Problems of messages after upgrade to 10.11.5

I upgraded 10.11.5 and Messages got weird. It is improper to list all four in a single discussion, let me know and I'll write more discussion.

1. after May 15, the messages are not stored on the Mac. ~/Library/messages/cat. DB has a timestamp of May 15, 2016 at 07:16. When I left Messages and restart Messages, "common" messages no longer exist, and the most recent message has a timestamp of 05/15/16.

2. arrival Messages get delayed. I just got a message from my wife that took 13 minutes to get on my Mac. Some messages arrive as fast as 2 minutes.

3. from Mac: Messages sent to my wife's iPhone are sent as SMS messages. Messages sent to its e-mail address are sent as messages.

4. messages that I create on my iPhone and iPad are not displayed on my Mac.

Details...

MacBook Pro Mid 2015 running OSX 10.11.5

To see if it would help, I deleted some files of preferences and an entry in my keychain Paul mentioned in another discussion.

Preferences of messages has my active Apple ID. It also lists my iPhone and your email address.

I disconnected Messages and Facetime, restarted and connected.

iPhone iOS 6 9.3.2

Settings-> Messages

* iMessage is on

* Text Message transfer is enabled for my Mac and my iPad

* Send recipes is off.

* Send and receive has 2 addresses (phone # and email address) and lists the good Apple ID

I connected off put off & reconnected.

iPad? 4? iOS 9.3.2

See iPhone 6

Don

~/Library/messages/cat. DB has a timestamp of May 15, 2016 at 07:16

Do you have read and write permissions for this file?

Tags: Mac OS & System Software

Similar Questions

  • Messages after upgrade to El Capitan

    After the upgrade to El Capitan 10.8.5, my message list shows only the phone numbers instead names/photos of the people? How can I get this back to show my son by his name?

    Please take each of the following steps that you have not already tried it.

    Step 1

    You may need to synchronize contacts between the Mac and other devices. One way to do that is via iCloud. On Mac, open the iCloud preferences window and login if you haven't already. Check that the box Contacts. Do the equivalent on your mobile device.

    Make sure that your contact accounts are activated in tab Contacts preferences window accounts.

    Step 2

    In the menu bar, select

     ▹ System Preferences... Region & language ▹

    In the region in the window menu, select one of the predefined regions. If it is already selected, select another, and then change it back. Close the preferences window. Quit and restart the messaging app.

    If you still have the problem after taking these steps, post your results.

  • DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

    Several problems to the upgrade of WINDOWS 7 for WIN 10.

    The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

    The definition "print directly to the printer" is not.

    Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

    Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

    Printer is listed in devices and printers.

    HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

    Printer turns off or recycle off on after turning on.

    Hello

    If you have a driver problem:

    Remove the driver completely from the computer, then download and install the lates driver.

    Here is the link incase you need

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

    Now, the yellow light flashes on the Panel means that the printer needs attention, like:

    -Close coverage which is open

    -Of paper

    -Paper tilt

    -Jam

    -An error code

    If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

    On the following link, you can find more information on how to prepare the error codes

    http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

    If you have an error code, the printer appears offline on your computer.

    On this other link, you will find how to check other messages on the printer

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

  • Problem with WSUS after upgrade of SQL and SCCM

    A few years ago, we implemented SCCM 2012 R2 on a virtual machine running Server 2008 R2 (Enterprise), using 2012 SQL for databases.  We use it for software deployment, updates/patches via WSUS and imagery of the network.  Everything is smooth enough for most, even if we hit a few snags Windows 10 points when that came out.  After you install the patches and updates to our Server 2008 box to make it compatible with Windows 10 content, everything was good again.  A few weeks ago, I decided to update our version of SCCM 1511 and SQL for 2014.  After the two updates, I tested imaging and software deployment, and everything seemed good.  I forgot WSUS, however... and later visited account it was not working properly for these updates.  Unfortunately, I realized after I deleted the VM snapshot, I got to thinking that everything was good (stupid, I know).  After researching and discovering some of the errors were permissions associated with - why would have changed the permissions on folders of SQL and SCCM upgrade I have no idea - those who have since been smoothed.  Now, my mistakes seem to be related SQL more and I hit a dead end with research.  When I opened WSUS and go look at the clocks, he tries to load the history of synchronization, and after a few minutes-error with the following information:

    The WSUS administration console failed to connect to the WSUS server database.

    Verify that SQL server is running on the WSUS server. If the problem persists, try restarting SQL.

    System.Data.SqlClient.SqlException - Timeout expired.  The delay before the end of the operation or the server is not responding.

    WARNING: The join order has been applied because a local join hint is used.
    Source .Net SqlClient data provider
    Stack trace:

    to Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow (SoapException-soapException)

    at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetSummariesPerUpdate (String computerTargetScopeXml, String preferredCulture, String updateScopeXml, ExtendedPublicationState publicationState)
    at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetSummariesPerUpdate (UpdateScope updatesToInclude, ComputerTargetScope computersToInclude)
    at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetUpdateSummaries (UpdateScope updateScope, ComputerTargetScope computerTargetScope)
    at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates (ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)

    at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows)

    I found a few forums that suggest to uninstall WSUS and delete the database, and then reinstall WSUS.  Unfortunately, when I try install fails... giving only an error code and no other explanation of why.  The error is 0 x 80070643, which is supposed to be due to the current user not having the "sysadmin" in SQL.  However, I have tried with several accounts I checked to make you have the sysadmin role in SQL (and are also part of the Administrators group on the server itself)-always get the same error message.

    I would really like to try to find that rather than wasting his time with the construction of a new server and redo our whole SCCM environment... get the client reinstalled on all our machines to synchronize with a new server appears as a huge headache.  Is there anyone else out there who know what would cause this?  Any help would be greatly appreciated!

    Hello

    This community is for users.

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    SQL Server TechNet forums.

    https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

    See you soon.

  • Get the error message after upgrade to Windows 10: peer certificate has no Secure Connection has an invalid signature.

    Error message trying to connect to Facebook after update to Windows 10: secure connection failed

    An error occurred during a connection to www.facebook.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

       The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
       Please contact the website owners to inform them of this problem.
    

    Hey, if you're an avast user, please disable https scanning software:

    1. Open the Avast dashboard on an affected system.
    2. Select settings in the left side menu.
    3. Adopt a Protection Active.
    4. Click on customize next to the Web Shield.
    5. Uncheck the option "Enable HTTPS analysis", and then click ok.

    http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

  • Big problems with fonts after upgrade to Yosemite

    Hello

    I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

    In general, these are the main symptoms of the problem with screenshots:

    1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

    2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

    3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

    Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

    < image edited by host to remove the serial number >

    You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

    (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

    2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

    3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

    (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

    sudo atsutil databases - remove

    Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

    This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

    Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

  • HP DV6-1240eo problem: "Volumebuttons" lost after upgrade to Windows 7

    Hello

    I have a problem since I factoryresetted my HP DV6-1240eo. It's original is Windows Vista, so first I installed as first of the factory (after the factory reset) and then used the HP disks for a Windows 7 upgrade.

    Everything I did to get rid of a bunch of * beep * which makes the computer slower.

    At the moment I can't use these buttons that I took a photo of (the volume bar and mute button, on the left. Symbol wireless works), because I don't really know what they are called or how I managed to get them back to work with Windows 7. They worked before the factory reset, so it's a complete mystery, why they do not work now.

    Any suggestions?

    Install the software the HP Quicklaunch supports the server.

  • Loss of the clear message after upgrade notification

    This morning (September 22, 2016), I accepted the updrade to 23.5 A1 version. 291 and since then, I've noticed that my message notification light no longer works. So far I disabled stamina mode and did a restart, but the problem persists. Any suggestions for a fix would be welcome.

    Thanks, after restarting a couple of times and ongoing failure, and then back to normal mode, it works now!  Everything is good!

  • Problem on Windows after upgrading RAM

    I have 6 years, Alienware m11x R.2 running Windows 7 x 64 SP1. Since the ole ' computer is still alive and kickin. I thought I'd do a quick refresher on the RAM for an inexpensive upgrade.

    I'm not an expert but to build my own PC and was demolished and rebuilt this laptop particular (among others) several times. The upgrade of RAM has always been something that requires very little attention or other planning that by ensuring that you have compatible specifications.

    I upgraded the RAM this laptop came with a year after the purchase of a Kingston Hyper-X. www.newegg.com/.../Product.aspx

    I remember having no problem with the installation of this RAM and it was perfectly fine since then.

    A few weeks ago, I ordered the DDR3L RAM, after starting the computer difficulties, I realized the error, but also said that the RAM must remain compatible with 1.5V power outlets. But maybe it was a compatibility problem, so I returned it regularly DDR3 RAM, shown here. http://www.Newegg.com/product/product.aspx?item=N82E16820231582

    Outside the actual size of RAM I don't see any other difference with specifications.

    Here's the problem: when I install the new RAM I asked to do a startup repair. No matter if I select run repair or normally I get sent to windows startup. This repeatedly. When I re - install the old RAM is the same screen, but I'm able to start or I can choose to run the repair. (I did both.) This happens with DDR3 and DDR3L RAM. No difference.

    I have triple checked that the RAM is installed correctly and BIOS sees all the 16 gb.

    Advice and assistance is appreciated. Thank you.

    For M11x R2, 8G (2 X 4).

  • Problems with mail after upgrade

    After the update from El Capitan with macOS Sierra my e-mail program does not stay open longer than 3 seconds. I have an end 2013 27 "iMac 3.5 GHz Intel Core i7 with 32 GB of memory.

    Is there any solution for this or am I the only one having this problem?

    Thank you

    Bob

    Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.

    You can use the guest user or create a new user to test.

    CREATE A NEW USER

    Go to system-> Preferences, create a new user in users and groups.

    Switch to the new user by logging incoming/outgoing or use the fast user switching.

    You can skip connect with an Apple ID, unless you need to test apps to iCloud. Hit continue and then jump.

    By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.

    You still see the issue?

    If Yes, then the problem is with your core files.

    If not, then the problem is in your user folder.

  • IPhone battery problems 6 more after upgrading to ios 9.3.5

    Hi all

    I have an iphone 6 more that was impressive, without major problems (except a minor inconvenience to be sometimes does not respond to the touch which has been fixed by simply locking and unlocking the screen), until yesterday (it's happened since I bought the phone and with hindsight, I probably would have had it replaced). I updated my phone to the latest ios (I think it's ios 9.3.5) in the last week or two. Battery seemed to come down faster than usual, but I assumed that it was only due to the increased use or something.

    This brings me to yesterday. For the first time, I met problems with the battery. She went from 26%, all of a sudden at 4% (after already declining at a steady and reasonable rate). I saw it and quickly grabbed my charger, a little confused, but don't think much. I plugged it in and a minute later when I went to use the telephone, he had popped up more than 20%. So I unplugged, not want to charge the battery unnecessarily and he returned to gradually decrease again for a while, before falling sharply to 1%. For this reason, I plugged the phone and got to backup contacts and then saved the phone in order.

    Now, more details of the issue at hand... As it seems, the phone connects to the power, shows that he is in charge, but stands at 1%. The phone was working then only connected to food, but stops twice after disconnection for more than a few minutes. It seemed that the aircraft could stay on when it is connected to a computer, but if the power lost, required a connection to the socket directly to the power again. Later tested the phone and it seemed to hold a charge for at least half an hour sitting at 1%, still capable of using the torch etc. I then connected the power leaving to test today because it made it seem like he was holding the load, but does not properly display the percentage.

    Today... I took the phone off fresh and it lasted from 07:15 to 08:35, including the use of bluetooth, etc. Then it dies. Appears that there need to be plugged in, now it was plugged into outlet directly for 45 minutes and will not always to power on, but shows low battery without connecting cord icon, suggesting the cord is power. Phone will not power back.

    Problems of attempts... A reset (now the two main buttons for 10-20 seconds) tried without success. Reset all the settings. Tried 2 different authentic and compatible cables, used 2 power adapters different apple genuine, connected on 2 different computers.

    So basically, my guess is that the battery is the question, but it seemed strange to me that I had no problem before, then with the recent update and the way it has at times, costs. I don't really want to send it away not knowing what the problem is. I live in a rural area, so cannot attend an Apple store to ask for help. But if it is not the battery, I have no interest to spend $500 on a service for a phone I paid more than $1000 for purely and simply. Very disappointed that this phone had restored my faith in apple products and I was just telling on the eve of what past how happy I was with the phone and now it unfortunately.

    If the phone will again fuel or if I can get it to connect to my MacBook, I'll try a full factory reset as a last resort.

    I would like to know if anyone can help or if there is anything more I provide. I tried to be as detailed as possible.

    Kind regards

    Dominique

    Download the app battery life, which will tell you the status of the battery. Or take it to an Apple store where they can test, or call Apple hardware service and they can test it remotely.

  • Problems with fonts after upgrade to Windows 10

    After the upgrade to Windows 10. Some of the police are white with black outlines makes it difficult to read a few pages. I refreshed and reinstalled firefox and it's still there. I disabled and deleted all the addons and it's always the case.

    Both pis. My only solution is to delete the font cache. Restart the PC and uncheck the allow the Web Sites to choose their own and simply used the Arial font. I can read very well now. For some reason any double check the last option is by default the text to look like that. Does not occur in Google Chorme then Yes.

  • problem with netflix after upgrading to firefox 6

    now that I've upgraded to firefox 6 I can't spy snapshot netflix more. Please help I don't want to use a different browser to do this.

    This also works if you have problems with the update of Mozilla FireFox 10.0 if you dress like 9.0.1 in accordance with the instructions of the DavidLee1951. Thank you, David Lee!

  • HP 15-r078tu Notebook PC: problem of brightness after upgrade to Windows 10 - r078tu

    I use HP 15-r078tu Notebook PC.  After the upgrade to windows 10 laptop brightness was awkward.  I always work with a minimum brightness.  But after the upgrade of the brightness of the screen is high, even when I set minimum height in power options.  When I keep up it is brighter than before.  And after the upgrade, the brightness control buttons work abnormally.  Reduce the brightness button is increases the slide of the brightness and the brightness button increase it decreases.  After a reboot, it works fine, but only after a reboot whenever you turn on the laptop.  I checked all updates in assistant hp support and updated all the drivers.  I also checked the online solutions for

    1. change the display adapters in Device Manager

    2. check updates

    3 go back to the previous driver and even after change to basic brightness microsoft display adapter is the same (he doesn't) even fit in (buttons) hardware / software (power options).

    Nothing has worked.  Any solution please?

    This driver is listed under the W10 drivers section, even if it's for W8.1 and more.

    You might want to try this one.

    This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp69589.exe

    If this one doesn't work either, unfortunately, I don't have any other suggestions for you to try.

  • Unable to send/receive messages after upgrade to 5.1.1

    Yesterday I put my phone to 5.1.1 and I am unable to send receive messages on my phone. I get a lot of important messages. Please help me with this.

    I've updated as a result of pc companion. Normal fact updated and restarted my phone. Please let me know how to fix.

    Happened to me after the update to 5.1.1, you you restored backup from PC via a CCP after update?

    If so, repair your phone (internal data will be wiped off) with the CCP and restore backup but DESELECT - parameters, data etc. listen Messaging.

    Read more here:

    https://talk.sonymobile.com/T5/Xperia-Z3-compact/SMS-says-quot-could-not-send-quot-and-conversion-Li...

Maybe you are looking for

  • Bluetooth device not no projection in sound-&gt; output

    My bluetooth (speaker) device indicates 'Connected' in the list of bluetooth devices (in preferences-> Bluetooth system). However, I don't see it as an option when I go to Preferences-> sound-> release system. Any thoughts why? This has worked in the

  • WiFi Compaq DC7700 CMT card

    I take the PC above later this week and I wonder if anyone can advise me on what the wireless card to get. It must be able to Draft-N and preferably Intel. It is the first thing I want to install, then I update the video features as well as the power

  • Pré-commandées album is just saying "bought."

    I pre-ordered an album. It was released 4 days ago. I can't download all the songs. iTunes just said bought and gives me no option to download. I tried to delete the album and the re - download but have had no success. Help, please!

  • Camileo HD - what is the default loader?

    Hello, I have so many things lying around here I do not know what adapter supplied with the equipment. Can someone tell me the default adapter that comes with a HD TV? And how it looks like maybe? I'm going crazy because I'm afraid to hurt my camera

  • Can save us from the Windows updates to another drive to increase disk space

    Hi I want to ask I can save the update of Windows to another example of player: as d ' drive, or an external hard drive, because the update are by default save to my c drive. And my c disk space becomes low.