problems after recent updates of windows
Ive installed the latest patches kb975560, and kb977914 but after 15 seconds yellow sheild tells me that these updates are ready for my computer those im ive just install using windows xp sp3
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339 TaurArian [MVP] 2005-2010 - Update Services
Tags: Windows
Similar Questions
-
Problem after the update from Windows 7 18. July 2013
When you try to open a new project or open an existing project first Elements 9 starts to load files, but stops after 20 seconds without error message.
Is there a way to fix this without uninstalling the recent updates?
Gunnar-Uetersen
Ko Windows Update the only problem we know refers to the recent screen Windows Update kb wmv 1/2. This issue is highlighted in the ad at the top of the forum. For your convenience, it should look like
If you have already done, faster action would probably be to uninstall the updates immediately preceding the Premiere Elements 9.0/9.0.1 problems appearing. Updates of Windows may have nothing to do with this problem, but to exclude it if she's not involved and fast if it works.
Were you move media source for your projects after projects were closed?
You can also, depending on how things are going, to check out the Adobe Tech document on damaged projects...
FBUS.html http://helpx.adobe.com/Premiere-Elements/KB/Troubleshoot-Damaged-Projects-Premiere-Element
We will follow your progress.
Thank you.
RTA
-
Hi people!
After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.
In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.
I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.
What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:
If you need more information, please let me know.
Best regards
Ty
I just tried this driver and I still have sound after 6 resets.
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1
-
Original title: Bluetooth Microsoft 6000 keyboard installation
I recently updated my WIN 7 and since then I could not connect with the keyboard. I am able to recognize and enter the numeric code and the keyboard will appear on the list of devices in the control panel. After that, the Red/Green flashing on the remains of the keyboard and the device disappears from the control panel. Any suggestion would be appreciated!
Hi CliveOshry,
You can try the following steps and check if it helps:
Method 1:
You can try to download and install IntelliType Pro 7.0 depending on the version of Windows you are using.
For the 32-bit version: Download IntelliType Pro 7.0
For the 64-bit version: Download IntelliType Pro 7.0 for 64-bit
Also check if there are optional updates available for the keyboard in the windows updates.
For more information, see the articles:
Automatically get recommended drivers and updates for your hardware
Update drivers: recommended links
Method 2:
You can review the article and check if that helps:
Resolve the failure of mouse or a Bluetooth keyboard to function
Method 3:
You can try to run the hardware troubleshooter and check if it helps
-
problem after 8 updates for windows 8.1 windows
Hi I updated my windows 8 windows 8.1 but after all program in the menu icons START menu button disappeared.
the start menu is now empty. Why is this? any way I can get it all back?
thanxs in advance
Hello
If you had already customized your Start menu, then you will need to return to the store Windows and reinstall applications.
If you see rather Word Apps at the top left, then you are in Apps verses to see the start menu screen. In this case, you should see a small circle with an arrow high inward on the lower left of the screen. If you click on it, then it will bring you to the start menu. When you are on the screen applications all, then right click on any of the tiles and select PIN to the menu start going bust this application to the start menu.
-
Anyone with USB problems after recent updates Microsoft for Windows 7?
A couple of days my Logitech wireless mouse stopped working after my Presario CQ62-225NR restarted to complete the latest microsoft system/security updates, 4/12. Further investigation, external and thumb drives drivers were more or recognized. Here's what I managed to shine since the Device Manager:
********************
Right click on each of these 3 topics and select "Uninstall".
This done right click on any device and select 'Search for hardware changes', it will reinstall fresh drivers for these devices, I hope that this will help to solve.
-
Problems after security update for Windows 7
Recently, my security software - microsoft Windows 7 security, conducted a download and install. After the installation, I'm not able to use the features of Windows 7. My GFxUI does not work, my media center does not work, the computer is a mess. I did a restore of the system without success. Why does this work? That's happened and how the problems can be repaired without having to reinstall again?
Hello
Method 1:
You can consult in this regard of the installed update is causing the problem by removing the updates and install them one at a time. To check the updates are installed to follow the link given below.
http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
Method 2:
Alternatively, you can check if this is as a result of the third-party application installed on your computer. To identify the program that is causing the issue configures your computer to clean boot. To configure the boot of the computer follow the link below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Problems after installing updates in Windows 7
After you install the updates that have been downloaded automatically, I was commissioned to do a reboot. Yes, I did. Now I have all the icons on my desktop, just the words. Even on Windows Explorer and my computer seems to run slower. I tried to restore to an earlier date (yesterday), but he said that he did not. I use a laptop HP9420US with windows 7 Ultimate and office 2007.
Thank you for your help.
JoeUpdated - I reinstalled Windows 7 for the 7th time. Just look at thise MS Updates.
Arona,
Thank you for your suggestions.
I tried method 1 the first time I recognized that there was a problem. Nothing has changed.
I just tried method 2 with the same result. I have now many files with IconCache.db.old and
No new (rebuilt) IconCache.db.
I don't have the operation of the start menu. I clicked and nothing happens. I can right click
on it and see properties and open Windows Explorer. I have to use Ctrl Alt Del to
to stop.
I ran the program Malwarebytes' Anti-Malware and it found nothing.
Now my individual windows seem to be transparent at the edges.
I really want to re - install Windows 7 for the 7th time. MS downloads
He screwed up, and I'd like to return to a correct functioning.
Updated - I can't find any file IconCache.db now. What now?
Thank you for your help.
Joe -
The streaming of Media Center PC on Xbox 360 problems after recent updates
I've been streaming video of my Media Center PC on my Xbox 360 for about a month now. I've never had problems until I installed the new update today. Now I can listen to just a show for about 5 minutes then my PC freezes. My configuration is:
- Windows 7 (64-bit)
- NVIDIA GTX295 1 GB video card
- 8 GB of DDR2 memory
If there is no additional info that could help please let me know.
Thank you
Robert
Hello
1. remember you number updates that you have installed?
Method 1.
Use the homegroup troubleshooter.
a. Please open Control Panel and click on troubleshooting.
b. click on "Network and Internet", then select the homegroup.
c. troubleshooting tool find the cause and fix the problem? If this isn't the case, please move on next steps.
Method 2.
Check the following relevant services.
a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.
Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
b. right click on the "Peer Networking Identity Manager" service and click Properties.
c. Please click the Stop button to stop the service temporarily.
d. access to the following folder:
C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking
e. delete all files and folders inside.
f. start the following service gain: Peer Networking Identity ManagerMethod 3.
You can disable the anti-virus software and check if that causes this behavior.
Temporarily disable the security software installed on the computer and check if the problem persists.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 4.If the steps above do not better work that you can do is to perform a restore system just before the point where the problem occurred.
I have listed a few articles that explain the system restore in Windows 7.
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questionsI hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.
Hi @DMT1,
Thank you for visiting the Forums from the HP Support! Good day. I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.
You did your little comments and research before you post your question in the forums of HP. Kudos to you for this. You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.
First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?
Some links that might consult to try to resolve the problem:
I hope this helps. I would like to know how this happens. I hope that the problem is solved without
disputes and the unit works very well. I'm always here for you help. Please reach out at any time.
Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.
Take care now and have a wonderful week ahead.
-
CS2 problem reinstalling after the update to windows 10
After the update to Windows 10, I get a message saying that my license file is damaged or something of this nature. I'm going to connect to the Adobe account and use the old version of registry. By putting in the license number, it says it is already in use. I tried to uninstall and install CS2 but get the same result. How can I re-register?
Thank you
Hi tonytiny,
You cannot save Adobe CS2 products as the CS2 products activation server is no longer available. To use a CS2 application, you must uninstall your existing application of CS2.
Once done, please download and install the CS2 products from the link below. You cannot reinstall from your original disks.
Please find the link for more information about the Activation of the server unavailable for CS2 products below...
Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3
Please follow the link below to download the CS2 products. You will also find the serial number as well as the configuration file.
Download Acrobat 7 and CS2 products
Please let us know for any further assistance.
~ UL
-
After having updated to Windows 10. If I try to save a file in TIFF format, it will not save and Photoshop CS6 freezes. This is a known fault and is at - it a cure please?
- Please would the ' Save in the background ' option and check if this helps you in any way. "
- To activate this option, choose Preferences > file management and save in the background check
- If this does not help, try to reset the Photoshop preferences after the bottom of the article:
PS: Restart Photoshop when you make changes in the preferences.
~ Sarika
-
After an update of Window Vista Business, I lost the option of hibernation
After an update of Window Vista Business, I lost the option of hibernation
How can I solve this problem?Thank youHey Joe,
What is the number of the Windows Update installed recently?
I suggest you to follow the steps from the link and check if it helps.
How can I enable hibernation on my Windows Vista computer?
I hope this helps.
-
Photoshop and Illustrator is not opening after the update of Windows 10 anniversary
Hello!
After the update of Windows 10 anniversary, Photoshop and Illustrator can't open. What should I do?
Thank you!
not serious.
You get an error message or Apps do not respond when you try to open.
You can run the System File Checker to see if there are any problems with Windows OS after upgrade files,
https://support.Microsoft.com/en-in/KB/929833
As for the latest CC applications you need to install the latest package updates Visual C++ Re-distributable.
See the link below:
-
Adobe Premiere is freezing and reading lag after 2015 update on Windows 7
Adobe Premiere is freezing and reading lag after 2015 update on Windows 7.
Even if I add a simple title or shorten a clip in a few images, these tiny adjustments can make the software freeze and two windows appear in the preview window.
He will not be reading sometimes 30 seconds every time I do this minor changes.
Photoshop is also very slow when loading.
For the record, I don't use ANY 3rd party plugins.
Overall the new update seems not at all work very well.
How can I reinstall the previous version all CC 2014 please?
I use the software a few hours a day and I can say that previous versions of the products worked well and I never had any real problems in the previous 18 months - the new version is somewhat a mess.
Yes, with a subscription of the cc, you can install and use the cs6, cc, 2014 and 2015 CC cc.
to install cc 2014 open your desktop cc app > apps > find additional applications > previous version > first pro install > cc 2014.
Maybe you are looking for
-
Where can I find the MAC address on this Tablet? It works under windows 8.1. Thank you.
-
How cancel the installation of Win XP after the partition has been implemented
Hello I put my pc in place and came to a point when I need to install the operating system. I went with XP because it's what I had at the time. I did the partition and restarted with a GUI screen pc and starts the installation. I came across some pro
-
I received a message of not enough space on the local disk C. I deleted many files and programs to free up space, but I still receive the message. And local drive D is empty. I am running XP Edition family.
-
MS-DOS prompt says C:/Documents and Settings/Pattie >
There was never any user on my computer named Patti. I have two user accounts on my computer, have never been Patti. So how is my prompt MSDOS keep tell me who? Is somewhere in my system, this username? Is it possible to remove this?
-
HP Deskjet F4180 print photos with a purple hue across
Hi all, I was hoping that someone can help me. Our HP Deskjet F4180 is printing pictures with a purple tint (usually something in, like a coffee table or wood panelling, comes out magenta-y). I tried troubleshooting it myself and it seems there is no