Problems after update 10.4.1.b.0.101
Upgrade to version above this morning and since then my microphone speaker, headphones, music everything has stopped working... Has anyone faced this problem? How can I restore? Solution?
I use Xperia zr and upgrade has completed without any problem
According to the sony support center there is a problem with the motherboard so they replaced my unit brand new :-)
Tags: Sony Software
A few days ago, I decided to update my 2011 T410s by Lenovo
Toolbox. I was looking for solutions to improve the battery life. I have
has chosen to update all 'important' and some option updates
those I thought that could have an impact on the battery life (BIOS update, Intel HD graphics driver, thinkpad power management driver and a few others)
Since I have lived a graphic break several times when I watch videos online such as
thedailyshow.com or youtube.com. The first time a
a message on the graphics driver (or something like that)
has stopped working and has been restored but the next second the
ventilation was repeated, monitor would go black and the
graphics would begin slowly reappear, I'd still get a message
on the graphics driver and the other second monitor would again
black and so on... Now, I only get the message more difficult when it happens from the computer retrieves before leaving black. The only way to break the cycle is to restart
the computer and everything works fine. Until I have watch another video. ! I tried uninstalling the driver HD and reinstalled (both reinstalled as Lenovo and Intel), and it still does not work.
Suggestions? Is someone else had problems after updating?
Please uninstall the display driver, and reinstall.
Also, install the latest player adobe flash.
Please watch the video file online and then check it in.
Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used without any problem after update 2015 cc adobe photoshop...
Just installed 9.4 ACR it works for my RAW files. Camera Raw 9.4 now available
And the following cc 2015 windows updates installed.
Updates Windows Photoshop CC 2015 File download Size Date Notes Update Adobe Photoshop CC 2015.1.2 (64-bit) 352 MB 20/01/2016 16.1.2 release Update Adobe Photoshop CC 2015.1.1 (64-bit) 352 MB 14/12/2015 16.1.1 release Adobe Photoshop CC 2015.1 update (64-bit) 352 MB 30/11/2015 16.1 release Update Adobe Photoshop CC 2015.0.1 (64-bit) 258 MB 03/08/2015 16.0.1 release
I encountered several problems after the update to 31.1.2.
1. I can't send emails from one of my accounts, or it only downloads the messages from this account. When I connect to this account's web e-mail messages are there. When I try to send the mail, I get the message:
The message send failed.
The message could not be sent using SMTP server mail.vista - consulting.hr for some unknown reason. Please check that your SMTP server settings are correct and try again or contact your network administrator.
I have control over the mail server and reflected on the Messaging log and it said:
2 Oct 17:08:37 droplet postfix/smtpd : connect from unknown [xxx.xxx.xxx.xxx]
2 Oct 17:08:37 droplet postfix/smtpd : lost connection after unknown STARTTLS [xxx.xxx.xxx.xxx]
2 Oct 17:08:37 droplet postfix/smtpd : disconnect from unknown [xxx.xxx.xxx.xxx]
When I try to send mail.
2. the update of enigmail and ligntening had stuck somhow. In the Add-ons Manager window, I see the old versions and new (lightning 2.6.3 and 3.3.1 enigmail 1.6 and 1.7.2). However, the new versions has dimmed. Restaring Thunderbrid does not help.
3. all my entries in the missing calendar which is a very big problem for me.
Close Thunderbird and go to your profile folder.
There is a subfolder "extensions".
Find the folder for both the lightning and Enigmail under "extensions" and delete them.
I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.
After updating the BIOS, I have now two problems:
1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]
2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.
Basically, I want to get everything working again as it should, but cannot find any information on these issues.
After further review, it appears that the update of the BIOS is not the cause of the problems.
Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.
After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.
Your Wifi stop working on the iPhone 5 after update of iOS 9.3?
My WiFi is fine
To solve problems
Settings - general - reset - reset the network settings
(You have to re entry will save WiFi password)
I've recently updated my product to 8.1 of Windows and even if I have material for a sound SRS surround, I can't find the software patches necessary to return my sound quality to its original levels of Dolby. I have already installed the IDT audio drivers available in support of the Web site forums always the his qualityy is very poor.
In addition, after installation of the Qualcomm Atheros Wireless card driver from the support forum, my light on the adapter does not turn Orange and stays blue all the time.
Kindly help me to solve these problems.
Hi @Yuvraj_Gupta ,
Welcome to the HP support community. I saw your post about the problems after the upgrade to Windows 8.1. You encounter some problems because there is no driver Windows 8.1 to your model, only Windows 7 and 8. This Driver de Audio IDT high-definition is the most recent that I can find, but I can't guarantee that it will work.
For wireless light trying to install this Driver HP wireless button. Once installed, you should be able to switch it off and on again.
Last night I updated to windows 8.1 8 and have had problems since. I have a 64 bit HP ENVY #C2L94UA # ABL m6 after update, I tried to play Devil may Cry game that worked perfectly under 8.0 and then he comes to start charging the computer turned off. I did research online and exhaustion possibilities why including the abolition of the xbox drivers and reinstall the game but nothing doesn't always turns off the computer. I then opened AMD vision, to try to adjust the settings, I noticed I was now just as 3 options of things to settle. I could just adjust power consumption on the processor dependimng on if the computer was plugged in or not. Went a whole optiuon to adjust graphix and all the things to do it graphically disappeared. Then I redownloaded the catalyst drivers and tried to reinstal. Once the computer off again. Every time I have try and update the graphics it stops. Site Web HP says that all my drivers are up to date. Then, I rebooted the computer by pressing ESC and tried to do a system refresh. He failed. All the options of wiping my computer clean and refreshing failed. I said that it lacked a partion for one of them. Even system restore will not work. It shows my Ati video card in device manager. Please help me ty
OK I solved my problems that I did start the computer in safe mode and then I uninstalled my cards video from Device Manager. I then restarted the computer and installed the version of catalyst that was said to work with 8.1 and switchable graphics cards. I have restsrted and have more no video issues at all.
Is anyone having problems with their wifi connection after updating to the pacifier. Mine was working fine before the update. A move 35mbps ookla speed test download when connected to my home fibre broadband before the update, but now even hit 1mbps after update. Keep buffering when watching videos. Home broadband Checked speed on pc and getting 34mbps so it's not my Internet problem. Would appreciate ideas. Thanks.Using xperia D6603 z3.
That's what I'll do, fix the phone with PCC
Bridge (for Mac)
Alternatives on how to backup Xperias
and uninstall any antivirus > check again.
I had some problems with my new laptop so I decided to try the «Refresh your PC» function Doing so brought on a slew of new problems which I had no chance to solve on my own. I hope someone knows what to do with this mess.
After "refreshing" to my PC, my laptop wouldn't let me:
Install anything (downloads are OK, though)
Programs open (with the exception of Internet Explorer)
Open C: /.
Open the laptop settings
Solve problems ("an error has occurred during troubleshooting.")
It became obvious to me that the majority of these problems were because the updating of Windows me rid of my administrative privileges.
I tried to solve this problem with every idea that I had and every suggestion I could find online. The problem is that my phone won't allow me to do anything to capture administrative privileges.
Here are the solutions I tried:
'Change the Type of account' in the user accounts: parameters show that I am already administrator. The 'Standard' option is greyed out. Nothing to do here.
Using a command prompt: everything I try, I get the "Network Error" result... "Windows cannot access to ' if I get" net user administrator / Active: Yes "I received the reply"the system 5 error has occurred. Access is denied. "I can only assume this error occurs because I'm not an administrator. If I try to do "sfc/scannow" it says "You must be an administrator." However it won't let me run cmd as administrator.
Exchange User Account Control: the bar is set on "notify me only when...". ». I can drag down to "Never notify", but when I try to click on 'OK' will not just pass by. I could click OK all day and nothing will happen. No error message.
Create a new user: hit this button head to PC settings, which does not, as previously stated.
Clean boot: Msconfig will not open, I get the error message "network error". Windows cannot access.
Switch to the Microsoft account: 'Users' directs 'PC settings", which is an application that does not open.
CHKDSK: whatever it is, I have no idea, but it does not open.
If I try to "Run as Administrator" on any program, it simply doesn't. No error message.
I reached the end of my rope after trying several solutions more that hasn't worked and tried to do a system restore. System Restore does not open. I get the error message "System Restore could not start." I would try to solve the problems, but as I said troubleshooting will not, work almost everything also, runs to the PC settings application, which does not open.
None of these problems existed before I did the update of Windows, so I can only assume what caused their - which is a little disconcerting.
Any ideas on what to do?
I had this problem after that refreshing of my pc, if yours is the same (if it could even be your best solution) you will need to make a new account
Windows + x
go to "Control Panel".
go to "user accounts and family safety."
Press 'user account '.
Press 'manage other accounts '.
In light blue shades near the bottom, it says "add a new user".
Follow all instructions after that to make your new account
Sorry I couldn't be more helpful. If all else fails, it's the only way I know how to deal with it
I'll have a lot of problems after the update to 2015.3. It is a project which worked perfectly well, a few days ago on 2015.2 (or whatever the previous version was). Now, audio is de-energized, it does not play smoothly, and everything hangs after a few minutes - I can't move the timeline, it does not meet the up/down keys to navigate to the previous/next item, it is totally insensitive. Everything worked well until the update to 2015.3.
I'm running Windows 7 Pro on a 6-core i7 Extreme with 24 GB of RAM and a Quadro 4000 (v354.35). I have a 500GB SSD for Windows and the creative cloud, 2 TB RAID 0 HDs for swap/cache/work/etc., 1 TB HD for project files, 2GB RAID 0 video source HDs, 1 GB HD for video output (5 logical volumes, 7 physical disks). This system has flown before installing 2015.3.
Published by: Kevin Monahan
Reason: more concise title
Please mention the operating system you are using?
For Windows try the step below.
Please go to Edit Menu of Premiere Pro > Preferences > Media and uncheck the option "Enable accelerated h.264 decoding Intel."
Note: It is necessary for the Windows Machines
Once done restart Premiere Pro and check the performance.
Is anyone else having problems with the tools of pathfinder after updating to the latest verstion of CC? I can't join, split or cut paths with generally predictable results. Any advice? Is there a way to disable the living corners?
Problem solved... (Pilot error). I was working on a work plan that has been way too small 145px x 145px and recovered a few funky alignment problems after dividing paths. I brought everything back to a size of reasonable and everything work fine. Too many hours behind the screen today.
GO SONY XPERIA
After update of Jelly bean bad camera 5mp resolution and found him jamming
In other words, the camera image in better than Jelly Bean ICS is this normal?
What do you mean by "[.]"and found him jamming? '"
Can you post some pics of example before and after that you updated?
What are your thoughts on this forum? Let us know by making this short film survey.
After update BB Bold 9000 to V5.00.681
Platform 52.064, there are no Applications available in the application launcher (DM Version 220.127.116.11 on Windows 7). The Smartphone works very well but unfortunately Memopad and ToDo is missing. As part of the Planer DM, these two applications are marked as not installed. Please help me how to install these applications. In the application launcher, there is ONLY "Blackberry App World"
Try the following. Download the operating system of your carrier's Web site and install it on your computer. You can do this by selecting your operator from the list here: http://us.blackberry.com/support/downloads/download_sites.jsp
Once you've done that, see if necessary applications will appear in the desktop software. If this isn't the case, then there is another method which should work. Just to be sure, make sure you back up your first device using Desktop software first.
On your computer, go to C:\Program Files (x 86) \Common Files\Research In Motion\Apploader and run the Loader.exe file. (Note: on computers 32 bit, should no (x 86) in the Program Files folder because the Program Files folder).
Once you start the Loader.exe file, simply follow the steps until you get to the point where you can select the applications. Now you should see the option to check the Documents To Go, notebook and any other software that has not been installed. Once you have all the apps you want enabled, simply press next (note: leave everything that is checked as checked, unless you want to uninstall). This should now load the applications on your BlackBerry while keeping the rest of your BlackBerry file system.
I hope this info helps!
I've just updated today. Subsequently, I made a minor change to an existing Muse site, and it will not be rendered in Chrome. It is agreed so far in IE, Firefox and Safari, but very slow to load. The two error Windows Chrome as follows:
"Object has no method"Muse brochure"[object Object]" and "Spry is undefined.
The site is blurred and an album and slideshow are missing. Maybe more, but it is difficult to distinguish what is there and what isn't.
I use export HTML with Amazon Cloudfront. Is there any solution for this?
You must re - download ALL the files and folders exported from 2.0 the first time you download after update or use the new built-in FTP download.
The new built-in FTP download it will automatically and then it will automatically generate and download only the changed files. Try manually assumes that the files have changed and need to be downloaded is very questionable.
Maybe you are looking for
I have a print cartridge error display. I replaced both cartridges and still the error appears. I have unplugged and replugged, thus taking the cartridges on and putting them back. I had this all-in-one for about 6 years. Someone help please?
The unexpected happened by updating my BIOS, we lost the power. Once the power came back, my machine was bricked. I get the error of Checksum BIOS's Boot Blocker I did some research and found that I could re-Flash my BIOS so I could boot to a CD or
Hi, I have windows Vista 32 bit professional ed, I have service pack 1 installed and updated my video card driver and my DX 10 but in the company of heroes, there are many graphic bugs such as objects being a colored blob or see hollow of the floor a
Hi, just bought a new computer laptop inspiron 15r with windows 8 and I am trying to install Itunes and it again me itunes cannot be downloaded. I am an administrator on my computer. Help! Thank you.
Using a storm, I noticed that the fields for the duration of the appointment and the time of an alarm have a field that we will you specify options on a go. I'm looking to set up an identical to the duration of the appointment with the selection fiel