Problems after update BIOS on Satellite Pro 4600

There is a problem with the computer toshiba laptop. its the fact do not install any windows OS after the Installer starts running xp there is an error message that says that the drivers of setupdd.sys could not be loaded (error code 14)

I tried with different CDs with the same error, so I tried the procedure of the ghost image, but all in vain after reboot it is with an error that requires a kernel dll could not be found that I even used a cool ghost image but the same error.

In fact, I upgraded the bios to a worm recent 2.60 it was beautiful, he started twice and has been used for several hours. the update was suuccesful up and running. It all started when we placed a kingston flash drive in the USB after it was working very well we copied a simple document on drive d, nothing else, it worked for half an hour. After I stopped, and then it was late at night when I started the system fine.i was listening to a song after that, he displayed the error messge system32 driver pci.sys damaged or missed.

Then I tried everything I knew in windows xp to boot with xp cd and... etc I also formatted the hard drive to try to win98 installation gave an error also, external error to msdos, I think it's the update of the bios that is problem because windows 2000 Professional installation gave a very specific error. BIOS not fully ACPI compatible after pressing F7 in the installer of windows xp the feature ACPI went silent and requested installation good, but during the formatting the drive but it stopped with an error that the disc hard cannot be formatted.

It's a week now. you have the previous bios file with you maybe which would solve the problem or other.
Please guide me. I went on toshibas website 25 - 30 times but they do not have the previous bios except the last ver2.60 file

Hi Usman

The problem is that you can't roll back BIOS to the previous version. Just service partner chartered Toshiba for this special tool.

Check it please this document. I have gift? t know if this can help, but perhaps you can better understand the problem http://support.microsoft.com/?kbid=330181

Good luck!

Tags: Toshiba

Similar Questions

  • Updating BIOS for Satellite Pro 4600

    Hello everyone,

    I'm trying to update the bios and I followed the instructions, but I don't know what the problem is.

    1 - download the files
    2 - unzip them filed in a non-bootable disk is.
    3 - restart the computer with the disk in.
    4 - press f12 during startup.
    5 - nothing happened, the system asks me remove the disk, but nothing is updated.

    Thanks for your help.

    Hello

    I found this statement to update the Toshiba BIOS for this series of portable:
    1 extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding the type of disk to use).
    2. make sure that the laptop is plugged into the sector.
    3. turn off the laptop.
    4. turn on the laptop with the F12 key. Press and hold until a short beep can be heard.
    5. the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward"will appear.
    6. place the floppy disk containing the BIOS upgrade in the floppy drive and press a key. FDD access will begin.
    7. When prompted by the message: "Please push the RESET switch (or turn the AC OFF power off / WE) to restart" remove the disk and press the RESET switch (if available) or turn the system off and turn it on again to restart the laptop.

    But note; Update the BIOS is always risky! If your laptop works ok, then update the BIOS is not really necessary!

    Greetings

  • Problem after update bios on Satellite L505-144

    Hi all

    New here, but I know I'll be in the right place.

    I recently installed some updates, such as suggested by temppro. Now whenever my compy starts in Windows 7 64 bit, I get the following message.

    RunDLL
    There was a problem starting C:\Users\Ems and Swift\AppData\Local\prtwst.dll

    The specified module could not be found.

    I post the picture of it, but I don't know how to paste the picture.

    If someone could give me an idea what to do, I'd be really grateful the help... I tried to re - install the bios and by removing other updates... But still this msg appears...

    Thanks in advance

    Paul

    Post edited by: kochney

    just a quick note, everything seems to work fine, just this error msg, which made my nut in :D

    Hello

    Seems that the app is loading at the beginning that creates this message.
    You should check the msconfing (in RUN type msconfig and go to the Startup tab)
    There, you can check what applications are mentioned.

    You can also try to clean the registry with CCleaner. This tool is free and scans the registry and removes garbage from registry

  • How to access the BIOS on Satellite Pro 4600 settings?

    Guys,

    I received a Satellite Pro 4600, unfortunately this laptop has 2 and a half proceeding on this issue. The first is MS2000, then XP then an incomplete installation of XP. When I start the laptop, it asks which OS I want to use. I have a legal copy of XP that I bought and I want to reformat the computer laptop and put on a new install of XP, the problem is how to enter the BIOS to change the settings to boot to a CD?

    Any help is greatly appreciated.

    Steve

    Hello

    First of all you n t need to access the BIOS to boot from the CD.
    You can simply press the F12 key immediately after the laptop has been powered.
    It would show the available boot options.

    Alternatively, you can press the C button that would automatically allow the CD/DVD drive as the boot source.

  • Touchpad no longer works after update BIOS on Satellite A500-1GL

    Hello world

    I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

    Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
    After that Windows 7 (x 64) started the touchpad no longer works...

    I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

    I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
    But unfortunately it still doesn't.

    Now, I'm out of ideas, can anyone help?
    Is there a chance to get the older version of BIOS to downgrade it?

    Thanks in advance ;)

    Hello

    It seems strange that after update Bios touchpad no longer works.

    > Is there a chance to get the older version of BIOS to downgrade it?

    To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
    The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
    Advice for the future; Do not touch the running system.

    Good luck!

  • Updating BIOS for Satellite Pro S300

    Hello

    An update of the BIOS for Satellite Pro S300 series, even if there is no change log so there not sure it will set.

    Down here at Toshiba

    Concerning

    Phil

    Hello!

    Thanks for this info :)

    I have never seen anyone from Toshiba but maybe they only read here.
    I don't know, sorry.

    Good bye

  • HARD drive click after update Bios on Satellite A100

    Hello.
    I just did a bios update for my Satellite A100 PSAA9, and after that I started to hear a few clicks on the hard drive, from time to time. They appear very often, but I would like to know why they started!

    The bios update was published in 26/11/2007.
    Does anyone have the same problem?

    Thank you.

    I put t think it has something to do with the BIOS update.
    I put t don't know how old you HDD is but maybe that click concern only the HARD drive hardware problem

    There are several times in my HARD disk created similar clique and sounds but it s runs great
    I didn't noticed any hardware problem however, we cannot exclude a hardware problem and therefore, you should back up important data to prevent the files from damage.

    Best regards

  • Updated BIOS for Satellite Pro U200?

    Hello

    does anyone have any experience with BIOS version 1.3 for Satellite Pro U200? I've upgraded to this version of the BIOS and have had several problems since then - shortened wireless keyboard does not and display the overflowing of installation brightness to name two.

    In addition, as I noticed last week, upgrading the BIOS can not be downloaded more and there is no alternative - just says download page don't: "no BIOS upgrade for this product! Is there anyone that has 1.2 BIOS so that I can try to downgrade to this version?

    What is your experience with BIOS 1.3?

    Hello

    It s really strange?  :|
    I checked the BIOS for Satellite U200 and Satellite Pro U200 download section, but I put t found any BIOS download at this time.

    A few years ago the authorized service provider has installed an older version of the BIOS on my Tecra friends unit.
    I guess that he should be able to do it on your Satellite Pro U200.
    The other possibility is to wait for a newer version of the BIOS.

  • Update BIOS on Satellite Pro 2100

    Hello

    I have a Satellite Pro 2100 (model #: PS210E-0053R-EN) and recently bought two 256 sticks of RAM for it, which according to the manufacturer, are compatible. They do not work, and I have I'll return them, but before the company was asked to take certain measures, i.e. to retest them and also update the Bios. I have never updated a BIOS before and am a little worried about something bad, or choose the wrong update.

    No one knows who is right on the section of the site? I know there's a Satellite Pro 2100, but which is compatible with all the models of this laptop?

    Thank you.

    Hello

    Satellite Pro 2100 comes with two different processors (cel or PIV) but the model number is the same (PS210E). This means that you can use the update of the BIOS for both models.

    I recommend you do traditional BIOS update using the floppy drive. As described on the page of the Toshiba BIOS update, it is very important that you refer to the Description of the Toshiba BIOS update before you continue.

  • Need disk to update BIOS for Satellite Pro A40

    Hi all

    I need to have a version update diskette bios for my model PSA45E Satellite Pro A40.

    Files available for download here are too big to put on a floppy if does anyone know where I can get them from?

    Any help is appreciated!

    aypyb

    Hello

    The update of the BIOS that is published on the European driver Toshiba page is based on windows update BIOS!
    It s non-traditional BIOS that could be updated by using the FDD drive!
    Don t mix it!

    Update the BIOS-based on winning THAN any windows operating system!

    Welcome them

  • XP does not start after update BIOS on Satellite L

    I've just updated my BIOS 2.10 to 2.20 to try to overcome a problem of overheating with Linux.
    The reboot of the XP laptop will not start. I get the XP screen for a few seconds and then the blue screen of death flashes until restarting the laptop before. The blue screen is so fast, that it's not finished writing the text - I can't see all the numbers to check the error.

    If I choose Linux Mint of my GRUB screen, the laptop starts properly. I also see the Windows partitions. I tried to boot from a XP disc to run CHKDSK, but I go to the step where it says it inspects the configuration of my then hangs on a black screen / white and there it is.

    Any ideas? Is it possible to roll back the BIOS?

    Hello

    > Is it possible to roll back the BIOS?

    Yes, you can downgrade (rollback) If you made a backup.

    Can enter you the Bios and check if the compatible mode (after updating the Bios, it might put AHCI default)?

  • Problems of updating BIOS on Satellite L40 - 15G

    Good afternoon.

    I have Toshiba Satellite L40 - 15G and I want to put 4 GB of ram (2 x 2).
    It works with 3 GB but with 4 GB it just does not start - gives me a blue screen.

    I read on the internet and discovered that I have to update my BIOS (my version curent is 1.60).
    I have vista 32 bit. I also tried to do the update via the site of toshiba, but without success.
    I am running the .exe file, but when I restart the computer I have the same version.

    What should I do?

    In the hope of a response.
    Pedro

    Hello

    I think you are using an incorrect BIOS.
    Satellite L40 - 15 G seems to belong to the series of PSL48E

    Check again!

    Toshiba Europe page provides a BIOS 2, 00-VICTORY for Vista and WIN-5, 50 for Win XP

    Regarding the upgrade of memory:
    I don't know if your laptop would be m supports 4 GB of RAM. Is that there are different models of L40 and some models supports only 2 GB of RAM!

    Your L40 - 15 G seems to use the Mobile Intel GL960 Express Chipset...
    Check out the details on the Intel page which RAM max can be managed by the Intel GL960 Express Chipset.

  • Need update BIOS for Satellite Pro M30

    I use a Satellite Pro PSM35E, who owns a Phoenix BIOS v1.70. I want to upgrade but on Toshiba any site cannot find a

    Help, please

    Hello

    Satellite Pro M30 laptop belongs to the series of PSM35E.
    I checked the page European driver of Toshiba and found the BIOS.

    You must choose * ARCHIVE-> Satellite Pro archive-> Satellite Pro M-> Satellite Pro M30-> BIOS *.

    You will find the necessary BIOS

    Good bye

  • Password BIOS after update BIOS on Satellite A210-131

    I just bought this laptop and update its BIOS. After update done computer turns off automatically. Then I turn them on, it ask password, I've never given an any of them in the BIOS.
    What is the password?

    Hello Jhonson

    I don't know what the password is, but please call the service provider allowed in your country, and they will help you. They can remove the password and you can use your laptop model as before.

  • After update BIOS my Satellite A200-h-13 is slower

    My laptop's slower since I updated the BIOS? I bought this phone 1.5 months ago and now it takes 7 minutes to get started! Internet Explorer takes 50 seconds to start...

    I installed an update that is not compatible with my laptop? What should I do?

    I updated the BIOS on Satellite A200 (PSAE0) to version 5.20 and there is no change at all. Maybe you should back up all your important data and make the clean OS install.

    I know it sounds stupid, but you have to understand that no one here do know your own settings of operating system and what can be the reason for the slow start.

Maybe you are looking for

  • Word file in use error

    Need help to open a corrupted word file.Your help is very appreciated.error: "the xxxx.docx of office open XML file cannot be opened because there are problems with content"Details:EQUAL expectedLocation: part: / Word/document.xml, line: 2, column: 4

  • HP Pavilion 15-p254np: graphics card for HP Pavilion p254np 15 drivers (win 10)

    The comutable graphics that are a big part of HP laptops, if this feature does not then the graphics capabilities of the computer go allmost completely in the sewers. I've recently updated my computer to win 10, completely unaware of the lack of grap

  • Skype will not sign

    Hello Customer Service, I've been Tryin ' to connect to Skype from my computer (win10) I received the same answer: "Sorry we couldn't not coonect" - Please check your internet connection and try again. So I've updated to Skype - uninstalled it and re

  • What happened to firmly to empty in the Finder?

    What happened to good emptying the trash in the Finder menu bar? Used to have, now, in El Capitan, I do not have. Do I have to "Rs" in Terminal now, in order to get this feature?

  • My previous internet provider set a VPN on my IE8. They have now failed and I have to delete.

    I am currently connected to my new provider and when I go to delete it it tells me that this is impossible because it is in use. It is not in use?  Any suggestions?  I have even closed all my IE Windows and went at it through Control Panel/Network an