Problems of mouse after the conversion of a hard drive file virtual Microsoft Virtual Server 2005 for ESXi 3.5

Today I used VMWare Converter 3.0.3 to convert a file evaluation VHD Windows 2003 Enterprise Edition SP2 (Virtual Server 2005) ESXi 3.5. It seems to work without error. However, I have a pending issue. In other words, based on the results of pilot of "VMware Pointing Device" in my being rooted at the bottom right of the Virtual Console of the mouse. The mouse buttons seem to work, but the mouse itself will not move. I have VMware Tools installed and that you have reinstalled them several times, just in case. If I change the mouse driver to the driver "mouse Compatible PS/2", it works, sort of. It moves around the screen and the same slides perfectly in and out of the console window, as you'd like. However, it is jerky. Hardware acceleration is maximum. The video driver and all the other features seem to work perfectly.

I converted a Windows 2008 VHD and it worked well.

If I do a new installation of Windows 2003, it works perfectly, mouse and all. If the problem seems to be limited to a hard drive Windows 2003 virtual conversion. I don't have a Windows 2003 machine to test if the importation which would have the same bug or not.

A very similar discussion was due in a previous thread several years ago http://communities.vmware.com/thread/36507.

Any help to fix this annoying bug would be appreciated.

Thanks in advance

Normally uninstall us the services that we believe may conflict with VMware devices (such as mouse), so that these problems do not occur. But just to be sure, it would be nice if you could 'uninstall' as suggested CONTINIUM and see if that makes a difference. An only problem here, is that you will not be able to uninstall the present of the VMware VM and you may need to uninstall this VS VM before proceeding with the conversion.

You can also see if this helps: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1002239

Post edited by: paragsha

Tags: VMware

Similar Questions

  • After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

    After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

    Hi TedWie,

    Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

    Windows XP SP3.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    Windows XP SP2. (According to THE level of SP)

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

    Note:
    If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

    If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

    How to troubleshoot a SP3 Installation fails.

    http://support.Microsoft.com/kb/950718

    Let us know if this solves the problem.

  • Re-installing Photoshop CS5 after the death of my hard drive.

    I'm reinstalling Photoshop CS5 after the death of my hard drive. The system is not accepting my product code. What's wrong?

    Thanks for your help. I found my information and I was able to enter the access code. Jeff

    Sent from my Verizon Wireless 4 G LTE smartphone

  • What is the next step after the replacement of a hard drive corrupted/dead, I replaced the original HD.

    After realizing that my original on the G56 - 118 CA hard drive died, I bought a new 'Seagate' Momentus 320 G SATA 16 MB 7200 RPM drive.  However, after swapping, install the new disk and using the recovery disk, I create the purchase of the computer... still does not work.  What is my next step... Please help, I'm out of ideas, I copied the drivers on the HP site, but it does not help.  Anyone think of buying a HP recovery disk will do something?

    Hello

    If you are in the United States, click on the link below.

    http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

    If you are in another part of the world, link below.

    http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

    Let us know how it goes!

    * Although I am an employee of HP, I speak for myself and not for HP.

    Click the White Star Kudos to say thank you *.

    Please check accept as Solution if it solves your problem *.

    Concerning

    Maton

  • Autochk stops 30 seconds during startup, after the addition of WD HARD drive for win 7-64 SSD system

    Someone at - it a way to improve this situation of slow start?

    Originally, I had two SSD in my system, and the boot process took 25 sec.

    Then I added a WD 1 TB HARD drive and the boot process has gone in 60 seconds.

    more than 35 seconds.

    When I look at track of startup, Procmon, I see sitting Autochk and wait 30 seconds after

    starting, before you do anything...  The led of the external drive is active on my system during this time...

    Are there problems of communication between the motherboard / HARD drive / Windows /?

    Or Autochk is "it's working" during those 30 seconds with no activity in the tracking log?

    I have now installed a new hard drive and the problem has not reappeared.

    I guess it was simply due to a defective hard drive!

  • How to use the recovery with a new ssd disk after the death of original hard drive

    I thought I had a simple fix/upgrade for my dv5 - 2077cl.

    decided to replace the defective hard drive with an SSD. couldn't afford a 240 GB size but it's big enough for my needs.

    I installed the new drive easily and cycled through my 4 recovery disc reinstall the minimum overlap. After you delete the last record, the screen goes gray and there is a cursor in the top left corner for more than 10 hours.

    I finally it turned off and tried again two times the same results. I removed the DDI and run disk management on it from my other laptop and an external cable to remove the partiion and create a single partition. Tried to install windows xp on a disk that I own this isn't an update or restore disc thinking I might switch to windows 7 32 bit because I own and upgrade the disks also. even if it is a 64-bit system, but I do not have any disk 64-bit except the recovery disks that didn't seem to work.

    When I ran the xp it seemed to work but then I got the blue screen that said there is no drivers for the SDS (the error is as follows stop0x0000007B (0xF78D2524, 0XC0000034, 0x00000000, 0x00000000))

    So I guess I need to have a windows 7 install disk rather than the recovery discs?

    the SSD is a Silicon Power S70 240 GB.

    any suggestions?

    Recovery discs usually require a hard drive of equal or greater capacity. XP doesn't have SATA drivers Sockets.

    If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.

    Links to downloads of Windows 7 ISO files:
  • How can I reinstall Vista (free) after the failure of my hard drive?

    My hard drive needs a total deletion.  After a reformat can I reinstalled my Vista Ultimate without having to buy a new copy?  (I have the same question about Office 2007, streets and trips 2009).

    Thank you.

    Most laptops and many OEM desktop computers (HP, Sony, etc.) come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

    These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and/or damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $25-50.

    If your office and streets & trips are preinstalled, you would contact the computer mftr. for the installation of replacement media. Otherwise reinstall them using a CD that you have.

    MS - MVP - Elephant Boy computers - don't panic!

  • Unable to activate Windows 7 after the replacement of a hard drive.

    * Original title: new hard drive and W7 activation

    H all the

    I have computer problems and plug a new 1 TB hard drive, to replace my old 500 GB drive, which became unreliable.
    I cloned my drive to the new, and it works well, how not says windows must be activated and cant.
    Help
    Thank you
     
     
    Repair and recovery Forum left Windows 7.

    Hello

    1. have you tried to activate the Windows 7 product key?

    2. do you get an error message?

    When you make a significant hardware change to your computer, such as upgrading the hard disk and memory at the same time, you may be required to activate Windows again. For more information, see Activate Windows 7 on this computer.

    I suggest to activate Windows 7 by phone activation product key and check.

    Activation of the phone:

    a. click Startand in the search for box type: slui.exe 4.

    b. press ENTER on your keyboard.

    c. Select your country.

    d. take the phone activation option and brace yourself for a real person.

    For more information, visit.

    Activate Windows 7: frequently asked questions

     

    How to contact a Microsoft Product Activation Center by phone

     

    Please update with the results. We will be happy to help you.

  • Error 6 when I connect in photoshop CS4, after the replacement of my hard drive on my mac pro. How to reactivate my

    I replaced my hard drive on my mac pro and now when I try to use my photoshop CS4 app, I get error 6. How can I fix it?

    When you transfer products Adobe sauvegardΘ on Mac, it breaks licenses.

    The simple way to solve this problem is to reinstall.

    There is also a python script License repair that you run the Terminal in OSX application.

    Here's a screenshot for this guide: https://forums.adobe.com/thread/1714695

    Start the #11 message and carefully study everything first, before applying the patch.

  • After the Windows Vista updates, hard drive of the computer constantly "working".

    Since the last microsoft automatic updates, my laptop is running continuously very strong as if if it does not work on something. It freezes now and then.

    I have a Samsung M60 and use Vista.

    Hello

    I suggest you follow the methods and see if it works below.

    Method 1

    You can make the disk check to check if your hard disk contains bad sectors.

    Check your hard drive for errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Method 2

    You can run Microsoft Safety Scanner has to check if your computer is affected by virus.

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-GB/default.aspx

  • some omitted spaces after the conversion of x 5

    I recently converted my 5 x aid project to version 7. After the conversion, some, not all, display of words merged compiled help, but does appear like that in Design view or when previewing in the topic. Normally, it happens after a word that is bold, or a hyperlink. When I look at the html code, it seems to be formatted correctly, in the following example, only the words Option display in bold management:

    Design/Preview menu screen - management Option
    HTML - < span style = "' make-weight: bold;" > </span > management option menu "
    Compiled help - Option Managementmenu

    The only way to add space is to insert a space before the/span tag. Of course, in the case of hyperlinks, it extends the hyperlink in space. It occurs sporadically throughout the project, and it will take me forever to try to capture all these occurrences. Anyone have any ideas on how to solve this problem? It also seems to be the case sometimes when I copy and paste from Word.

    Thank you very much for your help - Janet

    Yes, I always had the same results after you apply two patches. However, I installed version 8, and who took care of the problem. Thanks for the idea!

  • After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

    After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

    Is the name of an external drive or internal one?

  • After the conversion of server 2012 system_thread_exception_not_handled winhv.sys

    Hi all

    After the conversion of a machine Server 2012 (that is running Hyper-V) and from VMware vSphere 5.5 I get a BSOD and system_thread_exception_not_handled winhv.sys

    I know that I could use to disable the Hyper-V technology, no matter what else it could be?

    ~ eric

    No, I was simply convert a machine that already had the active Hyper-V role. I disabled Hyper-V and transformed again and it started properly.

    However, I found this article on editing the vmx file to allow a machine with Hyper-V enabled to run as a guest in VMware. http://blog.pluralsight.com/run-hyper-v-vSphere-5-1

    ~ eric

  • Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

    Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

    Hi larrys57575985,

    To change a file that you converted to Word format, you will need to download it first and then open it in Word. To download your file, sign in to your account on https://cloud.acrobat.com/files, select the file you want to download and click download at the top of the list of files. Your file will be downloaded in the download on your computer folder. In Word, you may need to click Activate the change at the top of the document.

    Best,

    Sara

  • Solaris VM is not running on ESX4.0 after the conversion of VMware workstation 6.5

    I have created Solaris VM on VMware workstation 6.5, but now I want to run it on ESX 4.0. After the conversion of Solaris VM from VMware workstation in format by converter 4.0.This VMware ESX VM restarts again and again on the boot of power.

    VMware workstation is running on Intel (R) Xeon (R) CPU E5420 and ESX 4 running on the Unisys ES3220L system

    Help, please...

    How was the original virtual controller?

    If it's IDE, you will need to also change SCSI to IDE on ESX 4.0.

    André

Maybe you are looking for