Problems after 2nd installation of XP on my Satellite L40

Similar Questions

• My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  It's almost certainly a driver problem.

  Please tell the service pack on your Windows® XP Pro level forum and the manufacturer and model of your system, if it is conditioned, or the make and model of your motherboard if it is not.  In addition, please tell us the manufacturer and model of the optical drive.

  First of all, if there is a system, go to the support Web site of the manufacturer for your system model.  If this is not a system, go to the support Web site of the manufacturer of the motherboard for your model of motherboard.  In the first case, you should find the drivers, chipset in particular drivers, updates and software for your system. Install all the that apply.  In the second case, you will find the drivers of integrated devices, chipset, updates and software for your motherboard drivers. Yet once, install all the that apply.  As we know nothing on the optical drive other it is attached via SATA, I can't talk about what to do there except that you should go to the manufacturer's support Web site and search for drivers and updated firmware for your model.

  It would have been helpful if you had provided more complete information on the installation of Windows, your system hardware and the optical drive.  The most complete information; more answers you will get.  Please, read:KB555375 - how to ask a question.

  Don't forget, no member of this forum is omniscient.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• Satellite P855-31V: some problems after the installation of Win 8.1 and drivers

  After that installation of 8.1 of Windows and updated drivers have problems:

  1. the switch market/no work
  2. flight mode button not work
  3. ECO button not work
  4. applications not available menu home

  Notebook * toshiba satellite p855-31v *.

  Could you help me please?

  Usually very important to install and update the drivers in the correct order.

  The + installation instruction doc + you can find on the page of the Toshiba UE (Windows 8.1 update) driver provides this order:

  1 Intel Wireless display uninstall
  2 windows 8.1 update to install
  3 TOSHIBA Assist Desktop Upgrade
  4 Intel Display Driver upgrade
  5 NVIDIA Display Driver upgrade
  6 Intel Rapid Storage Technology driver upgrade
  Update 7 Synaptics Touch Pad Driver
  8 update of Realtek Wireless LAN Driver
  9 Intel PROSet/Wireless WiMAX software update
  Update the driver from Tuner DVB-T/ATSC of 10 YUAN
  Update driver TOSHIBA 11 Support
  Upgrading TOSHIBA 12 system pilot
  TOSHIBA 13 function key upgrade
  14 TOSHIBA eco Utility v2 upgrade
  TOSHIBA 15 fingerprints digital utility upgrade
  TFPU 16 WBF deleting fingerprints tool upgrade
  17 TOSHIBA HDD Protection upgrade
  18 TOSHIBA VIDEO PLAYER Upgrade
  Update of the 19 TOSHIBA Blu - ray disc player
  20 TOSHIBA PC Health Monitor Upgrade
  CyberLink MediaShow 6 21 for upgrade TOSHIBA
  ArcSoft 22 TV5.0 update
  Plug-in for Windows Media Player upgrade 23 TOSHIBA resolution +.
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  Update 25 TOSHIBA Service Station

• Problem after the installation of the language

  I had a disk crash and need to re - install photoshop and first elments 12. After the installation of the drive of these two programs, the language is English, although I pulled DUTCH on the installation process. UN - and reinstalling both programs stay with the same problem. Please inform how the change of language/setup can be done.

  Dear Romano,

  Thanks for the guideline.

  I finished the successful re-installation. Finally, the program works in the Dutch language!

  Although this was done after a long time experience and installation in various ways.

  When I choose my home region of the Belgium, the program is in English.

  When I choose the region of the Netherlands, the language is Dutch.

  You know that the population of the Belgium is partly Dutch, partly of French speaking.

  Also, I found that my Windows 10 (64-bit) does not work the ss12 program in the Program Files (x 86) folder.

  Under normal Program Files, the program works.

  BTW, I always installed with administrative rights.

  Best regards

  Jacques Dekimpe

• Installation of Win XP on Satellite L40 - 18Y

  I bought a Toshiba Satellite L40 - 18Y Vodafone along whit the preinstalled Windows Vista Home Premium. I want to put Windows Xp but it sems that the installer does not recognize the HARD drive (in the BIOS displays the HARD drive). I have

  have shearched other threads and found answer but seems that doen't work. I have a USB flash drive. My flash is considered to be a boot and I can install windows on it for :).
  Help pls to install Windows Xp (to see the HARD drive) and pls if can tell links to all the programs that I have to download and what to do the passing noobis :)

  Installing a version commercial (street copy) of Windows XP on a Toshiba Vista laptop.
  ----------------------------------------------------------------------------------

  If the laptop is a separate version of BIOS for XP and Vista, download and Flash the BIOS on the Vista BIOS XP.

  If the installation of XP does not detect the SATA hard drive, simply turn compatibility SATA Mode in BIOS if this option is available.

  If this option is not available, you must use the SATA drivers diskette during installation of XP. Follow these steps:

  (1) Download driver Windows XP SATA F6 on the site of Toshiba Support/downloads.
  If an individual F6 driver is unavailable, download and uncompress the Intel Matrix Storage Manager driver. The Intel Matrix Storage Manager driver package must contain some files under the folder "F6flpy". For example: database ICH7M_32bit for an ICH7 chipset during installation of Windows XP 32-bit.

  (2) copy the files from the driver F6 (iastor.inf, etc.) on a blank diskette. The files must reside in the root directory of the floppy disk. For example, A:\iastor.inf, A:\iaahci.inf, etc...

  (3) use a Toshiba USB floppy drive with the Toshiba laptop. (some non - Toshiba USB Floppy Drives may not work correctly during the installation of XP)

  (4) (4) demarrer start from the Windows XP CD, start the installation and make sure that the disk is inserted in the floppy USB drive.

  (5) for the XP installation invites you to press F6 to install a storage driver, immediately press F6.

  (6) for installing XP you invites to select a SATA driver, select the appropriate driver and continue. For example: ICH7M Intel(r) 82801GBM SATA AHCI Controller, Intel(r) ICH8M 82801HEM/HBM SATA AHCI Controller

  (7) keep the attached floppy drive and floppy disk inserted XP has not completed its installation. Do not partition or format the hard drive during the installation of XP. The diskette SATA drivers are copied and stored on the hard drive during the installation of XP.

• ProBook 640 G1: Audio HW buttons problem after Windows Installer 10

  Hello world.

  Last week, I upgraded from W7 to W10, installed all the drivers from HP and upgrades all the buttons and then the keys fn + hardware configurations worked as expected.

  Today I swapped HDD with SSD and installed a clean W10. Yet once with all HP drivers, including sp71790 Hotkey support and support wireless sp71707 button.

  Now the wireless button keys fn + f9/f10 and fn + f6/f7 works as it should, but rather:

  -the works of Mute speakers button (speakers get mute and screen popup confirmation appears) but still, it stays white and is not orange when muted. It's infortunate because mute State speaker is missing.

  -does not work microphone mute (fn + f8) and signalling led on the button turns on. (The microphone itself works, but she's not get dumb).

  These features worked flawlessly in W10 when upgraded to W7. In the new facility, that they do not.

  Can someone help me?

  Thank you.

  PROBLEM SOLVED

  Audio chipset on my G1 640 is audio IDT high definition.

  Unfortunately, it seems that no updated drivers are available after 2014 - win8.1

  I just took and installed the IDT audio driver in the list of drivers for the G1 640 win8.1.

  Now, all the keyboard shortcuts work properly and a panel of additional audio control with various features and functions has been added.

  Win10 instead by default installs a sound driver of 'High definition' of Microsoft which is probably a simplified version of vanilla with no improvements, but the most important is not well interact with HP quick access keys.

  HP should get aware of this and direct customers towards using the old win8.1 IDT, not the driver Microsoft.

• Tecra S1 problems after SP2 installation

  I have a problem when I use SP2 on my Tecra S1. After you install SP2, my pc crashes when I use the function 'stand by' or 'Hibernate '. It comes with a conflict of interrupt on irq 11 and begins to restart again. Whenever the pc starts again, the blue screen appears with the problem to irq 11 and the program that does, it apears at the bottom of the blue screen, should be "gv3.sys. I did al updates on ' information to update the driver for Windows XP with Service Pack 2 - v1.1.pdf ", but without success. The pdf file say I need to update the driver power saver to version 1.00.34M version, but I can't find it on the site. I use the Dutch version of WXP and the only driver I can find on the Web site is the 1.00.32M version and the English version is the 1.00.34M, so maybe that's the problem. I tried with a clean version directly from the restore CD but I came up with the same results.

  Who can help me to fix this, or point me in the right direction.

  Hello
  you are absolutely right! The 1.00.32M version is the most recent for your machine (for the Netherlands).

  Do not irritate cause there is a version higher than for other countries. The functions are equal.

  Try again with this version and keep us updated, please!

  Good bye

• Problems after the installation of recovery disk

  Hello

  I just reinstalled Windows with my restore disk after that I install all my backups were useless because I had installed and not 32-bit 64-bit applications

  Thanks for this report, but before you begin the installation of recovery, you must know exactly what you're doing that.
  Be careful next time and don t install wrong OS version.

  Bye and good luck

• Internal problems after the installation of the new HD

  I have a mid-2009 MacBookPro (4 GB of RAM, 2.26 GHz) Mavericks (10.9.5) running with a newly installed 1 TB HD previously I was running my most fat but my old iTunes library (12.3.1) hard drive out of my Time Capsule knew that it was a bad long-term solution has therefore updated the internal HD. I have also two external drives 4 to for backup.

  I copied all my files of music from the TC at the new internal drive and have disappeared in the iTunes preferences and changed my iTunes Media folder location for:

  / Users/username/music/iTunes/iTunes Music

  When I have my Time Capsule mounted all works fine (even if I'm missing some album artwork that was there yesterday before I disassembled the TC). When I disassemble the TC a window saying:

  "There was a problem connecting to the server"My name Time Capsule.""

  The server may not exist or it is not available at this time. Check the server name or IP address, check your network connection and then try again."

  After clicking on OK one iTunes window says:

  "The song 'xxx' could not be used because the original file cannot be found. You want to locate? »

  When I click on 'Yes', he takes me to a finder window titled "open type" at the top which is under 'Music' on the left side of the window.

  When I use Spotlight to search the iTunes Media folder it takes me to a window showing a path:

  Users > my name > music > iTunes > iTunes Music > music > iTunes Media

  The title of the record is "automatically add to iTunes". Get Info says that it is 152 KB 1 point, but when I open it it seems empty.

  Yesterday it was working fine. First I dragged everything music in iTunes, but it didn't work. When I opened the folder music and copy all the files (group names) using command + A to select all the and then slipped and fell in all copied iTunes on iTunes. Most of the work was there and I added the missing if necessary illustrations.

  Today, I'm having the problem described above with a huge loss or the cover of the album art. It seems that all the files on my TC are also on my internal HD Somethings doesn't. What Miss me? I understand my folder paths (?) are probably a bit redundant in some way or other, but I don't that would be the problem.

  Another thing I noticed. When I get the info on a track, it says the file path is:

  / Users/username/music/iTunes/iTunes Music track name / artist / Album / 01 1.m4a

  Yesterday, I searched for duplicates and trashed the duplicates with 1.m4a while keeping the same files without the 1 and just track .m4a name

  Changing preferences tells iTunes where start storing any future media that you add.  It does not get iTunes to inventory a location for old media.

  Looks like you were using an optimal inferiority configuration when your library has been shared between two discs. You have media in one place and all support files in another.  If you do it this way, you will have to use iTunes to move files by consolidating them to the new location.

  12 iTunes for Mac: change where your files stored iTunes - http://support.apple.com/kb/PH19507 - unfortunately it is misnamed.  It should say "where your media files but not change where your library files are stored"-more information: https://discussions.apple.com/message/22026652#22026652 - and steps 5 to 8 in https://discussions.apple.com/message/24491967#24491967

  12/2015 https://discussions.apple.com/message/29475217#29475217 - "after you change the location of the iTunes Media folder to a different location, you must use the"consolidate library"command so that iTunes copy media files to the new location.  iTunes has to do, so that iTunes can keep track of where all the media files are stored.  It is a menu bar control->-> library-> organize the file library, and then consolidate the files (checkbox). "

  In your current situation, you can try to find a lead when iTunes asks you to locate him by going to the right file on your internal drive. If you're lucky iTunes will take time to try to reconnect to the others based on the location of this one track on the new disc.

• Outlook 2007 POP3 problems after the installation of security updates

  After the updates of security for December 2010 has been installed on my computer, my Gmail POP3 does not. My access code are rejected.

  The i uninstall KB2288953 and after this operation bit is working again.

  See...

  • Microsoft Outlook 2007 may have problems to send/receive or performance after a recent update has been installed on the computer (17 Dec-10)
    http://support.Microsoft.com/kb/2485531

• IPSec woes - problems after the installation of firewall between IPSec endpoints

  Hi all

  I recently had to install some pix from our internet router to some internal routers in a branch. A small preview:

  router Internet <-->PIX pair FO <-NAT->routers <-->Switch Fabric

  Basically, internal routers used to have interfaces with IPs turned to the audience of our external block. I had 2 tunnels GRE IPSec running on one of them and had users who log in to the House through 1721 s. Since we have very little space, I had public address the PIX redirect internal routers and go from there.

  So, here's where I am--my tunnels show top/towards the top, but I can't talk about anything that either internally sent by routers. All this worked * prior * me having to redirect internal routers to get the firewall in. I'll post all three configs (firewall, router, router internal) to cleaned formats such as text attachments. Note, also, that I left the pix traffic large shipping open until I can solve this problem. I'll reapply my more restrictive ACL when this is fixed.

  Just as a point of reference:

  200.200.200.200 - static IP router (by ISP)

  100.100.100.100 - public ip address who * was * on our external interface of our internal router, which is now on the pix as a static to the new ip address of the router.

  172.18.201.0/24--Le internal network, I created to re - treat routers to be originally the inside interface of the pix

  Example of House is the remote router of 1721, the Interior router example is the internal router and firewall example is our pix 525 just installed.

  I would like to know if there is more I should include...

  Thanks in advance!

  -Tim

  The statement of the route on the pix will require the subnet mask:

  Route inside 100.100.100.100 255.255.255.255 172.18.201.4

  After you change the static method, remember to do a clear xlate on the pix: clear xlate local 172.18.201.4

  You don't need to assign the card encryption at int of closure. If you do, these are in global configuration on the router mode:

  card crypto mapname-address loobackx, where x is the number of loopback, and mapname is the name of your crypto card (homevpn, I think it was). If the local address is not the right option, simply enter the card encryption? to invite the global configuration and you should see text referring to the allocation of an IP as source for traffic using ipsec.

  Notes:

  1. on the router tunnel interface will use the same loopback interface as its source too. With the card encryption applied to the actual physical interface routing if you do not have to create maps of route to route to the closure to apply ipsec processing.

  This should take care of the GRE and IPSec traffic. Is there any other traffic should I consider?

  Take care to archive the current configs on the internal router and pix before you make these changes to restore more easily to the case where things go wrong.

• Analysis of the problems after the installation of Adobe Reader DC

  Hallo,

  I have a PC, 64-bit Windows 10, Fuji Xerox printer model CM205f.

  Until that I installed Adobe Reader DC, everything worked well, including scan from the printer to the PC by direct USB connection.

  After you have installed Adobe Reader DC, I can print files, but the scan from the printer to the PC (by direct connection of USB, no hub) no longer works.

  Fuji Xerox printer has a Chief Express Scan that defines which drive/folder scanned files should be saved. I ran the Express Scan Manager to renew the bond, but always scanning does not work.

  The problem started after installing Adobe Reader DC, I approach this forum to ask for solutions.

  Hi oemlegoem,

  Please see this KB doc for help: issues in Adobe Acrobat troubleshooting scanner and check if it solves your problem.

  Let us know if problem still persists.

  Kind regards

  Meenakshi

• problems with 2nd installation of creative suite 4 "design premium" - iMac (end 2013)

  Hello

  have a design premium cs4 installed on a MacBook Pro in 2010. now, I have installed this package on an iMac (new docking station).

  result: all programs are running, are broken and indesign don't say no function for the license?

  a valid serial number is available, and the license agreement is no problem (same network).

  I would like to install all of this service line-now with available since 2010 serial number.

  do I have to uninstall all the programs before or can I download and install all over the damaged version, I did?

  Thanks for the help!

  Use the Adobe Creative Suite cleanup tool
  ---------------------------------

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html