Problems of compatibility in Windows 8.1

Similar Questions

• ReadyNas Duo and problem of compatibility between Windows Vista?

  Hi all

  I currently have the installer to readynas duo work that is used to store and share files / information to 3 other computers that are connected wirelessly (I think?). The problem is that when you try to access the files on it, they are extremely slow to load, and sometimes come as "not responding" but finally after load up to 3-5 minutes, which of course is not optimal for a work desk. This slow loading time occurs on 2 of the 3 computers, that it works great on windows 7, the other two are vista.
  This could be a compatibility issue with vista or a problem with the duo of nas? IM leaning towards a problem vista as windows system 7 works fine without any problems.
  any help appreciated thanks

  Could be a problem with Vista. This area was redesigned in Windows 7.

  http://Channel9.msdn.com/blogs/Darryl/server-message-block-SMB21-drill-down

  http://Channel9.msdn.com/blogs/Darryl/troubleshooting-Windows-smbsmb2-issues

• y at - it a fix for the problems of compatibility for windows Vista when you try to install windows 95/98 games?

  just replaced an old unit under xp home which took place games supporting windows 95/98, new unit has windows Vista and will not load these games.thanks for any help.

  Hello

  Have you tried compatibility mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Having a problem of compatibility of Windows 7 with Canon D646U Scan equipment

  have windows 7 need to install canonscan D646U which can make

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• HP pavilion dv6-3280 ca: compatibility with Windows 10

  Hello

  Just upgraded to Windows 10.

  Someone was able to install the drivers for "AMD Mobility HD 5000 Series"

  and "ATI Mobility HD 4200 Series"

  I get "Windows has stopped this device because it has reported problems. (Code 43) "for the AMD

  and "no driver installed" for the ATI card

  Thank you

  RJLX

  Hey @rjlx ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-3280 ca and problems with compatibility with Windows 10.

  If your computer is experiencing problems find and install updates of the operating system, try to use the Windows Update Troubleshooter to fix the problem.

  If this is not enough, you need to restore the laptop to a previous version of Windows.

  Thank you.

• Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.

  Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.   Any ideas?  It is my wife's favorite.

  Hello giant,

  It is not possible to use 16-bit on a 64-bit computer applications/games.

  However, you can download and install Wondows XP Mode for windows 7. Later, you can install your 16-bit application in XP mode.

  You can download the application from the link given:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  After back and let us know if it helped to solve your problem.
   
  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems installing iTunes on Windows 10 12.3.1.23

  Hello

  I had this problem for two weeks, I don't know how to solve, and it would be good to have help.

  Two weeks ago, I noticed that after I had plugged my iPhone into my PC 5, only Windows Explorer recognized iTunes didn't.

  So I tried to see if there were updates for iTunes, but no update has been published.

  I used Windows 10 tools to uninstall it and then tried to install it again.

  Before that, I used CCleaner to make sure that no left, files or old registry key remained in Windows.

  Then I tried to install iTunes 12.3.1.23 by downloading from the Apple Web site and by opening the Setup program.

  Since then, every time, when I try to install iTunes, installation work until it says "Restore action", and a new mask appears, where it is written that there is a problem and that Setup could not install the software.

  After trying this for 3 - 4 times, I went to C:\Users\MYUSER\AppData\Local\Apple\Apple Software Update and tried to run all executable files in this folder, which contains installers for each program, Apple needs to install iTunes on PC separatelly, distinguished by the installation program downloaded by the Apple because one website you can download contains all the facilities of programs in a single installer.

  I managed to install all the software, with the exception of the Apple Mobile Device Support (version 9.1.0.6), who, as program controls when a unit Apple is plugged to the PC, and it has not worked since the beginning and is the one who made me do all this, in my view, is the same as the one send me problems during the installation of iTunes when I run the installation program downloaded by the Apple Web site.

  Anyone have the same problem and/or know how to fix this problem?

  I have 10 Home Windows (64-bit) version 1511.

  Thank you

  A

  SPECIFICATIONS OF THE PC:

  Name: HP Pavilion 15-P258NL

  OS: Windows Home (64-bit) version 1511 10

  CPU: Intel Core i7-5500U @ 2.40 GHz

  RAM: 16 GB DDR3

  GPU: NVIDIA GeForce 840 M with 4 GB of dedicated DDR3 memory

  FEATURES of the iPhone:

  Model: iPhone 5 s, black

  Capacity: 16 GB

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Your library must be affected by these measures but there are also links to the backup and recovery advice it should be necessary.

  In some cases with 64-bit systems, you may need to install the version of iTunes for Windows (64-bit-for older video cards) and QuickTime to enable iTunes work with some videos. 32-bit users must install QuickTime.

  TT2

• is it possible to load and execute space cadets in windows 7 on a Windows XP disk. then running in a mode of compatibility for Windows XP or 95

  original title: Space cadet 3D pinball

  Pinball Space cadet is not not available for windows 7. is it possible to load and execute space cadets in windows 7 on a Windows XP disk. then running in a mode of compatibility for Windows XP or 95. I have a relevant disc that I purchased when using XP (and seriouly consider replace Windowsd 7 with). If it is possible, are there problems to download it.

  Try this: http://mspinball.weebly.com/download.html. He was installing a short test, and it works (download and installation may alert you to "Unknown Publisher", but various analyses did not find anything harmful). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• "the software you are installing has been Windows logo testing to verify its compatibility with Windows XP."

  so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?

  Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• Problems faxes sent using Windows - Windows XP - Windows XP printing and fax

  I have Windows Fax properly installed under Windows XP SP3 with Aztech SoftK56 Data Fax PCI Modem (manufacturer CXT).  The modem receives incoming faxes, but does not send.  The Fax Console States that there is 'No response' to fax numbers that were entered correctly and I first rang just to check if they are indeed the fax number and if they work. This has been attempted without dialing rules, as well as the rules of composition and is still a problem.
   
  Fax numbers that I tried to send to are of the format: -.

  1 020-7833-nnnn 2.  020-07380-nnnnnn 3.  01324 - nnnnnn

   
  NB. an attempt was when the Fax Console has awarded occupied status "line".  It was too fake I think.
   
  Device Manager indicates that the Fax Modem works properly.  I agree completely with this.
   
  The Fax Modem receives incoming messages that suggest that the Modem is compatible with Windows Fax under Windows XP SP3 and I should also be able to send messages using Windows Fax.
   
  Have you the XP community and other suggestions?
   
  Problems with faxing using Windows Fax in Windows XP seems to have been a problem for a number of people.  However, there is no published statement of a solution that I can find.

  I have Windows Fax properly installed under Windows XP SP3 with Aztech SoftK56 Data Fax PCI Modem (manufacturer CXT).  The modem receives incoming faxes, but does not send.  The Fax Console States that there is 'No response' to fax numbers that were entered correctly and I first rang just to check if they are indeed the fax number and if they work. This has been attempted without dialing rules, as well as the rules of composition and is still a problem.

   

  Fax numbers that I tried to send to are of the format: -.

  1 020-7833-nnnn 2.  020-07380-nnnnnn 3.  01324 - nnnnnn

   

  NB. an attempt was when the Fax Console has awarded occupied status "line".  It was too fake I think.

   

  Device Manager indicates that the Fax Modem works properly.  I agree completely with this.

   

  The Fax Modem receives incoming messages that suggest that the Modem is compatible with Windows Fax under Windows XP SP3 and I should also be able to send messages using Windows Fax.

   

  Have you the XP community and other suggestions?

   

  Problems with faxing using Windows Fax in Windows XP seems to have been a problem for a number of people.  However, there is no published statement of a solution that I can find.

  Fax services Windows XP is not a very robust application.  The usual answer to questions such as yours is, "If the modem is not on the compatibility list hardware Windows XP, then it probably won't work with Services of Fax XP."  The problem with such a response is that the XP HCL (or whatever Microsoft changed its name to) is no longer available, and even if that were the case, you probably couldn't find one of the modems listed to sell more.

  Your phone numbers are clearly not to the United States.  In the United Kingdom perhaps?  If you are using dialing rules, so the number called and the call number must be included in the 'canonical form'http://support.microsoft.com/kb/318575/

  With the American numbers, this means that they would look like this: + 1 (202) 456-1414 (standard White House). If you call a London phone number, it could be something like this: + 44 (020) 7782-5000 (Sunday Times).

  I'm sure that you must sign, almost certainly you need parentheses and don't know the spaces and dashes. For this reason, I don't usually use dialing rules.

  When you leave the area for numbering rules uncontrolled, you must enter the phone number EXACTLY as you would if you were composing a normal phone using the line to which the modem is connected.

  Try to send a fax to your phone (mobile or not, it is not serious).  Is called ringtone? When answer you, you hear fax tones?

  Based on your answers to the above, we can (or cannot) be able to move forward in order to diagnose your problem.

• Need computer help for problems of compatibility with Sony Clie PEG-NX73V 16 MB of handheld PDA Vista 32 bit

  Have used the customer for some time, but after a recent update from windows July 14, Windows decided my camera was more consistent. When I try to Hot Synch, an error message appears telling me that my USB deivce is not recognized. Device shows that the Device Manager is hanging with the USB port, but only as an unknown device. My HotSync Manager has been reinstalled and I made it is compatible with XP, which usually healed a similar problem when I started using Vista.

  All ideas

  Hello

  It seems that Sony Clie PEG-NX73V is not fully compatible with Windows Vista. For more information, please see the following link:

  Sony Clie PEG - NX73V Vista compatibility

  You can completely uninstall and reinstall the Sony Clie PEG-NX73V and USB controllers.

  Method 1:

  Step 1:

  Uninstall the Sony Clie PEG-NX73V from the Device Manager and from programs and features.

  Uninstall a program

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Method 2:

  Try to reinstall by following the steps:

  a. installation of software on the cd, open the cd and right-click on setup.exe and compatibility of windows xp and the installation if a window appears for the drivers, click use old drivers anyway.

  (b) in 'Start' > all programs > Sony laptop you can right click all the shortcuts like 'Palm desktop for CLIÉ', 'install tool', 'Hot sync manager' and set to run in xp compatibility mode.

  Hope this information is useful.

• Error: Dragon Naturally Speaking seems to work in Compatibility Mode Windows, which can lead to errors. We recommend to disable the compatibility mode for the program natspeak

  Original title: Dragon Naturally Speaking will not charge. He was working. I have time. The only thing different is my 10 3 demo of windows expiredeinstalled

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Dragon Naturally Speaking does not load. He was working. I have time. The only thing different is my demo windows 10 expiredeinstalled 3 programs you have problems with
  • Error messages Dragon Naturally Speaking seems to work in Compatibility Mode Windows, which can lead to errors. We recommend to disable the compatibility mode for the program natspeak
  • Recent changes to your computer
  • What you have already tried to solve the problem I find no windows compatibility mode. I do not know how

  Hi jrskona,

  1. don't you make changes before the show?

  Try the following steps to disable the compatibility mode.
  a. Locate the launch of Dragon NaturallySpeaking file, right-click on it and click Properties.
  b. click on the Compatibility tab.
  c. in compatibility mode, uncheck the box "run this program in compatibility mode for".
  d. click ok to apply the changes.
  e. check if the problem persists.

  If the problem persists, then contact the program vendor support team:see Dragon NaturallySpeaking support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HELP Please, combatability problems who upgraded to windows 10

  I am running Windows 7pro.

  After my first attempt to upgrade to Windows 10 it seemed to take and I was happy with the results. After about 2 half days, he began to show my hard drives, software was not compatible with "Intel Rapid Storage Technology or HP 3d DriveGuard technology.

  I tried to reinstall the software, but it did not help.  After stopping for the night I started my system the next morning to see that it was not to find any OS and doing together pre tests, I realized one of my hard drives has been damaged.

  Not only was my OS went he destroyed one of my hard drives! I spent over 150.00 to return a little of my normal computer.

  I guess that Windows 10 never "will be" on my computer, but would like to know if others have similar problems.

  But my story can help others with similar systems or software and the upgrade can transmit until the problem with compatibility

  problems with the software is fixed.

  Thank you

  I put this under the hardware and drivers, but it's a software problem. I'm always looking for another software that is compatible with my hard drives and the HP 3D DriveGuard.

  HP ENVY 17 Notebook PC

  Windows 7 Professional 64-bit Service Pack 1

  Intel Core i7-2820QM CPU @ 2.30 GHz

  Card system 159 b 91.33

  System BIOS F.08

  Hi Leonard,.

  Please contact Microsoft Community. I appreciate your efforts, I will surely help you.

  I suggest you read the article to know how to find Windows 10 drivers and software for my computer model on computer manufacturer site.

  http://support.HP.com/us-en/document/c04763435/

  You can also check if your computer meets the minimum system requirements to install Windows 10. For more information, see the article.

  http://www.Microsoft.com/en-us/Windows/Windows-10-specifications

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

• compatibility for windows 7 and the weather channel desktop application

  I tried to download the weather channel for my office application, but because I have windows 7, they are not compatible.  The Compatibility Wizard recommended I go to the XP version, but it did not work. While I tried to do it manually, when this does not work, I hit the Web, but apparently nobody had this problem but me.  This thing STINKS full compatibility!  Can anyone help?

  Hello

  What happens when you try to install the application by changing the level of compatibility to Windows XP mode? You receive an error message?

  Method 1: You can try to install the application at boot and check.

  Note: After installation, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: You can try to install the app to re download the app again.