Problems adding our HP Media Extender for Windows Media Center

Similar Questions

• When you access Intranet sites that use SSL certificates issued by our internal PKI, FF for Windows gives an error of "incorrectly put in the form of message coded DER"

  When to access Intranet sites who have the SSL certificates issued by our internal PKI, FF for Windows gives an error message - an error occurred when connecting to myshaw. Security Library: improperly formatted DER encoded message. (Error code: sec_error_bad_der)

  Chrome and IE work fine. This is a PKI again using the signature SHA-2 algorithm.

  I was able to identify the problem. Our public key infrastructure has been using some signature algorithms that FF did not support.

• Problem installing disktop 800 wireless drivers for windows xp

  Problem installing disktop 800 wireless drivers for windows xp

  Hi Samir,

  I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the error you get when trying to install the driver?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• Transfer the Software Photoshop CS6 extended for Windows Edition student from a Windows PC to a Mac

  I bought Photoshop CS6 extended for Windows Edition for my PC online student year last of Curry of PC World. I was told, at the time of purchase, that I would be able to transfer this software from my PC to a Macbook. I've now bought the Macbook and would like to transfer the software on my old Windows PC on my new Macbook. Please could I have assistance for that purpose. thank you!

  You don't mention who told you you can transfer the software, but I suspect it wasn't someone from Adobe.  Versions are platform-specific, so there is little chance of the installation of the version of Windows on a Mac without the use of a Windows emulator any.  Since it is CS6, you have the possibility to request an exchange of platform.  See the following...

  Product change or the language platform
  -----------------------------------

  You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

• Is there a possibility that MusicBrainz can be added as a data provider for Windows Media Player

  When you use Windows Media Player, I was hurt a lot to identify my music. A lot of music I have is not available in the Microsoft music meta service database. What gives? Would be nice if Microsoft could be added to their database. MusicBrainz is a big data provider for Windows Media Player and would make it easier for information about the available media. Data MusicBrainz are permitted in the public domain and some under Creative Commons (CC) license. I don't think that Rovi has a contract saying to Microsoft data to use. I can cite other data in addition to the AMG providers: Journal of CD Japan, CD newspaper China, ZACR DBS and feedback from users. I can almost guarantee you if Microsoft used the MusicBrainz data, Windows Media Player would be much easier for the Organization of the music. Data MusicBrainz are much better quality than WMP user feedback data.

  Hi chuckwoodakawoodchuck,

   
  Welcome to the Microsoft community. Thanks for your suggestion, I will ask you post this feedback in the following link as well.
   
  Give us your comments for Windows 7.
  http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1
   
  Please let us know if you find any problem with Windows, we will be happy to help you.

• Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

  I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
  When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
  When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
  With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
  http://support.Microsoft.com/kb/910905
  However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
  I took a copy of the mcelog and have attached a copy of the log below.

  Assistance or management, you can provide me to solve this problem would be highly appreciated.

  At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1046.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package

  Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1047.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Creation process: KB900325.exe/quiet /norestart
  0x00000bc2 returned by process

  Function (ExecCmdInThread) Message of Post for the Package id: 1048.

  "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1044.

  A generic Package: 05/12/11. 21:26:14
  Looking for an existing installation of the generic package

  A generic Package: 05/12/11. 21:26:53
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 06/03/12. 21:27:50
  Looking for an existing installation of the generic package

  A generic Package: 06/03/12. 21:28:23
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 09:44:39
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 09:45:16
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 10:11:58
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 10:12:30
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  Hi kwanray,

  Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Update Rollup 2 for Windows XP Media Center Edition 2005

  Reference: Support for Windows XP Media Center Edition 2005

  Let us know if you need help with Windows related issues. We will be happy to help you.

• UPnP search fails when adding Xbox 360 Media Center Extender

  First of all, I spent a week looking for a solution to this so if I missed something obvious, I apologize.

  My xbox has been connected as a media center extender to this combination of the computer and the router for several months now. The router is a WII-HP-G300NH Buffalo. Earlier this week the media center extender was having video playback problems. After restarting the computer, the Extender was is no longer connected.

  When I try to add a new extension unit I get the message "unable to add extender. Microsoft says to activate upnp and multicast. Check. Reflashed firmware dd - wrt. No luck. Back to buffalo firmware. No luck. Try an old Linksys WRT54GL I hang out. No luck.

  The event recorder has this error: "Media Center Extender Setup has failed as the Extender has been detected on the network unsuccessfully searching for UPnP for the Extender (timed out after 20000ms)." Event ID: 538

  Now, I did everything I could find on the activation of network discovery, anything allowing to access media and these. Network and sharing Center is located about large open. I also tried switching between home and work networks.

  That said, I decided to check and see what updates have been installed. It turns out that an update has been applied on the day, that I started to have problems. It is said that it can not be uninstalled. Description Windows 7 and Windows Server 2008 R2 installation software item updated

  Note: I have no system restore points. Small SSD and has not taken the time to understand how to save elsewhere.

  That's all the information I have. I convinced myself that it is not the router via the steps described above and that it is something to do with the computer. Help?

  FIXED.

  Reinstalled NIC drivers.

• Problems to install the latest updates for windows vista.

  I ran several times automated convenience store. It corrects all but one of the problems found. It is said: problems installing updates, not been resolved in the report.

  I tried to restart the computer, but that did not help either.

  When I run windows update acts as he checks the updates, but does no progress. It is used to take a long time (2 1/2 hours or more) to find the updates. Now just, it works and does not stop.

  I did a manual reset of the update program earlier and it worked, but after the restart to install the updates, the computer would not start up.  I reformatted the computer by reinstalling the software and updates of everything. After obtaining service pack 2, Vista it starts having problems again.

  I'm just trying to get the secure computer til our new we get in about 2 weeks.

  I looked at other messages, but they are not quite the same thing. Most are for Windows 7, so I wonder about their usefulness.

  I don't get the error at this time codes.

  Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote my post:

  1. when (date about) have you buy the computer?

  1B. is this a Vista 32-bit or a 64-bit computer?  See http://support.microsoft.com/kb/827218

  c. 1, which manufactured the computer (for example, Dell;) HP; Lenovo; Toshiba)?

  1 d. The computer come with Vista, Vista SP1 or SP2 from Vista preinstalled?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer as you bought?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  5a. is Internet Explorer 7 (IE7), IE8 or IE9 installed?

  5 b. assuming that IE9 => what Version & KB number update are displayed in the second line of text using IE9. [Alt + H + A] tab. for example, Updated Version: 9.0.54 (KB9876543) ?

  • Starting January 12, 2016, IE9 is the only version of support in the future. If IE8 or IE7 is still installed, the computer will not be available in new updates.

  6 assuming that Java is installed => is 91 update Java Version 8 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://java.com/en/download/uninstallapplet.jsp [2]

  • Java Update: the Patch or pitch it
    http://krebsonsecurity.com/2014/07/Java-Update-patch-it-or-pitch-it/
  • It's time to disable/uninstall Java?
    http://securitygarden.blogspot.com/2013/01/Java-zero-day-again-time-to.html

  7 is Adobe Flash Player v21.0.0.213 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

  8. is Firefox version 46 (or higher) or Google Chrome version 50.0.2661.94 (or higher) or another alternative browser installed?

  9. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Comprehensive care system; Glary Utilities; Registry Booster; McAfee QuickClean; Own fast AVG; AVG PC TuneUp; Norton Registry Cleaner; Norton PC tune-up; PCTools optimizer; SpeedUpMyPC; FixMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry Cleaner CCleaner component)?

  ==================================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] no need to install Java if it isn't already installed.

• Historic Windows Update displays do not correctly after installing problem updates 7.6.7600.256 for Windows Update Agent?

  Had the problem on the 25/06 reboot after the installation of update 7.6.7600.256 for Windows Update Agent (required system restore).

  This (with duplicates) and subsequent updates are shown as successful in the history of the update, but shows always date of "updates have been installed" on the home window Windows Update like 13/06/2012 (previous updates) and updates later only the fix (KB981889) shows as available in the Uninstall list.

  How will I know if the Windows Agent Update and other subsequent updates installed correctly?

  If the Update Agent update has not been installed correctly, is there a solution for this?

  Hello

  You did changes to the computer before the show?

  You can check the link and update verification are installed.
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  
  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  You can try the steps in the link and check.

  Windows Update or Microsoft Update repeatedly offers the same update http://support.Microsoft.com/kb/910339 Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows: http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!

• Problem installing NOR-488. 2 for windows 7

  Facing some installation issues that need your support.

  Tried to install NOR-488. 2 for windows 7 and there is a window

  pop up. See attachment.

  CAN advice there at - it a patch of window to fix this?

  Thank you

  Mike.T

  Managed to solve the problem.

  I have uninstall all programs of NOR (Please make sure that all traces of programs OR is deleted).

  Website below can help guide by removing all programs of NOR.

  http://digital.NI.com/public.nsf/allkb/B4BF3B96988453B98625728100009670

  Then I proceed to the installation of the last worm NOR-488. 2 3.1, followed by the installation of the hardware (card GPIB).

  Finally the Labview 7.1.

  Now test to see if my old labview software and hardware can operate smoothly in windows 7...

  Thanks for the support!

• T410 text selection problem w / Intel HD Graphics Driver for Windows 7 (32 bit)

  After I've upgraded to the latest Intel HD Graphics driver for Windows 7 (32 bit) and Vista (32-bit) - ThinkPad T410, T410i T410s, T410si, T510, T510i, X 201 X201i, X201s, and X 201 Tablet

  Version: 8.15.10.2025

  Release date: 29/01/2010

  Who is here.

  I came across weird questions, highlighting the text. Essentially, my text highlights but may be of different colours (some too light to see). After getting this weird highlight, I can minimize, maximize, or move my window off the coast and back on the screen and the highlight will be one color.

  This problem goes away if I return to the 8.15.10.2008 version.

  Example 1: question	Example 1: Problem after restore/maximize window

  Example 2: question	Example 2: Problem after restore/maximize window

  
  

• I'm having a problem with the installation of update for Windows Vista (KB973768) security, error code 80073715's anyoe can help me?

  After getting my laptop to factory State, I ran the update of the window and got stuck to the update of security for Windows Vista (KB973768). The error code is 80073715. The update does not always settle anything I tried (reboot, download directly from the website of window, run the diagnostic window and solve problems). If anyone can help me, I really appreciate it.

  ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT 80073715

  The identity of the manifests are identical, but their content is different

  In a Word, there is a problem with component maintenance (EC).

  The information stored on the content of the file does not match what is present in Windows\winsxs.

  Try another attempt to update. If/when it breaks down, thanks for posting the * last * 50 or if WindowsUpdate.log lines in your answer:

  How to read the Windowsupdate.log file

  http://support.Microsoft.com/kb/902093

  In addition, please include the edition of Windows and the Service Pack level of operating system-

  For Vista \Win7, * right * click the computer on the desktop or the Start Menu, and then select Properties. The information is under "Windows edition".

  04/09 / 1107:46: 58 pm

• Problem with unistal service pack 2 for Windows Vista

  Well, I have a problem with service pack 2, I installed a service pack 2 for 64-bit system. Later, I check my computer and found my system is 32 bit, now I want to uninstall this service pack and install service pack 2 for 32 but I can't do that, because in the final phase, Windows told me, service pack could not be uninstalled.

  What can I do to fix this?

  Transfer your question in the Windows Update Forum, or contact Microsoft SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner