Problems loading of the ipad. When you insert the charging cable, it must be at a certain angle to recharge.

Similar Questions

• I have a problem loading with my iPad Air2.  I used other cables and Chargers but still doesn't load.  I plugged the iPad to iTunes and a DFU after he took a few hours that the iPad has been completely restored and apps reloaded.  In addition to the

  My iPad will not normally charge.  I tried different cables and Chargers.  I plugged the iPad to iTunes and reset a DFU.  After only a few hours the iPad finished reloading all software and reloaded new apps, it had also charged the battery but the problem remains, I still can't load the iPad normally.  Any help out there?

  There are very few things that keep loading an iPad. Some of these (other charger plugged into a good outlet, different cable) you have already tried. Others are:

  1 dirt, lint or fuzz in the port of loading of the charger or the iPad. Check and clean carefully if necessary.

  2. a software failure. Reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  3. failure. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

  When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

  Hi John,.

  1 are you referring to AutoPlay settings in Windows XP?

  2. did you of recent changes on the system?

  If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  You can also consult the following article:

  How to change or choose the program that starts when you double-click a file in Windows XP

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "this file does not have a program associated with it" message when you insert the sd card

  When I insert an SD card into my computer, I get a message that says f:\ that this file does not have a program associated with it... I know I can set default programs with the types of files in the Control Panel, but how do you recognize what to do when I insert an SD card in the computer?

  Windows 7
  The problem is caused by the automatic game changing options, this can sometimes happen when you install a new program, but they can easily be changed back. Click 'start' at the bottom left, go into "default programs" on the right side of the list (under computer / doc/images etc.) select "Change AutoPlay settings.
  You will find prob some of the sections had the new auto run program, just edit those you want (or all) "ask me every time", you will find that when you insert an sd card, you get the options normal download, copy, etc. as usual.

• I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.

• Error message Windows XP released "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp

  Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.

  Hello

  ·         You have a HP printer connected to the computer?

  If so, try the article you mentioned.

  Generic host process error message and a flashlight icon appear

  If this is not the case, check to see if this article helps you.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• What happens when you insert/modify/delete a row in a table - concepts

  I am trying to understand the below concepts regarding the internal concepts (for example, undo and redo)

  (1) what is happening in the database when you insert a row in a table?

  (2) what is happening in the database when you update a row in a table?

  (3) what is happening in the database when you remove one line in the table?

  I have read the oracle documentation and mistook the redo and undo behavior. It would be great if someone explains the concept in a simple way.  I'm a novice programmer to understand database concepts. Any help would be much appreciated.

  INSERTIONS and deletions are handled the same way.  The cancellation of an INSERT is a DELETE.   The cancellation of a REMOVAL is an INSERT.

  Therefore, the generation 'Cancel' for INSERTION is less than that of a DELETION (because the cancellation of a DELETION is to reinsert the line - the value of each column in the row must be captured in the undo).

  If restore you an INSERT, then Oracle executes effectively a DELETE tablename WHERE rowid =... rowid_that_was_inserted.  A cancellation for an INSERTION is 'rapid '.

  If restore you a DELETION, then Oracle executes effectively an INSERT tablename values (col1, col2, coln).  The cancellation of a DELETION takes more time because Oracle would have to re-enter the values.

  Remember that Oracle also captures the redo to undo it (and do it again for the price drop if you do a restore).

  Hemant K Chitae

• LR opens when you insert a CF card

  I want to

  eliminate the auto open function when you insert a

  CF. card

  There is a solution in the FAQ, but there is no icon in the taskbar in Windows 7.

  How to stop auto opening thie?

  To stop the auto LR from do you it in the preferences.

  To control the behavior of windows you select AutoPlay control panel and you can completely disable or select what you want to happen in various circumstances.

• information about the warranty on the charging cable?

  Product: HP Pavilion dm4-3170se

  OS: Windows 8

  I bought this laptop in August 2012 (I still have the receipt of buydig.com in my email), and today the power cord has suddenly stopped working. I had this problem with other laptops HP of the mine, but they all use another cord as this computer with the problem. Also, I left the computer with a full load and now there not, even without the power cord. So I don't know if the problem is the battery or the charging cable.

  I live in Russia and I can't really send this computer to the States for a replacement. But can I get a replacement charging cable, or a spare battery, if that's the problem? I'm in a one year warranty.

  Any way I can test it to see if its the battery or the power cord (or both for some reason any?) Any help would be appreciated.

  No dice, the charger light doesn't even, on the body of the computer.

  No offense to you and thanks for your help, but I thought it was some kind of official support forum where I could put in a warranty claim. As if this site is not quite confusing already... where I can do?

  Andrew

  EDIT: Found the warranty claim form.

• Blue screen when you insert the DVD - M40X

  Hello
  I have a new computer laptop toshiba satellite M40x-183. (with DVD super multi)
  After ten days of buying it, I found a problem when playing some DVD and CD, when I insert the dvd I got a blue screen saying... There is an error and windows can stop harmful to your pc and I have to contact the support then start dumping from 100% to 0%...
  I have tried the dvd in many other dvd players and it works perfectly. Team support here told me that this type of dvd player are unable to process this format how it happens so that older toshiba and other laptop brands can do!
  Is there a solution to this?

  Hello

  Well, as the support service team say that the DVD player is not able to read this format.
  But I can't give you a good answer why it s not possible to play this DVD. It s a simple fact that there are many DVD and CD formats on the market and number of readers is not able to play some formats.
  Have you tried to play burn DVDs? I recommend you to test the DVD from other manufacturers. I use TDKs and it works correctly.

  Good bye

• images dialog box is empty when you insert the memory card

  This is after you have inserted a card high capacity in the player, which hung the memory slot.  Now just insert a regular memory card, the dialog box appears, but there is nothing in it.

  Sorry if the info seems confused but maybe the
  answer is here somewhere.

  FWIW... There used a similar problem with a Sony memory
  Stick... the solution is to insert the stick into the drive and
  Restart the computer... somehow this would reset the
  stick.  I don't know if it will work for you.

  You may also check your AutoPlay settings...
  If you insert the card and go to... Start / my computer...
  and right-click on the drive letter for the location of in the map is...
  choose... Properties / AutoPlay tab...

  Choose... Mixed content...
  Tick... Select an action to perform
  On the left, click on the default button / apply / OK.

  Give it a try...

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

  Regarding the card... have regular SD, you tried to manually
  Download the pictures?

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / my computer... it may be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

  Finally... the AutoPlay Repair Wizard can be worth a try:

  Microsoft Autoplay Repair Wizard
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad

• check the trigger quantity - at hand when you insert the order quantity

  Jin
  I have problem with trigger, I use the OE schema
  I have the form master / detail for orders and Order Details, that I need when I insert the order quantity to check the quantity available for each product using the trigger
  I use oracle 10g developer
  any help would be appreciated
  Thank you very much

  2MEO wrote:

  Bamba says:
  What is the structure of your database? and this code that you write?

  don't tell that you don't know how write the SQL query :)

  Thank you for your quick response
  I can write the SQL query
  I use these lines:

  SELECT quantity_on_hand
  INVENTORIES
  WHERE Product_ID =: Product_ID;
  IF: quantity > Quantity_on_hand THEN
  MESSAGE ("the inventory is not enough");
  END IF;

  Why do you think I can't write same SQL query?
  Thank you Bailey

  The query is bad :) there is no INTO clause

  Write it on quantity WHEN-VALIDATE-ITEM and KEY-NEXT-ITEM

   declare
     vquantity number;
  begin
   SELECT quantity_on_hand
    into vquantity
    FROM INVENTORIES
   WHERE Product_ID = :Product_ID;
  
   IF :quantity > vquantity THEN
      MESSAGE ('the inventory is not enough');
       raise form_trigger_failure;
   else
      null; -- or next_item if you are using KEY NEXT ITEM trigger
   END IF;
  
  Exception when no_data_found then
    message('Invalid product ID');
   raise form_trigger_failure;
  END;
  

• How can I get rid of the error code 0 x 80010108 when you insert the SD card

  My SD card is good and I can access images using my computer to start up. I can also see my saved photo gallary pictures. What I can't do, is when I insert the SD card and select images I get the above error message. Help.

  I would say that you have two choices,

  Photo Gallery of windows open before inserting the sd card,

  Then click on import, then insert the sd card.

  Or you can click on the Start button and click computer.

  Insert the sd card,

  He appears as a removable disk that you can right click and click Open,

  Then manually, copy and paste the files in a folder or an existing one,

  Do not use auto play close the dialog box or use the Windows Explorer instead.

  Oops, that's three choice :)