PROBLEMS INSTALLING S3 Graphics, Inc. - Video - VIA / S3G UniChrome IGP

Similar Questions

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Windows 7 driver for VIA / S3G Unicrome IGP Pro

  Is there a driver for windows 7 for this video card.

  See http://www.via.com.tw/en/support/drivers.jsp

  I think that there are not for Windows 7.

• Cannot install the graphic video library 2.2 Qosmio F50

  Hi, I'm looking for help installed the graphics Toshiba update video library 2.2 for Windows 7.

  I did a clean install of Windows 7 ultimate on my Toshiba Qosmio F50 - 10Z, installed everything fine, including Flash cards. But I have a problem installing the graphics update video library 2.2. I downloaded the version of Windows 7 GVL of the support page and found that the update includes 2 folders (?), 1.2 and 2.2.

  I ran the update 1.2 first and installed ok, but when I try to install the 2.2 update it displays a dialog box indicating that installation cannot continue because the old database of chart library was found.

  Someone has an idea in how to get this installed update?

  Thank you

  Hello

  In my opinion the update 2.2 (or new version) cannot be installed because version 2.1 was installed and the error message means that this old graph library database was found.

  In my opinion you should delete/uninstall video Library 2.1 system and then you must run version 2.2.

  Good bye

• T400: install windows 7 own, video driver problem

  Hi all

  I recently updated my computer to windows 7 with a clean install.  I installed all the latest drivers on the site Lonovo for Windows 7 and that of graphic swichable.  Unfortunately, I was making strange results on the integrated card (energy saving).  Once from time to time, the pixels on the screen won't align properly.  The link below shows a screenshot of the problem.  http://imgur.com/1kdp5 .  Sometimes, the problem occurs when I switch to windows.  Once the application will suddenly become out of sync.  The problem can be resolved by moving the mouse over the area (if it is a menu) or by resizing the window.  I'm also not sure if the problem occurs with the Ati video card since I mostly spend my time on the built-in one.

  Does anyone know if there is a solution to this problem, or do I have to wait for a new driver update?

  Thank you

  Sv3n

  You have 3 GB of memory? I have the same problem as you, but it doesn't seem to be a solution, except the upgrade to 4 GB or out 1.

• Update: problem HP 4540 graphic s AMD Radeon HD M 7650

  Update (September 23)

  Understood graphic will only switch when the AC is plugged on and laptops running on battery. While the battery is in the ac is plugged in, it won't switch. (AC in + battery or.)

  How does it eat for only on battery + after closing the game-> blue screen come to 100%.

  (I don't know he's trying to return to the HD 7650 and somehow, it does not support.)

  _________________________

  Hi there, hope you guys can understand something... so far, I have tried everything to my knowledge.
  
  First the Specs:
  
  HP ProBook 4540 s (C5E12ES), 15.6 ", Core i5 - 3210M 2 x 2.50 GHz, 6 GB, 750 GB, AMD Radeon HD 7650 M 2 GB

  (integrated HD 4000) (pre - install OS > SUSE 11)
  
  Current OS: Win 7 Professional 64-bit
  
  Problem:
  
  Installed in almost all of the drivers that were available here:
  
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en & CC = US & TaskID = 135 & prodTypeId...

  (ofc. for w7 64-bit; and they claim to work)
  
  But he never passed to the Radeon HD 7650 M no matter what I attributed to the AMD Catalyst (High Performance) + energy Max Power Mode (also checked the option all have been set for maximum power).

  So, basically, the problem is that the discrete Radeon HD 7650 M graphics card is never available. I tried to disable in the BIOS "Switchable Graphics" Mode > causes only that the HD 7650 M is not yet visible in the Manager of hardware + not available + catalyst shows that it is working properly. (+ there is no Option that worked to manually assign the gpu)

  Given that the system must be a switchable dynamic AMD chart , I can not even download other drivers than those offered by HP (won't work of course...).

  > > In games only the HD 4000 is visible (even when the 7650M is completely disabled games and videos run with HD 4000 > > who said so far only one has been used (I wanted to clarify that since some think that the HD 4000 is supported "in the background" by the discrete gpu-> is not!))

  There there no driver to manage the 7650M atm? As far as I read Sony handled somehow this problem for their products with the material mentioned above. Also tried to remove all the drivers and installation only AMD (not a good idea... no drivers of Intel HD nothing worked - well, since only this integrated gpu was his work so far).

  Oh almost forgot... the BIOS preinstalled is somehow a newer version than that offered on the section driver for hp 4540 s:

  BIOS version: 68IRR worm. F.02, 27.07.2012

  SMBIOS: 2.7

  So useful I can provide screenshots. (Side-Note: Notebook was released as this month, I guess).

  Thanks for any help/advice in advance.

  Maybe useful references:

  http://www.manualowl.com/m/Hewlett-Packard/ProBook-4540s/manual/277780?page=39

  (only page 39)

  Probably useless Info:
  Tested the system also with 3d-mark-11 > preset he advances to 'High Performance' (in the catalyst) I was surprised how the test is run (results looked like 10-20-times "less" than the average same gpu (7650M) < also it was the first time I saw a program used the discreet gpu.)

  > "Message:"... the graphics driver was not accepted. I can assure you that.

  What also bothers me is the fact that some hardware probably 4000HD Intel is really buring stable around 122-130 ° C (even if the laptop is not hot at all - maybe that the sensors are nuts...)

  

  Switching problem SOLVED!

  Because it works battery with the graphics mode I again probably energy options that can interfere - checked all and found one that blocked the graphics of switching:

  > Click on the stack > energy Options (for the regime) > improved energy options > check all entries there are 3 that may conflict with the power:

  > Set the switchable dynamic graphics for battery and ac automatic
  > Set the gpu power plan intel for performance max ac (or both - if you want to)
  > Set the ATI Powerplay - Options for optimal performance / max
  
  ! Also check that you have set the application/game to HIGH Performance in your
  Catalyst Control Center (+ do not turn off the Power Play Option in Catalyst Control Center)

  (+ do not forget after passage of balanced high-power or energy saving these entries must be defined as well)

  ↑ graphic will pass!

  ! Rest, the computer will always be bluescreen then (maybe this can also be solved by playing with the Options of energy.

  ! Also remember that applications/games will still show that you can select the HD 4000 only, but will switch discrete gpu (7650M HD). More FPS + better graphics that will prove also.
  

  Screens to make it easier to understand:

  

  

  

  

• How is it with the new iOS 9.3 I can't send a video via iMessage?

  I have an iPhone 6 more with the new iOS 9.3 installed a few hours before. I have problems with sending video via iMessage. I have tried both directly through iMessage by tapping the (camera icon) to the left of the body of the text, this in turn, I select what video to send and somehow, it is not visible in the body of the conversation in iMessage.

  Then I tried to send a video through the iPhotos on my iPhone app 6 Plus. I then type the "selection" function in the upper right, I then select my video and the entrance after the contact data in the address bar, there is no button 'Send' on tap.

  Then I tried to send a video through the iPhotos on my iPhone app 6 Plus.

  iPhoto or Photos?   iPhoto is not compatible with the iOS 8 or newer. Have you tried to share the Photos.app?

  There are complications with the iOS 9.3 update. Apple is aware of them and be released hopefully soon a bug fix.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• Satellite L300-01:00 PSLBGE - cannot install the graphics driver

  Hello everyone.

  I have a big problem with my laptop video driver.
  Yesterday, I started my windows and put Windows Vista on it.
  I got all the drivers from the toshiba site but ran into a problem with the graphics driver.

  When get it Setup starts and them it gives me an error "this computer does not meet the minimum requirements for installing the software. The Setup will exit. I must say that before the start, I also got Vista and it worked.

  So can you please help me because I don't know what to do to...
  I tried all the possibilities

  Thank you very much

  Teodora

  Hello

  You can try to install the graphics driver in Device Manager.
  Go to the Device Manager, choose graphics card, click on update driver, then point to the (ini files) graphics driver files stored on the HARD disk and complete the installation

  Try this usually it should help

• trying to install a graphics card to my office

  Hello

  I was hoping that someone could help me.

  I am installing a graphics card in my hp Pavilion 500-220ea. When I install it all that I get is black screen.

  I have reset the CMOS, disabled drivers intel and installed the video card drivers.

  I'm stuck with what to do. The area of the BIOS has been no help.

  I use a PSU Corsair cx600m so I know I have enough power to run it.

  Concerning

  Paul

  You are welcome.

  Here's a guide for replacing a video card in a computer with Win 8.1.  It can help you solve your problem.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Alienware13, graphics, external video card amplifier always inactive.

  Hello

  I just bought an alienware13 with an amplifier of graphics. And I have a GTX970 installed in the amplifier of graphics. After I start my alienware, everything seems to work fine, the graphics amplifier power light is the video card fan is running. In the pre-installed application "graphics amplifier" win8.1 I see that my external card is connected. Even with a GPU - Z, I can read all my GTX970 statistics. But it just doesn't! The loading of the GTX970 is always 0%, all applications and games running on the video chip to base. I also tried to connect a LCD monitor to GTX970, but it out nothing and the screen is still in a State of 'no signal '.

  What is the problem with my amp alienware13 and graphics? Please help, thanks!

  Hello

  I have the same problem with the gtx970. So please DELL hurry to implement a solution for this.

  Concerning

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• VIA Chrome9 HC IGP WDDM 1.1 display adapter driver problem

  I have the problem with the graphics card driver in windows 8.

  Details of the pilot windows 7 dxdiag:

  ---------------
  Display devices
  ---------------
  Card name: VIA Chrome9 HC IGP WDDM 1.1
  Manufacturer: S3 Graphics Co., Ltd.
  Chip type: VIA Chrome9 IGP HC2
  DAC type: internal
  The device key: Enum\PCI\VEN_1106 & DEV_3371 & SUBSYS_10F71734 & REV_01
  Memory display: 361 MB
  Dedicated memory: 227 MB
  Shared memory: 134 MB
  Current mode: 1280 x 800 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: DigitalPanel
  Monitor ID: MS_0000
  Native mode: 1280 x 800 (p) (59,995 Hz)
  Output type: internal
  Driver name: VTGUModeDX32.dll
  The driver file version: 8.14.0014.0081 (English)
  Driver version: 8.14.14.81
  DDI version: 9Ex
  : Model WDDM 1.1 driver
  Driver attributes: Final retail
  Format/driver Date: 27/09/2010 08:20:46, 4169728 bytes
  Would be WHQL logo: Yes
  Date stamp WHQL:
  The instrument identifier: {D7B71FE6-7031-11CF-D574-F930A0C2C535}
  Vendor ID: 0 x 1106
  Device ID: 0 x 3371
  SubSys ID: 0x10F71734
  Revision ID: 0x0001
  Strong name of the driver: oem28.inf:S3. Mfg:S3G700:8.14.14.81:pci\ven_1106&dev_3371&subsys_10f71734
  The driver rating: 00EC0001

  ................................................................................................................................................................................................................

  This integrated graphics onboard (for laptop Fujitsu Siemens Amilo Li1705) work fine and normally in windows 7. But when I install windows 8 hired no system display adapter and the graphics card, and then under show basic Microsoft card driver.

  When I update again (no update) graphics driver, back to the base driver, when I browse for driver I install the new driver and see the black screen on my screen (does not work). Run troubleschooter and no result and install the driver in the form of black start again.

  Is it possible that the driver is not supported for windows 8 and weather update for this card grapfic and driver Microsoft?

  How to install VIA Chrome9 driver on windows 8 OS?

  VIA not have new update for this.

  All Windows 7 32 drivers on THROUGH support and driver download doesn't work don't not on Windows 8, Xp drivers too.

  But the drivers for Vista works fine. I download and install this driver and the driver works perfectly:

  VIA Chrome9 HC IGP family WDDM

  Driver date: 12/01/2009

  Driver version: 7.14.14.80

  Digital signer: Microsoft Windows Hardware Compatibility Publisher

  I did not now when THROUGH on pilot air for chipset VN896 Chrome9, for now support is only for two chipset for Windows 8.

• Problem installing Adobe Revel 2.3.2

  Dear users of Revel:

  We are aware of any problems installing people are affected by the latest version of iOS, and we apologize for the inconvenience it has caused.

  We do rigorous testing before all releases, but unfortunately an unexpected interoperability problem occurred with the way our App is get bundled for delivery to customers. We are working closely with Apple to fix the problem as soon as possible, and we was again submitted to an update to see if that can help us fine-tune the failure. Thank you for your patience. In the meantime, feel free to Revel access via your web browser, Mac, 8 windows, Android devices.

  I will update this thread when I have new information.

  Kind regards

  Guinot

  Dear users of Revel:

  As you know, many users had questions Revel iOS update version 2.3.2 installation. We are pleased to inform you that the problem has been resolved. We know how frustrating it must have been to not be able to access your photos and videos and are very sorry for all the inconveniences.

  Visit the App Store and update your application and thank you for your patience as we worked to solve the problem. Please make sure that your operating system is on iOS version 7.1 or higher during the updating of the app. We do rigorous testing before all releases, but unfortunately an unexpected interoperability problem occurred with the way in which our application bundled up for delivery to customers.

  If you are unable to upgrade to iOS version 7.1 or above at this time and cannot load revel from the app store on your device, please download the latest version of the Adobe Revel app from iTunes on your computer and sync it to your iPhone or iPad. If you are unfamiliar with this process, please connect your iOS device to your computer with the USB cable provided with your device. Launch iTunes on your computer and select help > iPhone or ipad user guide. There are help topics explain how to connect and synchronize your device.

  If you have other questions or problems, please go to our User Forum and post it on this link: https://forums.adobe.com/thread/1513106.  Once again, please accept our most sincere apologies, and thank you for your patience.

  Team Adobe Revel