Problem with Windows Vista Business

Vista restarts continuously this morning. Try to run the update 3 0f 3, then restarts.

Hello

I guess that part of the question could be a driver which is really old or similar should not be loaded.

This exit Windows updates on (after you have access) and stop the updates of the driver to load.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

---------------------------------------------------

You can use the solutions in this KB - 3 methods and I listed a little help for them below

The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358

Method 1: Start Windows Vista with the Windows installation media and use the repair feature

How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.html

You can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.

This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

Try recovery options Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

Method 2: Start the system in safe mode and then use the system restore feature

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

You can also do a restore of the system of starting with a Vista disk.

Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
x 64 64-bit.

The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358

------------------------------------------------------

Once you are in Windows I was running once again reset here as a precaution.

How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058

Hope this helps sort it out for you and happy holidays!
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Compatibility issues with Windows Vista Business

    Could not install Oracle 10 g/Microsoft SQL Server 2005 on this 32-bit machine. Windows Vista Business.It is machine Lenovo Thinkpad with 3 GB of RAM. Installation ends abnormally. Can install Oracle/SQL Server 2005 on Windows Vista or should I change to Windows Xp professional? Are there problems of compatibility with Windows Vista Business? How should I upgrade so that I can install Oracle/SQL Server etc for my development/practice work?

    Context/Back ground - as a developer I want to make some practices in Oracle 10g, MS SQL Server on this computer. I have the licensed version of Windows Vista on this Lenovo Machine. Please tell me how I can upgrade to Oracle, SQL Server etc can be installed on this machine.

    Thanks for your suggestion.

    Pratim Chanda Pankaj

    India

    Hello

    The question you posted is more suitable in the TechNet Forums. Please post your questions in the Microsoft TechNet forums to improve the assistance.

    Here is the link: http://social.technet.microsoft.com/forums/en-US/category/windowsvistaitpro/

  • I have a computer with Windows Vista business on her key. I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

    Activation of WINDOWS VISTA oem with another oem drive?

    HI I have a computer with windows vista business on that key. Apparently, I do not have the original OEM drive but I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

    Hello

    A manufacturer of recovery disc is designed for a particular brand and computer model; they are not interchangeable.

    Here is the link to order the Acer recovery disks:

    http://us-store.Acer.com/RCD/

    And if the Acer never included a drive to purchase, you should have a recovery Partition on your hard disk to reinstall Vista to how it was when new.

    With an Acer, you press Alt + F10 at startup to start the process of recovery back to new condition.

    See you soon.

  • Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

    original title: problems with Windows VISTA update

    I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

    1. 9 47 code
    2. Code 800070002
    3. Code D 80024200.

    Is there a resolution to do the same thing?

    Hello

    Did you change your computer?

    I suggest you to follow the methods and check.

    Method 1:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Method 3:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    http://support.Microsoft.com/kb/947366

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • PC with Windows Vista Business OEMAct COA of second hand

    Hello

    I just bought a PC that has a Microsoft COA license sticker attached to it for "Windows Vista Business OEMAct" of second hand. It came without a HARD drive, so I installed my own and want to make sure that the key on the PC is still valid? If I can get my hands on a Vista disk, probably, I can install windows with this key and everything will be fine?
    The question I have, is that I can then upgrade to Windows 8 for the $39,99 deal? I don't see why not?

    Hello

    You must use the key to see if it is still valid. There is no public list kept.

    Hadou no reason why it would not be valid as long as you can not transfer OEM licenses which they were installed on the original machine.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    Read the inmformation of Microsoft on Windows 8

    http://Windows.Microsoft.com/en-us/Windows/buy

    See you soon.

  • Activation problem with Windows Vista Home Premium 64-bit edition

    Recently, I had a problem with my office that was running Windows Xp Pro.   After having tried to reformat the computer with my installation disc, something was holding me back upwards.  Thus, recently bought a laptop with Windows vista on it I used the disc that comes with it.  Note: I ordered this laptop for Windows 7, vista is no longer running on this laptop.  Everything installed very well on my office with the exception of one problem it won't let me activate windows.  Now, it's my copy of windows vista that I paid for.  It runs on a single computer in my office.  I have validated my software on my desktop and it's been validated.  Now why not activate Windows Vista?

    If Vista is preinstalled on your laptop, it is classified as an OEM license and is not transferable.

    The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
    You cannot transfer it to another computer/laptop

    If a license of Vista at retail, you can transfer it to another computer/laptop.
    But it can only be installed on one computer at a time.

    A single license is a single Installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • Problems with Windows Vista and Quicken 2010 home and business

    While restoring a quicken 2010 file backup of the Windows XP computer to the Windows Vista-based computer, the categories are not loaded

    Hello

    As you are facing problems with Quicken 2010, I suggest you check the link for support:

    http://Quicken.Intuit.com/support/Windows.jsp

  • Satellite A200-1d(a): various problems with Windows Vista Mail

    Model: Satellite A200-1d(a)
    O/s: Windows Vista editions Home Premium more
    Background: Recommended for a parent, now transformed into 'support harassment ".

    The behavior of Windows Mail is displayed is non-standard and unreliable, for example:

    Creating new folders local they are initially displayed in the list of folders (left sidebar), if the mail is restarted they disappear and reappear only if they are selected after clicking on "local folders". Other than the Inbox, local folders and the Microsoft? (used for notes, etc.), all the other default folders are missing, either sent, sent, drafts box, etc.

    Another minor issue is that windows mail does not seem to recognize when the status of the internet connection changes from unavailable to available, in order to empty the Outbox and send emails, it is necessary to restart windows Messaging.

    A number of occasions, all messages disappear from your Inbox and all other folders are not available, the only solution to this problem seems to be a reboot of the laptop.

    This link seems to suggest that there is a problem with the security software which is now Norton Internet Security (configured and bundled with the laptop):
    http://forums.techguy.org/all-other-software/551829-Windows-Mail-doesn ' t-display - messages.html

    I tried to disable email inbound/outbound scanning in Norton, but it made no difference.
    Next step is to apply:

    http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm

    and then remove Norton Internet security

    Any ideas?
    Other than the foregoing the laptop is fine, looks like a problem of s/w for me.

    concerning

    Ball

    Hello

    I can't provide an exactly the solution to this problem of Vista Mail but to me, it looks like a Microsoft Vista operating system problem and not Toshiba Satellite.
    I don t think there could be a problem with the hardware that's why we should look for solutions.

    Now you will ask where a software solution? In my opinion, you should check the knowledge base Microsoft for some useful tips.
    http://support.Microsoft.com/search/
    and the solution center in Windows Vista
    http://support.Microsoft.com/windowsvista

    But first make sure that your Vista operating system is up-to-date and you have already installed all the updates and patches!

    Good bye

  • Problems with Windows Vista Service pack 2: Code 8004402F; Code 80010108

    Well, I tried to download the SP2 for Vista Edition home premium, about a month ago and got the 2nd error code indicated. I recently tried again and got the first code listed. During the recent attempt, the achievement of the updated 3/3 but computer froze just after the restart and had to do a system restore.

    In addition, windows update cannot download updates... always says UNABLE

    And, I can't run/install programs downloaded such as to fix the windows update. I get a message saying "THE TEMP FOLDER IS ON A DRIVE that IS FULL or IS INACCESSIBLE. FREE UP SPACE ON THE DRIVE OR THE VARIFY THAT YOU HAVE PERMISSION TO WRITE TO THE TEMP FOLDER '

    I'm the administrator, I have more than enough free space on the disk, and I double checked that the permission is given to all temporary folders. Disk Cleanup is done frequently. SP1 is installed. I am running Trend Micro security and have tried with this option disabled.

    Help, please!

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • problems with windows vista startup

    2 days ago, that my computer was running an update. the computer has been accidentally disabled during the upgrade. the next day I got tired of the laptop start but I couldn't access it. When I turn on the laptop it says ""windows is not stopped successfully", then it gives me the opportunity to start in"safe mode","course with the command' or 'normal startup'.» When I click on one of these options, it takes me to the screen where I choose which user to log as long as. After I click on the user, I want to open a session on a black screen appears and it does not change. I see the cursor and I am able to move, but that's all I can do. in 'normal' mode, I try ctrl + alt + delete, but nothing happens (no window opens). in safe mode, I do ctrl + alt + delete and the window but when I click on restart, closed, logoff, or one of the options, nothing happens. I end up having to close the cpu by holding down the power button. I have no cd startup/recovery. I tried the F8 option but nothing happens. Please help me!

    Hello

    In Safe Mode does not allow to do something, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    ___________________________________

    There are several methods to reinstall Vista.

    This can help you (download files and make your own DVDs):

    http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon

  • How to fix problem with Windows vista to fail to load while a dual receiver wireless (for keyboard & mouse) is to plug it into any USB port?

    Turning on the PC with a wireless receiver (Microsoft model 1119) plugged to any USB port causes Windows Vista does not load.  Turn off the PC, unplug the receiver, put the machine, loads without problem.  Once windows is loaded, reconnect the receiver wireless Microsoft and less than a minute, the keyboard and the Microsoft wireless mouse works perfectly.  Device Manager does not take into account conflict of devices.

    Hello

    Thank you for keeping us posted.

    Check if the hard disk has been set as the first boot device in the boot coastal in Input/Ouput order Basic (BIOS). Otherwise, you can set the hard drive as the first boot device and check.

    Consult the manual of the manufacturer, to do the same thing.

    Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

    Hope this information helps.

  • Problem with windows vista, suddenly not to recognize a printer HP 5600 series that was printing correctly for 5 years

    Windows Vista Plug ' n Play does not recognize printer HP 5600 series. HP Solutions Center's says no HP devices detected. Using USP connect since the printer 5 years ago. Reinstalling drivers does not help. Installation with disc says printer is not connected (USB) to the computer, who she really is. Have tried all USB ports on the computer to see if plug ' n play would work. Any help in doing so. How can I solve this problem?

    Hello

    Uninstall and reinstall your printer by using the drivers and information on the HP website.

    Equip your model number of the printer for this information and troubleshooting for her.

    http://WWW8.HP.com/us/en/support-drivers.html

    Or ask in the Forums of HP's Support.

    http://h30434.www3.HP.com/PSG/

    See you soon.

  • Problem with windows vista knowing that I have a wireless device.

    Currently, I rebuilt an old laptop. I used a copy of windows, I confess, vista ultimate x 64. I installed this on the hard drive, then I partitioned to install a copy of Linux Mint13. Currently, I can load either the operating systems without problem. My problem is that on my Windows operating system, I have no network to connect to the internet in windows device is. I have a drive with windows on it, but I used to repair a unit. Now, when I use linux, which I do now, I can get online very well, because he knows that I got on the computer to use hardware wise. Why Windows Vista doesn't know I have wireless, etc. but Linux don't? Thank you in advance for any help.


    Your computer must also be 64-bit, it may not work on 32-bit computers.

    Try to download and install the latest driver wireless on the support site of the manufacturer of the computer specific to your computer model.

  • Touchpad problems with Windows Vista, HP Pavilion dv7

    For some time now, I had problems using the touchpad on my HP Pavilion dv7-1260 mobile.  When I press the left button of the mouse, I have the menu that is displayed when you press the right button of the mouse.  I changed the settings on a million times and I reinstalled the drivers, but nothing seems to work.  Maybe I need to change touchpad sensitivy or something, but I don't know how to do it on Windows Vista.

    Hello

    Looks like there is a problem with the hardware with the TouchPad so check with the help of HP, their online
    documentation and drivers and ask questions in the forums about isseu known with this model.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ========

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Problems with Windows Vista update error code I get is Code: 80096001

    Hi gang,.

    I need help I can get at this point. I am currently working on a machine to a customer who had the rootkit zero.access top. The machine works like a champ, now that it is all clean; but for some reason any Windows Vista refuses to update. Let me mention the operating system before proceeding. The operating system is Windows Vista Home Premium 64-bit. When I try to run Windows Update, the machine has a total of seven updates to install; This is especially important and option. In the important section, the machine is trying to install a security update and that is 9. In the optional section, the machine is trying to install the driver as updates: video, network, etc. The PC is already running Service Pack2. The error code I get is: 80096001. I tried every fix that Microsoft recommends, even the Microsoft Fix It tool. Nothing seems to work. I had a simular problem before in Windows XP. If my memory is good, I had to go to the entry in the registry of Windows Update and apply a DWORD here, or something; I don't remember exactly what I did. I can tell you that I checked the registry and there is literally no key to change in Windows Update. Any help or advice would be great, this question is about to drive me crazy.

    Thank you

    What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it is detected the last time that the system has been scanned with it?

    You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.

    (When was the last time you checked your system for malicious programs?)

    Suggest you try to have the system scanned both of the following in this order - do not jump...

    In addition to using an anti-virus, as Malware/spyware scan:

    http://www.Malwarebytes.org/products/malwarebytes_free>

    (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    In addition, scan with the free Version of (SAS)

    http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

    How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

    ESET Online Scanner

    http://www.eset.EU/ESET-online-scanner>

    Access the article KB971058 via Internet Explorer (only)

    If no malware is present - How to reset components Windows Updates?

    http://support.Microsoft.com/kb/971058>

    Download and Save the fix it 50202 from the page above.

    Close all the open browsers and programs prior to execution of the fix it.

    Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

    When he finished, check if download updates now.

    If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

    Then reboot and see if the download updates now.

    UTC/GMT is 19:30 on Friday, October 7, 2011

Maybe you are looking for

  • Firefox does not download. Production not exe.

    Deleted by Windows 7 desktop Firefox error.Downloaded Mozilla Fox. File has been "" Firefox Setup Stub 40-0-2 - exe ". Download came to download "area:.» 'Run', opens the window asking what program to use to open Firefox.

  • Quality of police after Firefox reset problems

    Since the reset Firefox fonts sometimes show default sizes hurt, but if I zoomed in several levels and then zoom out, the problem usually disappears. Solutions? Update: I found that just by clicking on the Office has also the problem disappears.

  • Camera work is not on Windows 10

    Hi, after installing Windows 10 on some PCs, I have no access to the camera on them in Skype. If I open the camera app, it works and not exceeding not black comes from the camera when using Skype

  • Why the addition of a reference to the rescue mailbox is inactive?

    Why the addition of a reference to the rescue mailbox is inactive? How to add boxes to the letters of relief to reset your question secret?

  • wiring NI CompactDAQ at DC source of vehicle

    Hello, I was wondering how go wiring in the CompactDAQ chassis to CC of the vehicle system.  the vehicle has a rear 72 volt battery and a 12 volt battery, which could be used.  At the moment, we simply use the power adapter supplied with the unit. Th