problems of gps and wifi iPhone 6 9.2

My iphone 6 does not connect to the wifi unless it is less than 5 feet from the router and the GPS can't find my spot.  This has happened since Apple updated the software around the release of the 6s.

None of the versions subsequent correction of the problem, nor has any troubleshooting discussed in online forums, proposed by technicians apple or carried out by technicians from apple to the store.

My phone is a few months after its warranty (how convenient for apple) and they would not replace it without paying me $ 280 to do.

I am a few months since my full upgrade with Verizon, but the lack of GPS and wifi not connecting not caused much frustration and data usage, which was costing money because it does not connect to wifi when the fact of other devices in my apartment.

This is one of the worst customer experiences I've had with apple.  I'm on the edge of Verizon plan, which allows me to update when I want if I don't care keep my phone or get money to trade it.  I'm two months from own the phone outright, but I will probably go to a Samsung better buy a promotion gift card $ 150 to go to Samsung and trade in my iPhone.  I'm an advocate of Apple for a long time, but clearly widespread lack of solution to this problem is not a good look for a company that built themselves on the convenience and simplicity.

After two months of headaches, I feel like it's worth to wait until March and I should not have to this fact.

You have a question or you did he yell?

Tags: iPhone

Similar Questions

  • Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

    Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

    kenka433 wrote:

    Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

    Canon 6 d has a full frame, GPS and WiFi sensor and can be opertated in LiveView mode mirrorless.

  • Support to properties of the device - GPS and WIFI

    Hello, I am developing an application and I would be taking in charge all models of devices with gps and wifi support. Is it possible to get information, if the device supports GPS and Wifi?

    What devices is touch screen, there is a class touch screen and an isSupported() method, which returns false, if the touch screen is not supported on the device. Is there a similar method for Gps and Wifi, too? I searched the web, but I can't find anything about this and I think that's not good filter device names to determine if the application should run or not. I would appreciate a quick response time to the app's short... Thanks in advance.

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/832062/How_To _...

    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=5752&query.ID=161...

  • Poor quality of GPS and WiFi reception, iPhone 6

    I can't use applications that use GPS, maps, waze.

    My iPhone cannot connect to wifi which are more than 10 meters.

    I restored network settings did not work.

    I restored to factory settings, none worked.

    This phone was purchased in October to November 2014 2015 has worked well

    What should I do to fix this?

    IPhone 6, iOS 9.2

    I'm having the same problem. Same phone, same age of phone.same symptoms.

  • GPS and Wifi issues

    Hey guys I wanted to do and take into account and post this question because it affects my Pokemon catch capacity:

    My GPS just do not work with precision and not enough fast. I noticed about a year ago when I tried to use the WAZE app for the first time and it does not locate my position accurately enough and it's the same for Apple and Google maps.

    I've never really cared because I rarely travel too far and my GPS worked well enough for me to navigate when I should not rely on a map. Now that Pokémon GO is out which relies on positioning very accurate since some Pokemon can only be captured in some areas, it is really annoying that my phone takes a lot of time to put me in a general situation or fails to find me at all. I know it's just a game, but it's really annoying because it's the first week of release, and all my friends are playing. Seems my GPS only works pretty well to play when I'm more urban areas in my city (perhaps the buildings help focus signals on my phone) compared to parks and suburban more areas. The phone would make my position in the game by tens of metres offshore and sometimes would be me all about teleport to another whole BLOCK!

    I think it may be a hardware problem because I also noticed that my phone started to worsen to pick up WIFI signals as well. I use to be able to walk my business and maintain a good WIFI signal and now it seems that I can hardly connect to my router unless I'm less than 10 feet of it. Around, I read that this could be a short film of either a bad charging cable, damaged by the heat that damage the WIFI and GPS, modules or an update that fried partial systems.

    I checked my router with the new iPhone of others and they had really good reception of the WIFI signal like what I had at first, that's why I think it's a hardware problem. I did a reset, full location Services are on and I tried every solution developers Pokémon GO suggested. While I'm due for an upgrade to another phone soon, being is not able to play with friends and walk around looking for Pokemon cool is a disappointment.

    Any suggestions or ideas on what could be the problem? I even tried to piggy back wifi hotspot a friend to see if I can use their GPS location. No luck.

    Hi FunnyAsianBoy,

    I'm not sure what you mean by "full reset", maybe you have already done this:

    If you want to know for sure if it's a hardware problem, here's what you can do:

    1. backup of the device, of course.

    2 replace the device to its factory settings using iTunes (contrary to "erase all content and settings ' application of the parameters, this will completely erase your phone, operating system included). Instructions: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support

    3. DO NOT restore from a backup. Set the device up like new. If the WIFI problem is still there (and you have restarted your router at least once), there is a hardware problem. If the GPS problem is still there, but only on cell systems, I'd want to put your SIM card in another phone with the same provider (or put another SIM with the same provider in your phone) to isolate the problem.

    Alternatively, you can call Apple support so that you have access to a Wi - Fi connection. They have a diagnostic test of the material that they can do remotely, and they will do it for free. Of course, it is not as reliable as if you physically go to an Apple Store, but it is very convenient as you can do from anywhere.

    I hope this helps!

    Bakhtina

  • Laptop HP 15-go99er: problem with network and WiFi

    Hey guys,.

    Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

    "Network controller"

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
    PCI\VEN_168C & DEV_0036 & CC_028000
    PCI\VEN_168C & DEV_0036 & CC_0280

    ""PCI Device"

    PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
    PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
    PCI\VEN_1022 & DEV_1537 & CC_108000
    PCI\VEN_1022 & DEV_1537 & CC_1080

    Can anyone help, because I can't seem to find the proper drivers.

    Hello:

    For the wireless card, this driver should work...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

    For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

    If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

    Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

  • Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

    After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

    -By doing a reset network

    -Do a reset total and restore my phone

    -To restart my phone twice.

    -Audit and third-party applications unnistalling

    Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

    Please fix bugs fast.

    Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

  • I have SE phone BT and WiFi problems

    2 questions

    Voice of BT in car quality is terrible with the phone SE - not like that on old 6s I sold to buy this phone.

    Just noticed that the WIFI icon has disappeared!  Despite the detection network WIFI with excellent signal strength and network selected checked the actual signal is not there - it is always in the upper left corner of any I phone that I had previousdly not there now!  I think that it is connected OK as connection is faster than the 3G or 4 G-

    Someone at - it an idea of what is the problem and how to sort for BT and WIFI?

    Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

    1. Check if the problem is related to a single device and if other devices connect normally-
    2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
    3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
    4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
    5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
    6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
    7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
    8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
    9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

    For Bluetooth

    1. If the pencil of Apple is connected - "Forget it" and try again
    2. Control Center - tap bluetooth and turn it on again - 8 - 10 times
    3. Force restart the iPhone
    4. Update to the latest iOS if not done
  • I recently updated my iPhone to iOS 9.3 6s and now my data and wifi are in place. Now I can't open the apps and send messages with data and barely on the wifi. I've tried everything, and it still does not work.

    I updated my iPhone to iOS 9.3 6s today and now my data and wifi are in place. Whenever I try to open an app or send text messages with data it does not at all. And with wifi, it just works. I tried just like turn roaming off and off and other lte but nothing seems to work at all. Can someone please?

    I have this same problem too, it really gets me upset

  • ICloud photo library - double images and memory iPhone 5 c problem

    Hello

    After months of deliberation, I decided to convert my Aperture on Mac in photo library and link the family three iPads and my iPhone to iCloud photos. I made sure all software updates have been installed on all devices, including the Mac. After 22 days of continuous download, I have now all the pictures in the clouds!

    However I have 2 problems. My 30 k + original images expanded to 40 k + with thousands of duplicates and my iPhone 5 c memory (8 GB - what a mistake!) is now full and I cannot take photos more or update applications on it. I guess that duplicates are albums on iPads.

    Before I converted, I checked and the documentation stated that the Photos would be recognition of duplicates and not replicate in the cloud. I also checked the box to optimize the images on my iPad and iPhone not realizing that even with the optimization of the paltry memory on the 5 c would be totally inadequate - the iPad is very good.

    Now I have more documented and install PhotoSweeper on the Mac seems a possible solution to the problem in double - the alternative is to go through each image!

    Re the problem of the iPhone, the only solution I see is to stop the iCloud photo library on the phone and then remove the images on the phone. Who will free the memory, and I will then be able to take pictures I have to take pictures by other means. It's not ideal for a functioning flawlessly, but when my contract is up this summer the next phone will be a greater amount of memory and hope it will be seamless!

    Any advice please before going further?

    Photo Sweeper is a good package and works well and is course - so are duplicate Annihilator for Photos and PowerPhotos

    You could try turning off ICPL on the small phone, cleaning of duplicates and leaving all s = complete uploads and downloads and stabilize and they new the on with photos on the iPhone - optimized it can handle then - worth a try

    LN

  • I have problems of space on my iPhone 6. I have only 21 photos and 2 videos on my phone. However, I am on a discussion group on whatsapp. How can I create more space for my phone? I also have very few applications on my phone.

    I have problems of space on my iPhone 6, I have only 21 photos and 2 videos on my phone. However, I am part of a chart group on whatsapp. The problem now is that my storage space is almost full. How can I create more space for photos and everything?

    You cannot create more space for everything.  All you can do is remove apps, photos and especially videos to make room for other pictures and videos.

  • My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

    My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

    Settings > messages > iMessage turn off then turn it back on...

    If it does not sign of your apple under messages ID.  Settings > General > reset > reset all settings (will not erase data).

    Then log in messages

  • Mac and favorite iphone wifi

    Hello

    I'm finding that my macbook air and my iPhone 6 are mirrored between them when it is preferably WiFi. for example, in my office, I have a network of the most convenient airport. Only, I connect my mb Air to this network. My phone, I use my entire home network. A few weeks ago I noticed that my phone was still using the Airport Office as its preferred network (which does not work well in the rest of the House). I told my phone to forget the airport network, which in turn my mac will forget too, that I don't want to happen. It seems to be something to attach the 2 devices via iCloud.

    Any advice would be helpful.

    Hello dtsagent2,

    Thank you for using communities of Apple Support.

    I see that your iPhone and MacBook share the login information for your Wi - Fi networks. You are right in your suspicions that there is something "attach" devices. It is the iCloud keychain. Both devices will share information about the network connections (among others), that's why when you 'forget' a network on a device, the other will also be "forget." Unfortunately, iCloud Keychain is a proposal of 'all or nothing', you cannot select pieces that synchronize between the two. For more information on iCloud keychain.

    Frequently asked questions about iCloud keychain

    Get help using iCloud keychain

    Best regards

  • is there a problem with vista and microsoft wifi?

    last week, I was on the internet with my router (belkin) wireless and all the sudden it stopped working. Only works in the same room. A computer in the shop and the tech claims that it was a matter of microsoft with vista and wifi. Is this true? She said I could either adjust the settings of the router with manfactur of the router or the upgrade to windows 7!

    Hello

    1. did you of recent changes on the computer?

    You can try to reset TCP/IP and Winsock.

    a. Click Start and type cmd in the start search box.

    b. in the list programs, right-click on cmd and select run as administrator.

    c. type netsh winsock reset at the command prompt and press the Enter key.

    d. do the same process to refresh the TCP/IP just replace the command typed with

    netsh interface ipv4 reset press enter

    netsh interface ipv6 reset press enter

    ipconfig/flushdns, press enter

    e. restart your computer.

    How to reset the Protocol Internet (TCP/IP)

    How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

    You can also check the following items and see if it helps:

    In the Windows wireless network connection problems

    Solve problems, find wireless networks

    Hope this information is useful.

  • Problems with DeskJet 460 (WiFi) and Windows 7 (x 64)

    I was able to configure my DeskJet 460 with my laptop running Windows 7 64 bit, but I encountered some problems:

    Of course, there is no Windows 7 HP Toolbox, so I went in the printer properties in hopes of using the printer services tab to align the print heads after installing new cartridges, but while the printer services tab is there, there is no button or anything at all.  So, how to align the print heads?

    The other issue has to do with the evolution of my printer WiFi card so that I can put its IP address manually.  Usually, I could do that through box HP Toolbox, but since my upgrade to Vista x 64, this isn't an option.  Is there another way to get around this?  I don't know, but I recall being able to use my browser and simply type the IP address of the printer as I can with my C7180 but it did not work, even if the Wireless Setup page gave me the IP address.

    I did a test print to a Microsoft Word 2007 document and then perfectly printed text, the URL listed in the document did not print.  For comparison, I printed the same document using the C7180, and there is no problem.

    And finally, the center of HP solutions don't list not the DeskJet 460, only the C7180; is there a reason for this?

    Any help/comments are appreciated!

    _______________________________________

    The PDADoc!

    I can answer one of your questions - why Solution Center does not DeskJet460?

    Because this DeskJet does not complete solution support, the 'hooks' solution for the 460 Center are not created.  HP develops special software for each printer have the Solution Center feature.

Maybe you are looking for

  • In Safari, the links are inactive after update to iOS 9.3

    iPad 2 air. Updated to iOS 9.3 yesterday and found that most of the time links in Safari browser are inactive, i.e. it will not go to his content stated. For example, my search engine is set to Google. After a search, all the links in Safari are dead

  • read only attribute of folders 2008 server R2.

    I can't remove the attribute read only records in 2008 server r2. I have a total control over the records, have tried regedit, also cmd with attrib - r. Please, can anyone help?

  • The BES application settings?

    We want to allow administrators to set up our app via BES: enable or disable certain features of the app, pre-fill parameters, etc. I had a quick glance at some of the documents, and it seems strategies COMPUTER all devices or preinstalled applicatio

  • How to limit the ICMP on the PIX firewall.

    Guys good day! I have a dilemma with regard to limiting ICMP users browsing to other networks such as other demilitarized interns. I know that, to allow ICMP to pass through interfaces, you will need to create an ACL such as below: access-list DMZACL

  • WD Caviar Green 3 to HARD drive reformatted not up to 3 TB... only get GB 786. Win 7.

    WD Caviar Green 3 to HARD drive reformatted not up to 3 TB... only get GB 786.  Win 7.  What to do to get it to fit TB 2.76?