Problems of networking between XP & Win 7

Similar Questions

• Printing problems home network between Windows XP and Windows 7 PC base

  I've seen a number of comments about problems between Windows 7 and Windows XP computers print domestic network.  In my case, I have a new Windows 7 Desktop connected to my printers and wireless modem and I use several portable Windows XP in the House that I am trying to reconfigure to wireless network printing.  My old desktop running Windows XP and I had this printer sharing wireless works fine.  I can't get the right of sharing the printer with Windows 7.

  Can anyone help?

  Roger Phillips

  This sounds like the correct driver and is supposed to be OK for the network or directly connect according to the HP website.  There could be something in the fine print of the following HP support document that will help you: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02171232&lang=en&cc=us&taskId=101&contentType=SupportFAQ&prodSeriesId=1845551&prodTypeId=18972 otherwise, the guided "Troubleshooting," "automatic Driver Verifier", or links to "Resources for collaboration" in what follows may help: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportResources.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=1845551

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Laptop HP 15-go99er: problem with network and WiFi

  Hey guys,.

  Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

  "Network controller"

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  ""PCI Device"

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Can anyone help, because I can't seem to find the proper drivers.

  Hello:

  For the wireless card, this driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

  For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

  If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Home network between 2 computers by LAN does not.

  I am trying to establish a network between 2 computers per LAN. They are in the same workgroup and I see each computer on the other computer. When I try and open or use of disks from one computer to another, I get 2 messages. 1. you don't have administrator rights. 2. this drive is not accessible. I used the wizard of network at home several times without success. Both computers have Windows XP. ????? Is there an easier way?

  Robbo,

  You can visit the pages below:
  http://www.duxcw.com/FAQ/network/xpshare.htm
  http://support.Microsoft.com/kb/304040
  See you soon ~!

• Configure a wireless network between 2 computers

  Original title: How can I set up a network between 2 computers

  I would like to set up a network between my woman computer and my laptop can we establish a wireless connection with a wireless router.

  Hello

  Click on the link below.

  Establishment of a network (Vista) wireless

  Hope this information helps.

• Home networking between Vista & Win7

  I'm trying to access a printer (hosted on a machine to Vista o/s) of an o/s Win7 machine on my home network.  Is networking between these two operating systems feasible?

  Yes.  These web pages have the details to help you implement:

  Sharing files and printers with different versions of Windows
  Networking of computers running different versions of Windows

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Left-click touchpad problem, after a few Pro Win-7 updates

  A system restore solved the problem temporarily, until this as Win-7 auto-updated! [Win 7 Pro with Firefox on an Acer TravelMate]

  Hello

  Yes, you can try to reinstall the driver mode safe mode and see if the problem persists. If this is not so much the problem, you can do the following:

  Method 1: Download and run Microsoft Fix It for convenience hardware store.

  Method 2: Going back to the old driver. To restore a previous version of a driver:

  1. Open the Device Manager.

  2. Right-click the device for which you want to restore the previous version of the driver, and then click Properties.

  3. Click the drivers tab.

  4. Click on restore the driver.

  5. In the restoration of the driver Package dialog box, click Yes.

  Let us know how it goes.

• Need help to set up a network between two Windows 7 computers

  I have two Windows 7 computers at home: one is a desktop computer that is connected directly to the internet (with a network cable), and the other is a laptop computer that is not directly connected to the internet with a network cable.  We have a configuration of wireless network for your laptop is set up of this network and has internet access.

  What I want to do is set up a network between the two of them, so that the laptop can access the printer that is directly connected to the desktop computer.  I got this configuration when both computers are Windows XP, but since we their past to Windows 7 I can not it works.  I tried to create a home network, I set the printer on sharable and given him a name, but I can't access it on the laptop.

  The printer is actually a photocopier, but it is directly connected to the desktop computer.  In fact, it is connected to the router than the phone company provided.  But we want the laptop to be able to access it and use it.  As I said, we had this configuration when these computers are computers Windows XP, but I tried following the instructions to do this for Windows 7 and I can't make it work.

  Also, I'm not that computer savy, so please if you tell me to run a program it please tell me how to find and launch this program.

  Thanks for any help.

  Hello

  Welcome to the Microsoft Community Forum.

  Before you start with the troubleshooting steps, I would need some information on the subject, so that we can better help you.

  1. What happens exactly when you try to access the shared printer on the network home?
  2. You receive an error message/code?
  3. Have you tried sharing the computer and using collective housing resources?

  As you mentioned, you can share printer for two other computer running on Windows 7, you can check the items below that will provide you with information on how to work with the host group, and also another article that will you provide steps on how to share a printer on the network.

  Homegroup from start to finish

  Share a printer

  Hope that the information provided is useful. Let us know in case you need additional assistance.

  Thank you.

• How can I share network between the computer laptop windows 7 into a window of 8 tab?

  How can I share network between the computer laptop windows 7 into a window of 8 tab?

  Hi HollyMcColl,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the issue you are trying to share the computer network between Windows 7 and Windows 8. I will certainly help you in this regard.

  I appreciate if you could help me with more information.

  -Using Windows 8 Surface RT?

  Note: You can create a Windows RT PC home group, but you can join one.

  I suggest you to consult the help articles and check if it helps.

  A Wi - Fi & networking

  http://Windows.Microsoft.com/en-in/Windows-8/HomeGroup#1TC=T1

  Share files on a home network or your Surface

  http://www.Microsoft.com/surface/en-us/support/storage-files-and-folders/share-files-on-a-home-network?LC=1033

  Share files and folders on a network or shared PC

  http://Windows.Microsoft.com/en-us/Windows-8/share-files-folders

  Get back to us if you need further assistance on Windows 8. We will be happy to help you.

• Packets exported 11 g, but when I import on 12 c error of ' the target 11.2.0.3.0 database is an older version of the 12.1.0.1.0 source. Thus the storage clause is ignored to avoid problems of incompatibility between the versions. »

  Packets exported 11 g, but when I import on 12 c having error of ' The 11.2.0.3.0 target database is an older version of the 12.1.0.1.0 source. Thus the storage clause is ignored to avoid problems of incompatibility between the versions. »

  When I export only 1 package and then import, then I have no error and imported successfully, but when I do bulk above mention error comes.

  
  

  How can you make with the help of the SQL Developer or query?

  
  

  Kind regards.

  The problem is solved since
  Impdp iris/tpstps@PCMS full = Y dumpfile INCLUDE PACKAGE VERSION = 11.2.0.3.0 = packagespcmsTWO.dmp =
  query

• Error Windows Store"we were not able to connect to the Bank. This could have happened due to a server problem or network connection has expired. "Please wait a few minutes by trying again.

  Original title: store Windows and Microsoft Services does not

  I tried for awhile to update to Windows 8.1, and whenever I open the Windows store, I get the following message:

  "We could not connect to the Bank.  This could have happened due to a server problem or network connection has expired.  Please wait a few minutes by try again. »

  I looked through a large number of subjects and lived simple solutions, like check that the time is correctly synchronized and clear the memory cache to store.

  Just today, I found another solution posted, to make my computer trusts.  To do this, I had to connect my local account to my microsoft account, I tried to do, only to be met with the following message:

  "Sorry, we could not connect to the Microsoft services right now.  If the problem persists, look for "referee" in the start screen. »

  I did the research you suggested, and nothing came.  When I watched this show online, I found the idea of creating a new user account, which has been received with the same question.  The suggestion of other involved running a diagnostic tool for Microsoft account who investigated the issue, which has turned a few 'problems found', namely an Unfixed 'Problems with the strategy of Microsoft account' and a Detected "Rootcauses found and created newspapers", but this is not what that means, or how to solve.

  In addition, some of the suggested solutions were an antivirus program, but I do not have a third part of the installed antivirus program.

  Any help is appreciated, because I really want to solve this problem.

  I had this problem too. Here is how I fixed it in about 3 seconds.

  1.) by scanning in the right and type "WSReset.exe" (without the quotes) in the search bar.

  2.) click on the application that appears. It will look like a Windows Store icon.

  BAM... done. I hope this helps!

• We could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. (0 x 80070422).

  OT: Problems with Microsoft Store for a computer in windows 8.

  It keeps saying we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. (0 x 80070422). Please help me thanks

  Hello

  Try the steps mentioned here and see if that helps:

  http://www.kapilarya.com/fix-modern-apps-not-working-after-upgrading-to-Windows-8-1

  If the problem persists, try to create a new user account.

  Hope this helps, good luck :)

• Error Windows Store"we were not able to connect to the Bank. This could have happened due to a server problem or network connection has expired

  Original title: Store of Windows 8

  I got the message to upgrade to windows 8.1. When click to upgrade it shows following message.

  "We could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please, wait a few minutes and try again"

  The error message appeared as early as February 2014, so I can't update windows 8.1 or go to store.

  Hi Rikas,

  You might face this problem if the proxy connections are enabled.  Cache clearing Windows Store is also known to solve the problem.

  Kindly, follow these methods and check if that helps.

  Method 1: Follow these steps to disable the proxy settings.

  a. open Internet Explorer to the desktop.

  "(b) click on the" "Tools button", then click on "Internet Options".

  "c. click on the" "connections ' tab and then click on"parameters LAN '.

  d. uncheck use 'Proxy Server '. .

  "e. click on" "Apply" and "okay ' to save the changes.

  In addition, run the troubleshooter app and check.

  This tool can automatically identify and fix some issues with the store.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  
  Method 2:
  Reset Windows store the cache and check if that helps.

  a. press on 'Windows and R ' key to open the Run dialog box. "

  b. Type "'WSReset.exe ' and press enter."

  In addition, follow the suggestions of this blog.
  Unable to connect to the Windows store (Windows, 8.1, 8, RT and Pro)

  http://blogs.technet.com/b/dennis_schnell/archive/2013/10/26/cannot-connect-to-Windows-store-Windows-8-1-8-RT-and-Pro.aspx

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• I can't access my windows store error we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. »

  Original title: I need help please.

  I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Read the link above and run the Troubleshooter "App."