Problems of graphics in m6-k025dx HP after update 8.1

Similar Questions

• Problem of blackBerry Smartphones from the homescreen after update

  I've updated my device software. After update when two or more new messages appear on the home screen, I see only the first line of messages. I write a mention to @BlackBerryHelp but nobody don't answer my tweet, so I tried to send a direct message, but it's impossible because I can send direct message to my followers. I add a screen grab to my tweet, also I add Marmotta here (bottom).

  the current version is 6.0 Bundle 2949

  

  Have you tried a battery pull?  Can you delete or mark them as read and see what is happening on your next series of messages?

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Satellite A110: Graphics card is only 64MB after update 1.70 traditional Bios

  Hello!!

  I have toshiba satellite A110. I updated my bios to version 1.70, but now my video card is only 64 MB.

  What I can do for my back video card 128 MB or where can I find the update of the traditional bios to this bios version. Thank you

  Hello

  If only a BIOS version was published on the page when there is only one version!
  But there is no difference between the update of the traditional Bios and the BIOS from windows update.

  The State of the BIOS is the same.
  I mean the traditional Bios and BIOS of windows support the same features and only update procedures are different!

  I think that your laptop supports a 945GM Intel 8MB - 128 MB shared memory graphics memory. Am I wrong?
  The Intel graphics card automatically assigns to the amount of memory. This means the graphic driver memory sharing controls and the value is not fixed, but it always changes!

• Problem with Photoshop CC does not work after update

  I downloaded and installed Photoshop CC yesterday and worked with it without any problems. This morning, the cloud said that there is an update

  So I installed which.

  Now, the program will open but it does not meet anything, I can't access any of the Menus or load an image. The only way I can close

  is the hit Control-Alt-Delete.

  What can I do to fix this?

  David

  Hi dneely101,

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html .

  Kind regards

  Romit Sinha

• Problems to connect the Ipod to Itunes after update 12.4.6.1

  Hello people,

  I just installed the new update iTunes (Version 12.4.6.1 for 64-bit Windows), once more a new provision which made it very confusing. I just tried to connect my iPod Touch (old enough) to sync my new music but the device does not appear on iTunes anywhere. I use the same yarn I used two days ago and it worked fine and has done for over a year as I tried a different lead but still no joy. The device is recognized by my PC as it starts to load connected as well as it appears in the folder 'My computer' which has an icon indicating 'Device Apple'. Any ideas on how to work?

  Thank you very much

  Jason

  Restart the AMDS > restart the Service of mobile Apple (AMDS) on Windows - Apple Support

• Problems of list of Contact Z10 blackBerry after update to OS 10.2.1.537

  
  

  I would like to delete the synchronization of contact (or all of the GMail account) under settings > accounts and then add it again.

• Cutmaster plugin doesn´t works after update to Illustrator CC 2015

  Hi, someone at - he saw the problem with the plugin Graphtech´s Cutmaster after update to Illustrator CC June 16, 2015 2015

  Any solution, anyone?

  I hope ;-)

  / Patrik Liedgren

  If it worked in CC2014, then fall back to this version. For a plugin update, contact Graphtech.

• HD T410s graphic problem after update

  A few days ago, I decided to update my 2011 T410s by Lenovo
  Toolbox. I was looking for solutions to improve the battery life. I have
  has chosen to update all 'important' and some option updates
  those I thought that could have an impact on the battery life (BIOS update, Intel HD graphics driver, thinkpad power management driver and a few others)

  Since I have lived a graphic break several times when I watch videos online such as
  thedailyshow.com or youtube.com. The first time a
  a message on the graphics driver (or something like that)
  has stopped working and has been restored but the next second the
  ventilation was repeated, monitor would go black and the
  graphics would begin slowly reappear, I'd still get a message
  on the graphics driver and the other second monitor would again
  black and so on... Now, I only get the message more difficult when it happens from the computer retrieves before leaving black. The only way to break the cycle is to restart
  the computer and everything works fine. Until I have watch another video. ! I tried uninstalling the driver HD and reinstalled (both reinstalled as Lenovo and Intel), and it still does not work.

  Suggestions? Is someone else had problems after updating?

  Please uninstall the display driver, and reinstall.

  Also, install the latest player adobe flash.

  Please watch the video file online and then check it in.

  Best regards

  Tanuj

• Wanted M6 Notebook PC: Switch Audio Beats and graphic equalizer do not work after 10 can I upgrade

  My HP Envy Notebook PC sound M6 worked well with the IDT High-Definition Audio Driver 6.10.6498 (SP65196) on Windows 8.1.

  After upgrading the computer to Windows 10, a few weeks ago, the soft ON / OFF switch and the graphic equalizer on the experience tab listening to setting Audio Beats (in the notification area), seem to have no effect, while the computer plays YouTube or any other media source. However, music, voice, and the 3D film work, but if I switch the switch WE / OFF made drag commands of the equalizer, then close and restart the media source or restart the computer, the quality of the sound changes according to the changes I made.

  If I uninstall and reinstall the driver but does not restart the computer, the ON / OFF and Equalizer slide controls work, and I can hear the changes in sound quality that I do them (real time), until the computer is restarted when he's back as if the controls are disconnected from the source of the media.

  I also noticed that the controls were working 'real time' after update of Windows 10 Support Package KB3081438. For a moment I thought that Microsoft has solved the problem, until the second reboot, when it stopped again.

  I feel that Windows 10 is the substitution of some settings after restart, I would be grateful for assistance in this regard.

  Simple.

  Sorted,

  I removed the HP biometric devices, wireless button and IDT Audio (SP65196) drivers and installed the standard MS Windows 10 drivers, then installed HP SP71886 "driver Audio IDT high definition (HD).

  Everything works now.

• Satellite L20-101: problem of graphics card if I play games

  I have a strange problem with graphics. Generally, all right, but I have problems with several games. Usually I'm not a gamer, but sometimes I like to play. Anyway.

  When I get out of the game, the colors on the default backup screen. I don't like the default colors so I changed it. After the reboot, all right. Also when I go into the graphical console and click on apply colors became as they were before the games. What's wrong?

  Also, is that when I play two games. These are games from codemasters. Maybe their games is not compatible with my graphics card?

  I have no other problems running these games.

  Hi Pawel

  Believe me it is not easy to provide any reasonable explanation. Maybe you should contact codemasters support. Usually after the release of the game display settings should be as before. I put t think that there is any sort of compatibility issue because in this case, you will not be able to read.

• Qosmio X 300 - 14 p: problems of graphics card and the vertical stripes on the screen

  Hello

  2 days, after a long session laptop in many hours a lot, all of a sudden after the game for 2 hours
  Patrician 4 addon, it crushed in a strange and never seen before in a way:

  The screen would show the strange and weird color under all its forms rushing on ther display. You can't recognize anything, and after a few seconds of this screen and the x 300 - 14 p completely froze / crashed (hung - no reaction on anything except power plug pull or pressure on the button 5 seconds walk / stop ther).

  I was scared because it looked like to me a serious problem of graphics (nvidia chip) card or display.

  I was hoping it was because of the heat (even if I have a powerful block of cooling below the laptop and the heat shouldn't be a problem).

  Next day (yesterday), I launched the game immediately after the start, and after a few seconds the same crash appeared again with the same strange video glitches (never seen anything strange like this before).

  I immediately made the 5 second power button press reset. and then, when the first splash screen appears (the bios display indicator and the loading/splash screen), there was like 2-7 white stripes vertical (on black background) on the right side of the screen.
  They would not move or go away.

  I immediately turned off the laptop and it is off since then.

  For me this looks really serious, as if each chip nvidia (Geforce 9800 GTX) is broken or the display.

  Someone knows something about it?
  Everyone knows about this problem?
  Who knows more?

  I know, I can now connect an external monitor.
  If there is no problem, this should mean that it is a x 300 display problem

  If the problem also appears on the external monitor, the nvidia gpu chip. At least that would be my guess.

  Anyone have an idea about it, what it might be and what I could do?

  (I'm afraid to send him only the x 300 in to toshiba for fixing is not worth, because it's quite old)
  (it was purchased new in June 2009). fixing, it is probably too expensive.

  Any ideas on HCet problem?
  I've never had before.
  Who can help?

  Thank you

  PS:
  I was thinlking to buy the new qosmio X 870, but I just saw that there is no express card slot, I need for different expansion modules (like the tv and video equipment, more etc.pp cards e-sata).

  Without an express card slot I would not buy any laptop computer, I need urgently this slot machine (it's like a pci-express slot card connection in a desktop pc).

  For me the express card slot is vital.
  Never saw so many bad books.

  If io may need my x 300 for quite awhile,
  But what I would do abpout this weird new chip/video display problem?

  Hello

  I agree with you that it looks like a GPU problem.
  This means that it is the worst case, because in most cases the motherboard needs to be replaced
  Even if the GPU would be replaceable, this piece would be very expensive
  However, you can get in touch with a local ASP from Toshiba and can ask how it is

  Good luck

• Accident sound and graphics of P200D-11R satellite after the awakening of the mode standby

  Hello

  I was wondering if anyone here has had experiences similar to mine (below) or he can offer solutions.

  I have updated my OS P200D-11R for Vista 64 Ultimate to take advantage of the additional performance. I also add that the BIOS has already been updated to version 1.4.

  Well, everything works fine with the standard 2Gig of RAM that the laptop came with originally, however, when I update the 4Gig RAM (2 x 2 GB Samsung 667 mHz modules), sound problems and graphics appear each time that the machine is reduced from mode 'sleep'.

  The soundcard is a noise fuzzy laud very whenever he wants to play a sound and graphics to produce a lot of horizontal lines on the screen. I then just restart the machine which means losing all my unsaved work.

  Everything works fine as long as the machine is not fashion "Eve". Currently, I disabled sleep mode to prevent the machine from entering, but I find life very difficult without it.

  I am very surprised and also disappointed by the fact that Toshiba didn't test these machines with Vista 64 Ultimate and 4Gig of RAM!

  Additional info:
  Memory is the same type of Samsung as 1Gig modules supplied by Toshiba initially with the machine, and the Toshiba part number is recommended.
  I tried to install other (newer) device drivers from Realtek and ATI with no improvement.
  Memory modules all trials and are not defective. They have also been tested on my laptop Dell friends without any problems even in mode 'sleep'.
  I installed my friends 2Gig Dell memory modules in my P200D and they produce exactly the same results with sleep after accidents.

  My thoughts are that it must be another problem of BIOS unless anyone can shed some light on the question from another angle.

  Help, please! Thanks in advance.

  > Well, everything works fine with the standard 2Gig of RAM that the laptop came with originally, however, when I update the 4Gig RAM (2 x 2 GB Samsung 667 mHz modules), sound problems and graphics appear each time that the machine is reduced from mode 'sleep'.

  So if I understand this right, everything works fine using the standard RAM modules.
  In my opinion, the problem is caused by the new additional RAM.

  I have no idea why this happens, but in my opinion, it would be really interesting to know if this problem still persists with other memory modules live.
  I think this should be verified without a doubt because in this case, you might find what? s evil exactly!

• HP Envy M6 64 bit problems after update to 8.1 windows

  Last night I updated to windows 8.1 8 and have had problems since. I have a 64 bit HP ENVY #C2L94UA # ABL m6 after update, I tried to play Devil may Cry game that worked perfectly under 8.0 and then he comes to start charging the computer turned off. I did research online and exhaustion possibilities why including the abolition of the xbox drivers and reinstall the game but nothing doesn't always turns off the computer. I then opened AMD vision, to try to adjust the settings, I noticed I was now just as 3 options of things to settle. I could just adjust power consumption on the processor dependimng on if the computer was plugged in or not. Went a whole optiuon to adjust graphix and all the things to do it graphically disappeared. Then I redownloaded the catalyst drivers and tried to reinstal. Once the computer off again. Every time I have try and update the graphics it stops. Site Web HP says that all my drivers are up to date. Then, I rebooted the computer by pressing ESC and tried to do a system refresh. He failed. All the options of wiping my computer clean and refreshing failed. I said that it lacked a partion for one of them. Even system restore will not work. It shows my Ati video card in device manager. Please help me ty

  OK I solved my problems that I did start the computer in safe mode and then I uninstalled my cards video from Device Manager. I then restarted the computer and installed the version of catalyst that was said to work with 8.1 and switchable graphics cards. I have restsrted and have more no video issues at all.

• Vista - video problems after updates

  I went to shut my computer down about two weeks ago and he told me there were four updates, so I gave in and went to bed. The next morningarting the computer problems started. There seems to be a problem with the graphics and it could freeze after a while. I had the same problems with another computer just after having updated and he had taken home. They told me it was the graphics card and replaced it under warranty. I found it strange that both computers had the same problem at the same time. Given that the extended warranty on this computer was just exhausted I took to another store and after explaining what happened and work on it for three days, everyone came to the conclusion that it was the updates that caused remember there was nothing they could do! So I searched the Internet for a solution and found that it is a common phenomenon. Now I'm supposed to just buy a new computer? I don't have much that won't happen again with a new computer, given the frequency of this problem seems to be trust.

  Never install any Windows updates hardware drivers.

  Get them form the manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner