Problems of HP laptop please help!

Similar Questions

• I have droped my laptop please help

  I droped my laptop a feet in height it works perfectly, but the problem is when I move my laptop. If I keep my laptop nd if she gets even a minute shock, it goes down. Even when I give you a little bit about the mouse pad it comes down. Please help me with an answer.

  Thank you in advance...

  He may be losing the connection between the motherboard and your ca, basically without laptop dissassembling it will be very difficult to diagnose the problem.

• Can't recovery my HP laptop please help

  Hi, I have an Hp laptop (model: G62-340US) that I bought in 2009. Finally, it crushed in 2012 and has conducted the test and repeated my system without a reboot disk features. He told me to press F11 to recover my system, but it does not work. I did not initially to create a backup recovery disk when I bought the system but in my defense, the new feature says that a disc would not need to restore the system. Nevertheless, I should created one when even my problem is when I start my computer, the HP logo starts but need me a screen where it tells me that his writing copy protected and that there no disc reboot please install reboot disk. I have tried F11 but nothing happends and I tried esc knock to get recovery screen where I can choose F1 through F11. I chose F11 but it'll still take me to the screen where it ask me to insert the disc to reboot. I hope that my hard drive is not fried and if all goes well at least pay for a disk to reboot. Y at - there a step I'm missing? I mean I can't even get into my operating system (Windows 7) to try to recover from this end. Please help... Thank you.

  You should be able to install a 2.5 "drive hard 9.5 SATA2 mm, up to 1 TB, with no problems. The disc can be either 7200 rpm or 5400 RPM. A disc of 750 GB or 1 TB 7200 RPM may cause a slight decrease in the life of the battery. Other than that, they do not cause any problem and you won't need to replace / upgrade your battery or other components.

  I hate sourcing of a hard drive on eBay and stick to an online retailer or a local store.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I've lost my admin account on my windows 8 laptop please help

  I went back to my old laptop because my other broke. When I come back, it seems that my old account of administration has disappeared. Please help me. I can't do anything without an administrator account. All users have been replaced by normal ones I think.

  Hello Greyyson,

  Thanks for posting your question on the Forum of the Microsoft community.

  You are unable to do anything because you are not signed in with an administrative account, so I you suggest to activate the default Administrator account and then try to create a new administrator account.

  Try the following steps to activate default Administrator and check if it helps.

  • Press Windows + R to open the Run dialog box, type lusrmgr.msc and click/click on OK.
  • In the left pane, click on/tap on the users folder, and then in the pane, double-click on/tap on administrator. (see sceenshot below)

  

  • Do step 4 or 5 below what you would want to do. (see sceenshot below)

  

  • To activate the account administrator built-in in Windows 8
    • Uncheck account is disabled , click/click on OKand proceed to step 6 below. (see screenshot below step 3)
  • To disable the built-in in Windows 8 Administrator account
    • Check the account is disabled , click/click on OKand proceed to step 6 below. (see screenshot below step 3)
  • Close local users and groups window.
  • The built-in administrator will now be available to select to connect to.

   

  More information

  You can also consult the suggestion provided in the following link and check if it helps.

  Enable and disable the built-in Administrator account

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• ACCIDENTALLY DELETED IDT AUDIO OFF HP LAPTOP PLEASE HELP

  HI I ACCIDENTLY DELETED IDT AUDIO ON MY HP PAVILION G SERIES

  PLEASE HELP ME, HOW DO I GET IT BACK, I TRIED TO GOOGLE AND DOWNLOAD "AN IDT AUDIO" BUT I CAN'T SEEM TO FIND A

  PLEASE

  Hello

  Try to use Recovery Manager to reinstall your original IDT HD Audio driver - how to use the recovery to reinstall the drivers and software Manager is detailed in the document on the corresponding link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Recovery Manager - Windows Vista

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• I have a sony vaio with built-in mic, camera and dvd rom and burner. everything dissappeared, I'm lost how can I get these things back working on my laptop, please help?

  can you please help?

  Hi TaraBaisden,

  1. you receive messages or error codes?

  2. When did you start the questions?

  3. you remember to make changes to the computer before this problem?

  You can try to run the fixit of material and check:

  http://support.Microsoft.com/mats/hardware_device_problems/

  You can also check the status of these devices in Device Manager.

  a. Click Start, Manager type of devices in the start search and press ENTER.

  b. double-click the device category to see an extended list of devices of this category.

  c. right-click on a device, and then select properties to view general information about the drivers.

  d. the status of the device, if there is a problem, an error code will be displayed.

  You can check if the error message or error code is the same for all devices failed.

  Hope this information is useful.

• BEX / BEX64 problem event name. PLEASE HELP ME...

  I had this problem for the last two weeks and the same message appears ".exe has stopped working". Windows cannot open my MW2 single player or multiplayer file, The Witcher 3 Wild Hunt or GTA 5. He started only with MW2 and then more games like GTA and The Witcher has stopped working over time. The Witcher and put GTA BEX64 developed.  I read solutions online including DEP (prevention of data mining) troubleshooting, assessories - command prompt, check all the drivers updated, game compatibility, etc. Who fail to solve the problem. Please help me as soon as POSSIBLE!

  BTW, I know these games work first hand I played all these games above all of a sudden no longer responds.

  Modern Warfare 2

  Problem event name: BEX
  Application name: iw4mp.exe
  Application version: 0.0.0.0
  Application timestamp: 55d37e9e
  Fault Module name: StackHash_4c0d
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 80000008
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 4c0d
  More information 2: 4c0d4d78887f76d971d5d00f1f20a433
  3 more information: 4c0d
  Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433

  The Witcher 3 Wild Hunt

  Problem event name: BEX64
  Application name: witcher3.exe
  Application version: 3.0.7.2515
  Application timestamp: 56995fe3
  Fault Module name: StackHash_0584
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fefbbb3d20
  Exception code: c0000005
  Data of the exception: 0000000000000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:0584
  More information 2: 05844721ba6f46935da4f741075b96d8
  Additional information 3: cfd7
  Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5

  GTA 5

  Problem event name: BEX64
  Application name: GTA5.exe
  Application version: 1.0.678.1
  Application timestamp: 56e2b38c
  Fault Module name: StackHash_0584
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fefbbb3d20
  Exception code: c0000005
  Data of the exception: 0000000000000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:0584
  More information 2: 05844721ba6f46935da4f741075b96d8
  Additional information 3: cfd7
  Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5

  System specs

  Windows 7 64 bit

  i5 4690 K

  GTX 980 4 GB

  ASRock Z97 Extreme 4

  Samsung 500GB SSD

  3 TB hard drive

  PSU Corsair 850 RM

  Corsair 16 GB of Ram

  Thank you

  Cody Carroll

  The Module 'fault' is not positively identified as:

  Fault Module name: StackHash_4c0d
  Fault Module version: 0.0.0.0

  It can help to see al the modules that are loaded in a collision.

  You can download and run the following application (AppCrashView):

  http://www.NirSoft.NET/utils/app_crash_view.html

  Click on one of the recent errors GTA5.exe.

  Can you copy and paste the information that appears in the lower window that loaded modules.

  Do the same for a mistake witcher3.exe and iw4mp.exe.

• weird problem with new screen, please help

  Hello people,

  I hope someone can help. I am using windows 7 Home premium and I hope it is a simple solution that someone has met before. It's just that I don't know how to describe it so can't type into google to find an answer.

  This happens in all programs, Firefox, ms word Opera, basically any window I opened. The bar menu at the top of the screen is a transparent white color and everything works well, but after 50 or 60 seconds, it turns into a transparent, I can still read the Word editing, display etc. file. This is where the scroll wheel on the mouse and what I'm typing stops working. When I type something with the mounted volume, all I hear is a single beep whenever I tap on a button, but nothing is actually typed. Now, all I have to do is click anywhere in the window and it works again, but only for 50-60 seconds. I had to click on the screen twice since I started typing this because when I look at the screen, everything I typed is not there because the menu bar's transparent again while I was typing. Its driving me crazy.

  I don't remember what is a problem before, if it was I would have surely noticed. The only thing that has changed is I had been using my 32 LCD TV as a screen for a long time, but I moved and did not bring my TV with me, so I use the PC came with the computer screen. It's a PC I bought my sister a few years ago so I never used the PC screen that comes with it so don't know if it happened when she or what, she has, she can remember either. I have a updated driver, did not work. Changes the settings in customize and cannot do it helped either.

  Monitor: monitor LCD Compaq CQ1859

  Do I something pressed or clicked on something by accident?

  Is there a setting some part that I forgot?

  I plan to cast the spell by the window, its really annoying.

  Please help guys and ladies.

  Hello salamander.

  Please contact Microsoft Community.

  I can understand the inconvenience caused, be assured that we are here to help with your concern.

  1. What is the model of the computer and do ?
  2. Do you see an error message when the menu bar is transparent?

  Please follow the link below and include a screenshot in your post,

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  I suggest you follow the methods below to see if it helps.

  Method 1:

  Clean boot: to help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.  Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Important: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Note: If the problem persists, continue with method 2

  Method 2:

  Check the problem by disabling the Aero transparency feature. Please follow the steps below to disable the Aero transparency feature.

  1. Right-click on a vacuum of space on the desktop and click on personalize.
  2. Click on the link to the color of the window at the bottom of the window.
  3. Uncheck the check box enable transparency to disable transparency and check the issue.

  For more information, aero feature please refer to the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Aero-desktop-experience

  Note: If the problem persists, continue with method 3

  Method 3:

  A Malware - scanner The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Please follow the steps below to use the scan to Microsoft Security.

  • Run the scanner from Microsoft from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • Click on download now and click Run.
  • Choose complete system scan and wait for the full analysis.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• BlackBerry Smartphones phone new problem... Please help urgently...

  Hello...

  I really need a help that expert on black berry 9810. I am a new blackberry user by the way. So now the problem is...

  I can't configure my phone because it always came to ask me upgrade my data plan. In addition to this, sound out always asking me to connect to the network while my phone is connected to the network.

  Please help thanks me...!

  Hello ccarthine

  Welcome to the Forums of the BlackBerry Support

  We need BlackBerry data Plan to access most application on our Mobile network / BIS our carrier, a normal data plan will not provide you these features.

  Then, contact your carrier or Wireless service provider to find out if your account is configured with the BIS.

• Big problem blackBerry Smartphones! Please help me.

  I work with my bb bold 9700, I want to make the video, and then my bb shut down! When I put my battery and reset on my bb light only red light about 20 seconds and then nothing, it's always turns off. I can't turn on my bb!  20 sec red light does not blink and after my bb turn. Please help me? do you know what is a problem?

  First, try it this way...

  With the BlackBerry device under voltage, remove the battery for about five minutes, and then reinsert the battery to restart.

• MuseJSAssert:Error calls the function selection: TypeError: cannot get the "init" reference to undefined property or no, I am a beginner and not able to solve this problem with my website, please help...

  Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.

  

  I did take all measures please help.

  Hello

  Can try you it on another browser that the problem does not come up on top of our end.?

  Kind regards

  Akshay

• I have a problem in my project, please help

  my project does not work correctly I do not know why .when photo supposed to be shown that he stopped .so I tied to show u what I mean so please help me to know what the problem.

  Hello

  Your problem is common. You are not understanding how everything fit together and interact in Captivate.

  You insert a button on this slide. Buttons playback normally until they were clicked by the user.

  Click on the image below to enlarge if necessary.

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• BlackBerry smartphones restart problem... Please help

  can someone tell me please how to restart my curve 8520?

  I have app updates, but cannot enter into my world of app until I have to reboot the device.

  He told me to hold down the power button, but all that is to disable the fone.

  can someone please help me because on my screen saying that I've updated knowing that I can not update the icon thing makes me want to throw the phone on the wall

  Thank you!!!

  fufuH wrote:

  makes me want to throw the phone on the wall

  Well, that might restart the device for once and for all!

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

  You can also press ALT + rightSHIFT + delete all three at the same time, to initiate a reboot.

  You will find thousands of messages here in the forum describing how this reboot is done.

  Good luck.

• Another case of "you are not running genuine windows" on preinstalled HP laptop - please help

  MGADIAG output: Please help - tear off the remaining hair.  Do not want to reset to the factory as there are a lot of things here now.

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 0x8004FE22

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - 788W3 - H689G-6P6GT

  The Windows Product Key hash: yr8OHoeXhbT4dc6MxGYjdAStSPY =

  Windows product ID: 00371-OEM-8992671-00008

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.1.7601.2.00010100.1.0.048

  ID: {3BD02B4D-F048-4D3D-BB10-ECF25C405DCD} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Professional

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.130318 - 1533

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  [File mismatch: C:\windows\system32\en-US\sppuinotify.dll.mui[Hr = 0 x 80092003]

  Other data-->

  Office details: {3BD02B4D-F048-4D3D-BB10-ECF25C405DCD}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-6P6GT2S-1-5-21-3694171884-2415530375-3274329710Hewlett-PackardHP ProBook s 4540Hewlett-Packard68IRR worm 00371-OEM-8992671-00008
  . F.0120120419000000.000000 + 000F0073A07018400FE0c 090409AUS Eastern Standard Time(GMT+10:00)03HPQOEMSLIC-MPC109  
  Content Spsys.log: 0 x 80070002
  License data-->
  The software licensing service version: 6.1.7601.17514
  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700008-02-3081-7601.0000-3352012
  Installation ID: 022076447202033002373893326466167513839586045240370656
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 6P6GT
  License status: licensed
  Remaining Windows rearm count: 1
  Trust time: 05/02/2013-14:06:40
  Windows Activation Technologies-->
  HrOffline: 0x8004FE22
  HrOnline: n/a
  Beyond: 0 x 0000000000000400
  Event timestamp: 5:2:2013 14:03
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAEAAAABAAAAAwABAAEAln0Ar7CNooG2QT6CnJY + hf4M9kGWYw is
  Activation 1.0 data OEM-->
  N/A
  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC HPQOEM 17F6
  FACP HPQOEM 17F6
  HPET HPQOEM 17F6
  MCFG HPQOEM 17F6
  ASF! HPQOEM 17F6
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SLIC SLIC-MPC HPQOEM
  MSDM HPQOEM SLIC-MPC
  ADELINE HPQOEM 17F6
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  FPDT INTEL IVB - CPT

  You will get NOT anywhere with activation until the Tamper file is processed!

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK will run the next time he started - press Y, press ENTER, and then restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the created CBS.log (C:\Windows\Logs\CBS\CBS.log) file on your desktop (you can not manipulate directly) can compress the copy and transfer it to your Public SkyDrive folder (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• Problem with clips nested, please help!

  Help, please!
  
  I have a movieclip symbol, let's say, a ball that bounces with a stop(); action on frame 14.
  
  And I have another movieclip symbol which has a text that cross the screen with a stop(); action on the frame of 10.
  
  The main time line, I would like to that ball to start bouncing on frame 2 and stop frame 15, so I placed it on its own layer with a keyframe on frame 2.
  
  I want, the symbol of the text to start on frame 6 and stop on frame 15 also, so I placed it on its own layer with a keyframe on frame 6.
  
  It does not work.
  
  When I play it back, the Visual jump wildly back and forth between the symbols.
  
  What should I do?
  
  I work in Adobe Flash CS3. ActionScript 3.0, 30 frames per second, Player 9 (not sure if this is relevant, but just in case).
  
  Please help me, I'm desperate, I can't understand it.
  
  Thank you!

  Hello

  I'm so clear with what you're saying...

  You have a movieclip that has its own animation of scenario of a bouncing ball and it stop on chassis 14? Even with text movieclip - he has his own animation of script for simple horizontal interpolation that ends on the frame of 10?
  And you placed these clips on the stage, put them on their own layers and moved the mc of ball to frame 2 and the text in the box 6 mc?

  Are there blank keyframes before the frame 2 on image 6 of the text layer and layer of ball? If not, then select frame 1 layer on the ball and press F7 to make an empty keyframe. Do the same on the text layer but select images 1-5 and click F7 to make them blank keyframes.
  What you don't want to do, is show the movieclip before the beginning of their animation. Therefore, you get the wild flashing.

  Also extended these layers to frame of 15 images? Otherwise, click on frame 15 (for the two layers) and press F5 to add frames.

  And you order stop() on plot of 15? Otherwise, create a new layer, call it actions and put a stop() on frame 15 command.

  Sure that your movie will play correctly now.

  NOTE: Just out of curiosity - why don't simply animate you everything on the main timeline?