Problem with windows using vmware fusion

I have a mac book pro and a part of it running windows 7 using vmware fusion. It worked great for 3 years and today I went to open the side windows and all I get is windows media player. Any button I go, medial player arrives. At Christmas, we received an e-mail that fedex was unable to deliver a package, and to download the shipping label to follow, it is phishing so could I have downloaded a virus? How to do this problem?

Thank you

Debbie

Hello

Welcome to the community forums of Microsoft and thanks for posting the question.

I suggest you to consult the steps mentioned in the article:

EXE by default association problem windows7
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/exe-default-Association-problem-Windows7/6becdf43-28d2-4eb5-B3E8-a7fcd0b5c69b

Hope this information helps.

Tags: Windows

Similar Questions

  • problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)

    Hello guys,.

    I have Windows 7 Pro 64 bit installed in Boot Camp and I'm running as a virtual machine using VMware Fusion OSX 10.6.6 3.1.2.

    The problem I have is that the ethernet does not work under VMware, even with VMware Tools installed.  Device Manager shows no driver installed.

    I googled and found a lot of suggestions to add ethernet0.virtualDEV = "e1000" to the simultaneous file, but I looked and this line is already there.

    I tried reinstalling VMware, VMware Tools, the Boot Camp drivers, NIC Add/Remove VMware settings, change NAT to the deck and vice versa. Nothing works.

    Any suggestions?

    https://lh4.googleusercontent.com/_qDIDeytLvLA/TXJxhYNsHZI/AAAAAAAAFOI/9Vv056rj1RY/s800/Screen%20shot%202011-03-05%20at%2011.22.48%20AM.png

    The CARD is an Intel PRO 1000 MT and uses the E1G6032E.sys driver that is located in the:

    C:\Windows\System32\DriverStore\FileRepository\nete1g3e.inf_amd64_neutral_7f08406e40c6ede2

    You will need to copy the 3 files to a temporary folder or on the desktop to be able to access it from the device for a manual installation manager.

  • You can transfer documents created in Office for Mac Office for Windows using VMWare Fusion?

    I have a Mac and have documents created with Office for Mac.  I have now installed FMWare Fusion 7, Windows 7 and Office 365 Personal on the Mac, but I can not access existing files when you use windows or transfer them to the virtual drive.  Is it possible to do either?

    Take a look at: files between Windows and Mac sharing your & Sharing Applications between your Mac and your virtual Windows Machines

  • Problems with windows 98 in VMware 6.5

    I have problems with Windows 98 in VMware workstation 6.5. I can't get the screen resolution is greater than 800 x 600 or higher than mode 16 color mode color. No 16 - bit. Mode 16 colors. Also, I can not healthy work and does not include the link to the note tech sound on the guest98 Workstation 6.5 support page and even the link which is he's dead. I suspect that resolution and color mode problems have to do with crap, generic video driver emulates fun. Is it possible to use a better? On the issue of sound... no idea.

    My material is important? I can post the form if you need.

    I have not noticed any unknown devices in Device Manager and I'm not having problems restarting.

    Any help would be greatly appreciated. Thank you.

    OK, I dug my Win98 guest and did some tests.

    First of all, I want to apologize to you.  I proposed to install the wrong driver - it bluescreens my guest as well.  I'm really sorry for all of your time, I lost.

    Http://sanbarrow.com/vmx/vmx-sound.html , I find that the default sound card is a "ES1371.  Looking for this model on the web site of Creative gives me another driver.

    The driver that I downloaded is called 'epw9xup.exe' and is 976 KB in size. I get an error unable to 'load newest MIDI', but I get audio startup after you install the above driver.  I hope that your game requires no MIDI...

    Be sure to take a snapshot of your guest before you try to install the driver.  That way if something is wrong you can just go back to the previous snapshot.

    Please try the above driver and let me know if it works.

    I'm sorry to give you the wrong information.

  • I had problems with windows live mail, I uninstalled it, now I have no e-mail at all, can you help me. I've been using windows vista

    I had problems with windows live mail, I uninstalled it, now I have no mail at all, I was using windows vista

    Hello

    You can download, install, and configure Windows Live Mail again or use Windows Mail, which is the default email program in Vista.

    How to set up Windows Mail.

    Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.

    Ask them to:

    1. your username with them

    2. your password with them.

    3 incoming mail POP3 server.

    4. the outgoing mail SMTP server

    All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.

    You can use this guide to set up Windows Mail:

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

    See you soon.

  • have a problem with windows mail using vista, it won't send mail it's just continues to ask the user to verifery a password

    windows Vista mail problem

    have problems with windows mail with vista, it will not send an email he just keeps asking to verifery user, a password have checked all the settings a knowledge they are correct... can connect to the server an everything is ok... get this error msg... Account: 'att.net', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] invalid username or password. (#YSH001)', port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92... on this for 2 days may not understand... Please help?

    Hello

    I suggest you to follow the steps in this link and check if it helps:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

    For more information, see this link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

    It will be useful.

  • problem with windows mail (using Vista) after automatic updates installed

    After the installation of the automatic update of windows I can't receive or send email on windows Messaging.  Get the box asking username and password and when I did, he asked again.  Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates?  I can access my email on the site, so is not their problem but with my computer.

    Hello

    Try the following methods:

    Method 1:

    Try to download and reinstall Windows Mail using the link:

    http://support.Microsoft.com/kb/941090

    In the link above, go to download and install the update.

    Method 2:

    Solve problems with Windows Mail

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

    Reference:

    Working with Windows Mail in Windows Vista

    http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  • Problems with Windows Installer after using System Mechanic.

    I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

    So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

    Thank you!

    original title: Registry Cleaner/Windows Installer

    So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

    1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

    2. follow the four methods listed in the resolution section of the following article:

    http://support.Microsoft.com/kb/2642495

  • Port sharing ethernet physycal between the Mavericks and Ubuntu using VMware Fusion

    Hi all

    I use VMware Fusion on Mac OS Mavericks 6.0.2, and I need to connect a physical device to manage using a Ubuntu 12.04 VM. In addition, the host computer is connected to a public network, using a Wi - Fi connection.

    I put the ip of the physical device by USB configuration, but I was unable to get by using ethernet or the guest or the host computer. I tried to configure the NIC of the NAT guest, as well as the bridge too. Nothing seems to work. I don't know if the virtual machine is able to handle the physical Ethernet port.

    Ideas for the configuration of the network device (NAT, bridget, etc.) or the ip configuration?

    Thank you very much in advance.

    Sorry, I left an important step.  You must also configure the host's Ethernet card to use a manual IP address in the same subnet assigned to the Virtual Machine and the sensor.

    1. connect sensor card via USB and set the IP address and subnet mask, disconnect USB.

    2. connect the sensor to the host (Mac) Port Ethernet card.

    3. in the Apple menu > Preferences system... > network > Ethernet > configure IPv4: manually, then set the IP address: and the subnet mask: properly.

    4. from the Virtual Machine settings > network adapter > Bridged Networking > Ethernet

    5. in the guest OS virtual machine to set manually the appropriate IP address and subnet mask.

    Example:

    The IP address of the host on the Ethernet adapter: 192.168.3.1 subnet mask: 255.255.255.0

    Guest OS Ethernet adapter IP address: 192.168.3.2, subnet mask: 255.255.255.0

    Sensor onboard IP address of the Ethernet card: 192.168.3.3, subnet mask: 255.255.255.0

    In this example, the sensor Council will be addressable by the host or the guest to 192.168.3.3.

    BTW I just tested it using my Thunderbolt Display Ethernet with a normal cable (straight not crossed) RJ45 connected directly to a device addressable IP, VMware Fusion and a virtual Windows machine.  Although the same works with an Ubuntu VM as I have in the past also.

    This should work without any problem but make sure that the firewall or other security software on the host and guest are not blocking communications!

  • BlackBerry curve 8330 sync problem with windows xp

    Hello guys,.

    I have problems of synchronization of my new blackberry curve 8330 with windows xp on vmware. I have a macbook, one that can run mac os and windows os. For work, I have TO use windows, so I run windows xp using vmware fusion. On windows, I've run my database, I synchronize with outlook 2003, and then synchronize outlook with my phone.

    I used to have a treo 600 and did very well. but with the blackberry, it's Hell!

    I uninstalled palm hotsync and downloaded blackberry Desktop Manager 4.7 on my vmware windows) side of my mac. The problem occurs when I connect the USB with the laptop and blackberry. the wmare window shrinks (goes from full screen to half of the screen and the screen turns black), with an error of vmware:

    "The 'Research In Motion RIM Composite Device' device was unable to connect to its ideal host controller. An attempt will be to connect this unit to the best available host controller. This can v undefined behavior for this device. »

    I click ok.

    then the display returns to live (not black) and usb takes over the device (showing on Device Manager), also showing the connected device and PIN on the Desktop Manager (DM). On the dm, I can set up the calendar, notes, etc. for synchronization (outlook sync with the device or replace one or the other). but when I click the sync button, nothing happens, no synchronization occurs, or the device on outlook, or dm.

    Lately, I did the following: go to the control panel of USB devices on the settings for this virtual machine window, and then select enable USB 2.0 support. still nothing...

    don't know what to do, any help would be greatly appreciated.

    Thank you

    --H

    Another question - the Blackberry is displayed in the Device Manager window?

  • I have problem with windows update

    I have problem with windows update

    and I can't find the Hebrew pack in windows update?

    I have windows 7 ultimate

    You use this procedure: http://support.microsoft.com/kb/972813 ?

    Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

  • Problem with windows update and Service pack 1 for Vista 32 bit.

    A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

    ------------------------------------------------------------------------------------
     
    A problem with Windows Vista
    Windows Vista has stopped working properly.

    This problem has been corrected in Windows Vista Service Pack 1 (SP1).

    What is a service pack?

    An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

    To resolve this issue, follow these steps:
    Determine if your type of operating system 32-bit or 64-bit.

    How will I know if my system type is 32-bit or 64-bit?

    Click the Start button, right-click computer, and then click Properties.

    Under system, you can view the system type.

    The average of 32-bit and 64-bit?

    Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

    For more information, go online and read this article for Windows Vista online help:

    32-bit and 64-bit Windows: frequently asked questions

    Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

    Windows Vista Service Pack 1 for 32-bit systems
    Windows Vista Service Pack 1 for 64-bit systems
     
    -------------------------------------------------------------------------------

    In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

    In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

    Ralleny,
    Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

    Hello, everyone!

    Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

    For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

    Thank you very much!

    Hi EvanaZgb,
    Thank you for visiting the Microsoft Answers forum.

    I would say to first disable the anti virus and other security software. Then proceed as follows:

    STEP 1
    ------------
    Download and install the latest version of Windows Installer
    To install the latest Windows Installer, visit the Microsoft Web site at the following address:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    Step 2 now try to update again and post back with the results
    ------------
    Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

    Now try to update again and post back with results

    Thank you

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Big problem with Windows XP, IE8

    I have a big problem with windows xp. Many things do not work as they had passed him. For example the personal setting are not recalled from session to session. IE 8 does not funtion properly (icons on the desktop are re-arraged, toolbars cannot be deleted or I'm unable to load pages from the internet). Programs do not work, the files will not open. When I look at my hard C disk folders and files are hidden.

    Recently, IE has been upgraded to IE8 and I installed Norton 360 but I don't mean that they caused the problem. However, whenever the Norton scan executes a "error 8 506 421" stands up and says me that I have to uninstall and re install Norton.» But I lost the ADMIN privileges so I am not able to uninstall or go back to a restore point.

    I can't go in safe mode. Pressing F8 takes me to the quick screen C not the windows safe mode screen. I can't go in safe BOOT mode. INI or the other.

    If I switch to another user, everything seems fine but I don't have ADMIN privileges with this user to be able to make changes.

    Is this a problem with norton? IE8? A virus?

    Any thoughts will be greatly appreciated.

    Thanks in advance,

    Lost without a computer

    It sounds like you have a corrupted for your user to administrator user profile.

    You may be able to recover using System Restore to restore to a point in time before your problem.  Based on the F8 key, you bring in a command prompt window, try to start restoring the system to the command prompt by using the following procedure:

    "How to start the System Restore tool by using the option of safe mode with prompt theCommand in Windows XP"

    <>https://support.Microsoft.com/kb/304449/en-us >

    If this does not work, you can still be able to recover by performing a check disk to your command prompt window operation (after that you press the F8 key).  Enter the following command:

    CHKDSK c: /R

    If you are in the Recovery Console, it can simply begin, or you may need to restart before it will start.  Corrupt profiles are most often caused by the Corruption of system files, so a chkdsk operation should be performed little matter how you end up recovery.  Note that this can take a few hours to run.

    "How to perform disk error in Windows XP check"

    <>http://support.Microsoft.com/kb/315265/en-us >

    HTH,

    JW

  • The problem with Windows update - automatic updates service won't start not (error 126)

    original title: the problem with Windows update

    Please help me to get Windows Update operational return.

    XP Media Center Edition, Version 2002, SP3

    Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
    http://support.Microsoft.com/kb/931852

    Seems to have cleared the error message.  So far so good.

    However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

    I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

    I already followed several instructions on this subject:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

    In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

    I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

    Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

    [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

    [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

    [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

    [4A]... is there a possibility that some of [my data are] infected?

    [4] preventing me from simply infect the whole PC again?

    A1. Yes, and it was my recommendation in August, too.

    A2. Yes.

    A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

    A4a. Yes, a real possibility.

    A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

    If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

    If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

    Once again, good luck!

Maybe you are looking for

  • Error Code 80071AA7

    I received the automatic update of windows Vista and another program and tried to update and receive error code 80071AA7. I could not find data on this code on microsoft. Thoughts, or ideas what this code means?

  • T400 screen "blinking" every 5 seconds

    Hello. I have a T400 running Windows 7. Last week, I had a problem with the screen flashes (like an eye by opening and closing) every 5 seconds or so - it starts after I have he awakened from his sleep. I had installed new updates, so I went back to

  • Print colored

    I have a printer 6510 colorful printing quality degraded even if there seems to be the ink in the cartridge, so I cleaned the print heads with no improvement. The blue did not work at all so I changed the cartridges with no improvement the blue still

  • OfficeJet pro 8500 a909a: try to go to with a HP officejet Pro 8500 wireless

    I just moved.  My fax in my old address connection came a "bundle" and has been through a fixed line.  I wonder if my oldest device is able to make a wireless upward set, or I'll have to stay with a land line and a phone number for the fax works corr

  • How can I make my full screen wallpaper? It appears like that but now you just see the image at the Center with black borders around. WIndows 7

    I have WIndows 7. My office used to demonstrate the sreen integralexecuterdes but now some re cropped images offshore or too small for the screen showing the black border around the image.