Problems after installing the new disk in the Satellite M70 151

I have a Satellite M70-151 the hard drive gave up and was unreadable, before that I was using with my desktop via a router, that it worked very well. I had no option but to install a new hard drive now in System Manager, I get of the yellow question marks against:
Other features:
? Mass storage controller
? Network controller
? Modem PCI
? Video controller (VGA compatible)

I searched and searched, but can not find the drivers for these 4 things

I have sound but only weak, I don't have a WiFi Yes feature I tried to install the good (as advised by Toshiba) Lan Driver [link to driver | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=58122&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8]

When I try to install it says "the device may not be present or could have been ejected/disconnected from the system.
Insert or reinsert now. "
I know I am being thick but I was under the impression that the Lan has been integrated into the laptop? :_|

I would be sincerely grateful for all of the advice of my peers. :)

Stuart

First of all, we should start with basic information;
The M70-151 Sat belongs to the series of PSM71E that's why you should choose this issue of the European driver Toshiba page if you want to download the correct drivers.

_You will need these drivers: _

Mass storage controller I think it is a cardbus driver
Controller - s network a LAN or WLan card computing. First, check which driver is already installed
Modem PCI driver modem ;)
Display video Controller (VGA compatible) driver

Greetings

Tags: Toshiba

Similar Questions

  • Problem after installing the new drive on Pavillion G6-2320

    The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

    After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

    Not found boot device

    Please install an operating system on your hard drive

    Hard drive (3FO)

    The F2 System Diagnostics).

    I went to F2 and test the hard drive. Everything was made. Help please!

    Thank you

    Hello:

    You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

    HP is not delivered replacement hard drives pre-configured with any software.

    They should also ship you the free of charge from the PC recovery discs is still under warranty.

  • Problems after installing the second SATA drive in Windows 7

    I just install a second SATA hard drive in Windows 7. Currently, I use only a processor AMD Athlon X 2 4800 with 3 GB of RAM, Windows 7 64 - bit, installed on a 400 GB Samsung SATA drive and have two (a pioneer and a Liteon) DVD burners.

    System worked fine until I put in the new drive. Previously, I had hung as such discs: SATA1 was the existing 400Go drive, SATA2 and 3 were two DVD burners (don't ask me why, I have 2, will remove one of them, if that's the problem).

    Installed the new HARD in the SATA4 drive. Booted up, saw the new drive in the BIOS, but Windows does not see it until I went to disk management, a drive letter assigned and formatted etc. Also, I swapped the drive letters so I had all of the HARD drive (I have my 400 GB split into two readers via the partition) and C: D: E: F: and G:, DVD players.

    Started, began to transfer data from D: to the new E:, and Windows crashes. No message error, everything freezes. Need to reset, and then allow Windows to check for errors etc. Return to Windows, same case again. I swapped the SATA cables so that SATA1 and 2 are the HARD drives and SATA3 and 4 are DVD players. Reboot, same case.

    What I am doing wrong? Or what should I do? I don't even have to start the transfer of data I just let WIndows running for 2 minutes and it automatically hangs again.

    If someone could help me as soon as POSSIBLE please, it would be fantastic. Thank you!

    I've been in contact with the provider, and Yes, that will take it back for Exchange. They gave me some ideas to try first, I'm going to do tonight; They asked me to check if the HARD disk is running on series complete ATA (SATA) mode and to enable the DMA if he asks me to. Otherwise, they said, try the fail-safe mode. Don't know if any of them are currently enabled etc but will find tonight.

    All else fails, I take that back! Simply means a 3 hours trip to Melbourne to make...

    Thanks again guys for your help.

    Michael.

  • Problem after installing the driver VGA for HP Pavilion 1212TX g4

    Hello. I just bought a new HP Pavilion 1212TX g4.

    I install Win7 Ultimate Pro in it and no problems found. But after I installed the VGA driver (ATI Catalyst) the problem occurs.

    The error occurring on the screen is something like this: Access Violation (0xc0000005).

    Cannot run multiple applications installed once the error occurs (for example: iTunes, Nokia Suite, Adobe Reader).

    I am looking for the AC VGA driver for HP Pavilion 1212TX g4 but the problem still occurs.

    Please someone help me. I can't use my new laptop

    Thanks in advance

    Herry

    If you have installed the drivers from various sources I start over with a clean install of Windows 7 at this point and use the specific drivers for your model >& drivers starting first with Chipset and AMD graphics card, driver Intel Rapid Storage Technology and all other cases.

  • Satellite P100 - display problem after installing the Samsumg software

    Hello

    I have a Toshiba P100-PSPA3 and just bought a new external monitor Sincmaster from Samsung. I installed it yesterday and everything works fine, I just plug in and the laptop recognizes it as a second monitor. Then I noticed the monitor comes with a CD and they recommend you to install the components of this CD.

    I installed the driver and still works fine but then I installed a software called * Magic money *, it is said that I should make a new start, I did and the image comes in the second monitor, * my laptop screen is black.*
    Then I begin to try all the possible solution I had in my head. I open this Magic Tune, and he says that it s not compatible with my computer, so I uninstall it. I have downloaded the drivers from Nvidia, Toshiba, installed again and again doesn´t work.

    I prove with the nvidia settings and the West without change. NVIDIA doesn´t recognize my laptop as a monitor, screen it recognizes just the Samsumg Sincmaster.

    I looked for people with the same problem in other forums and a possible solution was to turn off the computer, remove the battery and press the power for a few seconds, trying to carry out the computer. I did and it didn t work.

    Someone here could give me a light? I m totally lost now and I have to work with my computer in the next few days!
    Thank you very much
    Ivan

    Hello

    This software is not known to me and it is important to say that notebook manufacturers may not support some third part software.

    I put t know if this software must be preinstalled but I'm sure you can use your external display without it. When the external display is connected, you can switch between the LCD and external monitor by using the FN + F5 key combination. If you want to extend the display outside a use Windows display settings. It should work. I tested several laptop Toshiba with a few different monitors in my office and I n t noticed no problem.

    Have you already solved your problem or you are still looking for the solution?

  • Problems after installing the new hard drive

    It has just been put again hard drive and I already made a backup to, it doesn't seem to be
    microsoft ripheriques of work .no I also did get back on two front disc

    * original title - it was just put the new hard drive *.

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

    Yesterday, my 11IBY-100 s installed update 10 birthday Windows (aka Windows 10 Version 1607). Now, it has multiple problems and is unusable.

    1. the keyboard (Yes, the built-in keyboard) does not work. None of the keys (letters, numbers, 'actions' as BACKSPACE) work not at all. If I plug in a USB wireless keyboard, it works fine. So maybe there is a problem with the device driver for the built-in keyboard with the update of the anniversary. The keyboard works perfectly until Windows Update installed upgrading birthday.

    2. the trackpad is not working. If I plug in a USB wireless mouse, it works fine. So maybe there is a problem with the device driver for the trackpad with the update of the anniversary. The trackpad has worked very well until Windows Update installed upgrading birthday.

    3. the Kingston 32 GB microSD card plugged into the microSD port is not recognized by the file Explorer. If I plug the 32GB Kingston microSD card in a USB microSD card reader and plug the card reader into a USB port, microSD storage is recognized in the file Explorer, so the microSD itself is fine. So maybe there is a problem with the device driver for the port microSD with the update of the anniversary. The microSD port works great and the micro SD card has been recognized in the file Explorer until Windows Update installed upgrading birthday.

    4. There is no audio data, Windows now indicates that no audio hardware is installed. So maybe there is a problem with the device drivers for the builtin microphone and the built-in speaker with the update of the anniversary. They worked fine until Windows Update installed upgrading birthday.

    I tried to do a RESET, but unfortunately although the reset worked, it resets Windows 10 Version 1607 (aka anniversary update) not an earlier version of Windows 10 and I still have all the problems above. Far as I can see, the Windows settings now say there is no history of update and no previous version of Windows, so I can't use any method of recovery which is available on the PC itself to go to an earlier version of Windows.

    Please can someone advise how to reset my PC (and where I can get the 32-bit Windows 10 appropriate ISO file or other) Windows 10 Version 1511 (i.e. before the update of the anniversary)?

    Or, Alternatively, device drivers are valid for Windows 10 Version 1607 for builtin keyboard, trackpad, port, microSD, microphone and speaker available somewhere? I can't see on the Lenovo Web site.

    Ron

    On the Lenovo site, in "Drivers and software" for this unit, there was a "Chipset" called driver «Intel platform driver for Windows 10 (32 bit) - Ideapad 100 s-11IBY» I downloaded and installed, then after being invited, rebooted the device. I am pleased to announce that

    the keyboard now works

    (b) the trackpad works now

    (c) the microSD card is now recognized by the file Explorer

    (d) the audio now works

    Ron

  • I can't sync my iPhone 4S with my Macbook Pro more. It became a problem after installing the latest update.

    A couple of weeks ago, I upgraded my iPhone version 9.2 and iTunes on my Macbook Pro version 11.4, and now I can't get my iPhone to sync with my Macbook Pro. Whenever I connect the two devices, I get an error message that says: "the 'IPhone of John' iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. "

    I tried a lot of things, starting with resets hard and finally erase all data and settings of my phone, but without success. I would use an iTunes backup, but he refuses to communicate with my iPhone.

    Is anyone familiar with this problem? Thanks for your time.

    You you make sure that you run version 12.x iTunes on your Mac? If your OS x cannot run iTunes 12, you cannot synchronize your phone more set to update to iOS 9.x

  • Cisco VPN problems after installing the 506e

    My apologies if this makes no sense, because it is my 1st install of a PIX.

    I distance support external sites and had a Cisco VPN 4.6.00.49 connection through our Linksys router for access, company which worked a treat. We asked to have VPN access to our society, so I replaced the Linksys with a 506th PIX. I ran the Wizards(Yes I heard the gasps from 90% of you then) GUI access Internet out worked, came from e-mail in Exchange server and external users could vpn in our internal network. Great, I thought!

    BUT NOW

    I have a problem with coming out through the 506th pix VPN.

    My client connects to the external site. Authenticates the Logni & assigns a valid IP address. Unfortunately I couldn't make a ping, rdp or anything with the remote network.

    Thanks in advance

    Paul

    Paul

    Sorry, I wasn't clear on my post - that the order was necessary on the remote device. In any case I'm glad to hear his work.

  • memory problems after installing the network card passthrough.

    First of all, Thanks for the help.
    I installed a network card passthrough directly to a Windows machine on ESXi 5.1 and start the machine when I get the error:

    Group VM.6791: invalid parameters for VM memory allocation vmm0: XXX. () min: 3670016, max:-1, minLimit:-1 actions:-1 units: pages)
    Group VM.6791: cannot Admit VM: memory admission check failed. Asked booking: 3716761 pages
    SharedArea: Unable to find 'testSharedAreaPtr' in SHARED_PER_VM_VMX domain.

    I looked at articles and don't see that only the value parameters Backup of the RAM, but If I change these settings, I get the following error:

    Not valid parameter memory: memory reservation (sched.mem.min) must be equal to memsize () 14336) .

    Thanks for the help.

    What is the memory you have allocated for this machine?

    Can you increase the amount of memory reserved for this virtual machine to its configured memory size and try to turn it?

  • problems after installing the latest version of Camera Raw

    Hello

    After Camera Raw update (now I n 8.4.0.199 version), I no longer see the command:

    ("Open in Camera Raw Image" in the right-click inside the bridge controls)

    Also, when I use Camera Raw in Photoshop, I do see the effects in Bridge

    can you help me please?

    Thank you

    Replace the existing plugin of camera for photoshop cs6 with the one you can download from the link above

    Once you might have to purge the cache for all folders you displayed with the old camera raw plugin.

  • Satellite M40-145: can I install the Satellite M70 another diffétent Bios?

    I have a M40-145 and I need to update my bios to 5.1 using Windows Vista and my computer just Toshiba have 1.7 Bios.
    I can't install 5.1

    Hello

    No, you cannot use the BIOS versions designed for laptops different models!
    This may damage your motherboard for laptop!

    So don t try it!

    But why you want to update the BIOS? You have some problems?

    Thanks for posting more details!

  • PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

    I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

    The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

    I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

    Finally, I have checked the audio drivers and the reporting system they work without any problem.

    What should I do next?

    Thanks, Terry

    @Terry57

    Thanks for the reply,

    I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

    However, I have provided details below:

    To perform a hard reset on a computer equipped with a removable battery, follow these steps:

    1. Turn off the computer.

    2. Remove the computer from the docking station or port replicator.

    3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

    4. Disconnect the power adapter from the computer.

    5. Remove the battery from the compartment to batteries.

    6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

    7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

    8. Press the power button to turn on the computer.

    9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

    10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

    To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

    1. Turn off the computer.

    2. Remove the computer from the docking station or port replicator.

    3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

    4. Disconnect the power adapter from the computer.

    To perform a system recovery, this link should work: click here

    Keep me posted for any technical assistance,

    Kind regards

  • HP LaserJet P2035n: HP 2035n ceases to printing/answer after installing the new toner

    Hi, I work for a School District, we have several of these printers and recently had this problem on 2 machines. Problem is that the printer is completely insensitive after installing a new toner real HP 05a.

    Install toner turn printer on, it passes through the light initialization sequence and shows ready, will not print a test page for the PC, will not print a page of the control panel of the printer configuration, will not be recognized through its USB connection (PC gives same message the USB is damaged or defective), does not pick up an IP address and is not accessible via the Web console.

    Turn the printer off and reinstall the old toner put under tension and everything works again, USB is recognized and system installs the drivers, accessible via the Web console, prints the config to the PC and the control panel of the printer. I have 3 used toners and all three will work with both printers, I have 2 new toners and the two do not work in the printer. Thanks for playing.

    I saw a few client computers and forums on other sites about this issue defective chips on the cartridges-back them and replacements should be good.

  • Problems with installing the new version of hp support assistant-sp54373

    I have a Compaq Presario CQ60-202US running Windows 7 Home Premium 32 bit.  A regular HP support assistant began

    and have downloaded the new version of HP support assistant (sp54373) and after installing the new version and rebooted the software he gave me a ' year error occurred "and the HP support assistant stopped working!

    I then tried to uninstalled HP adj. and got an error during the deletion process, so I couldn't finish the deletion process, so I did a system restore to a good configuration, so the older version of HP Asst. (ver. 6.0.5.4) can be used until I can get this fixed a problem.

    If someone had the same problem and someone has suggestions on how to solve this problem; any help would be appreciated.

    Thank you!

    Hello

    Try Microsoft 'Fixit' on the link below.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Kind regards

    DP - K

Maybe you are looking for