Problems of Driver ICD-520

Similar Questions

• Satellite Pro L300 - 'problem adapter - driver not installed.

  I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

  If you can help I would be very grateful.

  I went to Accessories - system information and here is the result:
  Connection TV/video Microsoft name [00000001]
  Card type not available
  Connection TV/video Microsoft product Type
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 1
  Service name NdisIP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000003] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 3
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

  Name [00000004] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 4
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

  Name [00000005] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 5
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

  Name [00000006] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 6
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

  Name [00000007] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 7
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

  Name [00000008] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  8 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address A4:3E:20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000009] Realtek PCIe FE Family Controller
  Adapter Type Ethernet 802.3
  Product Type Realtek PCIe FE Family Controller
  Installed Yes
  PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
  Last reset 10/05/2012 07:09
  Index 9
  RTLE8023xp service name
  The 0.0.0.0 IP address
  IP subnet
  Default IP gateway not available
  Active Yes DHCP
  255.255.255.255 DHCP server
  DHCP lease expires 21/03/2012 13:23
  DHCP lease obtained 21/03/2012 12:23
  MAC address 00:1E:33:3F:0 D: 3RD
  IO port 0 x 00003000-0x00004FFF
  0xD0010000-0xD0010FFF memory address
  0xD0000000-0xD10FFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

  Name [00000010] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 10
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:1E:33:3F:0 D: 3RD
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000011] wireless intermediate driver
  Adapter Type Ethernet 802.3
  Product Type Wireless intermediate driver
  Installed Yes
  ROOT\WSIMDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  11 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

  Name [00000012] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0002 PNP device ID
  Last reset 10/05/2012 07:09
  12 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Adapter Type Ethernet 802.3
  Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Installed Yes
  USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 16
  Service name RTL8187B
  10.1.1.4 IP address
  255.0.0.0 subnet IP
  Gateway IP 10.1.1.1
  Active Yes DHCP
  10.1.1.1 DHCP server
  DHCP lease expires on 10/05/2012 08:10
  DHCP lease obtained 10/05/2012 07:10
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

  Thank you!!!

  Can you please open device manager and check if this is some unknown device listed?

  By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

• Sony digital voice recorder ICD 520, windows 7

  Can someone point me to a solution using a digital voice recorder Sony icd 520 with windows 7, is there driver for this patch?

  Hi joescrim,

  I found the following link on the Sony site with necessary additional software/information on what makes your compatible devices:

  http://support.Sony-Europe.com/DNA/compatibility/Win7/dna_win7.aspx?site=odw_en_GB&m=ICD-P520

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Placa wifi miniport virtual da microsoft tem um problema num driver

  Placa wifi miniport virtual da microsoft tem um problema num driver, como posso'll?
  ASUS X52J
  Obrigado

  Hello

  You posted on a forum for English language. Please choose your preferred language in the link at the bottom of this page.  English 

  http://answers.Microsoft.com/en-us/Windows/Forum?tab=all

  See other options of support for many regions and languages here:

  http://support.Microsoft.com/common/international.aspx

  Don

  - - - - -

  [Portuguese]

  Voce em um idioma Inglés forum go. Por favor, selecione o idioma preferido has go link na parte inferior desta page.  English 

  http://answers.Microsoft.com/en-us/Windows/Forum?tab=all

  Veja other suporte para many regioes may e idiomas aqui:

  http://support.Microsoft.com/common/international.aspx

• WAN miniport (ATW) #2 has a driver problem. Driver should be replaced.

  I get the message: miniport Wan WAN (ATW) #2 has a driver problem.  Driver should be replaced.  This device cannot start (code 10)

  Hello

  1. which version of the windows operating system is installed in the computer?

  2 did you change on your computer?

  Method 1:

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2:

  If your operating system is windows 7, I suggest you run the fix it tool and check.

  Hardware devices do not work or are not detected in Windows FIX IT:

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 3:

  I suggest update you also the drivers and check.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  What to do when a device is not installed correctly:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

• Installed XP Pro SP3... Now my dvd player does not Sleep in my computer and does not appear to exist? I have no filters in regedit, it isn't a problem of drive letter, model acts as reader's not here yet. No driver for it, as this is the firmware

  DVD/cd burner no longer works. Instlled SP3, no computer behaves as it is not yet connected.  No reader, its firmware.  No filter I know cuttin git.  Not a problem of drive letter, carries the reader will not be open yet.

  Hello Justuslonginus,

  Thank you for your message.  What is the brand of your computer?  It could be that your computer manufacturer has a required update before installing SP3.  You should check with them before moving to the next steps.  After checking with you computer manufacturer, try to run the new hardware wizard to scan.  The instructions are below:
  Click "Start" > click on "Control Panel" > double-click "Add Hardware".
  Answer that the device is already connected and allow the system to scan.
  If your system has not yet found your drive.  Then we can remove SP3 to see if it was the culprit.  Click HERE for instructions to remove the SP3.
  Please let us know if it did or did not help to resolve this problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• problem with drive Intel HD 520 - bad resolution

  Hello

  I bought the HP Pavilion 13-s104ne model and I am facing problem with the resolution.

  some msg boxes are not clear, it looks like to scanned box, I am really very angry about this and I need a solution...
  I tried to unstall and install the driver but nothing changed...

  Please help me

  Medhat

  medmarai

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about resolution issues and wanted to help.

  Since it is a machine relatively new, instead of hurt for hours to fix yourself, why not just let HP fix it - for free!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• P1C61EA #ABZ: problem Audio (driver?)

  Hi, yesterday I updated to W10 anniversary. After that, my PC has a lot of audio problems, include the bass too metallic. So after reading in this forum I've updated the driver (sp74867), but doesn't my audio control (F6 key on the keyboard) and the volume is too low. When I restart my laptop updated driver disappears, with the previous one, with all the problems.

  I also tried, without success, the Windows troubleshooting tool, but nothing.

  What can I do?

  Thanks to advice.

  Andrea

  Hello

  Try download and install the package of audio software on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp77501-78000/sp77787.exe

  Kind regards

  DP - K

• HP Designjet 500 42: Old problem of driver update

  Hello

  I have HP Designjet 500 printer 42 in. And I can't update the old drivers. I downloaded new drivers drivers

  Installed new drivers and the printer connected to the computer. Installed printer itself. Driver version but check it shows in 6.08 (preferably printer-> subject) window.

  I deleted all drivers using pnputil.exe d Oem # .inf and printui/s/T2 orders. All the drivers of HP has been removed from

  C:\Windows\System32\DriverStore\FileRepository

  and

  C:\Windows\System32\spool\drivers\x64\3

  Installed new drivers (8.10) and pluged in the printer. Printer has been installed but with drivers 6.08. So I went to the "print management" as an administrator. Pressed on HP Designjet 500 42 by HP printer 'Manage sharing'-> "Advansed"-> "New driver"-> 'Disc' and in C:\Windows\System32\DriverStore\FileRepository I chose "dsgj510.inf_amd64_* *" folder and the dsgj510.inf file here. But could not find "HP Designjet 500 printer 42 in.". Here only:

  HP Designjet 500 42 + HPGL2 card; HP Designjet 500 plus 42; HP Designjet 500ps plus 42; HP Designjet 500PS42 + HPGL2 card; HP Designjet 510 42 inch printer and HP Designjet 510ps 42-inch printer.

  I tried to use HP Designjet 500 42 + HPGL2 card HP Designjet 500 plus 42 drivers. But printer would give an error message and do not print.

  With the help of the 6.08 driver version I can print from some software, but I need to print from AutoCAD. And AutoCAD gives me the error message "no: cannot use this configuration of tracer for one of the following reasons: the driver is not found, cannot find the device or the driver has a problem." No device has been substituted. "And I can't choose the HP designjet 500 printer in AutoCAD.

  It is a shared printer and other computers on the network have 8.10 drivers and can print from AutoCAD. Single computer, the printer is pluged cannot print because it driver 6.08.

  I found the problem.

  On the page under 10 64-bit windows this is only "HP Designjet 500 and 510 HP-GL/2 and HP RTL driver 64 bit" 8.10 drivers. And this driver is not HP Designjet 500 printer 42-inch drivers. But under 64-bit windows 8, here's two pilots. "Driver HP DesignJet 500 PCL3GUI 64-bit" 8.10 drivers and same as above. This file have drivers for HP Designjet 500 printer 42 inches and runs under windows 10.

  If HP support lazy to put all work them drivers under windows 10 for HP Designjet 500 printer.

• Satellite P300D-13N and Installation of XP problems (Sata driver)

  Hello

  I have some problems with my XP Downgrade.
  I tried to integrate the Intel Storage Manager driver in my XP CD, but unfortunately it did not work.
  Probably because I've been incorporating all THE drivers, who were available, not only who should work for my chipset.
  Anyway, in one of the threads of this forum, there is a link to [THIS how-to | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] and I think I found my problem...

  [Here: http://s5.directupload.net/images/080904/2eptrpzs.jpg] is a screenshot of my (sorry to make it in German) Device Manager preinstalled Vista.
  As you can see, there is no information about the Version of controller.

  So my question is, WHAT chipset is built into my laptop, because it is due to the fact that Intel drivers do not work AND there is no information on any Intel-inverter speed, I have no idea, I have to integrate into the XP CD to get my XP Installation working drivers. :(

  Help :(

  Thank you

  Laptop: Satellite P300D-13N PSPDCE

  Hello

  According to the specifications of the laptop, your laptop has an AMD RX780M chipset. Processor is AMD Turion Dual Core RM - 70 (2.0 GHz).

  I hope this info will help you.

  Good bye

• HP 255 G4: Problem with Driver Usb

  Hi, I have a problem with my HP laptop. Two usb ports do not work because it is not the correct driver.

  Help, please!

  [Personal information]

  Product: M9T13EA #ABZ

  Good bye

  This problem is really stubborn...

  OK, time to pull out the artillery heavy.

  Download and install both of these drivers and reboot and see if that takes care of the issue.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834528 & swItemId = ob_154066_1 & swEnvOid = 4059

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835 & swItemId = ob_133037_1 & swEnvOid = 4059 #tab1

• Satellite R630 - problems of Driver on Win 7 64 bit after SP1 update

  That need your help here guys.

  My R - 630 Satellite is less than a year, under a Windows 7 Home Premium 64 - bit. For awhile, I've known BSOD, which I traced him through the observer of events here: http://technet.microsoft.com/en-us/library/dd337789 (WS.10) .aspx

  This has not led me far enough.
  Finally, I have found through other forums that the SP1 update would solve some of the annoying problems BSOD and I started the download and upgrade. However, when the computer reboots, while my laptop seems to have been healed (so far) of the BSOD, I have problems with drivers for:

  -Sound card
  -USB controllers
  -DVD player
  -Webcam
  -Bus enumerators

  I downloaded the indicated Win 7-64 bit drivers in each case. I tried to install the first. Nothing happened. I uninstalled the existing and installed new drivers. Nothing happened again.

  I thought I should do things in the right order.
  So I tried to install
  (1) the Chip Set Utility (drivers?) first, then
  (2) the USB drivers
  (3) sound card drivers etc.

  Nothing happens not always.

  I'm running out of ideas here.

  PS while other drivers run very well when I extracted the .zip format, the sound card driver, refused to run, even if the box "run command" has been checked when executing the .msi file.
  I've pulled into a folder and ran it manually.

  Still did not help.

  Hello

  What happens if you set the Windows operating system to the point before the SP1 has been installed?
  That you get the BSOD?

  I would recommend this doing.
  Use the Windows option that allows you to activate the operating system at the point of time at the beginning.
  Then, test the functionality of the OS.

  If everything works correctly, update the Win 7 64 bit with SP1.
  You must use the automatic update of Windows 7.

• Satellite C850 - problem with driver AMD/ATI GPU

  Windows Action Center lists these 2 problems but no fix available as not connected to the internet. I am connected to the internet. I downloaded the latest driver from AMD, but the problem persists.
  Can someone tell me what to do?
  Also, when I go to Toshiba support there is a new BIOS, new driver WLAN etc., how can I know which of these I should install?
  Thank you
  Adbears

  The computer is a C850, Windows 7, 64 bit.

• Problem creating drive recovery for Satellite L550-10N

  Hello.

  I just bought a L550-10N and the first thing I tried to do is to create recovery discs using the Toshiba recovery disc creator.

  Everything went well on the first creation of disc (4 must be created).
  The problem starts with the second disk: about when it's half burned, decisions of the gauge, the DVD drive continues to function for hours and never stops.

  I tried the process again, but it was exactly the same.

  Anyone an idea how to solve this problem?

  Thank you!

  According to my experience, the best thing you can do is to create a recovery media using DVD-R virgins.
  I have created for several different models of laptops using TDK or Verbatim DVD-R media, and every time everything was fine.

• Possible problem HARD drive - by clicking on the sound and the system hangs on Qosmio G30 - 116

  Hello

  I just got my G30-116 return of service (replacement of the screen) and after 2 days another problem. He just continues to hang out.

  I do not change a thing since I got it and now it just stop working on things sometimes like browsing the internet. It has not happened before. And my biggest concern is the trigger that made my hard drive.

  What can be wrong? It not crash until I have it sent to the service, I think that my hard drive is defective... Thank you

  What to say? If you can not find out why freeze the problem occurs, try to preinstall the operating system with recovery DVDs delivered.

  In any case, from your description, I'm afraid there is a serious problem with HARD drive and it can be simply worse then now. Please be sure that your data is backed up.

  Please contact service again and explain the situation. If the HARD drive is faulty, you will get a new, and if they have the HARD drive on stock, it can be replaced very quickly. G30 is lovely and I hope that you will be satisfied. A few days ago my friend visited me and we have tested his G30 with HD-DVD player on my LCD TV. I can tell you one thing: I am really impressed with the HD picture quality.

  Good luck!