Problems of compensation of a local register variable/shift

I have an indicator set up as a local variable (Test window) I clearly before starting a new test in the box flat sequence below but when it gets to the engine of the State, all data from previous tests (contained in the shift register) is then poured into the indicator.

The local variable (Test window) and the two locations of different memory of the shift register data are?

How can I clear the contents of the local variable (Test window) at the beginning of a new cycle of the engine condition and change it so that the registry change only contains data of a complete cycle of the state engine?

Thank you

Advertisement

robojeff wrote:

The local variable (Test window) and the two locations of different memory of the shift register data are?

Yes. The local variable 'points' to the command/indicator. Local variables are not supposed to be used for the storage of data, regardless of the fact that they are called "local variables". In your loop, you write the content of the register shift to the local variable. So you deal with two different "memories". Your shift register is not initialized, so she "remembers" the data on each race. You must initialize the registry in step with an empty string. Please read the help of LabVIEW on registers at offset.

Tags: NI Software

Similar Questions

  • create the simple register variable in Foglight 5.6.4 AND 5.5.8

    Hello

    is it a short and simple piece of code to simply create a register variable named "numero_fichier" with the value "60" in full?

    It's certainly very simple... but not for me ;)

    Thank you very much

    concerning

    VECD

    I just ran this script in the script console.

    He created the variable and filled both global default and extended by default to the integer value 60.

    varname = "numero_fichier";

    regValue = 60;

    topsvc = server.get ("TopologyService");

    type = topsvc.getType ("TopologyObject");

    Regsvc = server.get ("RegistryService");

    regsvc.createRegistryVariable (varname, java.lang.Integer)

    regsvc.saveRegistryValue (regsvc.createRegistryValue (varname, regValue));

  • The local Boolean Variable vs Boolean reference

    I always spent Boolean values through local variables, but I just came across a Subvi, which passes a Boolean reference that then feeds a property node that sets the property "Value" of the value Boolean false.  What are the benefits of using the reference like this instead of simply pass the Boolean value in and out of the sub - VI?  Thank you.

    Writing to the Value with a refnum property updates the value in the VI calling at this time rather than wait the Subvi in the end and update the results of the indicator.  I use them for simple façade, infrequent updates on one background Subvi when a queue or the Notifier is excessive.

    What do you mean by you always pass bool with local variables?

  • Problem event name: Blue Screen, locale ID: 1033

    Hello

    I have a HP Pavilion computer with windows vista home premium. The computer was working well, but for the last ten days, he began to be planted in the middle. When I try to start it, it is not able to boot and start in safe mode. I get the following problem description

    Problem event name: BlueScreen

    OS version: 6.0.6000.2.0.0.768.3

    Locale ID: 1033

    More info

    BCCode: 116

    BCP1: 8A36D008

    BCP2: 8DC9CF40

    Also sometimes when the computer starts in safe mode the screen is split horizontally two equal haves. I tried to restore the system to an earlier date when I have not had the problem and everything seems to work fine for a day or two, but again, the problem has started to come. Can someone help me please in the present.

    Thank you very much!

    Bug Check 0 x 116: VIDEO_TDR_ERROR

    This indicates that an attempt to reset display driver and recover a timeout failed.

    Update the drivers of graphics card, updating the BIOS and check the RAM for errors.

    In ADDITION, install the Vista Sp1 and Sp2, you always use Vista RTM!

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • I have a problem with debugging in a local development environment.

    I'm having a problem with my local development environment.

    I have version 10.3.5 WebLogic Server on my laptop and I am using Eclipse v3.8.1 as my IDE.

    I built a server in Eclipse, I imported a .war file and place the file properties to point to an Oracle database, not on my laptop.

    I built the project and added the server.

    But when I tried to start the server in debug mode I got this message. :

    Unable to connect to remote VM. Connection refused.     Connection refused: connect

    As the Weblogic Server is loaded on my laptop and I tried to run the server in the Eclipse Server view Debug

    Why it says "Failed to connect to remote virtual machine".

    Why he thinks I'm trying to debug remotely?

    I thought I was set up for local debugging:

    Hello

    To enable the debug option in Weblogic, please add the following lines (in bold print) to startWebLogic.cmd in bin directory - your domain

    Set JAVA_OPTIONS =-Xdebug - Xnoagent - Xrunjdwp: transport = dt_socket, address = 8453, server = y, suspend = n % SAVE_JAVA_OPTIONS %

    And in eclipse change port configuration debug as 8453.

    I hope this will work!

    Kind regards

    Prateek Gupta

  • problem with the type of local and global

    Hi the gems...

    I have a plsql package. In the package, I defined a proc that takes two input parameters of type simple number and a parameter of a type of output collection.

    create or replace package pack_1 as body
    procedure proc_1 (p_number1 in number, p_number2 number, p_tt_table to tt_table) as
    v_tt_table tt_table:=tt_table();
    type c_ref_cursor is ref_cursor;
    v_c_ref_cursor c_ref_cursor;
    v_sql varchar2 (20000): = < a large sql using bind variables p_number1 and p_number2 >

    Start
    Open the v_c_ref_cursor for v_sql using p_number1, p_number2;
    loop
    extract the v_c_ref_cursor in v_tt_table;
    When the output v_tt_table.count = 0;
    for idx in 1.v_tt_table.count
    loop
    < business logic >
    end of loop
    end loop;
    close v_c_ref_cursor;
    < excpetion_block >;
    end;

    < several codes for the rest of the package >



    When I execute the proc_1 then he throws me error of data type incosistent while to fetch the v_c_ref_cursor of cursor in the v_tt_table variable.
    ORA-00932: inconsistent data types: expected - was -.
    But I have checked that the output of the query is similar with the type of variable.

    Now, a few facts: the tt_table of the user-defined table type is made from ot_table (create or replace tt_table to ot_table Board).
    The parent type i.e. ot_table has the same columns of this query in v_sql my proc.
    The ot_table and the tt_table are global types.

    But when I did these two types as local types, then the proc works very well. But I need them as global types only according to the condition in java.

    Please help me. The database is 11 GR 2.

    Thanks in advance.

    user12780416 wrote:

    I'm trying to keep it in the simplest form... Please take a look...

    Ah... Easy to solve.

    The projection of SQL must be an object of type ot_test_type for extraction in bulk work.

    Your projection of SQL look like this:
    cursor c1 is select object_name from user_objects;

    object_name is a string - it is not of type ot_test_type.

    You must change the projection to return ot_test_type. This is done by using the default constructor for that type of object.

    For example
    cursor c1 is ot_test_type (object_name) select as the user_objects OBJECT;

    He may now be in bulk recovered in tt_test_type.

  • problem by setting the value of a variable substitution in a calc script

    Hi all.


    I'm trying to update the value of a variable substitution inside an IF statement, and I have a problem.

    Here is the code:


    * "Jan" (*) "
    IF (LoopCounter = 1) & varEntity = "100";
    ENDIF ;)

    the error that I get back from Regional service is:

    Error: 1200336 error analysis [Jan] (line 54) formula: [()] without [)]

    It's tricky. Without really analyzing the details of your example, two options that might be worth a visit:

    1. write a MaxL script for updating the subvar (s), and then run the calc, x 20. 40 lines of MaxL and 500 lines of code is 10 000. Obviously, this only works if the launch of the MaxL script is feasible, and you know that you aren't going to have multiple instances of the calc (or any what calc which depends on these subvars) running at the same time. But I guess you're OK with the last part, because even your original solution would have this problem
    2 hyperion Business Rules

    I know that CL knows a lot of HBR, if he is here today...

  • Problems using compensation in soa11g handler

    Dear all,

    I'm working on soa 11.1.1.3,

    I have problems to help compensate for the activity and also the Manager of compensation within a scope.

    From what I've read on the net, I think that its used to roll back a completed process.

    In my case, I'm a process call 1 to process 2 process 3 and if any one process fails, say process 3, so I want the restore process 3.

    within the scope of different, I put the entire process 3.

    Now, after the completion of the process of 3 I used a throw activity to raise an error just to check if offset rollsback process 3 or not (do back only 3 because 3 is a different scope and I use offset inside the Tote activity of the 3 process). But what I found was in the audit trail of the instance, the State of the process 3 is complete and it shows also an error has occurred.

    I thought that process3 would have been completely sustained roll and the audit trail would show information only until the process 2.

    am I goin wrong somewhere or I interpreted the wrong way!

    Any suggestion is welcome!


    Concerning
    Stone

    Hello

    Have a luk the link to understand the offset demo: http://www.scribd.com/doc/20681395/Compensate-Demo

  • Simple (?) problems with &amp; quot; IF &amp; quot; instructions and variables! Help, please...

    Nested in a couple of layers down in my film, I have a form with 2 fields and a check box and a submit button (the submit button is actually just a clip rather than any actual server-side).

    What I want TO ask you is for the clip NOT to play unless THE 3 elements have been 'used', that is to say: BOTH fields have SOME copy and for the check box.
    If all THE 3 criteria HAVE been met, so the video should play.

    Before we get to this form, 3 variables are assigned additional in the timeline, a couple of levels:
    step4a = "";
    step4b = "";
    step4e = 'off ';


    Back in my form, 2 blank fields have 'Var's called step4aName and step4bEmail.
    By clicking on the button box checkbox sets the step4e variable to 'on '.

    The following code is related to the Submit button:
    on (release) {}
    FIRST VARIABLE HAS THE VALUE FIELD FIRST MATCH
    _parent._parent.step4a = step4aName;
    SECOND VARIABLE HAS THE SECOND MATCH FIELD VALUE
    _parent._parent.step4b = step4bEmail;
    ORDERS OF TRACE FOR THE ERROR CHECKING
    trace ("step4a =" + _parent._parent.step4a);
    trace ("step4b =" + _parent._parent.step4b);
    trace ("step4e =" + _parent._parent.step4e);
    DON'T PLAY THAT CLIP IF THE TWO FIELDS ARE FILLED AND THE BOX IS CHECKED
    If ((_parent._parent.step4a! = "") & &)
    (_parent._parent.step4b! = "") & &
    (_parent._parent.step4e == "on")) {
    This.Play ();
    }
    }


    When I test the movie, I get the following output (which is what I expected, implying that everything is fine):
    step4a =
    step4b =
    step4e = off


    Now what happens when I run the present, it is that the clip will be, quite rightly, NOT play, if I just hit send without do something else first. But the problem comes when I ONLY check the check box and then click on submit, because then the FACT clip play, when he's NOT supposed to. Why? My two fields ARE still empty as prove it track orders that I issued when I hit the submit button - they say again:
    step4a =
    step4b =


    To further complicate things, if I AM typing something in the 2 fields, but I then delete what I typed, then the clip will be properly NOT play (with the check mark). The two issued variables still say:
    step4a =
    step4b =

    (And if I type text in 2 text fields, then 2 outlines variables IS updated to contain the text that corresponds to what I type in.)

    So according to the output that I see, how I put it together work SHOULD , but it's not.

    So to summarize, the problem is, if I LET my 2 fields completely empty, as it appears on the screen, then my error checking does not work.
    If I type something in my fields, then DO the virgins by deleting the text in there, then my work of error checking as it should.
    What is happening with this?

    Hi Brett, I don't know what version of flash/as (this applies only to later versions) you use, but you may first consider place this code in a keyframe on the timeline and use
    pathto.button.onRelease = function() {}
    code
    }
    and by changing your fields to a syntax that is similar.

    Possible your error checking does not work it is because NULL values and ' ' values differ... when the first load of the text box the value NULL is that no value has been entered. The process of adding text and removing leaves a value of ' '-c' is an empty string which meets your requirements.

    to resolve this problem, you could add NULL to your state of health, for example

    If (((_parent._parent.step4a! = "") OR (_parent._parent.step4a.) (= NULL))
    &&
    ((_parent._parent.step4b! = "") OR (_parent._parent.step4b.) (= NULL))
    &&
    (_parent._parent.step4e == "on"))

    or of course if you just use a newer version of flash test

    my_Text.length > 0

    I hope this helps

    Sam

  • install problem - c:\users\ &lt; NAME &gt; \appdata\local\temp\7zS171C.tmp\setup.exe the dependency service or group was able to start

    I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:

    I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:

    c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
    The dependency service or group could not start

    Any ideas?

    You may need to temporarily disable your security software (antivirus).

  • WLC5508 problem with dhcp and flexconnect local switching

    Hello
    I have a new WLC 5508 with firmware 8.0.133.0 (suggested one right now) and I'm trying to set up a WLAN with flexconnect and local switching, but when I try to connect a client it is not getting an IP address.

    Here's what I did:
    -put the AP mode flexconnect
    -support vlan in the AP has allowed
    -local switching license and only in wlan
    -spread the vlan from AP to the local gateway
    -put the IP helper on local and pointed the wlc management ip gateway
    -set up a scope for the vlan Server dhcp internal WLC
    -set up a working group with the vlan-wlan association flexconnect

    Here is what I checked:
    -l'AP obtains an IP address in dhcp in the vlan, and a lease for that appear in the DHCP Server internal to the WLC
    -If I put the interface vlan on a switch in DHCP it gets the ip address of the same way
    -If I set the static IP address in the wireless client it ping the local gateway and navigate normally
    -J' tried the deactivation/activation proxy DHCP in the management connected to the WLAN interface, but nothing happened
    -J' tried Central DHCP activation of treatment with no luck

    It seems a dhcpdump on the wireless client client ask for an IP address, but get no response, as if it were the DHCP request is be filtered or diverted somehow.

    All you other ideas?

    DHCP on the controller is not a real dhcp server, see it that way. The management interface is used when defining aid ip and proxy dhcp must be enabled for internal dhcp. In your configuration, dhcp only works for the AP and should not work for any cable customer. You should be able to use the IP helper pointing to your WLC management interface but also make sure that you create an interface on the WLC for the local subnet and assign the interface to a correct address, even if it is not actually using it. Then in the new dynamic interface of this local subnet, you create, make sure that the primary dhcp is the ip address of the controller management. I think it works.

    I would really use a true if possible dhcp server or even put a dhcp scope on the interface of L3 on the production site.

    -Scott

    Please evaluate the useful messages *.

  • Problem Cisco VPN Client with local authentication

    I configured PIX for the Cisco VPN client for remote access. It must be connected and also inside network is accessible. It is without any authentication username. It works well with a vpngroup name and the password for the vpngroup, configured on PIX and also on the Cisco VPN client. (version 4.6)

    When I configure crypto for local authentication, it did not work. configuration is as follows.

    #crypto card: name of the map of local authentication client

    I created a user with private = 15.

    Client VPN must be connected, and then it pops up a window user name and password. After giving these details. The user is not authenticated.

    Are there patterns more to do in / isakmp / ipsec / aaa configurations.

    Thank you

    AAA-server local LOCAL Protocol

    client authentication card crypto remote_vpn LOCAL

    client configuration address card crypto remote_vpn throw

    client configuration address card crypto remote_vpn answer

  • Problem with Javascript and ActionScript setting / getting variable timing

    Hello world

    The course

    I created a training course, which will run standalone on our intranet for internal staff. Despite the (known) limitations, I use Javascript to validate the form and open a window of e-mail, for the staff member to click Send confirm that they have completed the course. Without a web server or LMS to use, what seems easiest to obtain confirmation of completion of the course. The form itself works very well and we have tested it with some members of staff.

    I created a slide in Captivate that contains the form of confirmation with a "submit" button. I added a next button, which appears disabled until the user submits the form successfully.

    The problem

    When the user clicks on send, I call a conditional Action as follows:

    • If 1 = 1 (i.e. always do this)
      • Javascript call for:
        • Validate the form
        • If it is valid
          • Open e-mail window
          • Set m_VarHandle.Confirmation_Email = 1
    • If Confirmation_Email = 1
      • Select the next button

    Unfortunately, by filling out the form correctly and clicking on send, the next button is not enabled (the fine again active button). On further testing, it seems that the Javascript has finished running before ActionScript moves on the next decision. So when he checks the value of Confirmation_Email it has not yet been fixed and the next button is not enabled.

    Any ideas how I can fix this problem?

    Thank you

    Sarah.

    Hello world

    I bypassed this problem as follows.

    • Added a Clickbox that appears for 0.5 seconds with a break
    • Created a disabled button is visible in the output, which is displayed for 0.8 second
    • Updated the timeline, so that the next button (active) appears after 0.8 seconds for the rest of the slide
    • Added a second Clickbox located to 1.0 second with a break at the end of the slide (2.0 seconds)
    • Updated Javascript code to set cpCmndResume to 1 when the form is validated successfully

    This results in the desired behavior:

    • The slide plays up to 0.5 seconds and stops due to the first Clickbox
    • The user can fill out the form at their leisure and submit.
      • If the validation fails, the user must correct the form and click on submit
      • If the validation is successful, the reading recovery
    • When playback is resumed, he passes the 0.8-second mark. The following disabled button disappears and the next active button appears. Playback continues until the second 2.0 mark then paused because of the second Clickbox
    • The user can click on Next at their leisure

    Thanks for all the reading - hope it will be useful!

    See you soon

    Sarah.

  • printing problem in pdf and csv using bind variables

    Hello

    I created a simple sql statement using a query and bind variables. I noticed when I remove the bind variables and hardcode the values that the CSV/PDF links work. When I handed the return variables in the query, the WB shows "no data found" and pdf shows only the column header.

    If anyone can help me, I would be very happy!


    Thank you
    Ayed P.

    Hello

    How are set the bind variable? If there are topics evaluated by default on the elements of the page, so is not necessarily enough to ensure that the exports are their values. To set values, I tend to use calculations, conditional that the element is null, what works "Before Header". In this way, the value is stored in the session and is available for export. I think the defaults to be those that are defined when the page is submitted and are not available until now.

    Andy

  • Problem to fill the text box using variables

    What's wrong?

    When I run:

    import flash.events.Event;
    import flash.net.URLLoader;
    import flash.net.URLRequest;

    var i;
    var externalXML:XML;
    var loader: URLLoader = new URLLoader();
    var request: URLRequest = new URLRequest ("configuratie.xml");
    Loader.Load (request);
    loader.addEventListener (Event.COMPLETE, onComplete);

    function onComplete(event:Event):void
    {
    var loader: URLLoader = event.target as URLLoader;
    If (charger! = null)
    {
    externalXML = new XML (loader.data);
    for (i = 1; i < = 6; i ++) {}
    var movBV = "BV" + i;
    [movBV] vak.text = externalXML.blokveld .attribute ("our").
    }
    }
    on the other
    {
    trace ("XML Bestand niet found!");
    }
    }

    I get:

    1120: access of undefined property vak.
    [movBV] vak.text = externalXML.blokveld
    .attribute ("our").

    It works fine:
    movBV1.vak.text = externalXML.blokveld .attribute("producten");

    Your use of the table accessor syntax is incorrect. Notice the slight differences:

Maybe you are looking for

  • archiving of emails to an external hard drive

    I want to check the mails on an external hard drive. I would like to be able to change thispop3.live.com/Archives to this G:\Thunderbird archive\HOTMAIL mailbox:///C:/Users/joallaire/AppData/Roaming/Thunderbird/Profiles/qhvmdiq0.default/Mail/... Than

  • Sorting TV shows

    Hey guys,. Now, before you say go and look at the other posts on this subject, I. Only those who are between 2008 and 2010 so not helpful at all... I am unable to have my television appear like real TV series on the AppleTv instead decides to sort th

  • HP Envy 5540: HP Envy 5540 out of paper message

    I bought a printer ew Frys Electronics n.  I don't have to open the box and tries to use it for about a month.  It would not print from the computer, rather a post that it was paper.  I followed all the online and packaged suggestions for resolving t

  • HP Envy 23-c055 1.5 TB Hard Drive already has 5 PARTITIONS of HP! Why!

    I just got my HP envy 23-c055 and wants so far. I want to divide the main partition of C in 2DISQUES primary SCHOOL, but the 1.5 TB drive has already 5 partitions, so it is not possible. Why the @# $$ y 5 partitions already! They are. 1 hidden Recove

  • Having problems become waving Services start to work.

    I get the following message if displayed in a window BACK: node.js:205throw e; error process.nextTick, or "error" event on the first tick^Error: Cannot find module 'delayed stream.at Function._resolveFilename (module.js:318:11)at Function._load (modu


HashFlare