Problems after auto update

Similar Questions

• XP crashed after auto update

  XP crashed after auto update on asus netbook. No recovery method does work it IE safe mode, last known config, bootlogging etc. Systems freezes at \drivers\mup.sys

  
  «.. . We have revised the installation packages for MS10-015 with new logic that prevents installation on systems if there is certain abnormal conditions of the security update. These conditions may be the result of an infection by a computer such as the Alureon rootkit virus. If these conditions are detected, the update will not install, and the result will be a standard Windows Update error. If a user receives this error, they should go to the following landing page for additional help:

  http://www.Microsoft.com/Security/Updates/015 "

  Source & more: http://blogs.technet.com/msrc/archive/2010/03/02/update-ms10-015-security-update-re-released-with-new-detection-logic.aspx
  

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Problems with Auto-updater after re-installation of operating system and creative suite for CS3

  Hello

  I had to reinstall my operating system. After that, I downloaded my CS3 Design Premium Creative Suite Adobe and reinstall applications. Now, when you open an application, I get an error of auto update. I just spent an hour talking to technical support to learn that they provide is no longer supported for earlier versions and request assistance here.

  Just going to leave the intro here first to see if someone is in the listening/still interested in helping with this 'old version' / error message.

  B

  Try direct updates

  https://www.Adobe.com/downloads/updates/

• After auto-update to 38.01 - Firefox barely works.

  I upgraded somehow 38.0 conducting with exactly the same way, now. I huge lag when typing in the search field and incredibly slow page loading. IE works perfectly (well, as perfectly as a link with known current issues in this node - but it's an ISP issue). I tried a totally new facility 38.0 and 38.01 remove every trace of Firefox via the run / % appadata %, everything Firefox-associates of the HD (x 64 Moreover etc.) and I am puzzled. IE load a little slowly, but as stated before, known problem with my connection sometimes. Even using Firefox functions in menu options takes 7 to 10 seconds to appear. A new tab is taking, once again, seconds to open.

  I * was * running Adblock Plus 2.6.9 BetterPrivacy 1.68, EPUBReader 1.5.0.6, Norton Toolbar 2014.7.12.14, NoScript, 2.6.9.22, Self - Destructing Cookies 0.4.7, StumbleUpon 4.19 and Xmarks 4.3.6. Only the Norton Toolbar has been disabled on the auto-update, which I activated. Then I disabled each add-on which did nothing. I tried to reinstall without the complete brainwipe 38.01 first in case I had a file corrupted, but... Well, no change, same with two virgins installs of 38.01, then 38.

  I just ran a complete system scan of Norton - just 33 rejected of IE (ugh). There is not much I can add have acted a bit hastily just wipe everything - but in my defense, I was always able to fix any FF / nitpicking trouble myself (not afraid to go in the bowels, where this is necessary to change the values healthy from authorized sources) when they took place. Usually, a new installation circled if things start looking really bad, one or two times over the years, I had to serve and leave of completely, but this is the first time I had this works do not at all...

  I know there is probably nothing that someone can suggest in particular, but I hope!

  Thank you for following up - can try you with this driver directly from nvidia GeForce 8400 M G graphics card:
  http://www.GeForce.com/drivers/results/82468

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• Re: Satellite L500D - boot problem after BIOS update

  I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
  When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

  I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
  Please Please HELP, very appreciate.

  TKS

  Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

  Check it once more to see if the same thing will happen again. Display the results.

• UEFI problem after BIOS update

  Hello

  I've recently updated the version of BIOS for the Envy 15 J049TX.

  After the windows update shows "not properly configured SecureBoot.

  Please suggest a solution

  Hi Provost,

  I'm happy to announce that I have overcome the problem of activation of the SecureBoot. I saw an option in BIOS-> setting-> 'HP Factory loading key' Boot. After I loaded the default keys to toggle SecureBoot option has become active and I was able to activate SecureBoot. I applied the last update of the BIOS and has been able to activate SecureBoot successfully after the update.

  I wanted to know if this method is safe and that there can be no other effects on the other parts of the system.

  Thank you very much for the help.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• Problem after the update from Windows 7 18. July 2013

  When you try to open a new project or open an existing project first Elements 9 starts to load files, but stops after 20 seconds without error message.

  Is there a way to fix this without uninstalling the recent updates?

  Gunnar-Uetersen

  Ko Windows Update the only problem we know refers to the recent screen Windows Update kb wmv 1/2. This issue is highlighted in the ad at the top of the forum. For your convenience, it should look like

  

  If you have already done, faster action would probably be to uninstall the updates immediately preceding the Premiere Elements 9.0/9.0.1 problems appearing. Updates of Windows may have nothing to do with this problem, but to exclude it if she's not involved and fast if it works.

  Were you move media source for your projects after projects were closed?

  You can also, depending on how things are going, to check out the Adobe Tech document on damaged projects...

  FBUS.html http://helpx.adobe.com/Premiere-Elements/KB/Troubleshoot-Damaged-Projects-Premiere-Element

  We will follow your progress.

  Thank you.

  RTA

• Disable the auto restart after auto update

  I can't express how frustrating, it is at the foot of two hours of hits for a drink, to return to my job cancelled by an automatic restart after Windows update. This kind of thing has happened several times. And as I have a Vista Home Premium, I did not have access to group policy to turn off. So guys, how to prevent windows to lose more of my work with its seedy characteristics? Thanks in advance.

  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  «Using Windows Update in Windows Vista»

  Change how it gives you the updated to: ' check for updates but let me choose etc "> etc.". "

  See you soon.

  Mick Murphy - Microsoft partner

• Streaming video of problem after the update of the lollipop

  While playing a video in YouTube and Facebook, I get an error. All the world experienced? This is all after update 5.0.2. I also did a factory reset after the update but I still have the error. Peut some o

  don't help me?

  

  

  This also occurs if try you it in safe mode?

• Management of the problems after the update 27/01/2016 of the files

  I edit in PS after LR on most files.

  I often put feathers masks extremely on in my files.

  Everything was fine until today, after the update.

  Now, after recording in PS go back to LR, LR watch preview masks also moulted hard lines.

  It does not resemble it in PS, as LR. And it exports with the hard lines of LR.

  I tried to update the previews, I toggled and saved with the layers on and outside. This is definitley the layers and it's certainly the way LR is their reading.

  Any ideas?

  Official Adobe Forum to report bugs:Photoshop community customer family

  Already, there may be a thread here on this issue. If so, you can add your vote. If this isn't the case, you can start your own.

  HAL

• persistent problems after an update

  Hello

  I hope you can help here

  I have an iMac on El Capitan 10.11.5

  The last update I was last Saturday morning.

  Beware... I'm not very familiar with the technical aspects of Mac (this is why I chose Apple!). And I'm french (bad English).

  I have some questions:

  -impossible to do a restore with the time Capsule (I have all the frames with the story, but a few 'restore' button stays grey

  -my external hard drive (USB) turns off without reason

  -You cannot have a Time Capsule backup since last Saturday (my Time capsule stuff is on my external hard drive)

  Walt, I tried:

  -Restart the Mac

  -throw backup time capsule of 2014 in the trash (ongoing)

  -clean backups Time Machine as 'ongoing'

  -Cannot use the disk repair tool to try to fix my drive time capsule

  I'm sure that you will need more information so don't ask!

  Thanks in advance

  Hello. Have you tried restarting your Mac in Safe Mode?

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• PAVILION NOTEBOOK 15 K7Q21EA #: SCROLLING WINDOWS PROBLEM AFTER BIOS UPDATED 10 (08/03/2016) PAVILION 15 YESTERDAY 16/10/2016

  CANNOT CONTROL THE SCROLLING. CURSOR DOWN TO THE LOW WHAT MAKES IMPOSSIBLE TO SAVE TO A FOLDER

  Hi @STICKMAN5124,

  Nice day! Thank you for your participation in the Forums of HP Support! It is a great location to get resolutions and interact with experts from the community. It will be a pleasure to help you.

  I saw the post and understand that after only a bios updated cursor drops down due to a problem of scrolling.

  Impressive work, do the update of the bios. Kudos to you for this. It is a privilege to work with tech-savvy and technically competent customers like you and we greatly appreciate your business with HP. You have been great to work with.

  Please check in F2 diagnostics if the scrollbar works correctly. If Yes, then you can update the chipset drivers and http://hp.com/drivers touchpad drivers you can also consult with a mouse external further isolate the issue.

  You can also run diagnostics on the touchpad from this link by going to the UEFI F2 diagnostics: http://support.hp.com/in-en/document/c03467259 please run the complete components. If any component fails, please note the failure code. This is done to determine if the problem is hardware or software partners.

  If it passes and scrolling works very well, please perform these updates. If you are still having the same problem on page F2 UEFI (screen) then you could roll back bios after performing a hard reset. Link for the hard reset: http://support.hp.com/us-en/document/c01684768

  • Please perform this step to roll back bios.  Hold down the "Windows" key and the letter "B" at the same time, then press the power also button for about 5 seconds at the same time.

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.