Problems of controller Ethernet T42 and network

Similar Questions

• Problems to controller Ethernet Intel X 540 - AT2 constantly AutoDetect portspeed 1 GB

  I'll implement to 6U1 ESXi on three Supermicro SYS-6018R-WTRT servers that come with the NIC of the controller Ethernet Intel X 540 - AT2. Unfortunately, the auto-negocie port speed is changing between 1000 MB and 100 MB, apparently at random. sometimes two vmnic adapters are recognized as 1000 MB, sometimes it is 1000 MB and the other to 100 MB, sometimes both are 100 Mb. the switch (Extreme Networks Summit X 350-48t) works fine for the other servers, gbit, although the supermicro servers are one with 10 GB cards.

  ESXi is the last level of patch with additional IGB driver vib installed v4.1.11:

  [root@endor1:~] esxcli list vib software | grep IGB

  NET-IGB 4.1.1.1 - 1OEM.550.0.0.1331820 Intel VMwareCertified 2015-12-15

  When manually deactivation/activation of the switch port, dmesg on esxi says:

  (2015 12-17 T 14: 47:25.871Z cpu8:33247) < 6 > 0000:01:00.1 ixgbe: vmnic1: NIC link is

  (2015 12-17 T 14: 47:25.871Z cpu8:33247) < 3 > IGB: vmnic1: ixgbe_watchdog_link_is_down: NIC ANC link is

  (2015 12-17 T 14: 48:29.571Z cpu14:33243) < 6 > 0000:01:00.1 ixgbe: vmnic1: NIC link is up to 100 Mbps, flow control: RX/TX

  (2015 12-17 T 14: 48:29.571Z cpu14:33243) < 3 > IGB: vmnic1: ixgbe_watchdog_link_is_up: NIC ANC liaison is established

  (2015 12-17 T 14: 48:29.905Z cpu11:32854) NetPort: 1780: disabled port 0 x 2000005

  (2015 12-17 T 14: 48:29.905Z cpu11:32854) Uplink: 7316: enabled port 0 x 2000005 with mac 00:25:90:f9:75:f3

  any advice is much appreciated.

  the extreme Summit X 350-48 networks seems incompatible with 10GE cards. swapped the switch for an FSL 648 Brocade and everything works fine.

• Problem renaming of data warehouses and networks

  I have recently upgraded a number of servers to ESX 4.1 to 5 ESXi and vCenter vCenter 4 5 and have noticed a problem. Whenever I have rename a data store or a network, the new name is added to the list of network or data store, but the old name is too present. In the past, if I had a data store and renamed her, I'd still only 1 ad for the renamed data store. With ESXi 5, I have two - the former name and the new name. It goes the same for networks. And they always appear in vCenter as being attached to the host. I tried to disconnect/reconnect vcenter, removing the host and add it again, restart the ESX host and always the old names appear.  If I look at the host through vShpere, everything seems OK with the renowned name 1.  But vCenter can't seem to let go of the old data store names and network.  Any ideas?

  I can't tell you for sure. This has to do with the return to a snapshot of the IMO. If you have a single host and back to a snapshot you will be logged out anyway (if the Group of ports of origin no longer exists). In a cluster, you will have the opportunity of the first migration/vMotion virtual computer to another host that maintains such a group of port before returning to a snapshot. As I said, just a thought.

  André

• Problems with the library items and network drives

  I was wondering if there are solutions to the following problem:
  
  I have directories on my laptop that I share through my local network.
  
  On another computer that is connected to the network, I have sites defined in Dreamweaver that point to these shared directories. Elements of model and the library will not update these sites. All sites that are defined on my local drive to update fine.
  
  Any suggestions / solutions are welcome. Thanks in advance. .

  I'm afraid that there are no options.

  The models folder must be at the root of the local site level.

  You can share local sites between several computers the (I do it
  often), but the only files that will be modified are those on the
  * real * local site. Or am I wrong interpret your question?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  'Mile High Design' wrote in message
  News:eb56ps$40U$1@forums. Macromedia.com...
  > I was wondering if there are solutions to the following problem:
  >
  > I have directories on my laptop that I share through my local
  > network.
  >
  > On another computer that is connected to the network, I defined sites
  > in
  > Dreamweaver that point to these shared directories. Library and
  > Model
  > Articles will not update these sites. All sites that are defined on my
  > local
  > update from the drive fine.
  >
  > Suggestions / solutions are welcome. Thanks in advance. .
  >

• Ethernet controllers and network does not work after reinstillation on Dell Inspiron mini.

  I don't know what to do. The computer that I'm not talking is not connect to internet at all. Whenever I am trying to reinstall the drivers, I get a message saying: it can't find the driver. I tried to download this from official website of intel and load it into my laptop via USB, and I get the message that no adapters intel are presnt. Take note of the fact that I am on the plan technology challanged and that it is probably just an id10t error. Please I really need help. It is also on Windows XP Home Edition.

  You must visit the support Dell for Inspiron model Web site. you will find the correct drivers for all your hardware, not just networking. You're probably missing other drivers too.

  http://www.Dell.com/support/home/us/en/19?c=us&l=en&s=DHS

  Enter your serial number is the way the fastest section pilots. Make sure you only select the XP operating system.

  Alternatively, you can have the CD of drivers supplied with your Dell printer. This should "autoplay" to help you to install all the necessary drivers also.

  Tricky

• Re: Problems of control Ethernet on Satellite L300D

  Hello guys,.

  Last month, my portable isacting crazy.
  Only randomly, it shuts down and tell me that something is wrong with the ethernet controldevice and I put in the startup disk.

  The strange thing is, when I restart the computer, everything seems fine, even Vista it self tells me that everything is turned on and properly installed.

  And the funny thing is when I bought my laptop weren't any CD that is next to it in the box... because everything was preinstalled. I only got this thing of recovery and a Partition with Vista on himself. But I don't know what to do.

  I hope you can help me with my problem.

  Greetz
  Marion

  Hello Marion

  New laptop models are supplied without CD/DVD media. Recovery image is recorded on the second partition of HARD drive. Toshiba has preinstalled small application called Toshiba recovery disc creator (the shortcut is placed on the desktop) and you should use this tool to create the installation of recovery disc.

  Please check this and create recovery DVDs using DVD-R media.

  To be honest I don't know what the problem with the Ethernet device and I can't say for sure why this happens. Are that updated Microsoft automatic set?
  As far as I know under optional updates often ranked driver for Ethernet device. This driver should not be updated or changed then maybe is this problem because of some update.

• Compaq Mini CQ10-525DX: lack of controller ethernet drivers, network controller, pci device and video controller for windows 7

  I need the driver for ethernet controller and network controller driver, driver pci device video controller for Windows 7 Home Premium 64 bit driver

  Someone please help

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_5288 & CC_FF0000
  PCI\VEN_10EC & DEV_5288 & CC_FF00

  PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C & REV_00
  PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C
  PCI\VEN_8086 & DEV_A012 & CC_038000
  PCI\VEN_8086 & DEV_A012 & CC_0380

  Hello:

  See if these drivers work...

  PCI\VEN_10EC & DEV_8136:

  This package contains the driver for the Realtek NIC installation files in the notebook models and operating systems.

  File name: sp49600.exe

  PCI\VEN_14E4 & DEV_4727:

  FTP://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

  PCI\VEN_10EC & DEV_5288:

  This package contains the installation files for driver for the Realtek card reader for laptops models and operating systems.

  File name: sp49599.exe

  PCI\VEN_8086 & DEV_A012:

  https://Downloadcenter.Intel.com/download/19493/Intel-Graphics-Media-Accelerator-3150-driver-for-Windows-7-64-bit

• Driver Ethernet controller and network installation

  I am a newbie, please help for the driver Ethernet controller and network installation

  product - portable r007tx

  OS - window7 64 bit

  -> error code realtech controller network not found... If hibernation is enabled, connect the cable

  unknown device device info Manager

  (1) ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2212103C & REV_07

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2212103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  (2) network controller

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3290 & CC_028000

  PCI\VEN_1814 & DEV_3290 & CC_0280

  (3) pci device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_2212103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_2212103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Hello:

  First install the Intel chipset driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127815-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• I need help with my controller Ethernet Controller &amp; network

  Hi I have a HP laptop model HP 2000_329wm I downloaded Windows 7 fresh operating system now that I've done that I'm missing my Ethernet controller and network controller drivers.please if you could help me with this problem I would be very grateful. the hardware ID is controller net is: pci\ven_10ec & dev_8136 & subsys_3577103c & rev_05
  the network controller is
  Pci\ven_1814 & dev_5390 & subsys_1636103c & rev_00.

  Hello:

  Here are links to the drivers you need:

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93650-1&cc=us&DLC=en&LC=en&OS=4063&product=5158888&sw_lang=

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111718-1&cc=us&DLC=en&LC=en&OS=4063&product=5158888&sw_lang=

• Satellite Pro A120 - drivers need for ethernet and network

  I rebulit a Toshiba Satellite Pro A120 (PSAC1E) with XP pro and I'm having a hard time finding drivers for the * Ethernet controller * and * network controller *.

  I downloaded all the drivers available from the site Web of Toshiba and installed these LAN and WIFI still do not work, I downloaded Intel drivers also and they have also failed to get the devices to work.

  Does anyone have a possible solution for me?

  Try the drivers from the Toshiba site and there you can also download the installation instructions:

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• PCI devices and network controller

  Can Hi anyone say about hoe to install PCI device driver and network controller Please that these two devices is marked with a? in the windows device drivers
  Thank you

  Hello

  If you have a problem, it will be very useful if you can write us which model of laptop you have.

  Please check the download from Toshiba site. You will find all the drivers that must be installed. If the unit is not old, you will find an installation manual and order of the facilities. If you are not able to identify hardware, please write again.

  Good bye

• Generic adapter Bluetooth is not working properly and network controller has no driver

  I use the version ultimate windows 7 in my computer dell laptop inspiron n5110.

  After reloading the OS, I started to deal with the following issues:
  
  
  Generic adapter Bluetooth is not working properly
  Windows has detected a problem with the generic Bluetooth adapter.

  The device information: generic Bluetooth adapter

  ID: USB\VID_0CF3 & PID_3002\6 & 58952F4 & 0 & 4

  Error code: 43

  Network controller is not a driver

  There is no driver installed for the network controller.

  Name: Network controller

  ID: PCI\VEN_168C & DEV_002B & \001517FFFF24141200 SUBSYS_02051028 & REV_01

  Error code: 28

  You will need to download and install the drivers from here:

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-15R-n5110

  Choose 32-bit or 64-bit, depending on what you have.

  SC Tom

• Can I plug two Airport Express units with ethernet cord and have a third Airport Express Terminal receive airplay music wirelesslly? In other words, can I combine a Wi - Fi network and roaming?

  I have an undesirable on the 1st floor, connected to the cable modem Ethernet event. I want to connect that AE to an another AE on 2nd floor with ethernet cable AND have a 3rd AE on the 1st floor to receive music through AirPlay wireless. I thought that linking the two first AEs with ethernet would improve the performance of web site on my iMac desktop, which is on the 2nd floor and connects to the 2nd floor AE via wifi. The EI the first two are newer model (MC414LL/A); the 3rd AE is old model (MB321LL/A) and is connected to a stereo Bose with a mini-jack to RCA cable double cord. I tried to set up this network using AirPort Utility, but have had no success. I don't know if it is possible to do what I want to do; and if this is the case, I don't know how to set the various parameters for each AE using AirPort Utility. I've temporarily implemented a purely wireless network; Do not connect DO NOT the two AEs with ethernet and everything works. I would enjoy my plan as above, or if I hold with purely network wireless. Any help would be greatly appreciated.

  Using ethernet network roaming between the two floors is a much better idea than anything wireless.

  The installation should be automagical if you start with the two AE plugged in by ethernet.

  It must be configured in standard roaming with identical names wireless.

  If you have any questions... Please, just after the airport utility screenshots of the configuration... but

  An express train is probably the router? You must confirm this.

  The second express is so configured in bridge... It's on the network tab, disable the bridge mode.

  

  Without thread is set to create a wireless network and simply use the same name and the same password as the other Express.

  As it should be automagical when you WAN on the second AE plugged into the LAN on the first AE.

  Wireless and then extend to will also be installed enough well automatically even if sometimes it works better in a client that extend wireless mode.

  See the Client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

• Pavilion Notebook 15-ab216nz: bus controller driver series universal (usb) and network controller

  I'm looking for a (usb) universal serial bus controller driver for my Pavilion for computer laptop 15-ab216nz as well as the network controller

  Hello:

  For the usb controller, download, unzip and run the file setup.exe from the link below.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

  There is no information online on what model of card wireless (network controller) of your laptop is.

  Thank you for posting material ID for the network controller, so I know what model wireless card it is and then I'll post the link for the driver, you need to.

  To find the hardware ID, go to the Device Manager and click on the network controller who need the driver.

  Then click on the Details tab in the upper part of the window network controller.

  Now you will see a drop-down list of property and it will be set to the Description of the unit.

  On this list and select the 2nd (Hardware ID).

  After the first string of characters you see in the window.

• Ethernet and Ethernet settings under network settings?

  Noticed that Gray was Ethernet and Ethernet settings under network settings and wireless.

  I was wondering not if that was supposed to be used for something else.

  It is used if you are using a lapdock or dock HD that you can connect a USB Dongle for ethernet and option.

  Mark

  Support Forums Manager