Similar Questions

• Problem of airtime with 10.0.1

  After updating iOS 10.0.1, I can't stream music to KEF X300AW for iOS devices. Does anyone have an idea or suggestion?

  Thank you

  I have the same problem with my speakers Libratone :-(

• Problem of airtime with the same SSID

  I often use AirPlay to my iPhone and iTunes on my PC to play for my (home theater installation) AVR - 1506 Marantz.

  Configuring wifi in our House are a router/modem to the ISP and an Asus RT-N56U (in access point mode) with DIFFERENT SSID to which I don't have problem to play AirPlay on any device. I had the same SSID when so I can use wifi roaming without having to change the SSID whenever the other signal weakens.

  When I put two (router & AP) with the same SSID, Airplay icon will not be displayed? But if I put a different SSID to one of the two, airplay icon is back. Channels are on ch.1 (router) and ch.11 (AP). Someone knows how to set up?

  UPDATE:

  Disable NAT in fact access point the AirPlay icon always appear but he cannot yet play through my APR.

  * all updates *.

  12.4.3 iTunes

  Windows 10 updated, firewall offshore

  Marantz 1506 firmware update

  always put iPhone to update to the latest version

  The routers are also updated to its latest firmwares

  What I believe you are describing is a network expanded through repetition, the Apple TV does not work well with repeaters. Try a different configuration.

• Chromecast and Airplay on the Netgear wndr 4500v2 connection problems

  I hope someone is able to help me with two questions, I have based on Chromecast and Airplay.

  Chromecast problem:
  Material: OS Android Lollipop 5.1.1 on a Sony Xperia Z2, 10 Windows on a laptop Lenovo S440 and Chromecast 1.

  Chromecast worked fine for a year with the same material. For two months, the Chromecast became unstable. When I want to stream Netflix from my Android phone then Chromecast icon is not available or the ico is available but when I select the icon disappears. That's why I have to reset the router and then it does not work properly. It continues to work fine until the next day. Then the same problem occurs. I have to reset the router every day when I want to use the Chromescast. I installed the new firmware again on the router, but this has not solved the problem. The router settings are accurate as described in the pages of Chromecast and netgear support.

  Problem of airtime
  Material: iPhone 4 iOS 7.1.2 Marantz receiver SR 6006, including air time, DHCP is enabled, latest firmware has been downloaded, exact version is not mentioned.

  When the Chromecast problem appeared the problem of airtime appeared as well. When I use Spotify (latest version 4.1.0.941) on the iPhone 4 the Airplay icon will no longer appear. Before that, airplay icon is available for several years and he always worked without problem as well with my old router like netgear router with current 4500v2. For some reason any Airplay is no longer in effect. The router's settings are not changed.

  Help or advise is welcome.

  The problem is perhaps due to interference, especially if both you are on the same channel.

  Better, it is recommended that you set a different channel to avoid such problems.

  Keep us updated, and I hope that this solves the problem.

• AirPlay, DO, does NOT, with, my, arrant, iOS, 10

  AfterUpdate iOS 10 I can't use AirPlay on my marantz stereo? Its work in the iOS 9

  Hello K352,.

  Thank you for using communities of Apple Support.

  I see that you are having problems with the help of airtime to your Marantz stereo. The enclosed article provides basic troubleshooting for problems of airtime: get help with AirPlay and AirPlay Mirroring on your iPad, iPhone or iPod touch

  Best regards

• Slow rate of AirPlay

  I use AirPlay to get streaming football online (from the Australia, is not available outside the internet streaming via browser) my MacBook Pro (via the wifi of 5 MHz) to my Apple TV and then (via HDMI) to my TV big screen. When the action on screen is fast (i.e. 90% + screen redesigned between the ribs), it becomes very bad on the TV due to the loss of images: according to my estimate, it falls to 3 images per second. The frame rate video of MacBook Pro is much better and watchable, is not a streaming problem, but a problem of airtime. I'm using the latest Mac OS, not sure of the Apple TV. How can I improve the frequency of images on the big screen?

  1. Restart the Apple TV (settings > general > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  4. Restart your computer.

  If you're still having problems, try disabling bluetooth, if it is enabled, also try to use 802.11n for wifi if you are currently using 802. 11B or 802. 11 g. You can also try to remove any other software associated with the screen sharing or streaming to remote screens that you may have installed at one time.

  In addition, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• Apple TV Airplay of 4 works is not in Sleep Mode

  Hi all

  I have a problem with my new ATV4 and the use of airtime. If I turn on the ATV with the included remote control, I have no problem using airtime and everything works as it should. However, if I put my ATV in standby mode after a few minutes the Airplay icon will disappear and I am not able to start it by sending the contents of airtime to it (btw the remote for iOS devices app is also not able to connect in standby mode and run it). Now, I've already owned an ATV2 and with this device I've ever had any of the problems noted above. I tried many things such as giving the ATV a fixed IP address, deactivation and reactivation Airplay, restart and finally completely restore the device. After that nothing helps I contacted Apple for support and after several calls which included to restore the device again once they are now trying to tell me that my problem is
  not a problem at all, but it is intentioned behavior of the device. Please can someone of you confirm that you are able to connect to your ATV4 also during the night before and wake up, it? With this information, I would then contact support again.

  I already thank you in advance and best regards

  Oliver

  Yes, I am able to launch an event Apple AirPlay TV 4 sleeping. In my particular case, I have a mixed network (ethernet and wifi) between the two devices.

• AirPlay stall

  I've recently updated iTunes to the newest version 12.4.0 and, since then (I may be wrong on the calendar, but it is around then), my my AppleTV (then my speakers) AirPlay has been stalling. I've restarted both iTunes and Apple TV last night and, after taking an abnormally long time to connect (30 seconds), then the speakers played normally for about 45 minutes. This morning, when I woke up, I chose the AppleTV in iTunes to listen to music and, once he couldn't connect, remote speakers disappeared as an option. In addition, my iPhone either AirPlay for the AppleTv. Any help would be appreciated.

  Thank you

  Matt

  I thought about it. I had chosen a channel for the wifi was not working, so problems with airtime and the AppleTV. When I turned on the router to Auto for the channel, the problem has been resolved.

• drops game

  So let me explain my situation. I'm an apple guy. I have everything Apple. 5K iMac, iPad pro, alll iPhones retina 6 +, Apple TV 2nd Gen and have just received the new AppleTV, Apple Time Capsule 2 TB, multiple Airport extreme,... My problem is I have a big house and want to play music throughout the House. I understand that apple switched things around when my older Apple TV might take is no longer more than one speaker at a time. My older AppleTV could make each Airport Extreme as well as the AppleTV.

  My problem is multiple then let me try and break it down so I can get help.

  1. Since the airport/appletv new switch on 2-3 years where you can purchase multiple speakers is no longer, and a single by AppleTV or an iOS device I was seen fall issues. My AppleTV will play and then suddenly pick up and I have to restart to operate devices. I NEVER had this problem before the update a few years ago.
  2. "My computer (retina 5K 27") I bought because I thought that our 24 "iMac was dated, but still everyday I get airtunes drops when I choose more than one speaker in the iTunes menu. Man, I bought this new computer to get by for the problems of airtime. My wife is n = angry with me because it is the same as for the iMac 24 "older.
  3. I bought the new time capsule ac band without change.
  4. iPad Pro by using for example WHAALE always the problems of drop on the AppleTV but slightly better than the iMac of the retina.

  Here is what I was asking. If I get for ind = position as an Apple product

  Will of AC3200 Tri - Band Gigabit router wifi & NETGEAR speed DOCSIS 3.0 Cable Modem together high Nighthawk NETGEAR X 6 that help?

  In any case, here's the deal.

  These drops airtunes are ruining my social gatherings. My wife thinks I don't know no * because our music stops in the middle of our parties. Please can someone help me please please please.

  There are a large number of messages on airplay stall.

  I have to admit that I am more a guy from network to a man of music... but let me tell you the media streaming more wireless is a very bad idea... He has not never worked properly when I tried... and I simply decided to avoid it.

  Execution of ethernet... everything wirelessly you are using must be single hop... That is to say

  iMac - wireless - airport - without thread - ATV

  Double jump is wireless... each package goes through double treatment. The speed is extremely small because the without thread can't Tx and Rx at the same time... or he can talk to more than one client at a time... This means that if there are a few clients, you can't have a workflow.

  Since the airport/appletv new switch on 2-3 years where you can purchase multiple speakers is no longer, and a single by AppleTV or an iOS device I was seen falling issues

  Then why he has worked in the past... I think it was because he was using the multicast and apple had IGMP snooping works well in the older router.

  http://routerguide.NET/enable-IGMP-snooping-on-or-off/

  But they have made some significant changes in the newer routers that have caused a lot of problems.

  Here is the very general corrections to apple...

  Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch - Apple Support

  The most important I think is just to unload wireless and connect by ethernet things wherever possible.

  I doubt buy a different router will solve the problem... I think you better buy in the Sonos or one of the other systems that use iTunes but to their own networks of him.

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

• airplay iOS 10 problem

  I have a b & w a5, but I can't find in the mailing list after update to ios10... Why this happens?

  Hey there GDGONGDUI,

  From your post, I see that your iPhone does not display your speaker B & W A5 in the mailing list. Help me to solve this problem, please follow the steps below:
  

  Don't see the AirPlay device you need? Here is what you should check:

  1. Make sure you plug in and switch on the device of airtime you want to broadcast on.
  2. If you are streaming to an Apple TV, make sure that the AirPlay is enabled in settings > AirPlay.
  3. If your Apple TV using Ethernet, * check that the cable is plugged into the router that you use for the free Wi - Fi connection.
  4. On your iOS device, go to settings > Wi - Fi and check that you are on the same WiFi network as your Apple TV or any other AirPlay device.
  5. Check the same thing on your Apple TV (or other AirPlay device):
     • For Apple TV (4th generation), go to settings > network. Make sure you are on the same WiFi network as your iOS device.
     • Apple TV (2nd or 3rd generation), go to settings > general > network. Make sure you are on the same WiFi network as your iOS device.
  6. If you still need help, contact the Apple Support.

  Get help with AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch

  See you soon.

• cursor problems

  Hello

  The cursor on my MacBook Air selects texts, emails or icons out of the Blues; the cursor moves to other locations during the strike and does not allow to type a complete sentence. I disabled all the gestures the trackpad section of system preferences, I started the Mac Safeboot mode a couple of times and nothing has solved the problem. It's a MacBook Yosemite 10.10.5 2012.

  Any suggestion on how to solve this problem?

  Thank you

  There are several possible causes for the behavior. Please take each of the following steps that you have not already tried until it is resolved. Some may not apply in your case.

  1. follow the instructions provided in this support article, so this one, as appropriate. A damaged or defective power adapter could be the cause, even if it's the right kind.

  2 simultaneously press the four corners of the trackpad and release. If there is no effect, it is likely to be temporary, and in this case the device must be repaired or replaced.

  3. disconnect or turn off each Bluetooth or USB pointing device, one at a time, testing as you go. You may be able to identify one that is defective. By a pointing device "," I mean a device that moves the cursor, trackpad, mouse, trackball, or tablets. A regular keyboard isn't a pointing device. If you have a desktop without a built-in trackpad design, at least an external pointing device must be active at all times.

  4. If your model has an infrared receiver for use with an Apple Remote, turn off .

  5. This step is applicable if you are using a Mac laptop with a built-in trackpad, and you also use an external mouse or trackpad. Open the accessibility in System Preferences pane, and select mouse and Trackpad in the menu on the left. Check the box marked

  Ignore the built-in trackpad when mouse or a trackpad wireless is present

  Credit for this observation to the members of the CSA PattMK.

  6. reset the system management controller.

  7. If you use a mouse or a trackpad, Bluetooth, investigate potential interference sources, including 3 USB devices.

  8. a swollen in a laptop battery can encroach on the trackpad underneath and cause erratic behavior. If you have trouble clicking the trackpad, it is probably the reason. The battery must be replaced without delay.

  9. a faulty device or a damaged cable can cause the built-in trackpad to a MacBook to behave erratically. If you use the wired devices, disconnect them one at the time and the test.

  10. There is also a report of movement erratic cursor caused by an external display that was plugged in but not turned on.

  11. If you use transfer, disable it in the general pane of system preferences.

  12. If the mirroring of airtime to a TV is turned on, turn it off.

  13. If none of the above apply, or if you have another reason to believe that your computer is remotely controlled, pull it out of the network by turning off Wi - Fi (or your Wi - Fi access point), disconnect a Bluetooth network connection, then unplug the Ethernet cable or a USB modem, whichever is applicable. If the movement of the cursor stops at the same time, you should suspect an intrusion.

  14. an appointment of 'Genius' in an Apple store to do the machine or the tested external trackpad.

• Receiver Yamaha RX-A730 of airtime either available on iOS devices

  Hi all

  Since an update of my wireless network, my yamaha receiver RX-A730 airplay functionality is unavailable on my iOS devices. It still works, but since an update of my wireless settings I can't listen to music more than my iOS to my Yamaha via Airplay receiver devices.

  I didn't replace any material or I got an update of the firmware (latest version installed).

  All devices (iOS and receiver) are connected to my wireless network that comes from my Airport Time Capsule (2, 4 GHz and 5 GHz active). My time capsule airport is connected to my wireless router with the wireless signal was turned off. If only my Time Capsule Airport sends a wireless signal.

  It seems not to be a problem with network or connection that I can access my Yamaha receiver via the browser of my MacBook. The receiver is connected to the same network as all my other devices. Also, I can control my receiver on my iPad and iPhone via the application of receiver AV Yamaha wireless and I can wireless stream my music to all my devices on my receiver via Spotify Connect.

  All these features are working fine on my receiver, but the only thing that doesn't work is the airplay feature. The function of airtime on my receiver not just appear on my iOS devices (which always worked correctly).

  Can anyone help this issue?

  Thank you.

  Björn

  Hello BaronBoris,

  Thank you for using communities Support from Apple!

  I understand that your Yamaha receiver is is no longer recognized for AirPlay on your iOS devices. I see as well as you tried to isolate and resolve problems already, but the problem persists.

  In this case, I suggest reading more if you do not see the device you want to listen to section in the following article. It seems that you have completed these steps already, but in the context of them will ensure that everything is correct.

  If you do not see the device you want to broadcast on

  When you tap AirPlay on your iOS device, you should see a list of devices that you can stream the content to. If you don't see the device you want, follow these steps. After each step, try again:

  1. Make sure that the device that you want to broadcast to trendy East and under tension.
  2. On your Apple TV, make sure that the AirPlay is enabled in settings > AirPlay.
  3. On your iOS device, go to settings > Wi - Fi and verify that you are on the same WiFi network as your Apple TV.
  4. On your Apple TV (4th generation), go to settings > network and verify that you are on the same WiFi network as your iOS device. Apple TV (2nd or 3rd generation), go to settings > general > network. If your Apple TV using an Ethernet connection, check that the cable is plugged into the router that you use for the free Wi - Fi connection.
  5. If you use an iPad, scroll to the top and down in the list of devices to see all available devices.
     
  6. If you still need help, contact the Apple Support.

  Get help with AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch - Apple Support

  See you soon!

• How to airtime full size to a projector

  I use a projector for the job and if she had directly plugged into my macbook pro to use.  I just got an Apple TV to wirelessly connect both via airplay.  It works, but the picture is not it's 'full size '.  It is as if it is narrowed down.  When it is plugged directly into the spotlight my image covers the full screen, using airtime the projected image is considerably smaller.  Is there a way to get around this problem or difficulty it?

  CMSPP - adjusted Display Prefs (in System Preferences) to optimize for tv?

  Good luck, Tom

• I cannot airtime to mac mini, but can to appletv from iphone 6

  Hello, I'm new to mac I have experience with 1st gen appletv and the iphone for the iphone3. My problem is that I can't my iphone6 airplay for my mac mini (later). I can from my iphone to my appletv (4th). It does not show in the airplay as a device tab. I tried to find the cause, and maybe I'm not wording it correctly and as possible. Any help would be greatly appreciated.

  The airtime to a computer, you need an application on the computer. See:

  You can AirPlay for a Mac Mini