Problem with Windows Vista Home Premium SP2 do not update, will be upgraded to Windows 7 fix this?

Similar Questions

• Why not the Acer Empowering Technology for the launch of Windows Vista Home Premium SP2?

  Hello!

  I have Windows Vista Home Premium SP2 in an Acer Aspire 5920 G I installed Acer Empowering Technology, but the program does not start and a message that a problem caused the program to close and Windows will advise you if a solution is found.

  Help please.

  Thank you!

  Hello

  As software Acer Acer Empowring Technology, you will need to contact Acer directly on this problem with their software:

  http://support.Acer.com/us/en/default.aspx

  See you soon.

• Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.

  Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.  Have tried little about everything without success. AV is Microsoft Security Essentials, Norton has preloaded, ran Norton total clean. Don't know the last updated time to race day, I re-load of updates (right term?) who cleaned the logs.  Have the free version of Malwarebytes, run regularly, nothing comes.

  Fixed, had run as before, but didn't save Subinacl desktop instead of folder mentioned in fix

• I am trying to install KB2564958 on a Vista Home Premium, SP2, but it fails

  I am trying to install KB2564958 on a Vista Home Premium SP2.  This update fails and when it is installed as well as other updates, they ALL fail.

  What is an update that I should get, or can I just ignore it, if it's a need, how to install?
  
  The computer is 64-bit and 4 GB of RAM, AMD Quad-Core processor running
  Bobbie2836

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Method 1:

  I suggest you to follow the links and check out them.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I suggest to perform the clean boot and then try to install the updates and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• I brought an old Sidewinder Precision Pro joystick for use with old Microsoft Flight Sim 2000 Edition Pro, I can use the joystick with my Vista Home Premium laptop

  I installed Microsoft Flight Simulator 2000 Professional Edition, on my laptop. I bought an old Microsoft Sidewinder Precision Pro joystick. Can I use the joystick with my Vista Home Premium OS?.

  Hello

   
  What is the model of the sidewinder Precision Joystick?
   
  You can use it with Vista, but sometimes it can cause a problem. Check the link and if you have a problem follow the steps in the article.
  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer
  http://support.Microsoft.com/kb/294672

• Error 800b0100 KB2564958 Vista Home Premium SP2 32-bit.

  I am experiencing 800b0100 error when trying to install KB2564958 on Vista Home Premium SP2 32-bit.  I ran the system update tool and tried to download and manually install the KB2564958 without success.  Any ideas?

  A repair installation isn't a big problem if you have the right drive. A new clean install is a much larger task.

  Notwithstanding, there is no certainty that it will solve the problem but it is very unlikely to harmful effects on the system.

  The missing file is a strange situation. It is formally identified in the Article, but on a Vista computer that I have here, there is no sign of the file. The difference with your computer, is that my updates normally and your not.

  These links can help you find a solution:
  http://support.Microsoft.com/GP/wupd/en-GB

  https://support.Microsoft.com/OAS/default.aspx?&Gprid=6527&&St=1&wfxredirect=1&SD=GN

• I am trying to upgrade Windows Vista Home Premium. When I click on the UPGRADE button then it will display a window in Turkish. I need the window in English.

  Upgrade in an incorrect language window

  I am trying to upgrade Windows Vista Home Premium. When I click on the UPGRADE button then it will display a window in Turkish.  I need the window in English.  Can you please help?

  Thank you!!

  Hello

   
   
  1. You bought a Turkish version of upgrade CD?
  2. How you are trying to upgrade? (To CD using, every time that the update)
  3. What version you are trying to upgrade? Is - this Windows 7?

  Make sure you have the operating system to install a correct language.

  You can visit these links and check:

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/anytime-upgrade

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  Response so that we can better help you.

• I keep trying to reactivate win vista Home premium, but it not give me lower down to activate by phone.

  try to reactivate win vista Home premium

  it not give me lower down to activate by phone

  Returns with the product key already in use. It's because I reinstalled the operating system.

  Ms provide a number online, as it would be in many areas covered

  any help would be received with gratitude thank you

  Hello

  I suggest you to see link below and check if it helps.

  How to activate Windows Vista: http://support.microsoft.com/kb/940315

  Activating Windows: Frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Activating-Windows-frequently-asked-questions

  How to find a phone number for a Microsoft Product Activation Center: http://support.microsoft.com/kb/950929

  Hope this information is useful.

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Recovery without disks manually off during Windows Update (well after the finished download) - Vista Home Premium SP2

  Hello

  I have an Acer with Vista SP2. It has no boot and auto repair after that I stupidly shut the computer manually during a Windows Update.

  I fell asleep and woke up two hours after the start of the update of Windows. Then without thinking, I did a manual stop without recognizing the update restart message. Now Windows does not start, and the auto repair / recovery options have failed three times. Initially he gave me a (?) CMOS settings have changed the error so I went into Setup (with the delete key) and note the date / time has been reset to the date of manufacture of the computer, do not change that. I have however system virus detection function then it off after that repair failed the first time.

  I bought a second hand computer and I have no original discs and I can't find a manually created recovery disc I thought I made some time ago. The label of Windows with Windows Vista Home Premium product key is on the computer. I have access to a Windows 7 CD since another cmputer if this can help me.

  I sent thisquestion from another computer.

  Your help would be much appreciated.

  Hello

  an AV does not stop all

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

• How can I identify which version of Windows Server is running on my laptop which has Vista Home Premium SP2?

  Acer Aspire 5050 laptop
  Operating system: 32-bit Vista Home Premium Service Pack 2

  Hello

  Please specify that Vista Home Premium does not include Windows Server.

• How to: fix Windows Vista Home Premium SP2

  I don't have a CD or DVD containing the operating system I use now. I DO NOT WANT TO REINSTALL or RECOVER the operating system.  I would lose a lot of valuable information.

  I would be sincerely grateful to find a 'repair' for this operating system. Microsoft offers a service to REPAIR an existing installation of Vista Home Premium?

  Jeff

  Hello

  Microsoft does not include disks for OEM preinstalled computers, Acer, HP, brands etc.

  a repair install is performed from a vista operating system

  you will need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  and note the part about uninstalling Service Packs, if necessary

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  And if you need to do a startup repair and that you do not have a Vista DVD from Microsoft, read this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If you ever reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I can't disconnect or change user account after update vista Home premium SP2

  Acer e380 with vista home premium 32 bit OS 3 G of Ram
  After the SP2 update successful that I don't then log off user accounts or to switch between user accounts

  When I choose logout of the system never disconnects, and I have to hard start
  When I chose to change username the same thing happen it never disconnects and I have to hard start

  I can access my different user accounts when restarting individually well but is not a viable solution as long as switching user accounts and logout worked just find before the SP2 update

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall Norton Security Suite [or keep constant Protection Suite if you are a Subscriber Xfinity] and LiveUpdate and start any Norton Add ons via | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  6. OPTION A: do a clean install of Norton Security Suite [or keep constant Protection Suite]; Follow all the instructions.

  NOTE: Do not activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  OPTION (highly recommended) B: Install Microsoft Security Essentials (also free but MUCH more reliable & less annoying).

  -Online do NOT install applications as well !<>

  7. If you take OPTION A to #6, manually & repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.  Otherwise, skip this step.

  8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  9. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  10. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  10. b double-click the file that you saved in # 10 above & accept invites him to MERGE with the registry data.

  11 restart again.

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  13. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  13 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  c. 13, without taking into account of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  14 restart once more and then run a manual updates & install any/all the updates available (for example, KB2722913 or higher); Follow all the instructions.

  15. open Internet Explorer (only!) to http://java.com/en/download/installed.jsp & make sure that the test shows that Java Version 7 Update 7 [for Internet Explorer] is installed.

  16 get Adobe Flash Player v11.4.402.278 (or higher) installed NOW! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46252

  17. While you're at it, make sure that Adobe Reader or Acrobat v10.1.4 is installed (assuming that one is your default PDF reader)-online http://aumha.net/viewtopic.php?f=26&t=46241

  18. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• An upgrade on the spot with a Vista Home Premium SP1 won't work...

  My Vista Home Premium has some problems such as the audio service starts do not. Microsoft sent me a Vista DVD but it is SP1 and I installed SP2. It will work yet? I want to perform and the upgrade on the spot, but it does not give me the option to upgrade... just do a custom upgrade which is really just a new facility.

  Any help is greatly appreciated!

  Ryan Ryan Kaskel Internet Consulting http://www.ryankaskel.com/ http://consulting.ryankaskel.com/ RyanKaskel.com

  You will need to uninstall SP2.

  The SP installed cannot be higher than the SP on the DVD; Otherwise, the operating system installed is newer than what's on DVD, and upgrade is not available...

  http://support.Microsoft.com/default.aspx/KB/948537

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Above the tutorial shows you how to do a repair installation.

  See you soon. Mick Murphy - Microsoft partner

• Network drivers no longer will charge after upgrade to Vista Home Premium sp2.

  On a laptop Sony PCG - 7113 L VGN-NR220E, that is running Windows Vista Home Premium sp1, I tried to upgrade to sp2 who said he could not make the transfer and restarted, tried once more and then restored sp1.  All came back as the same with the exception of all the network drivers cannot be loaded.  Here is a list of drivers who have failed.

  • ISATAP. Westell.com
  • Map Microsoft ISATAP #3
  • Teredo Tunneling Pseudo-Interface
  • Marvell Yukon 88E8039 PCI-E Fast Ethernet
  • Controller of
  • LAN0Express AS IEEE 802.11 g PCI-E fit

  I went back to the site from Sony and all the latest drivers downloaded from the site and tried to install.  Only some allowed me to do even while administering it, but even those that didn't load on reboot even if it finds the drivers.

  I tried to uninstall the drivers in Device Manager, but nothing helped.  None of the drivers loaded when you restart.  I tried disabling verification of driver and reinstall the network drivers that I downloaded from Sony site without success.  Then I tried to download a driver directly from Marvell Yukon site for its pilot, but which also failed.

  Given that this approach did not work, I tried to get sp2 to load looking for why it was not installing.  I found a patch that was supposed to help the installation in certain situations that I loaded and sp2 installation I tried again a full download on another computer, which has not the same way.  I then tried to load sp1 over himself, but he refused, saying he was already loaded.

  I tried to start off backups old session, but without success.  I wouldn't have to reinstall the operating system everywhere, especially since I don't even know if the owner of the computer has a copy of the operating system.

  It seems to be that something related to all the fuction of network that worked before you attempt the installation of sp2 and was obvious immediately after.  Is there something I can do to restore the network features without a complete reinstallation of the operating system?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner