Problems installing OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2
Hello Experts,
We install OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2. He was installing (install the business - create a new BI system) smoothly, but in the last configuration Page progression at 27%, he was stuck. In accordance with the recommendation of oracle.
It is a problem with WebLogic Server installation on Windows 2012 R2. That is documented in the unpublished bug 16844206 WLST IMPOSSIBLE GET ENV ON WINDOWS SERVER 12 WITH ENV MINIMAL
MDG action plan-
Install Java 1.7.
Installation of WebLogic Server 10.3.6.
Patch WebLogic Server with Patch 16844206 .
Perform a software installation of OBIEE 11.1.1.9.0.
Configure OBIEE
Following the same thing we did it-
(a) installed weblogic 10.3.6
(b) Dowbloaded the patch and ran GUI and command line.
1. When was held from the GUI
Downloaded Patch_16844206. copied the content of this file zip, except the file Readme in your cache directory SmartUpdate (MW_HOME/utils/bsu/default cache_dir). Ran the bsu.cmd file located in the folder WM_HOME/Middleware/utils/bsu to open the Smart Update utility Oracle - and then 'downloaded Patches' table ffound Patch Id SRSV Bug 16844206 and then clicked on apply.
However after doing a "running Validation" popup appears and he is blocked for 90 minutes at this same position. (see screenshot)
2. When ran from command line-
D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3-patch_download_dir = D:\app\Oracle\Middleware\utils\bsu\cache_dir-statut = downloaded - discovers - verbose
Exception in thread "Main Thread" means
D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3 - patchlist = 23698-verbose - install
Exception in thread "Main Thread" means
Any solution?
Thank you very much
Benoit
Hi all
According to Oracle advises has resolved it as follows.
It is a failure with OutOfMemory. Increase the memory allocated for the process of the bsu. Change the following line in bsu.cmd
MEM_ARGS =-Xms256m-Xmx512m set
TO
Set MEM_ARGS =-Xms1024m-Xmx1024m
Basically, you will need to open bsu.cmd in Notepad, and then change the setting above. And then again run. And it will work.
Thank you very much
Benoit
Tags: Business Intelligence
Similar Questions
-
Install OBIEE11.1.1.9.0 on Windows Server 2012 SP2
Hello Experts,
I try to install OBIEE11.1.1.9.0 on Windows Server 2012 SP2. Asked me to do only install S/W Installation company wasn't (Doc ID 2027617.1).
The solution was-
There is a work around that is to implement a software installation and follow the instructions of section 4.2.5 - installation Oracle Business Intelligence 11 g with your own Java Development Kit (JDK) - the Guide of installing Oracle® Fusion Middleware Oracle Business Intelligence, where you need to patch Weblogic once it has been installed:
- Install Java 1.7.
- Installation of WebLogic Server 10.3.6.
- WebLogic Server patch with Patch 16844206.
- Perform a software installation of OBIEE 11.1.1.9.0.
- Configure OBIEE.
This is why I did the following-
1 installed jdk1.7 (jdk-7u80-windows - x 64)
2 installed RCU 11.1.1.9.0 (rcuHome\BIN\rcu.bat)
3. then ran wls1036_generic.jar
C:\Program Files\Java\jdk1.7.0_80\bin > java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar
Cannot create the temporary extraction directory in the default location.
I get the above error message. Attaching screenshot. http://www.use.com/FpC0P
Can you please help?
Thank you
Benoit
Just to update, finally ran wls1036_generic.jar. Problem was probably related to the virtual machine.
We were in-
C:\Java\jdk1.7.0_80\bin>Java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar
Error - a
Cannot create the temporary extraction directory in the default location.
The temporary extraction directory is the Windows temporary folder. The location is-
Folder - %USERPROFILE%\AppData\Local\Temp where %UserProfile% - c\:users\ [acctname]
But when you run start > run > %Temp%, I see.
C:\Users\ccbgso\AppData\Local\Temp\2--et error was a drive is not accessible.
And \2 was the problem, because there is not C:\Users\ccbgso\AppData\Local\Temp\2.
To correct this error, we did it-
Start > run > Regedit > hkey_current_user > volatile environment
And found 2 below.
Chosen the 2, then the two TEMP & TMP sought in the right pane.
the values were - C:\Users\ccbgso\AppData\Local\Temp\2
Right-click each & click on modify, remove the \2
Clicekd on ok.
Disconnected and re connected.
And then ran
C:\Java\jdk1.7.0_80\bin>Java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar
This time, he began the extraction and 'Install Oracle - Weblogic 10.3.6.0' Welcome screen appears.
Thank you best regards &,.
Benoit
-
Error installing 32 bit application in Windows Server 2012 R2 Datacenter edition
Hi all
I have a software that worked very well in a 32-bit of Windows Server 2008, I installed the same software in a 64-bit Windows server 2012 R2.
I get an "error 48 error loading the dll" error when I run.
I tried to register the dll through command regsvr32. I get an error "dll was loaded, but the DllRegisterServer entry point was not found."
I checked the dependence of the dll with other files you use Depends.exe
I tried to copy the dll in the other place, but none of them worked.
I still get the same error when I run the application.
Please help us with this if you know the solution.
Forgive me if this isn't the correct phase and guide me to the correct page.
Thanks in advance.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments
Hi all!
I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspxBut I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
KdInitStatus value is "c00000b5".I tried:
-change of hardware to 9 version
-change the comments to e1000 Ethernet card
-disable the DHCP (debugger comments must use APIPA)
-change the type of connection (bridge NAT, host-only)and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?
Thank you!
Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.
-
So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get. Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.
Well, I found the solution, just in case anyone has the same problem. Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.
-
Problem installing Adobe Reader DC on a laptop with Windows 7.
Problem installing Adobe Reader DC on a laptop with Windows 7. Screen opens with "Undefined" and the installation hangs.
The following error message appears on the script:
Line 202
Tank 13
Error: Cannot set property "innerHTML" reference to undefined or null
Code 0
URL: res://C:\Users\Char\Downloads\readerdc_en_ha_install.exe/160
Any suggestions?
Please use the Installer http://get.adobe.com/reader/enterprise/ offline
This should not give you this problem.
-
Cf11 install problem on WIndows server 2012 R2
We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine. cfm files will not upwards in the default directory, but IIS displays htm thin files. CF Administrator works fine.
Web server configuration tool will only show "None" in the box of the IIS Web Site. The usual CGI, APS, etc. were installed on IIS. IIS and CF11 have in fact been re-installed. Manual run wsconfig.exe shows no errors.
The problem is that any call to a model cfm results an error (html pages serve very well):
Error HTTP 500.0 - internal server error
The page cannot be displayed because an internal server error has occurred.
Detailed error information:
Module IsapiModule
Notification ExecuteRequestHandler
Manager cfmHandler
Error 0x8007007f
URL requested http://localhost: 80 / default.cfm
Physical path C:\inetpub\wwwroot\default.cfm
Can anyone give suggestions for troubleshooting? No newspaper appears to show all information that helps.
Solved the problem... it is not a problem of one CF but and especially an IIS problem...
(1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.
(2) restart
(3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development
(4) restart IIS and CF
(5) Web Server Config set to 'all '.
60 restart IIS and CF
The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.
-
Install OfficeJet Pro 8610 on Windows Server 2012
Hello
I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...
First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.
I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI
However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.
Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...
Thank you.
I ended up soliving this problem myself while tinkering around.
I went through the process of adding a new printer through the devices window and printers.
I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.
This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.
Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.
-
How to install IE6 on one and IE7 on another Windows Server 2008 R2 standard.
There are two servers. I need to install IE6 on one and IE7 on another Windows Server 2008 R2 standard. There is no option to delete the current version and downgrade. I tried the steps listed on http://www.enhanceie.com/ua.aspx and it made not usable IE.
Hello
Given that the problem is related to Windows Server 2008, I suggest you post this question in the Windows Server Forums.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads -
Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem
I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.
I want to connect the printer via USB only.
I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.
But every time the same problem occurs.
The printer driver is correctly installed, but the printer HP (LEDM) driver failed.
The debugging information:
Installed the device.
hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219
If I want to reinstall the driver again, I received the message:
Setup error
An entry in the Inf file is missing, the file may be Windows 95...
Could you please help me, how to solve this problem?
I need to activate the visual experience of Windows Server 2013, then the USB works
-
Cannot install windows server 2012 on VM
Well, I installed virtual box. I downloaded the ISO and VHD in windows server 2012 but will not be accepted by the Virtual box?
Josh,
I would have you post here.
http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads
Back to us for problems with Windows in the future.
-
Windows Server 2012 Foundation and SMB problems with older equipment
Hello
My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.
This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636
But of course, the solution does work with my version of the server.
Does anyone know if there is a similar fix available? I got my hunting.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Hello
If we have the license microsoft windows server 2012 and I want to install Windows server 2008.
Is this possible?
Thank you
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Windows Server 2012 BEX problem
Hello, I got Windows Server 2012 and VPS, I am connected by DRC, turned on my Tibia & Bot and 'close this window of DRC' after... 20 ~ minutes...
Problem signature: Problem Event Name: BEX Application Name: Tibia.exe Application Version: 10.9.3.0 Application Timestamp: 5726e97b Fault Module Name: Tibia.exe Fault Module Version: 10.9.3.0 Fault Module Timestamp: 5726e97b Exception Offset: 00362276 Exception Code: c0000409 Exception Data: 00000007 OS Version: 6.3.9600.2.0.0.16.7 Locale ID: 1033 Additional Information 1: e6cc Additional Information 2: e6cc222ab84bf53679fea9a972cf2b2b Additional Information 3: 996a Additional Information 4: 996a8ba1334d6fb9f6300d6752909e6d Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=280262 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt
Can U help me?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Cannot install Windows server 2012
Cannot install Windows server 2012. Whenever I get * error
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
Maybe you are looking for
-
Audio driver and modem for Satellite A30 151
I've updated my Toshiba with Windows XP PRO/SP2 laptop.After installing I found that Windows XP/sp2 is not installed the modem and audio devices. I tried to download the drivers from the site and tried to install. I got the error message saying drive
-
Cannot get alerts for agent LogFilter
Hi all We have deployed the log file monitoring on servers windows 2012, but we are unable to generate alerts on these files. Please find the attached agent logs and let me know what could be the problem. Please help me on this matter as soon as poss
-
Cannot download updates from Microsoft for Windows 7.
I made sure the firewall isn't interfering. neither my BitDefender antivirus software. any suggestions on where to find would be appreciated.
-
BlackBerry Z10 can BES5 "BOLD" BBID (BBM) be reconfigured to use the Z10 BIS?
As far as I can tell, it's a delicate issue... I used a Bold 9900 for work, managed by our BES5 servers. Also used the phone for personal use, including BBM contacts. I need is no longer to use the 9900 for work so decided to get a Z10 for personal
-
ID ID - sig - 4.1 - 4 - S92.rpm.pkg of loading constantly
Hello I noticed a strange behavior of 4235 IDS: I've got automatic updating before and it works great. Is check the directory signature on my FTP server every hour and looking for new .pkg files. When a new .pkg file is found, it is loaded correctly.