problems of home network with WMP300N

Similar Questions

• I have 3 PC home networking with a router. How to connect my new hp 6500 has more so any pc can print

  I have 3 PCs at home with one with XP 32 bit and cable to connect to a router Internet, the secoond PC with windows 7 64 bit and wireless to the same router and the third PC with XP 64-bit with the same wireless router. Currently, two have their own wired to their own printers. I want to replace the two existing printers with my newly purchased HP Officejet 6500 has more which will be located next to the XP 32 bit PC which has currently a cable connected to the router. How can I connect the new HP Officejet 6500 has more to my network to allow any of the three computers to print to the officejet and install the HP software on all 3 PC and if so what progs? I'm sorry if it's a very basic question, but I'm not a computer scientist and the help delivered with the printer documentation does not appear to this lay person to give this information on how to set up a home network with this printer. Thanks in advance for any advice.

  Mike4D

  Hello

  You can choose one of the following 2 options:

  

  Option 1: simila in the image above

  Connect the printer to the router,

  Connect a PC to the router (not wireless computer)

  Option 2:

  Connect a PC to the router (not wireless computer)

  Connect the printer to the wireless router

  Option 1 makes the computer without a connection to the printer. For the other two computer is the same on the two configuration options.

  Please use the following book to configure things

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• Having a problem using Epson WF-4640 on a home network with the iMac

  Have a new Epson WF-4640 which can be seen on the home network of PCs.  Will work with MacBook Air so plugged on the USB port on the MacBook Air.  Cannot get it to connect wireless or ethernet (via router) of my iMac 10.10.5 running. Have downloaded the latest driver of printer Epson of Apple.  Did the WF - 4640 MF with a port on the router, but still no joy.  Any ideas out there? Thank you.

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite

• try to set up a home network with two different operating systems.

  My mother has a desktop in Vista and two laptop computers, 1 on Vista and XP 1. the office is connected to the internet and has a wireless modem. the two laptops are wireless connections and both can connect to the internet using the wireless. The printer is connected to the desktop computer and file/printer sharing enabled. I can't connect to a home network.

  Home both my desktop and my laptop are Windows 7 and both are connected to the home network and I can share my printer. I can't seem to find the right/instructions buttons to connect his and do his work. Any suggestions?

  I tried to run the tutorial "set up a home network" and solve problems, but since they are different versions that the buttons are not in the same place and are marked differently.

  Hello

  This"the desktop computer is connected to the internet and a wireless modem" , is not clear.

  To have a coherent network, the Modem is connected to the network, the router must be connected next Modem WAN, and the wire from the computer or the wireless must be connected to the router.

  -------------------

  In general.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• set up a home network with the PC using xp vista and windows 7

  I need to know how confugure my desktop vista and xp desktop and cell phone with my computer laptop windows 7.  detailed with inustrictions or links please.

  Hello

  You plug the computer via the network to a router or a switch card, and configuring their file sharing.

  ---------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Can play.wma files fully but only seconds of .mp3 files on a home network with Windows 7 and WMP 12.0.7601 wireless

  Hello community,

  I have a problem with Windows Media Player 12.0.7061 when I try to listen to music through my home network Windows 7.  Windows Media Player has no problem playing the media all types of files locally on the Windows 7 system.  On my home network, .wma files play well through the (Pioneer) wireless speaker, but .mp3 and .mp4 files only play for the first ~ 5 seconds and then the audio stops.  If I wait long enough, Windows Media Player will skip to the next song and continue to play the .wma file.

  Is this a problem of DRM?  My home wireless network is too slow to allow .mp3 or .mp4 fully transmit the wireless speaker?

  Thank you!

  Problem dealt with.  It's a problem of bandwidth of wireless network.

• install the wireless laptop to print on a home network with C410 ptr

  Currently, I have a HP PC W7 with a HP C410 printer connected by USB cable. The PC is on my home network from Verizon.

  I have now a new laptop (W7) installed on my network home and I would like to know if I can print wireless from the laptop directly to the printer HP C410.

  If so, how could I do that?

  Thank you for your help.

  vspheat,

  Give these step from the above article suddenly. First, unplug the printer USB, then:

  1. Turn on the product.

• Internet or problem connecting home network prevents playback of microsoft silverlight N8103-106 error code

  Internet connection or home network problem prevents microsoft silverlight playback... N8103-106 error code someone help please!

  Hi DanielleGripentrog,

  ·         Did you do changes on the computer before the show?

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Uninstall and reinstall Silverlight and see if the problem still occurs.

  Uninstall or change a program

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  If the problem persists always, post your question in the Silverlight forums for more help and information.

  http://forums.Silverlight.NET/

• Home network with 2 PC with Windows 7 and 1 PC Windows XP. When sharing files via the MSHome network I have permission errors. How can I solve this?

  original title: cannot open or copy some files within the home network

  I have a home network that are connected by a router.

  A (main) pc is connected via a cable to a router on Windows XP pro sp3.
  2 other laptops running Windows 7 connected via Wifi.

  All of them configured to work with the workgroup MSHOME.
  On the pc main (with XP), I have a folder shared with full access, including change files. The folder contains videos that are uploaded directly to it.

  Sometimes 2 other laptops can not access some files, they see them but can't open them or copy them, I get this error:
  http://S3.PostImage.org/623foisor/image.PNG

  If I do the following:
  On my main pc I move the movie file in this folder to another folder and then bad bring it back.
  The file can be accessed and copied!

  What's wrong?!

  I'm glad that you guessed it work.

  Permissions show that "Everyone" has full access inherited, so that the list must have been made after that you have added everyone.  "Everyone" in this list without a guest user (or any user if you have active Simple file sharing) would not have permissions on this folder.

  HTH,
  JW

• Extend a home network with two router WRT160N.

  Hey guys,.

  I have a WRT160N and router WRT160N v2. I would like to extend my home network, so that I have more bandwidth throughout different areas in my house.  Should I create one of these routers as Repeater or maybe even a bridge? If so, how would I go all this?

  Thank you!

  -Jay-

  1. If you are referring to wireless bridge, this router is NOT capable of it. You must use separate bridge wireless to connect to Router 2.

  2 cable to fill, but is possible. Here is the Setup of this one;

  3. instead of a 2nd router, use a wireless access point

• Unable to set up a home network with XP

  Hello
  Tried to set up a home network, I'm having no success.
  My dektop running XP Home Edition and connects on a Belkin N wireless router, which in turn connects to a cable modem for internet access.
  I managed to put in place 3 laptops (1 on XP, 1 on Vista and 1 in windows7) to access the wireless internet via the router.
  I had expected given the Office a central store for music and images and allowing laptops to access the information about it, but no matter how I try, I can't the Office to see laptop computers or laptops to see the desktop. The router DHCP information lists all the PC when connected.
  I am at a total loss, could someone please?
  Concerning
  Yianni

  What antivirus is installed on your computer? Disable the and their firewalls including windows firewall

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/
  http://Windows.Microsoft.com/en-us/Windows-Vista/join-or-create-a-workgroup

• Go through the problem of home fencing with vCloud 5.1

  Hello

  I have 6 5.1 ESX host in my group of resource vCloud, everything works fine except that if I create a fenced VAPP and vShield peripheral Edge or land VM on a certain host then I can't talk to the virtual machine.  If both the edge device and computer virtual land on the suspicious host together is very good.  All other hosts work OK.

  I use VLAN 220 network pool, so I thought that it cannot be presented to the host doubtful, but which is not the case.  I'm pulling my hair out over this one, anyone can help me out here?

  Thank you

  If your network Pool is VCDNI base, make sure of a few things:

  1. that the vLAN 220 actually exists in the network fabric

  2. vLAN 220 is effective in all the Ports of the NETWORK adapter associated with the distributed switch that supports the network Pool

  3. make sure that your network supports an MTU to 1524... If it is not the value of the MTU of the network to 1476 pool and re-create everything that has used this pool network so far (to get the new MTU size).

• Problem setting 2 networks with 2 routers

  Hi all

  I tried to set up networks of mini 2 using 2 routers Linksys (WRT150N & WRT54GL) just for proof of concept before moving on to bigger and more complex configurations.  For some odd reason, I can't get this ridiculously simple network to work for me.  I scoured internet and I think I have an understanding of what needs to be done, but it does not work for me.

  So I came to the conclusion that it is me or the material.  Before I blame the material, I would someone know to check if my configuration is correct.  It's really very simple that it's laughable, why it won't work.  In short, this is what I did:

  My Windows XP PC Office (set to "Obtain an IP automatically") is connected to the WRT150 (WAN-side: DHCP, LAN side IP 192.168.1.1, SM 255.255.255.0 GW: 192.168.2.1).  The WAN port on the WRT150 is connected to a LAN of the WRT54GL port (WAN-side: DHCP, LAN side IP 192.168.2.1, SM 255.255.255.0 GW: 0.0.0.0).  Also connected to a port LAN of the WRT54GL is a laptop XP ("obtain IP automatically").  I have verified that the PC and laptop and the WRT150 got their IPs since the respective DHCP.

  My simple test of this network would be ping from the PC to the WRT150 router (192.168.1.1) and ping the laptop too.  I ping the router but not the laptop.  What I read, I should be able to ping side WAN (192.168.2.x) of the WRT150 as well, but which is not the case or the other.

  Can anyone see what I'm doing wrong and care to enlighten me?

  Any enlightenment will be greatly appreciated.

  Norm.

  Who is 3rd party firmware.  Contact the dd - wrt support forum.  This forum is for the Linksys firmware.

• Problems with the windows/debian home network after router switch

  Hi all:

  I'm new on all the forums, but desperately need help. Even though I am not new on windows and have been building my own computers for years, I am pretty new to networking and also for Linux.

  I have a home network with 3 computers with windows 7 installed and my server with Debian Squeeze. Somehow I've muddled through the installation of debian and even on my network using samba (after days of research). Everything has been great to work with all 3 computers and my server talking to each other.

  I got internet connection across the home network, and all the computers + Server appeared and was accessible on the LAN. It was with a little D - link DIR-601, last week I lost all the internet connect to Comcast, which turned out be their problem but Comcast informed me that my router was not the best and he was originally put my speed problems.

  So I bought a new router Linksys WRT54GL and installed yesterday and it's where I need help... I have internet connection and you can surf the web on all computers 3 windows and the debian server, all computers 3 windows appear and are accessible on the LAN, but not the debian server.

  As soon as I reinstall the D-link router, everything is back to normal. I tried with my limited knowledge of Linux to change network configuration files in my debian server but so far no change. I'm not sure this is a linux problem or a problem with linksys... If anyone has any ideas on how to solve this problem, I could use you help... Thank you ALL!.

  Thanks for your suggestions, but it turns out that the problem was a Linux problem, after changing routers, I had to make some changes in debian Linux as share. I'm on duty again.

• Problem with WIN 7 and XP Home Network

  I have a home network with 2 cable to the PC through a D-Link N Router extreme. Main PC is WIN 7 and XP Media Center. When put in first place, worked well, but PC now recognizes the other, nor so I can share files more. The two PC's have Internet access through the router, but cannot communicate with each other. I did all the trouble shooting suggested with no luck. Firewalls appear correctly implemented yet. Can someone help me understand this?

  Network Assistant served twice trying to restore the Home network, but still no luck. Other devices may wireless connection to the network & Internet successfully. Printer is connected to the router USB and used all the devices until this problem with XP unit. Utility said Shareport printer is available, but the XP unit will not connect. I am frustrated no end... help, please!

  Hello.

  I had this problem once I still have XP on one of my machines and the way I fixed that using Workgroup, use this site I used to fix my problem, simply ignore the part printer but it will solve the problem you have: http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/