Problems of NAT for Xbox a Live, AC1900 Smart WiFi router model # R7000
I can't get NAT open for my Xbox One, it is set to moderate right now. I tried to turn NAT, filtering to open, address reservation, go wireless Ethernet, port forwarding / port triggering TCP/UDP 3074.
Any help would be appreciated
Yes, that's all. So, your ISP is NATing your traffic. Your situation is similar to the guy with the WiMAX. I went and found this thread.
https://community.NETGEAR.com/T5/Nighthawk-WiFi-routers/NIghtHawk-r7000-PS4-NAT-type-strict-3-issues...
This guy had to call his ISP and ended up paying for an address public IP NAT problems. You will need to contact your ISP and either ask a public IP address, or ask them how to configure their gateway port forwarding. Read the other thread.
Tags: Netgear
Similar Questions
-
Nighthawk R7000 AC1900 Smart WiFi router prevents access to Internet
Yesterday morning I lost the internet connection. After a day of trying to solve the problem, it has been determined that the Nighthawk is not only not allowing Internet access, but it stops it completely.
If I plug the computer directly into the modem provided by Midco, I get a perfect connection.
The minute I try to access Netgear genius to solve the problem, I lose the internet connection.
If I try to use the Wi - Fi connection, instead of cable, I lose the internet connection.
If I connect the modem to the router and the router to the computer, I lose the internet connection.
My router $ 199 is barely 6 months. The cables are in good condition. Of course, it would start to have problems after the free 90-day warranty/help from Netgear.
Any help to fix this would be greatly appreciated.
After that four days back with the company support Internet technology, they kept swearing that the router has gone bad. I went out and bought a new one, and it is same thing. They said they would have to call a technician to come to the House because they didn't know that their modem is not the problem since I could not in direct line with the modem to the computer. On a whim, I went out and bought a new modem, plugged into the router and the ethernet socket worked perfectly. If it turns out that something was going on with their router where it would not go to the modem to the router to the computer. When I tried this way, with the old modem, both the old and new router would not recognize the cable from the modem to the router, any cable, we used. But the new modem with router old and new work took over the old modem to the company and they told me there might be a short circuit in the modem, otherwise they cannot explain why the problem happening.
-
How to configure NAT for Hyper-V on laptop with wifi, wired and vpn connectivity
Me, as I suspect a lot of people, I have a laptop with WiFi connection, cable connection and VPN connection (Cisco AnyConnect), which
also uses a virtual adapter (activated when active). I searched for some time a way to be able to move to
Hyper-V in VirtualBox. Blocker full for me is the need for a lot of my virtual machines to be able to connect to the
Internet through 'the connection active' in the way that VirtualBox and VMWare Workstation/Player through their NAT feature.
I'm not a networking wait, but after looking around, can't seem to find something that is simple enough for me to configure,
with a minimum of resources, which allows me to connect a Hyper-V virtual network via a simple NAT device adapter
all three potential network connections - most seem to not assume that one connection out of the machine, which of course does not
me what I want.
Three questions:
1. is there a Windows application available that an adapter (like loopback) internal which acts as a real NAT device to one of the surfaces
external access via the active network connections and through the Windows Firewall and any other antivirus, components etc. for
the road to (i.e. behaves like a "normal app" inside Windows for internet access)? It would be the best option, because it would be
"always there" when I run virtual machines
2. display of my lack of knowledge around this feature, don't RRAS (and I know that this is not an option "minimum contact") allow you to
Connect an internal network adapter to several external network adapters?
3. on the Linux/OpenBSD various base/NAT routers, are everything that allow several external adapters and who are
relatively easy to set up (by an independent expert of the network)?
Really, we could do with this feature for Hyper-V on the desktop, but willing to work around him, if there is a way to at least the
use virtual machines, once it is easy to install.
Hello
The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.
http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads
For any information related to Windows, feel free to get back to us. We will be happy to help you.
-
Nighthawk AC1900 model R7000 - cannot install firmware
I have a Nighthawk AC1900 Smart WiFi router model R7000. I have a C2000T Modem from Qwest. I can't access the router settings page using the links provided in the instructions for installation of the firmware. We used to have our service wifi with Time Warner, and I was able to connect to the router and install a new firmware. Here is what is happening now: http://www.routerlogin.net: page error msg - "this Web page is not available. ERR_CONNECTION_REFUSED ". http://www.routerlogin.com: same msg of error as above http://192.168.1.1: redirected to the login page of the C2000T Qwest Modem Configuration. http://192.168.0.1: Once again taken to Qwest Modem Config. page I can connect to the Config of the Modem page: 192.168.0.1 is listed as the IP address of the modem 192.168.0.3 is listed as the IP address for the R7000. When I manually enter this address, I get the same page listed above error msg. I'm stuck. I don't know what to try next. Can anyone help?
Thank you very much! I really enjoy taking the time to help me. I am now able to enter the genius of router.
-
Linksys E3000 NAT open Xbox Live settings
Hi all
I recently upgraded my the WRT160n V3 to the E3000 router. I had the port to the front of my old 160n to get my game Xbox Live NAT settings to OPEN. When I switched on the router for the new E3000, my Xbox Live settings are returned to the Medium (medium). I assumed that this would have happened since this is a new installation/router.
Can someone help me configure my E3000 and Xbox Live so I can have my open NAT settings? I only need to configure the Xbox 1. Any help is greatly appreciated. Thank you!!!
The previous is large enough and generally useless for the configuration of the E3000 to facilitate capacity NAT open xbox live connections. 1 make sure you have a static IP assignment for the xbox an assignment of dhcp for the mac address of the xbox in creating or statically assigning an ip address to the xbox outside the dhcp scope, you set but on the same network / subnet of course. then go to the tab under applications and games and the prior port 3074, single port forwarding, both internal and external, to the IP address of your xbox. Name the rule openNAT or something that you will recognize. put a cheeck in the box to enable the rule and click on save settings to activate. Your xbox should now work without complaint about the need for open NAT xbox live test and gameplay should work just fine.
-
I need help, open my NAT for an xbox 360 on a WRT160N v3
Hey guys. I just got a new wrt160N v3 and I need help on opening the NAT. I use to have the wrt160N v2 but I replaced it. so can you guys please help me. Thank you
Okay I found the solution myself. Here's what you do:
Open a Web browser and type your default gateway which is usually: 192.168.1.1
After you do this type in as the admin and the password admin its also admin once you open a session go in application and games and go to the subcategory "port range forwarding."
For the first set appliction Xbox1 and the beginning and the end, the port numbers are 88. The Protocol is both and the IP address must end at 120.
For the second application updated Xbox2 and the beginning and the end, the port numbers are 3074. The Protocol is both and the IP address must end at 120.
For the third set appliction Xbox3 and the beginning and the end, the port numbers are 53. The Protocol is borh and IP address must end at 120.
For the fourth request put Xbox4 and beginning and end, the port numbers are 80. The Protocol is both and the IP address must end at 120.
Save the settings and once you go back to the installation page, make your size MTU 1364. Save the settings and then go to security and uncheck the anonymous internet requests to filter. Save the settings.
Go to the administration tab, and then make sure that UPnP is enabled. If it is not, turn it on and save the settings.
Tour of your router and the modem. Wait a minute and plug the modem first. Once it starts up plug in the router and your NAT must be open for xbox live.
-
There are a number of 24 hours for xbox live?
There are a number of 24 hours for xbox live?
Hello
Go to the following site:
Contact us - Xbox.com:
http://support.Xbox.com/en-us/contact-usFollow the instructions and give you a number to call.
Concerning
-
original title: Please help!
Im signed up for xbox live on my computer. Im trying to get it now on my Xbox 360. What I have to do a new Windows live account? If I click on "Join Xbox Live" button on my Xbox and I type in my information. It says IM associated with a different gamertag. Help, please!
Hello
Answers has no influence on the XBox or XBox Live If you need to contact them.
XBox - Support
http://support.Xbox.com/en-us/pages/default.aspxXBox - Contact us (support)
http://support.Xbox.com/en-us/contact-usXBox - Support Forums - and my XBox (top-right)
http://forums.Xbox.com/Xbox technical support phone number
- Toll-free: (800) 4MY-XBOX or (800) 469-9269
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Windows Live, games for windows live and Xbox 360 Live accounts.
Hi all
I recently bought an Xbox 360. I also had a Windows Live\Games to windows live account for many years and wanted to link this to my account xbox live. At the moment I have set up my live account xbox, that I had questions I now want to close the Xbox 360 live account and to transfer the gold membership and achievements across my account to windows live/games combined.
Is this possible and if so, how?
Any help would be appreciated
Kind regards
Craig Hanson
Hi Craig,.
I suggest to access the link below and follow the steps to move the account.
http://support.Microsoft.com/kb/906921
You can also contact Xbox support and check for instructions deteailed how to merge the former Member's account by account gold.
http://support.Xbox.com/en-us/pages/contact-us.aspx
I hope this helps.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
You want to set the parental authorization for Xbox live.
Original title: authorization wizzard - x box live
I'm trying to set the parental authorization for x box live, but the permission Wizard is American and does not accept my UK address. What can I do?
Hi LizG1,
I recommend you contact Xbox Live support for assistance:
http://support.Xbox.com/en-us/Xbox-Live/browse
Hope the helps of information.
-
Is there a new wheel wireless for xbox 360?
Tring to find out if there is a new wheel wireless for xbox 360?
Hello
The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
If you need to contact them.XBox - Support
http://support.Xbox.com/en-us/pages/default.aspxXBox - Contact us (support)
http://support.Xbox.com/en-us/contact-usXBox - Support Forums - and my XBox (top-right)
http://forums.Xbox.com/Xbox technical support phone number
- Toll-free: (800) 4MY-XBOX or (800) 469-9269
XBox LIVE - Service status
http://support.Xbox.com/en-us/Xbox-Live-statusManage the XBox Live account
http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-managementXBox Live Sign-in problems
http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-inI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have a UTM9S Prosecure home and it does not block the Xbox 360 online.
Xbox is recommended to open the following ports:
Port 88 (UDP)
Port 3074 (UDP and TCP)
Port 53 (UDP and TCP)
Port 80 (TCP)So I went to the network security-> Services and also Services network-> release of Port Security and added above (TCP and UDP) ports.
I also enabled UPnP they recommend.
No luck.
It was before working with a small router Linksys, so I know it can work if I have the right config, but do not know what I am doing wrong.
Any suggestions?
I use a UTM25S on firmware version 3.6.0-32. uPnP does not seem to work for XBox Live. I used the installation trigger port in the post of Shanlord and now it works fine.
-
Are there problems or restrictions with Xbox in the former CIS countries?
Are there problems or restrictions with Xbox in the former CIS countries?
Hello
Your Question is beyond the scope of this community...
I suggest that repost you in the Xbox Forums.
"Xbox a Preview program FAQ.
http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ
'Home'
"Xbox forums.
http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx
_________________________________________________
"Xbox Forums directory.
http://www.Xbox.com/en-us/forums
General
Material & Discussion Services
Xbox support
Agent hours: M - F 09:00-17:00 PTLaw enforcement forums
Technical support of Xbox Live rewards
Xbox Live rewards Squad hours: M - F 09:00-17: 00 PSTSee you soon.
-
Change the parental email for XBox
How can I change the parental email for the xbox
Hello
I suggest to see the link below for more information to change the parental email for Xbox:Manage your Windows Live IDIf you have any other questions about the issue, I suggest you to ask your question in the Xbox Forums to get help:Xbox forums
http://forums.Xbox.com/?XR=shellnavI hope this helps. -
Configuration error when you try to set up my Extender for Xbox 360 installation
I bought a new belkin wifi router, but library ready to run through my xbox 360, although it worked fine with the old router. I use only Windows Firewall with my Virgin firewall security and own routers firewall turned off, but get the same error in config to come. Am I missing something? I believe that I opened all the ports, as requested but not joy. I'm thick, or have I missed something?
Hello
1. did you of recent changes to the system before the show?
2. What is the exact error message you get?
Method 1:
Follow the link below and follow the steps and check if it helps.
Using Windows Media Center with the Xbox 360
http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center
Method 2:
Follow the link below and follow the steps and check if it helps.
Tips for solving problems with Windows Media Center Extender Setup
In addition, check out the link below and check if it helps.
Let us know, it helps.
Maybe you are looking for
-
I've updated to 5 FF. ? 6.0.2 and now Roboform password manager does not work. FF5. ? had an addon to make Roboform work with FF. I need to get back to 5 FF and can't find anywhere on the FF site.
-
Manually uninstalling the program driver struggling for Photosmart C6280
I had problems that motivated me to uninstall and reinstall my driver. Unfortunately, the uninstall program has been damaged and did nothing. I tried to reinstall it on top of the current program but the Installer did not provide this option when he
-
problems with labview 2013 build specification
I have a few screws of LV2010 I want to use to create an application to run with RTE2013. I have LV2013 on my computer. Without a massive compilation of the LV2010 screws, the element of selection of source files in the build specification has no pro
-
shortcut missing with restoration of XP.
Windows XP files was deleted when I tried to uninstall a software of teleconference. Once I did a XP Reinstall a message said that my files and folders were stored user profile / ntuser.dat. I can see the files, but every time I try to access the fil
-
Windows Media Center won't add DVD files to its library which do not affect the disk C on Vista
Hi people, I had Media Center works well with more than 104 GB of movies in the library. I ran out of disk space and a 1.5 TB drive was added to the system. Once this new space has been initialized, I moved all film to him records and updated the pat