Problem with windows vista knowing that I have a wireless device.
Currently, I rebuilt an old laptop. I used a copy of windows, I confess, vista ultimate x 64. I installed this on the hard drive, then I partitioned to install a copy of Linux Mint13. Currently, I can load either the operating systems without problem. My problem is that on my Windows operating system, I have no network to connect to the internet in windows device is. I have a drive with windows on it, but I used to repair a unit. Now, when I use linux, which I do now, I can get online very well, because he knows that I got on the computer to use hardware wise. Why Windows Vista doesn't know I have wireless, etc. but Linux don't? Thank you in advance for any help.
Your computer must also be 64-bit, it may not work on 32-bit computers.
Try to download and install the latest driver wireless on the support site of the manufacturer of the computer specific to your computer model.
Tags: Windows
Similar Questions
-
original title: problems with Windows VISTA update
I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.
- 9 47 code
- Code 800070002
- Code D 80024200.
Is there a resolution to do the same thing?
Hello
Did you change your computer?
I suggest you to follow the methods and check.
Method 1:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareMethod 3:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation. So I tried a full install without success. Can you please give some tips to overcome this problem? I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD. Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.
I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:
You can download it from there and use your product key to upgrade:
http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only
You will need to reactivate by phone:
Activation of the phone:
1. press the Windows key + X , and then click run, and then type: slui.exe 4
2. then press the ENTER"" key.
3. Select your "country" in the list.
4. choose the option "activate phone".
5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
6. explain your problem clearly to the support person.
-
Activation problem with Windows Vista Home Premium 64-bit edition
Recently, I had a problem with my office that was running Windows Xp Pro. After having tried to reformat the computer with my installation disc, something was holding me back upwards. Thus, recently bought a laptop with Windows vista on it I used the disc that comes with it. Note: I ordered this laptop for Windows 7, vista is no longer running on this laptop. Everything installed very well on my office with the exception of one problem it won't let me activate windows. Now, it's my copy of windows vista that I paid for. It runs on a single computer in my office. I have validated my software on my desktop and it's been validated. Now why not activate Windows Vista?
If Vista is preinstalled on your laptop, it is classified as an OEM license and is not transferable.
The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
You cannot transfer it to another computer/laptopIf a license of Vista at retail, you can transfer it to another computer/laptop.
But it can only be installed on one computer at a time.A single license is a single Installation.
See you soon.
Mick Murphy - Microsoft partner
-
I use WIN XP as my main OS and I want to ugrade it for WIN VISTA Home Premium, but the ADVISOR WINDOWS VISTA is no longer available! How will I know if all my components are compatible with WINDOWS VISTA before I buy it?
Hello
You should check with the manufacturers of hardware and program
and use the Vista Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/
and read the vista system requirements
http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements
__________________________________________________________________
But Microsoft sells more than Vista.
They switched to Windows 7
If you are lucky, you could always find a copy of Vista to your local computer repair store
___________________________________________________________________
Why not see if your device is Compatible Windows 7
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
-
Windows Vista Plug ' n Play does not recognize printer HP 5600 series. HP Solutions Center's says no HP devices detected. Using USP connect since the printer 5 years ago. Reinstalling drivers does not help. Installation with disc says printer is not connected (USB) to the computer, who she really is. Have tried all USB ports on the computer to see if plug ' n play would work. Any help in doing so. How can I solve this problem?
Hello
Uninstall and reinstall your printer by using the drivers and information on the HP website.
Equip your model number of the printer for this information and troubleshooting for her.
http://WWW8.HP.com/us/en/support-drivers.html
Or ask in the Forums of HP's Support.
http://h30434.www3.HP.com/PSG/
See you soon.
-
I have problems with window vista boot as well as with the windows updates.
Windows vista does not restart. I have to go int recovery and channge the computer to an earlier point in time.
In addition, widows update will not work. Simply runs for hours and downooads nothing.
What can we do about it?
Hello
1. don't you make changes on the computer until the problem started?
2. do you receive error messages when you start?I suggest you perform a repair of the system using a Vista installation disc.
See these articles for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem -
Windows 7 is on a new Dell Inspiron desktop computer. Windows Vista is on a Dell Studio laptop I've had for a while. Hotmail also works very well on the new computer when I use IE9.
Upgrade your browser Firefox 8 and check
-
Touchpad problems with Windows Vista, HP Pavilion dv7
For some time now, I had problems using the touchpad on my HP Pavilion dv7-1260 mobile. When I press the left button of the mouse, I have the menu that is displayed when you press the right button of the mouse. I changed the settings on a million times and I reinstalled the drivers, but nothing seems to work. Maybe I need to change touchpad sensitivy or something, but I don't know how to do it on Windows Vista.
Hello
Looks like there is a problem with the hardware with the TouchPad so check with the help of HP, their online
documentation and drivers and ask questions in the forums about isseu known with this model.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/========
Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
and some come with a utility that loads in the Notification area next to the clock in the bottom right.==========================================
If necessary: (make sure that you have restarted at least once, if the above did not work)
Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
on the TouchPad and UNINSTALL.Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET
This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.
The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
http://support.Microsoft.com/kb/310575Then go to the system manufacturer's website and get the latest touchpad drivers.
Download - SAVE - go to where you put it-click on - RUN AS ADMIN.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I have windows vista and Trend Micro antivirus... I have a fake antivirus program which swept out of my system. We have fixed this, but I can't use Internet Explorer (but google chrome is ok) and when you click the start here button where there should be a list of my recent programs it is empty. Worse, it's also that I can't find anywhere system tools to do a disk cleanup or defragmentation. can someone help me with this. I need to clean my bad disk... they are full of temporary internet files. I tried looking everywhere and can not find it anywhere. Help, please
Hello
Let us know what fake virus you would help us help you.
The use of the methods in this Guide to uninstall should solve your problems. RKill and run FixNCF.reg
and check the other methods in the Guide and those below in this response.--------------------------------------------------------------------------------------------------------
Remove Win 7 Antispyware 2012 and Vista Antivirus 2012 changing name of thugs
(Uninstall guide)<-- read="" this="" link="" for="" removal="">-->
http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2012See if you can access the internet using the safe mode with networking (repeatedly press F8 as you start).
If you are unable to access the internet, then you will need download the programs on another computer
and transfer to it on removable media such as CD, DVD or USB drives.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
=========================================
If necessary once you are sure that the malware is removed completely:
You can try an in Place upgrade/repair Installation that allows to maintain the programs
and although redundant data backups are always a good idea.You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have Windows Vista Home Premium SP 2 with 32-bit. I have problems with the download of updates and with it closing. I want to know if I upgrade to Windows 7 If this will fix my problem. If so, where do I need to buy. Thank you
Hello
upgrading operating system does not always solve the problems.
You can take the problems with you
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or repost in the correct windows update forum
and include the kb numbers update and error codes
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
For more information windows 7
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
Windows 7 forums
http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2
Answers by topic
- Office & Customization
- Files, folders, & search
- Game
- Hardware drivers &
- Install, upgrade, and activate
- Internet Explorer
- Music & Sound
- Networking, mail, electronic, & updated online
- Maintenance & performance
- Photos & Video
- Programs
- Security, privacy, and user accounts
- System repair & recovery
- TV and movies on Windows
- Windows Update
-
Satellite A200-1d(a): various problems with Windows Vista Mail
Model: Satellite A200-1d(a)
O/s: Windows Vista editions Home Premium more
Background: Recommended for a parent, now transformed into 'support harassment ".The behavior of Windows Mail is displayed is non-standard and unreliable, for example:
Creating new folders local they are initially displayed in the list of folders (left sidebar), if the mail is restarted they disappear and reappear only if they are selected after clicking on "local folders". Other than the Inbox, local folders and the Microsoft? (used for notes, etc.), all the other default folders are missing, either sent, sent, drafts box, etc.
Another minor issue is that windows mail does not seem to recognize when the status of the internet connection changes from unavailable to available, in order to empty the Outbox and send emails, it is necessary to restart windows Messaging.
A number of occasions, all messages disappear from your Inbox and all other folders are not available, the only solution to this problem seems to be a reboot of the laptop.
This link seems to suggest that there is a problem with the security software which is now Norton Internet Security (configured and bundled with the laptop):
http://forums.techguy.org/all-other-software/551829-Windows-Mail-doesn ' t-display - messages.htmlI tried to disable email inbound/outbound scanning in Norton, but it made no difference.
Next step is to apply:http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm
and then remove Norton Internet security
Any ideas?
Other than the foregoing the laptop is fine, looks like a problem of s/w for me.concerning
Ball
Hello
I can't provide an exactly the solution to this problem of Vista Mail but to me, it looks like a Microsoft Vista operating system problem and not Toshiba Satellite.
I don t think there could be a problem with the hardware that's why we should look for solutions.Now you will ask where a software solution? In my opinion, you should check the knowledge base Microsoft for some useful tips.
http://support.Microsoft.com/search/
and the solution center in Windows Vista
http://support.Microsoft.com/windowsvistaBut first make sure that your Vista operating system is up-to-date and you have already installed all the updates and patches!
Good bye
-
Problems with Windows Vista Service pack 2: Code 8004402F; Code 80010108
Well, I tried to download the SP2 for Vista Edition home premium, about a month ago and got the 2nd error code indicated. I recently tried again and got the first code listed. During the recent attempt, the achievement of the updated 3/3 but computer froze just after the restart and had to do a system restore.
In addition, windows update cannot download updates... always says UNABLE
And, I can't run/install programs downloaded such as to fix the windows update. I get a message saying "THE TEMP FOLDER IS ON A DRIVE that IS FULL or IS INACCESSIBLE. FREE UP SPACE ON THE DRIVE OR THE VARIFY THAT YOU HAVE PERMISSION TO WRITE TO THE TEMP FOLDER '
I'm the administrator, I have more than enough free space on the disk, and I double checked that the permission is given to all temporary folders. Disk Cleanup is done frequently. SP1 is installed. I am running Trend Micro security and have tried with this option disabled.
Help, please!
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
problems with windows vista startup
2 days ago, that my computer was running an update. the computer has been accidentally disabled during the upgrade. the next day I got tired of the laptop start but I couldn't access it. When I turn on the laptop it says ""windows is not stopped successfully", then it gives me the opportunity to start in"safe mode","course with the command' or 'normal startup'.» When I click on one of these options, it takes me to the screen where I choose which user to log as long as. After I click on the user, I want to open a session on a black screen appears and it does not change. I see the cursor and I am able to move, but that's all I can do. in 'normal' mode, I try ctrl + alt + delete, but nothing happens (no window opens). in safe mode, I do ctrl + alt + delete and the window but when I click on restart, closed, logoff, or one of the options, nothing happens. I end up having to close the cpu by holding down the power button. I have no cd startup/recovery. I tried the F8 option but nothing happens. Please help me!
Hello
In Safe Mode does not allow to do something, try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
___________________________________
There are several methods to reinstall Vista.
This can help you (download files and make your own DVDs):
http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon
-
Problems with Windows Vista update error code I get is Code: 80096001
Hi gang,.
I need help I can get at this point. I am currently working on a machine to a customer who had the rootkit zero.access top. The machine works like a champ, now that it is all clean; but for some reason any Windows Vista refuses to update. Let me mention the operating system before proceeding. The operating system is Windows Vista Home Premium 64-bit. When I try to run Windows Update, the machine has a total of seven updates to install; This is especially important and option. In the important section, the machine is trying to install a security update and that is 9. In the optional section, the machine is trying to install the driver as updates: video, network, etc. The PC is already running Service Pack2. The error code I get is: 80096001. I tried every fix that Microsoft recommends, even the Microsoft Fix It tool. Nothing seems to work. I had a simular problem before in Windows XP. If my memory is good, I had to go to the entry in the registry of Windows Update and apply a DWORD here, or something; I don't remember exactly what I did. I can tell you that I checked the registry and there is literally no key to change in Windows Update. Any help or advice would be great, this question is about to drive me crazy.
Thank you
What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it is detected the last time that the system has been scanned with it?
You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.
(When was the last time you checked your system for malicious programs?)
Suggest you try to have the system scanned both of the following in this order - do not jump...
In addition to using an anti-virus, as Malware/spyware scan:
http://www.Malwarebytes.org/products/malwarebytes_free>
(MBAM) Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
In addition, scan with the free Version of (SAS)
http://SUPERAntiSpyware.com/superantispywarefreevspro.html >
How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>
ESET Online Scanner
http://www.eset.EU/ESET-online-scanner>
Access the article KB971058 via Internet Explorer (only)
If no malware is present - How to reset components Windows Updates?
http://support.Microsoft.com/kb/971058>
Download and Save the fix it 50202 from the page above.
Close all the open browsers and programs prior to execution of the fix it.
Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.
When he finished, check if download updates now.
If the updates are still not download after you run it, then run it again and choose his Aggressive mode.
Then reboot and see if the download updates now.
UTC/GMT is 19:30 on Friday, October 7, 2011
Maybe you are looking for
-
do not connect not lightning cable
All cable brightening, Apple or others, I use to connect to my iPhone 6, I have to move the insert head into the receptacle of the iPhone so he could load, usually push it again. He then releases and I push it again to connect to the load or on my M
-
I have an Apple Mac Pro I tried to dump my old emails and. Then tried to downupdates and he said couldn't do this because of my mail was stop this massage send out mail but unable to do so and can disconnect it please help an old lady with very littl
-
I have several questions on the computer.
Original title: slow and jerky, computer freezing I have a computer that is slow, jerky, freezing, the most, can, t get my streaming to work.
-
I had experiences of somebad with especially anti-virus software downloads. Many of these sites are unscroupolous download software on your PC that offers a free scan and tells you your computer is riddled with viruses and then if you click on repair
-
Not able to communicate between the VLANS on SG300-10
Please take a look at my crude drawing of how I want my network to work: SG300-10__________________________________________| 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.|_|___|__________________________________|| |_________________________________|______________