Problems installing HP LaserJet P1102w

Similar Questions

• HP Jet P1102w Laser: cannot install HP Laserjet P1102w correctly (USB detects no not my printer)

  Dear Sir.

  Recently I bought a new HP Laserjet P1102w, my printer is on and also attached with USB, but when I go to install the Geniune CD with bundled software, the error came and procedure do not fill correctly, what should I do? I want to use it with wireless printing, but how can I install it correctly? Printer showing also the number real name and model on PC... What is c?

  

  Hi @NaveedShaikh,

  I see by your post that the printer is not detected. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Thanks for providing the excellent screenshots. The CD is used for different models, the P1100 is your printer series.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer.

  This can also occur when the printer is already recognized as the USB connection and windows does not yet detect.

  Remove the USB cable plugged in, remove the printer in the devices and printers (if the list) and the Device Manager.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that the connections in Device Manager for the entries of the printer, under Bus USB controllers are looking for USB, Mass Storage Device print media or anything with a yellow exclamation point or an unknown device. Right click and uninstall the device. Then reconnect the USB cable and it must be detectable again.

  If you're still having problems, unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation.

  If there is anything else I can help you, let me know. Thank you.

• Printer is not found during wireless install HP Laserjet P1102w Mac OS X10.6.8

  HP Laserjet P1102w worked very well connected my device to the airport.  I uninstalled the printer software by mistake.  Downloaded the latest driver to reinstall.  "Resettlement"successfully"complete but the printer is not found on the ' printer & Fax" system preferences or if I invite with "Add printer".  The HP Firmware Upgrade utility also cannot find my printer via the network connection, gives me the error "device is inaccessible."  The network address entered is not valid or your device is not supported or is not available. If please correct the problem and try again. "There is no problem with my network or surf the internet.

  All advice is appreciated.

  Thank you for this answer step by step in detail.  It was extremely useful.  Printer is connected to the airport and all the computers on the network can print to it.   Hurrah.

• problem installing hp laserjet 3390 all-in-one

  I am downloading the driver hp laserjet 3390 for windows vista.

  However during the installation process, it tries to find the printer and couldn't.

  So I have to cancel

  Please notify. Thank you

  Hi sunicok,

  I am pleased to hear that the problem has been resolved. Have a wonderful day.

• Problem installing HP LaserJet P1005

  Hi all

  I have had to install the software for my second pc, but has encountered a problem which I was unable to complete the installation. Everything was fine until that part when I was prompted to plug in the USB cable and turn on the printer. After I did it, the only option available for me to go forward is to 'return' ('Cancel' option is gray).

  Can someone please help?

  Thanks in advance!

  I had the same problem with my PC to 8 window when installing printer HP Laser Jet P1007. I was just at the link below and it worked fine.

  http://support.HP.com/us-en/document/c03646498

  Kind regards

  Raju Mani.

• Problems installing driver LaserJet 1536

  I have a new LaserJet 1536. I'm running Vista 64 and the computer is connected to the printer with a usb port, no network.

  (1) plug and play installs the driver of the upd very well, but then I can't scan, it will print. Even using the Windows Photo Viewer he sees not a scanner.

  (2) I tried to install the driver full, disk and the hp site. I get a return code 1603 and the installation fails. I deleted the driver upd based on a previous post, then tried to install it, but there is also.

  (3) I ran the hp print and scan doctor and he said that he could not help.

  (4) I tried to install a 3rd party scanning program, but it cannot find the scanner.

  (5) at - it another brand which would be more compatible? It seems crazy to waste all this time, installation of a new product.

  Thank you

  Hi pjbb,

  Update the firmware from the link below and follow the document Fatal error 1603 turn off all your startup programs. Follow the steps below to uninstall and reinstall the printer.

  Firmware update

  1. Fatal error ' error 1603
  2. Open Control Panel
  3. Click on uninstall a program
  4. Uninstall Officejet 8600 from the list
  5. Restart your computer
  6. Download and install the latest version of Adobe flash player

  Adobe Flash update

  1. Download the drivers and full software functionality, and then reinstall the printer.

  Driver and software of full functionality

  I would like to know what is happening?

  For more information, see HP 1536dnf unrecoverable Setup error .

• Problem HP Laserjet P1102w

  Hello

  After several attempts and after installing the new firmware I finally managed to install the Laserjet P1102w on my Mac OS: Lion).

  However, I still face a major problem in wireless printing: the printer stops printing after a while. I installed the printer via Hello, characterized by a unique SSID and a fixed IP, auto power off, set the I/O Timeout maximum. The printer is accessible via the Web interface and prints documents via ePrint mobile printing. Even if the LED lights in a constant blue, the printer firm impression.

  Is there a major bug in the firmware or the printer is not compatible with OS 10.7.2?

  Chris

  I found the solution... never by HP printers if you own a mac!

• HP Laserjet P1102w: HP Laserjet P1102w not recognized in Windows 8.0; driver needed

  Trying to install HP Laserjet P1102w on Dell desktop running Windows 8.0. The installer always stops and says to connect the printer by USB, but it is already connected and turned on. Had to remove peripheral devices after he worked temporarily, but now I can't find the driver - have the disc. How to recognize the driver on disk file?

  Hi @artjourneyer,

  I see that you have problems get printer recognised and you will need to find the file on the CD for the printer. I will definitely do my best to help you.

  The file would be .inf from the CD.

  I would say to download and use the latest drivers for Windows 8. HP LaserJet Full Feature software and driver.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. You may need to try another USB cable.

  Try and print a self-test on the printer hardware to see if it is a hardware problem. If the printer is not in a ready state, the computer does not recognize it. Printing a Configuration Page. Select the method two.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect. Remove the USB cable plugged in, remove the printer from the Device Manager.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  You set up the printer on the wireless network?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Cannot turn off Double-sided printing on LaserJet P1102w!

  So I just installed this LaserJet P1102w and I absolutely cannot understand how to disable two-sided printing. It's really annoying because even when I try to print only a one page document he sucks a blank page, does not print anything on it and then told me to return the document to print the other side of this one. Sometimes it prints also a Hewlett-Packard test page or something that wastes the toner. I have gone through with a fine tooth comb printing preferences and cannot find a way to turn it off. There is nothing in the user guide on how to disable it. Scan doctor said there is nothing wrong with the printer. I tried to download some sort of aid to this site and is not compatible with this operating system I guess. I've lost hours trying to figure this out and there is no way to call and speak to a human, I guess. I want it out. Can someone please help me and tell me how to disable? It's wasting toner, my time and it's extremely frustrating. Thanks in advance for any help.

  Check that the Mode of Duplex in device settings setting in properties P1102w is OFF.

• HP LaserJet P1102w: Help with printer install

  HP LaserJet P1102w chip installed on the new windows 7 PC as a USB device when I am logged in it.   How do I make a printer so I can set as the default printer?  On the control panel / devices and printers, she appears as a device, not a printer.

  Solved the problem.  Re-directed HP smart install and the drivers have been loaded.

• LaserJet P1102w, why not install it via the USB port on a second system to dual boot Windows XP/Windows XP?

  A seriously paralyzed malware on my laptop Dell Inspiron 1318 running Windows XP Professional SP3 with 3 GB of memory. Some key files have been deleted, and I can't open all .lnk files. After some research, my solution was to start from a clean format. However, I have some programs on the old system that I really need and impossible to reinstall on a new system. So, I chose to install a new WinXP as a dual boot on a separate partition (I have also a third partition that I use for user files); keep the old system for when I really need.

  After installing the new WinXP, the detector material caused my LaserJet P1102W printer install pop up box. I was busy to install other drivers at the time so I canceled the installation of the printer later. When I came back to him, he went for the bulk of the fine saves but then abruptly stopped, saying: "the printer installation failed. On the HP site, I went through all the HP printer Diagnostics steps without good results.

  I really want to get this printer working on my new system. What can I do?

  No problem. Since you are the author of the post, you should see a black button with "Accept as Solution" next to the reply button. If you don't see it, make sure that you are connected and try again. If still can't get it, you can click the link inappropriate content report and ask the moderators to mark the solution for you. Hope that helps.

• HP Laserjet P1102W - cannot install on Windows 7 64 bit

  Hello

  I'm unable to install the software for my laserjet p1102w. I tried the install CD, USB install and install downloadable. I get the error message is below. I ran through almost every tutorial tech support on the HP Web site as well as a few websites of third 3rd, and I'm about to throw this printer out the window. A few things about my setup: the printer is already connected to the network by other computers (Vista, who had no problem with installation). I am running Windows 7 64-bit on an Acer Aspire 5745 G.

  

  Hi smcconn5,

  There are a few other things that we can try to get the printer completely installed and operational.

  Unplug the USB cable.

  Uninstall the software from the CD.

  Go to start, computer, right click on the CD drive and select open, and then double-click on uninstall.

  Restart the computer.

  Then go back to start, computer, right click on the CD drive and select open, then right click on the installer and select run as administrator.

  I hope it will work.

  Another that you can try is to create a new user account with full Admin rights and try to reinstall the printer. How to create a new user account in Windows 7

  If you still have questions then I would contact Microsoft to see if they can help with this error to the administrator.

  Let me know how make you out.

• HP Laserjet pro P1102: problem installing printer driver

  Dear Consultant,
  I just installed my printer during the first time and used firmly for a few days... Today I installed windows 8.1 in my pc for some reason.

  But the problem is that when I install my printer driver, it gets installed forever. I tried several times but each time I wait at least 3/4 hours and it ends.

  HP Smart install feature is not displayed. So dear pls give me a solution, I need... Thank you in advance.

  Hi @Alid,

  Welcome to the HP Forums!

  I noticed that you cannot install your range of printers HP Laserjet p1102w on Windows 8.1, and I'm happy to help you!

  How is the printer connected? Wireless, or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope hear from you soon!

• Problem with the HP Laserjet p1102w printer

  Hello

  I have the problem that my printer HP LaserJet p1102w (wireless) still print on the same page, no matter what I send to print. Curretly I can't print at all because every time when I turn on the printer starts infinitely print the same page...  I tried to reinstall the drivers, but it did not help.

  How can I solve this problem? Can I do hard reset somehow?

  Thanks in advance for any help with this problem!

  You don't mention whether or not you have recently installed your printer on a network, but this is a HP document that answers your question, once the product is installed on a network of troubleshooting.  Please let me know if it helps.

  Product print permanently the same print job

  Tobindo

  A representative from HP