problemi su periferica vm windows server 2012 usb

Similar Questions

• Problem of DNS in Windows server 2012

  Hi guys,.

  I'm a newbie here and I hope to get help with my question.

  I have a server DNS (192.168.1.55/24). Everything is already configured, the IP address and host names are already mapped and is already working. Now the problem is... I example. Metro.com, when I'm in the same segment (192.168.1.x 24) I am able to access example.metro.com using only his "example" hostame in run. (windows + R, then \\example). When I ping, he also responds with the correct address w/c IP is 192.168.1.11 being. Now, I have another VLAN in my network is 10.1.1.0/24 and 10.1.2.0/24, these VLANS are able to see the 192.168.1.0/24 because I have a cisco layer 3 switch. When I use the DNS 192.168.1.55 segment both 10.1.1.x and 10.1.2.x, so I am able to still ping example.metro.com and able to access. But what happens is, I'm not able to access using only the host name-example term. Is there something I need to configure on the DNS server to have it working? I might have exhausted all procedures, but still can't make it work, and I'd really appreciate that someone can give me a help and advice.

  Once again...

  1. I'm on the 10.1.1.0/24 network

  2. I use 192.168.1.55 as DNS (which I am able to ping, btw)

  3. it can translate example.metro.com to 192.168.1.11 when I ping.

  4. IM NOT in MEASUREMENT of ACCESS IT USING ONLY \\EXAMPLE term I can when I'm in the same segment as the server DNS 192.168.1.0/24.

  Thank you!!

  -BJL

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows Server 2012 BEX problem

  Hello, I got Windows Server 2012 and VPS, I am connected by DRC, turned on my Tibia & Bot and 'close this window of DRC' after... 20 ~ minutes...

  Problem signature:
    Problem Event Name:   BEX
    Application Name: Tibia.exe
    Application Version:  10.9.3.0
    Application Timestamp:    5726e97b
    Fault Module Name:    Tibia.exe
    Fault Module Version: 10.9.3.0
    Fault Module Timestamp:   5726e97b
    Exception Offset: 00362276
    Exception Code:   c0000409
    Exception Data:   00000007
    OS Version:   6.3.9600.2.0.0.16.7
    Locale ID:    1033
    Additional Information 1: e6cc
    Additional Information 2: e6cc222ab84bf53679fea9a972cf2b2b
    Additional Information 3: 996a
    Additional Information 4: 996a8ba1334d6fb9f6300d6752909e6d
  
  Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=280262
  
  If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
  

  Can U help me?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Then Windows Server 2012 or any version of Windows Server can detect whether a USB WindowsToGo is used?

  Hi, I am a newly assigned system admin and don't make broad not yet know about it as I met recently. I managed a small business is composed of 15 to 20 computers. The previous system already admin configured everything ADC Policy GPO. An employee was able to install a software game on a computer she used when I checked, she was using the WindowsToGo USB. I am a little confused because it never trigger alarms on the ADC server, assuming a different computer on the WindowsToGo name. Is there a way to monitor this or any third party software that could determine if any WindowsToGo USB or a USB bootable is used?

  Sorry, bad forums.

  TechNet forums - Windows Server 2012 General - Microsoft

  Post here.

• Problems installing OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2

  Hello Experts,

  We install OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2. He was installing (install the business - create a new BI system) smoothly, but in the last configuration Page progression at 27%, he was stuck. In accordance with the recommendation of oracle.

  It is a problem with WebLogic Server installation on Windows 2012 R2. That is documented in the unpublished bug 16844206 WLST IMPOSSIBLE GET ENV ON WINDOWS SERVER 12 WITH ENV MINIMAL

  MDG action plan-
  

  Install Java 1.7.

  Installation of WebLogic Server 10.3.6.

  Patch WebLogic Server with Patch 16844206 .

  Perform a software installation of OBIEE 11.1.1.9.0.

  Configure OBIEE

  
  

  Following the same thing we did it-

  (a) installed weblogic 10.3.6

  (b) Dowbloaded the patch and ran GUI and command line.

  
  

  1. When was held from the GUI

  Downloaded Patch_16844206. copied the content of this file zip, except the file Readme in your cache directory SmartUpdate (MW_HOME/utils/bsu/default cache_dir). Ran the bsu.cmd file located in the folder WM_HOME/Middleware/utils/bsu to open the Smart Update utility Oracle - and then 'downloaded Patches' table ffound Patch Id SRSV Bug 16844206 and then clicked on apply.

  However after doing a "running Validation" popup appears and he is blocked for 90 minutes at this same position. (see screenshot)

  http://www.use.com/FonC8

  2. When ran from command line-

  
  

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3-patch_download_dir = D:\app\Oracle\Middleware\utils\bsu\cache_dir-statut = downloaded - discovers - verbose

  Exception in thread "Main Thread" means

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3 - patchlist = 23698-verbose - install

  Exception in thread "Main Thread" means

  
  

  Any solution?

  
  

  Thank you very much

  Benoit
  

  Hi all

  According to Oracle advises has resolved it as follows.

  It is a failure with OutOfMemory. Increase the memory allocated for the process of the bsu. Change the following line in bsu.cmd

  MEM_ARGS =-Xms256m-Xmx512m set

  TO

  Set MEM_ARGS =-Xms1024m-Xmx1024m

  Basically, you will need to open bsu.cmd in Notepad, and then change the setting above. And then again run. And it will work.

  Thank you very much

  Benoit

• Redirect USB in Windows server 2012

  I was wondering if redirect USB in Windows Server 2012 could take charge of the concurrent users.

  I mean, for instance, two users A and B are connected to the same remote server from WS 2012 and the user has plugged a USB stick into his computer ThinClient and forwarding, is it possible that the user that was able to find this USB and do some operations with this USB?

  Please offer me some hints BTW.

  Thank you.

  Yes, that's correct. storage devices are not visible between sessions.

• Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments

  Hi all!

  I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspx

  But I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
  Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
  KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
  KdInitStatus value is "c00000b5".

  I tried:
  -change of hardware to 9 version
  -change the comments to e1000 Ethernet card
  -disable the DHCP (debugger comments must use APIPA)
  -change the type of connection (bridge NAT, host-only)

  and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
  But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.

  Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?

  Thank you!

  Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.

• Installation of Windows Server 2012 problem

  I tried with different configurations, install Windows Server 2012 as operating system prompted but still got the error attached.
  Someone knows why?

  Hello and welcome to the communities.

  What version of VMware Player are you using?

• Error activation product key has been used already on Windows Server 2012.

  Original title: Activation error

  Two days ago, I installed windows server 2012 on my PC... It has been corrupted because of virus on my USB key that I reinstalled it twice but both times, it has been corrupted... when I installed it third time Activation has failed, it is said that this product code was used on another pc... no activation now please help me... and one thing I've never done any material change

  Try the phone activation, you may have to do during the week:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.