Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

Hola Buenas,

Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

MUCHAS Gracias

Buenas

Between 2 workstation are posible realize ese tipo configs of forma limpia.

El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

Para hacer eso as pides, deberias workstation pasar an esxi.

Saludos

Tags: VMware

Similar Questions

  • Windows Server 2012 Foundation and SMB problems with older equipment

    Hello

    My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

    This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

    But of course, the solution does work with my version of the server.

    Does anyone know if there is a similar fix available?  I got my hunting.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • Windows Server 2012 BEX problem

    Hello, I got Windows Server 2012 and VPS, I am connected by DRC, turned on my Tibia & Bot and 'close this window of DRC' after... 20 ~ minutes...

    Problem signature:
      Problem Event Name:   BEX
      Application Name: Tibia.exe
      Application Version:  10.9.3.0
      Application Timestamp:    5726e97b
      Fault Module Name:    Tibia.exe
      Fault Module Version: 10.9.3.0
      Fault Module Timestamp:   5726e97b
      Exception Offset: 00362276
      Exception Code:   c0000409
      Exception Data:   00000007
      OS Version:   6.3.9600.2.0.0.16.7
      Locale ID:    1033
      Additional Information 1: e6cc
      Additional Information 2: e6cc222ab84bf53679fea9a972cf2b2b
      Additional Information 3: 996a
      Additional Information 4: 996a8ba1334d6fb9f6300d6752909e6d
    
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=280262
    
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    

    Can U help me?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

    I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

    I want to connect the printer via USB only.

    I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

    But every time the same problem occurs.

    The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

    The debugging information:

    Installed the device.

    hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

    If I want to reinstall the driver again, I received the message:

    Setup error

    An entry in the Inf file is missing, the file may be Windows 95...

    Could you please help me, how to solve this problem?

    I need to activate the visual experience of Windows Server 2013, then the USB works

  • PowerVault NX400. It is possible to work with a Cluster SQL Server 2012?

    Hello, a customer asks me if the current NAS solution, they (DELL PowerVault NX400) will allow them to work as a shared Volume of participating in a Cluster of SQL Server Cluster using SQL Server 2012. If no what others don't bottom end (for small businesses) will be used for these purposes? Receive your answer. What about Diego VP

    DiegoVp

    Thks. DevMgr.

    In this sense, whereas the NX400 comes with Windows STORAGE Server 2012, which has an iSCSI Target Server (as a service) will allow only external 2 servers (active, active cluster) running Windows Server 2012 to use NAS as shared storage?   .

    Yes, if you use the iSCSI target option on your NX400, you could actually use your NX400 as a SAN and allow other 2 servers run a shared storage cluster.

    A few things to keep in mind:

    -When your NX400 must restart (for finishing or any other reason), you will need to first down both your servers in cluster

    -I recommend putting on 2 separate subnets and switches iSCSI traffic (or at least isolated VLAN on 2 separate physical switches). In other words; Avoid iSCSI traffic running on your local network for reasons of reliability and performance. I'd read some of the documentation of Equallogic iSCSI switch to see how you configure switches for iSCSI.

  • Problems installing OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2

    Hello Experts,

    We install OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2. He was installing (install the business - create a new BI system) smoothly, but in the last configuration Page progression at 27%, he was stuck. In accordance with the recommendation of oracle.

    It is a problem with WebLogic Server installation on Windows 2012 R2. That is documented in the unpublished bug 16844206 WLST IMPOSSIBLE GET ENV ON WINDOWS SERVER 12 WITH ENV MINIMAL

    MDG action plan-

    Install Java 1.7.

    Installation of WebLogic Server 10.3.6.

    Patch WebLogic Server with Patch 16844206 .

    Perform a software installation of OBIEE 11.1.1.9.0.

    Configure OBIEE


    Following the same thing we did it-

    (a) installed weblogic 10.3.6

    (b) Dowbloaded the patch and ran GUI and command line.


    1. When was held from the GUI

    Downloaded Patch_16844206. copied the content of this file zip, except the file Readme in your cache directory SmartUpdate (MW_HOME/utils/bsu/default cache_dir). Ran the bsu.cmd file located in the folder WM_HOME/Middleware/utils/bsu to open the Smart Update utility Oracle - and then 'downloaded Patches' table ffound Patch Id SRSV Bug 16844206 and then clicked on apply.

    However after doing a "running Validation" popup appears and he is blocked for 90 minutes at this same position. (see screenshot)

    http://www.use.com/FonC8

    2. When ran from command line-


    D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3-patch_download_dir = D:\app\Oracle\Middleware\utils\bsu\cache_dir-statut = downloaded - discovers - verbose

    Exception in thread "Main Thread" means

    D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3 - patchlist = 23698-verbose - install

    Exception in thread "Main Thread" means


    Any solution?


    Thank you very much

    Benoit

    Hi all

    According to Oracle advises has resolved it as follows.

    It is a failure with OutOfMemory. Increase the memory allocated for the process of the bsu. Change the following line in bsu.cmd

    MEM_ARGS =-Xms256m-Xmx512m set

    TO

    Set MEM_ARGS =-Xms1024m-Xmx1024m

    Basically, you will need to open bsu.cmd in Notepad, and then change the setting above. And then again run. And it will work.

    Thank you very much

    Benoit

  • Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments

    Hi all!

    I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
    http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspx

    But I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
    Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
    KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
    KdInitStatus value is "c00000b5".

    I tried:
    -change of hardware to 9 version
    -change the comments to e1000 Ethernet card
    -disable the DHCP (debugger comments must use APIPA)
    -change the type of connection (bridge NAT, host-only)

    and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
    But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.

    Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?

    Thank you!

    Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.

  • Cf11 install problem on WIndows server 2012 R2

    We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

    Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

    The problem is that any call to a model cfm results an error (html pages serve very well):

    Error HTTP 500.0 - internal server error

    The page cannot be displayed because an internal server error has occurred.

    Detailed error information:

    Module IsapiModule

    Notification ExecuteRequestHandler

    Manager cfmHandler

    Error 0x8007007f

    URL requested http://localhost: 80 / default.cfm

    Physical path C:\inetpub\wwwroot\default.cfm

    Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

    Solved the problem... it is not a problem of one CF but and especially an IIS problem...

    (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

    (2) restart

    (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

    (4) restart IIS and CF

    (5) Web Server Config set to 'all '.

    60 restart IIS and CF

    The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.

  • Problem of DNS in Windows server 2012

    Hi guys,.

    I'm a newbie here and I hope to get help with my question.

    I have a server DNS (192.168.1.55/24). Everything is already configured, the IP address and host names are already mapped and is already working. Now the problem is... I example. Metro.com, when I'm in the same segment (192.168.1.x 24) I am able to access example.metro.com using only his "example" hostame in run. (windows + R, then \\example). When I ping, he also responds with the correct address w/c IP is 192.168.1.11 being. Now, I have another VLAN in my network is 10.1.1.0/24 and 10.1.2.0/24, these VLANS are able to see the 192.168.1.0/24 because I have a cisco layer 3 switch. When I use the DNS 192.168.1.55 segment both 10.1.1.x and 10.1.2.x, so I am able to still ping example.metro.com and able to access. But what happens is, I'm not able to access using only the host name-example term. Is there something I need to configure on the DNS server to have it working? I might have exhausted all procedures, but still can't make it work, and I'd really appreciate that someone can give me a help and advice.

    Once again...

    1. I'm on the 10.1.1.0/24 network

    2. I use 192.168.1.55 as DNS (which I am able to ping, btw)

    3. it can translate example.metro.com to 192.168.1.11 when I ping.

    4. IM NOT in MEASUREMENT of ACCESS IT USING ONLY \\EXAMPLE term I can when I'm in the same segment as the server DNS 192.168.1.0/24.

    Thank you!!

    -BJL

    Try asking in the Windows Server forum:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server

    Hello!

    We have a server windows 2012 R2 with MSSQL server 2014.

    The client software uses the jdbc for database connection. If customers make a query which collects a massive amount of data the whole thing slowed down after a while.

    Then, his need to wait 10-20 minutes to speed up again. I have tested and tried everything.

    -measure the ethernet parameters

    -replace the cables by cat7

    -installed a virtual machine with the windows client and the real customer use the virtual environment via rdp

    -activated the RSS in the vmxnet3 advanced settings and windows

    -the mode SplitRx in vcenter vm settings and disabled ethernet Coalescent too

    -set the VM to high latency

    -tried to migrate the virtual machine to another host

    Not for their help. If a massive sql query is run first its great, then the need for a second or more to check a single record.

    checked the vm cpu stress but its less than 5% all the time. Checked the network with wireshark, there are a lot of small packets but nothing big. The bandwidth used is still low.

    When its idle delay after two packets will increase from a few ms to 400-500 ms.

    Our most powerful server is an HP DL380 G9 with two octa core Xeon processor 384 GB of ram, full SSD datastore. Its a lightning fast host.

    The virtual machine have 8 core cpu and 64 GB of ram.

    No matter where am I up the virtual machine or how many resources provide the custom aisle question.

    The strange thing is when customers slowed down I can copy large files between the client and the server with fast speed, so the slow sql.

    I can solved this question if I use the ethernet E1000 instead of the VMXNET3 adapter, but E1000 have much more load and the server need to transfer big files too, not only the sql service.

    Vmxnet3 much faster and have less overhead, but this question of sql, I have a problem with that. So I go back to the E1000 for now. Its slower eat more cpu but the sql connections works very well without any problems.

    Can someone tell me what I can try harder to identify the vmxnet3 problem? I really need it to improve network performance and lower overhead, but the rapid sql is the top priority.

    Thank you!!!

    We had exactly the same problem on our SQL servers once upgraded to Vsphere6.This is due to Receive Segment coalescence feature in new VMXNET3-nics on Win 2012.

    More details here: http://nickmarshall.com.au/blog/2015/7/24/vsphere-6-hardware-version-11

    The best way to solve this problem is to turn it off completely in the server operating system (in the admin command prompt):

    netsh int tcp set global rsc = disabled


    Check with:


    netsh int tcp show global

    It's fast and easy without downtime or disruptions and involves no change types of nic.

    After doing this on all our SQL and application servers, everything was ok.



  • Cannot add the new printer port for Central Output Server 5.7 under Windows Server 2012

    I am my output of an old Windows box to a new server migration and have problems with the new ports.  I have 6 installed instances and the last looks OK, but all the others get errors when all output is sent to them, even a Windows Test print. I have them all the same thing, with the format \\.\pipe\jetform\server5 configuration port

    When I installed the software, I installed all 6 instances then went through and added 6 local printer ports - it seemed to configure them OK this first time.

    My test was then on the 6th and last instance and went well.

    When I wanted to test the other forums, I found all simply erroneous jobs on the queue for the printer.

    If I have one of these printers connected to the 6th port, it worked fine.

    I deleted one of the ports that did not work and I tried to re-add. Then I got the message "the system cannot find the file specified."

    I tried to add the port via the registry - he added, but would not yet print.

    Then I noticed in the output server control center, when I tried to stop Central and start one of them, I got the error "unable to connect to the channel named"\\.\pipe\jetform\server5.ctr"

    I use a domain account that is configured to run Adobe services, he is a Director of field with all required fees

    I modified the local security policy to enable users to add printer drivers.

    And I have now run out of ideas! Someone at - it a?

    Thank you

    This was traced to one of still having ini files a record of the proceedings of last name installed (i.e. SERVER6).

    So it's fixed

  • Had a problem with the print spooler in Windows server 2012 R2 so cannot print

    service has stopped several times to meet the demands of service control: print spooler

    Contact the service provider or system administrator on whether to disable this service until the problem is identified. You may have to restart the computer in safe mode you can turn off the service.

    Event ID - 7046

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • I have problems of DNS suffix with my box of Windows Server 2003 and Windows XP.

    original title: issues of DNS suffix

    I have some errors of suffix DNX, I am running 2003 server and XP SP3 on my desktop PC. My DNS suffix repeats my domain for example name twice by aj.urs.com

    AJ. URS.com

    URS.com

    It's not that prevents me from exercising the normal functions on machines but can't figure out how to fix. FYI, in my opinion, using Mcafee EPO because of problems, suggestions?

    Hi Karen,.

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

    http://social.technet.Microsoft.com/forums/en-us/categories/

    I hope this helps.

  • Problem with control of bug 0xC5: DRIVER_CORRUPTED_EXPOOL on the virtual machine (Windows Server 2012 R2) - TDI vShield Manager error on vnetflt.sys

    Hello guys, I'm having this problem:

    KB.VMware.com/selfservice/microsites/Search.do?Language=en_US & cmd = displayKC & externalId = 2081616

    The thing is that my ESXi hosts run 5.1 Patch Update 3 7 and this says KB updated to 5.1 Patch Update 2 6.

    No idea what to do?

    Thank you

    I just reinstalled the VMware tools without the vnetflt.sys driver and the problem resolved.

  • Problem with the search service on a Windows Server 2012 R2

    Hi all

    I'm having problems setting up my newly installed Server vCenter server.

    Everything seems to be installed properly, at least I got no error message and I am able to connect to the Web Client vSphere.

    However, I can't create a data center as the inventory does not display any server...

    Weird, isn't it?

    When I try to access to the https://localhost:7444 / lookupservice page, a message tells me that the service is not available.

    Is there something else to do here?

    Something else weird to me, a beginner in VMWare environments, is that although I'm loging as administrator, it seems that I have not at all privilege. For example, for roles see, access to licenses and so on.

    How I setting a user administrator 'real '?

    Do you think that my problem might be this question of privilege? And that I do not see any server in the inventory because my administrator user does not have the appropriate rights to view it?



    Thanks in advance for any help you can provide.


    Kind regards


    Jeremy

    OK Guyz... My bad.

    Actually, I connect with the user local administrator instead of the user [email protected].

    Now everything seems fine.

    Sorry for the inconvenience! ;-)

    Jeremy

Maybe you are looking for

  • 3D in iOS 10 cards gone?

    The 3D satellite view feature are removed in the latest version of Apple's maps? I'm not finding an option for him.  I liked this feature which is the equivalent of google street view.

  • White screen but still can open the e-mail and work with.

    Where e-mail is supposed to appear to the right, that it is not. Email is there and I can see on the lower right screen and I can open it and use it but cannot display in the blink of an eye. And, making it very difficult to work with.

  • Skype is missing from the ringer option

    Hi, I'm trying to understand what the problem with my Skype. The week last Skype has stopped playing sounds when I received incoming calls. All other sounds work always. The call can always be connected. All right, but it's a huge problem for me beca

  • How do you take into account a differential signal with daqmx?

    I created a channel using 2 separate power sources. However, these sources of tension are two differentials through other channels on the DAQ card. Is there a way to put my physical as something like channels ' premium w / channel xxx "?

  • Windows update error code: _80070490

    The correction of Microsoft, connecting cd organizers can't update work because the option is not available when I run the disc. It actually says that option is not available.