Problem with XNET start VI after the creation of sessions

I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

What I'm missing to get the interfaces online and ready before you send anything?

I was able to solve this problem because they did not actually XNET screw sorry for this post.

Tags: NI Products

Similar Questions

  • Having problems with Adobe Suite C. after the upgrade to El Capitan on an iMac?

    Someone at - it problems with Adobe Suite C. after the upgrade to El Capitan on aiMac? What did you do about this? What helped?

    In case you downloaded the Apple Stroe Yosemite, it always can be downloaded in the section of your account purchases.

  • Problems with WRT54GS and EasyLink after the addition of the Comcast Digital phone.

    I had a working network. Cable modem (Comcast), WRT54GS, 2 PCs per (an XP/SP3, a Vista Home Edition SP1), 2 cable PC laptop wireless (an XP/SP3, a Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as a network printer). Everything was going well and worked.

    Then, I added the Comcast Digital phone. Obviously, they went for a new modem cable modem cable with the phone service option. Now I can't print to the wired Vista PC OfficeJet and EasyLink displays "initializing" for too long I'll wait (5 minutes).

    Finally, I must kill EasyLink from the Task Manager. Any help or ideas appreciated!

    I solved the problem. It turns out the new modem cable and problem with EasyLink initialization were 'diversion '.

    The problem turns out to be a classic network problem! The Vista PC wired had a wrong IP address. The wireless PC XP has the printer configured with the name of network instead of the network address (IP, for example).

    When I deleted the printer on the Vista PC and added to the correct address everything worked fine.

    Apparently, the printer got a new IP address of the server on the WRT54GS after installing the new modem. In addition, it seems that Vista doesn't has not report an error of communication to a network printer, but for a direct USB connect.

  • Problems with EM Database Control after the application of 10.2.0.4 patches group

    Hi all

    Host: Linux x 86
    DB: One-time EM control the database. Originally 10.2.0.1 patched to 10.2.0.4

    Last night I upgraded database 10.2.0.1 to 10.2.0.4. Everything seemed to go well. I don't have any errors in the process, and when I logged in the database control, everything seemed fine. It was late at night, so I don't navigate around for very long, however. When I came this morning and did a few more extensive trials, after login I noticed first that, in the section general, version database has been listed as 10.2.0.1.0. I thought it was quite strange because I had just been connected to SQL * more and saw that the database was aware he was at version 10.2.0.4.0. I refreshed the page and saw

    "java.lang.Exception: IOException while reading the response: connection reset".

    top of the page. I have seen this problem before, and in the past, it has been resolved by restarting the dbconsole or ensuring that the analysis configuration is set up correctly. The first thing I did was question

    [Home] $ emctl stop dbconsole followed
    [Home] $ emctl start dbconsole

    to see if it would do the trick. When I saw that it didn't, I went in the Configuration of the analysis and that he was surprised to see that he said "no element not found." I refreshed the page and this error appeared:

    oracle.sysman.emSDK.emd.comm.CommException: IOException while reading the response: connection reset

    I tried to follow all the instructions in the Readme as closely as I could. I looked on the Internet and the Oracle Forums for most of the day trying to find the cause of this error. I see that people have these errors, but the circumstances are not the same as mine. Is this a common problem? Anyone know what I can do to solve it?

    Any help would be greatly appreciated.

    Thank you!
    John

    Try C.2 (Option 2. Recreate the DB control and repository Configuration files)

    HTH
    Srini

  • problems with other apps now after the upgrade only Illustrator to CC

    On a Mac. I try only to Illustrator CC. My other apps are CS6. Now when I go to open a PDF file for example - remember it's the CS6 Acrobat, I get the annoying CC sign in the window. He wants me to sign, but I'm not trying to use Acrobat CC. I try to use my Acrobat CS6.

    When you complete your trial period, uninstall cc and clean by use the creative cloud cleaning tool to solve installation problems.

    which can often solve the problem, but you may need to uninstall acrobat xi and then reinstall it when you have finished your cc trial period.

    I'm not aware of the app from cc conversion of older versions for cc versions except if you allow the application to your old versions of 'day '.  Thus, in the future, cannot update non - cc program.

  • Problems with playback of photos after the catalog import

    I just imported 400 pictures in a catalog from an another catalog on another computer and post a link to the source files (also copied from another computer), I get an error message (see screenshot). When I opened the photo to develop, I get the message that file access denied. Any ideas? Thank you

    I just imported 400 photos in a catalog to another catalog and I get an error messageScreenshot 2015-10-05 11.49.30.png

    Hi rugfoot,

    Indeed, by using the wireless network can most of the time can cause permissions problems.

    Concerning

    Rohit

  • Problem with opening Windows store after upgrade to 8.1 Windows

    Original title: cant access window 8 app store

    I had a 8.1 window update to my laptop.but 8 window whenever I try to open appstore, I gives me error that cannot cannot to the authentintion, due to errors, .i tried to open AppStore 3 g, wifi and broadband connection.but I still get the same error.

    Help, please.

    Hello

    Please contact Microsoft Community. I understand that you have a problem with opening Windows store after the upgrade to Windows 8.1. I appreciate your efforts to solve this problem. I've surely you will help solve this problem.

    To better understand the issue, I would need more information on your side.

    1. are you able to open other Apps of metro?
    2. What is the full error message?

    This problem might have occurred because of these reasons:

    1. Corrupt the App Store.
    2. Incorrect settings App.
    3. Corrupt system files.

    Try the steps listed here and see if it helps:

    Method 1:
    I suggest to try the procedure described in the article to reregister the App Store and check if that helps.

    http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

    Method 2:
    If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

    Use the System File Checker tool to repair missing or corrupted system files
    http://support.Microsoft.com/kb/929833/en-us

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

    I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

    Hello

    I think you are referring to the white empty window of CC desktop application.

    Please refer to the threads below where this issue has been addressed:

    Creative cloud is empty window why?

    Cloud Desktop App is empty?

    New application Cloud Creative unusable: it is empty!

    Re: Empty opening creative cloud app

    Kind regards

    Sheena

  • Satellite A210-199 does not start successfully after the BIOS update

    Hello

    I've got Sat A210-199.
    Yesterday I updated the BIOS, and after that problems occurred:

    While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
    I guess all this because the temperature of the CPU:

    When I do nothing it is 77 C. I don't think it's normal: (.)
    Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

    Why this temp is so high?
    There is no any process background or something.
    Is this normal?
    And what about this new BIOS?

    To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

    This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

    Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

    Good luck!

  • I have a problem with scrolling and typing on the computer.

    Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

    as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

    Hello

    Thanks for posting your question in the Microsoft community.

    I see that you have a hard time to work with the mouse.

    1. What is the brand and model of the mouse?
    2. The problem occurs on any program or when you perform a task in a particular program?

    Try these steps and see if that solves the problem of performance of your mouse.

    Method 1:

    You can check that the mouse buttons are set correct.

    Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

    Change the settings of the mouse

    http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

    Method 2:

    You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

    a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
    c. click on the Driver tab, and then click uninstall the driver.

    d. restart the computer and it will automatically re - install the drivers of.

    Note:

    You can also update mouse drivers by visiting the manufacturer's Web site.

    See this link for more information:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Let us know if you need help on this question or any question about Windows.

  • Major problem with first Pro CC (2015) the program randomly * gel * when you drag staple in the timeline.

    Hey there, having a very big problem important I need fixing with my first. I use the latest version of the creative cloud.

    My PC Specs are:

    Intel Core i7-4790 CPU @ 3.60 GHz

    16 GB of ram

    Running Windows 7 64 bit OS

    My question is which occur randomly during editing sessions. Everything will work perfectly, and then import a new video in the project bin (or image sequence or audio, what has happened several times)

    And I click on the video and drag it to the bottom in the timeline, the mouse pretty much freezes and wont let go of the clip. First is then suspended in a weird state of 'limbo '. I can still save the project and even export using shortcuts. But I can't click on anything whatsoever, or use any other action. The mouse is constantly in 'grabbing' mode. After the whole project is corrupted. I can solve the problem by opening a new project with a new sequence, then copy the clips... But it of very frustrating and massively takes time so please if anyone has a solution please let me know. Or whether it is actually just a big bug when creating last... This only started happening after the last update.

    I will attach some screenshots to continue my view of what is happening.

    Snap3.png

    Excuse Hypersnap logos, this is the only software screenshot that I could find which will appear at the mouse.

    Thanks for your help.

    Rich

    Hey Kevin,

    It seems fixed summer.

    Thank you

    Rich

  • vCAC 6.0 cannot connect after the creation of the tenant

    After the creation of a new tenant for use with vCAC 6.0, I disconnect from the default connection ([email protected]) and continue to go to the new URL and connection. When I do, my connection attempts fail. I followed the documentation and even used this blog entry as a reference to make sure I wasn't missing a step (vCloud Automation Center - vCAC 6.0 - addition of tenants - DailyHypervisor). After trying to connect with a users AD I created, I get the same error "username/password Incorrect name."

    Attached are the screenshots of the new tenant that I created.

    Screen Shot 2014-01-08 at 4.54.19 PM.png

    Screen Shot 2014-01-08 at 4.54.50 PM.png

    Screen Shot 2014-01-08 at 4.55.21 PM.png

    Screen Shot 2014-01-08 at 4.56.59 PM.png

    I didn't know all of the other signs on the site of the community with the people having this same problem, so I'm thinking I'm missing something important/simple. Any help you could provide would be greatly appreciated. Thank you.

    --

    Chris.

    You probably need to configure your domain Alias that your ad server is probably change the domain (if AD is configured to use an alias).

  • problem with my laptop asking for the administrator password or power on password

    I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

    Hello

    Try to enter: 40585508

    Kind regards

    DP - K

  • Problems with word and PDF after computer crash. Error "user has access privileges."

    Problems with word and PDF after crash

    My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example.  I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do?  Please help because I can't open some of my documents from the University.

    Hello world
    I would like to just say thank you for your help and the problem is now solved.  In the end I paid someone to sort it out.  He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost.  He told me that he had a program that looked for the old existing and re-installed.
    Thank you.

  • All files on my hard drive has become a shortcut, with kiieyex.exe added after the backslash in car

    original title: "kiieyex.exe" added to the files.

    Someone had this shortcut path added to the files? All files on my hard drive has become a shortcut, with kiieyex.exe added after the backslash in the car. When you click on it, I get this message: problem with shortcut shortcut, the called has been changed or moved and work more properly. You really want to remove this shortcut?  I'm not enough common sense to understand what happened, or what I need to do to access my files... Help!

    Hello

    Follow these steps:


    Step 1
    : download and run the tool of diagnosis from the link below.


    Difficulty of broken desktop shortcuts and common system maintenance tasks

    http://support.Microsoft.com/mats/system_maintenance_for_windows/  


    Step 2:
    run a scan for viruses on your computer.

    You can scan the computer using an anti-virus program. You can also analyze your computer online.

    Click here: http://www.microsoft.com/security/scanner/en-us/default.aspx

Maybe you are looking for

  • 4313 Broadcom drivers for Windows XP

    Hello I have a HP Mini 210-2002ed with windows xp on it yesterday, sience But none of the broadcom drivers are working, and my LAN port is broken, Could someone help me get this to work? Thank you very much! Best regards, Sander.

  • HP w2558hc 25.5 in. vivid color Full HD large screen flat panel monitor remote doesn't Do Anything

    I just receive the monitor and try the new.  Hit a couple of questions such as... I tried the remote control is connected to the monitor... the toddler into the slot... but it does not change the volume or something else. Is there anything else I nee

  • Resolution for prints on Pro - 100

    I take an online course to get certified Adobe for Photoshop. The instructor said that, for optimum print quality, it must use the maximum resolution that is available on your printer, on a Pro - 100 would be 2400 according to this guy. I have never

  • "" Windows Vista cannot connect to my network, error message "network not found path.

    I have a laptop Windows Vista, up until yesterday, I was able to connect and browse my network, now the computer shows just 3 computers, always in the same network, which connects in the same router, nothing has changed in the network environment, I

  • Display the PIX ver 6.3 (4) config

    Hi all All of a sudden I'm more able to display the configuration file running a PIX 515 v 6.3 (4) in the usual way. In the past, after issuing the command "show execution", the PIX will be stop and ask "- More -" press a key to continue. So either I