Problems after installing updates
I use a Web site on the Internet for over 2 years and have NEVER had any problems with it. From this weekend (after the first - the who - is - it - now? - four sets of updates for you guys) I started having problems with the site. I don't know what you've done, but I think the filing of a loss of income claim against you! After each series of updates (that I didn't ask, btw - they start just automatically when I try to shut down my computer! WTH!) the site has gradually become more "defective" and now (after yet another series of updates today) will work AT ALL! I'm supposed to work here, guys and ya'll made it impossible. I am really so angry, I feel liike I'm having a stroke!
Hi sherrysk8,
1. which site are you trying to access?
2. what happens when you try to access the Web site?
3. you receive an error message?
4. what web browser do you use?
Note: Try the procedure only if you use the web browser Internet explorer below.
Method 1
Check Add-ons on Internet Explore to the origin of the problem. I suggest you try opening Internet Explore mode without modules.
(a) click the Start button, click all programs, and click Accessories
(b) click System Tools, click Internet Explorer (No Add-ons).
How the modules of the browser affect my computer?
http://Windows.Microsoft.com/en-us/Windows7/how-do-browser-add-ons-affect-my-computer
Method 2
If the previous step fails then try to reset the internet settings explore by default and check.
For more information please visit the link below.
How to reset Internet Explorer settings
http://support.Microsoft.com/kb/923737
Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Problems after installing updates in Windows 7
After you install the updates that have been downloaded automatically, I was commissioned to do a reboot. Yes, I did. Now I have all the icons on my desktop, just the words. Even on Windows Explorer and my computer seems to run slower. I tried to restore to an earlier date (yesterday), but he said that he did not. I use a laptop HP9420US with windows 7 Ultimate and office 2007.
Thank you for your help.
JoeUpdated - I reinstalled Windows 7 for the 7th time. Just look at thise MS Updates.
Arona,
Thank you for your suggestions.
I tried method 1 the first time I recognized that there was a problem. Nothing has changed.
I just tried method 2 with the same result. I have now many files with IconCache.db.old and
No new (rebuilt) IconCache.db.
I don't have the operation of the start menu. I clicked and nothing happens. I can right click
on it and see properties and open Windows Explorer. I have to use Ctrl Alt Del to
to stop.
I ran the program Malwarebytes' Anti-Malware and it found nothing.
Now my individual windows seem to be transparent at the edges.
I really want to re - install Windows 7 for the 7th time. MS downloads
He screwed up, and I'd like to return to a correct functioning.
Updated - I can't find any file IconCache.db now. What now?
Thank you for your help.
Joe -
How can I fix missing MSVCP110.dll Adobe Premiere Elements on win 10 after installed update. Impossible to correct the problem after reinstalling, deleting and reinstalling.
Hello
Please visit https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html
Hope that helps!
Kind regards
Sheena
-
R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
This message is pop:
Microsoft Visual C++ Runtime library
Runtime error!
Program c:\windows\helppane.exe
R6034
A request made an attempt to load the wrong C runtime library
Please contact the support team of the application for more details
This message appears as soon as the machine restarts
Happens if I try to run Skype
There is no problems until the updates have been installed
This problem is urgent that this computer is used for a company
Thank you
David SchlachterHello
In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=enMicrosoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=enThen uninstall and reinstall the software Skype and check.
I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Boot problems after installing Vista SP2 (KB948465)
I installed SP2 via update. During the update process there was a power failure. After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup. Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.
After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start. After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
I immediately did a system restore to return my PC before SP2 was installed.After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed. It was on 9 November. As I need my computer, I didn't reinstall SP2 until I had finished this work.
As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2. Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.
Between the 10th and today, 14, Windows Update has installed more than updated.
Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
I tried to uninstall SP2 via update. The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure. I used the power switch to turn the PC back on. After startup, the PC told me that deletion failed.Then I tried the system restore. Unfortunately, the first available restore point was post - SP2 installation. I restored it for the point that is as close as I could. I tried to uninstall SP2 again through Windows Update. This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.
I haven't restarted my PC since then. Most updates have been downloaded automatically, and the PC tells me that a restart is required. I'm a little worried that I will end up with a completely insensitive PC.
I use an Acer Aspire X 3200 with Vista home premium pre-installed. I don't have a Vista disc.
Hello, Alex
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot. I get the message "cannot start Windows. A recent hardware or software change might be the cause. File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged. I DO NOT have the Windows Setup disc.
Hello
I suggest you borrow the CD of windows vista to your friends
Method 1:
Step 1:
I suggest you check in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
If you be able to start your computer in safe mode, I'd say make clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to see link and check.
Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates
-
Problems after installing KB978338 on Windows Vista SP2
I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.
System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.
I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.
Please tell us how can I still troubleshoot or solve this problem.
Thanks in advance.
JohnBrown
Halifax, NS
So I "hid" the update and you call this one closed without resolution.
While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.
Repost:
See the section "How to get help" of http://support.microsoft.com/kb/978338
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
https://consumersecuritysupport.Microsoft.com/For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista
I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:
Check the connection of the cable! PXE - MOF:exit Intel PXE ROM.Operating system not foundBackup of disks were damagedstarts from disc downloaded ubuntu, so no problem with a hard drive.Cannot access then unable to return to the last good configuration safe mode?where can I download vista to reinstall?Hello
Contact your computer manufacturer and ask them to send a set of recovery disks Vista.
They should do this for a small fee.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
Read the responses in these links on the false boot order and network devices.
http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html
http://www.computerhope.com/issues/ch000706.htm
See you soon.
-
Windows Mail v 6.0.600016386 went wrong after installing updates and IE 9.
I use windows Mail comes with windows vista. (Not the Windows live, nor outlook.)
After you install the updates and IE 9 on last week, I noticed that windows mail does not work properly.
1. the police in the area "to: subject" above the display of message board is messed up. It seems to be bold and look aweful.
2. the same "of: topic" should display the attachment 'trombone' and if I click on the attachment trombone, he used to give me the option to download it or open it. Now 'trombone' disappeared. Only way to download the attachment is to open the message and drag and drop it on the desktop.
Does anyone else have this problem? How should I do?
Thanks for any info
Sean
It is a known problem in WinMail introduced with IE9. Workarounds is in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/windows-mail-font-problems-after-installing-ie9/a4274c96-d44f-e011-8dfc-68b599b31bf5?page=1
There is no solution and its unlikely there will be one, because the reputation of Microsoft in fixing bugs of WinMail is catastrophic.
Steve
-
Windows 7 - problems after Windows updates
When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet. I talked to HP two hours Monday, 18th and thought we had set. But the updated Windows Update during the night and the next day he couldn't connect to the internet. Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP. I did today and do not connect to the internet. Whenever I have to restore to October 16, which is the last time, he did not work properly. Help, please! Thank you...
Have you tried running the resolution of Internet connection problems after these updates?
Click Start, type: Troubleshooting
Press enter on your keyboard
Do a search for Internet connection
Double-click the Internet connection problems and follow the wizard to display on.
Using Windows - Management, configuration, and troubleshooting updates
http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc
My pc runs Windows XP Home Media edition. I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions." To maintain the stability of the system. Windows must restore the original versions of these files. Install your Windows XP Professional CD2. I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3. How can I stop this happening?
Hello
Step 1: I suggest you perform the SFC scan on the computer and check.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, type the following line and press ENTER:sfc/scannow
Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error
Hello
This link may help: the application failed to start properly (0xc0000022).-Microsoft Community
Kind regards
Sheena
-
Hi I have a problem after installing my CS6. He keeps saying that msvcr100.dll was not found?
Download the runtime MSVC 2010 from Microsoft and install it.
Mylenium
-
Problems after installing Windows Update
Original title: update Windows 7
After Windows 7 automatically updated most of my desktop icons, favorite on my site had disappeared. My home page has been changed and I had to re-select-the. Anyone who met with what I had to do a system restore to do things to normal?
Hello
· Who was the Windows update that caused the problem?
· You have reinstalled Windows Update once you have made the system restore?
If you have not yet re-installed updates you can do so one by one, which will help you identify which update caused the problem. To check the updates are installed on your computer, follow the link below.
http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Get his problem after installing windows update on May 18, 2016
Original title: updated 18/06/2016
Has anyone else been having sound problems with the new batch of updates? I tried to download the drivers, but that didn't work and now I had to restore my system from the 18th daily. Any ideas on how to identify the update is the cause or what driver I may have missed? My computer is a Dell Latitude E5420, running 64-bit Windows 7 Prof. Any other information needed let me know. Thank you!
Hello
According to the description, I understand that you are facing the problem in your computer after Windows installation updated May 18, 2016.
Yes, you can view the installed update so that you can identify the updates that are installed in May 18, 2016.
Please follow the steps to see updates history in Windows 7:
Click the Start button.
Then select Control Panel > programs.
And then, under programs and features.
Select view installed updates.
View update installed please check that the update installed in May 18, 2016 and uninstall the update one & check if the sound is working well and find the culprit, update.
Please follow the methods described below to check if it helps:
Method 1: perform a Clean boot and install Windows Update.
If its a major update, I recommend you put the computer in a clean boot state and install it again in order to minimize interference that could cause this noise problem.
Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How to perform a clean boot in Windows
Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.
Method 2: uninstall and reinstall the Sound Driver.
- Press Windows + X key.
- Type devmgmt.msc (to open Device Manager)
- Find and select the audio driver.
- Right click on the driver.
- Uninstall the audio driver.
Windows automatically installs the generic driver, otherwise I recommend you download & install audio driver on the website of the manufacturer to check if it helps.
Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.
Maybe you are looking for
-
I can of most favorite sites I want to keep for quick reference, must I use IE?
Some bookmarks that worked (VRBO sites for example) is no longer add to Favorites or slip and fall in the bookmarks bar. I wanted to bookmark a State run the railroad in Spain - no dice. IE I would like to do both of the above and previous versions o
-
HP LaserJet MFP displayed as HP LaserJet MFP M127nw Pro M127fw Pro
I have a MFP HP LaserJet Pro M127fw. When I added printer with application code specified printer was a HP LaserJet MFP M127nw Pro. Is this a problem? I use MOSX 10.11.6 on a MacAir
-
NAT with NAT Timeout values 0 A server outside the firewall starts a session on the server inside. The server stores the session via the IP address and the Source port inside this connection must remain open, but if there is no communication after th
-
my vaio media plus is not on my pc more how I download it again
When I start my pc, it says windows configures viao media more, but never do. message says to try to find another way, and sometimes it says Error 1706. How can I download the original version that came with my windows 7 Professional. tried to reform
-
Find an object with an object style and increase its height! …
Hi allI found each (anchored to the current text) 'invisible' block with a specific 'AA' object style and change its height SO its offset is > 180 (depending on the origin 0,0 page by default).This seems to be simple but, still, who doesn't!Thanks in