox and updated recently, which may be the cause of the problem.

    Hi Flingle,

    Were you able to save and access files correctly before you update Firefox?

    You can create a new folder & try to download the file inside of Internet Explorer & check if the problem persists.

    Hope the helps of information. Please post back and we do know.

    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with windows update and get Vista service Pack2 installed

    I'm running Windows Vista Home premium with service pack 1 installed. I have 2.00 GB of memory and running a 32-bit operating system

    When I open some websites it comes immediately closes and you said "Internet explorer cannot open this site" then the cottage site and says '' abandoned operation. ''

    So I thought I would upgrade my system. Whenever I have shut down my computer it asks to install updates - I have let that happen, it always lists the same updates and even though it shows that they have been correctly installed. Next time I'll look in the list of updates - the same updates appear. When I try to update to Internet explorer 6 to 8 or 9 it says I need service pack 2. When I try to install service pack 2, I thought after I have started to install pack 2, service pack 1 must be installed. When I download and try to install service pack 1, it indicates that service pack 1 is already installed.

    Any ideas on how to get my internet explore updated would be greatly appreciated.

    Thank you

    I have version 6.0 (build 6001: Service Pack 1)

    My internet Explorer is:

    Version 7.0.6001.18000

    Thanks for your help.

    When downloding a new application, applet, or executable file or program msi, I always choose to SAVE them to the DESKTOP, then I make a folder and copy the downloaded file to the new folder when the program is fully downloaded, I then run my hand registered antivirus program to ensure that it is virus-free. (right click, then choose scan with "antivirus program").

    Once I know it's clean and stored safely, I disconnect from the internet, disable my antivirus program, & close all processes not essential in the Task Manager.

    Then go to the folder "New folder" and double-click the new application to install it without interference.

    Once it is installed, restart your computer to start your antivirus program and already completed process automatically and then if it needs to access the INet activation or registration, it can do so safely.

    It a new application and ask you if that's OK, you know is very well since you just installed it will say your firewall.

    I've never had a problem with failed facilities or other interference from program using this simple step-by-step process.

    Methods to download the latest service pack (VISTA SP2)

    Method 1: Turn on automatic updates (recommended for most users)

    Method 2: Check the updates on Windows Update (same method 1 but not automatic)

    Method 3: obtain the latest Windows Vista from Microsoft Download Center (full file) service pack >

    (Good to use if the computer on which you want to install the service pack is not connected to the Internet)

    Go to> and look right.

    Things to know about SP2 and FAQs.

    Examine them carefully and see if it meets most or all of your questions.

    You will also notice the site available for full download download which can be used instead of the Windows Update. service

    As you can see Vista SP2 contains all updates released since SP1, download via AU (automatic updates) you get only what you need, by downloading the full file all you and you have it if you like for later if you need IT.

    For Service Packs, I prefer to download the entire file and then install offline after you have prepared the system first.

    How to obtain the latest Windows Vista service pack

    How to install or uninstall Internet Explorer 9 IE9>

    Support for Internet Explorer in this forum:

    04/12 / 1109:16: 23 pm

  • Facing problems with Windows Update and other performance issues.

    Hi, I have a Windows 7 (64 bit) for HP Pavilion dv6 laptop. Since January 5, 2014, my computer had problems. Windows Update stopped working. Whenever I try to run it, it says that the service is not running. When I try to set the agenda by running Microsoft Fix it, an error occurs. It says "Troubleshooting cannot continue because an error has occurred" and when I try to repair Microsoft Fix it with "DIAG_MATS_NETWORK_global", it does not detect any problems. The first time I met the problem was when I tried to play Minecraft; It wouldn't connect and when I tried to relog I get a "SocketException: unrecognized Windows Socket Error: 86 create." Microsoft Security Essentials has update problems as well and my Hamachi can not connect. Skype and all my other programs and video games, such as League of Legends and Maplestory all will work perfectly well. I've looked everywhere in the Microsoft Web site and cannot find a solution. Please help me solve this problem!

    Thanks, but I fixed it! I used the Microsoft Safety Scanner, and it fixed the problem. :)

  • Problems with windows 7 and Adobe reader

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: When I want to open a pdf file adobe no longer works?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    This is a good and free alternative pdf reader.

    Foxit Reader 3.2 for Windows

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    Impossible to open PDFs in internet explorer 8 / Windows Vista Business

  • Problem with Windows Fax and Scan does not connect to the Internal Modem

    Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

    If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

    While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

    If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

    I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

    Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

    Sorry about that.

    Here is the link:

  • Problems with Windows Vista and Quicken 2010 home and business

    While restoring a quicken 2010 file backup of the Windows XP computer to the Windows Vista-based computer, the categories are not loaded


    As you are facing problems with Quicken 2010, I suggest you check the link for support:

  • Problems with Windows mail and sending attachments

    I use Windows Mail and my computer is running on Vista Home Premium.  If I try to send an email with attachment (any size, sometimes with very small files, but also of large files), it seems that the message has been sent.  It appears in the sent items, but it never really happens to recipients.  I even tried from sending me messages with attachments, and they never appear in my Inbox.  If I go to sent items and then click on it and will communicate the message reached the recipient with the attachment.  So strange.  What is going on.  It seems to be sent, but just diappears in space somewhere, acting as if they were sent, but who never reach the recipient

    My first guess is that its your antivirus software.  Look at there are a number of anti-virus just don't work well in WinMail, so see if that helps at all.  For example, if you have active scanning emails (or even if not) outgoing messages could have been blocked, but why are they OK transmission is kind of weird.  I suppose it could have to do with the database, then you can try compacting and repairing the database (see, but I doubt, it's going to do a lot.


Maybe you are looking for