problems of options cannot change settings

Similar Questions

• Sound problems on computer, cannot change the sound settings

  I had a long-standing problem in the audio settings of the Control Panel on Windows 7 where I can't change settings, configure anything or especially toggle of the devices. The options are there, but they have no effect when selected. Recently, I tried to connect my laptop to a TV, and as I could not set as the default audio device, I finally decided to try to fix things. I deleted and reinstalled the software Realtek my laptop and everything he has done is completely turn off my speakers, and all attempts to reactivate failed them. The unit displays in the control panel as a default active device, but claims of the taskbar that there are no speakers is connected, and if I click to set up the Realtek Audio, I have the same situation that before where absolutely nothing is happening.

  I tried troubleshooting sound problems, and all I get is the statement that an audio device is disabled, no attempt to fix or any option to enable. Apart from a system restore, that in general, I try to avoid, I feel that I have tried everything I can think of to fix this and only managed to make it worse. No help available would be appreciated to receive my laptop back to a functioning State.

  Model is a fickle Dell XPS L501X, if this is any help.

  I tried both of these methods several times without success, but since I found a result to this problem online. (Here: http://www.techsupportforum.com/forums/f217/solved-no-sound-the-unsolvable-problem-take-the-challenge-594113.html)

  I will stick also the solution here should someone stumbles on this page in the future trying to solve the same problem:

  Hi, go to start search and type cmd search will return the click right on cmd.exe and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

  Thanks for the help though, Yann!

• Firewall problem: "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  My firewall doesn't let me turn it on. McAfee says that my computer is in danger because my firewall is not on and tried to turn back on. It gives me an error code and says ' firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  Because you pay McAfee protection antimalware we assume that asked for the help of McAfee Support? http://service.McAfee.com/

  Try this: http://support.microsoft.com/mats/windows_firewall_diagnostic/

• Cannot change settings

  a few days ago he has updated Firefox to update on my computer. Since then, I was in the options to try to change the settings for a number of things. There is no apply / save button in the options pages. In addition, the tab options remains open - it is there everytime I open my browser. The browser tab is there and right next door is the tab options.

  Hi, there is no save/apply button because it is unnecessary now - just close the tab Options to save.

  For the other question, please see - How to set the home pageand ensure that Subject: preferences (URL Options) is not in the "Home Page" - If this is the case, you can delete it – while leaving the URLS of your favorite home page or the Firefox start page (Subject: House).

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Cannot change settings on R3000 XR

  Hello

  I try to remove the devices of a R3000 XR UPS management module but cannot delete devices. Other symptoms include the inablility to change the ip address of the existing devices in the list of connected devices.

  Has anyone encountered a similar problem?

  HP UPS Management Module Firmware Version: 2.1.11

  HP UPS Management Module Hardware Version: 1.00.A

  UPS:

  Managed to solve this problem by switching browsers - functions would not work with chrome and IE, ended up using firefox to perform tasks of reconfiguration.

• Cannot change settings on Photosmart 3180

  Product: HP Photosmart 3180 all-in-One

  I have upgraded to Windows 8.1.

  Question #1 - I used to have the printer set to Fast Black Ink Only project. Now, this setting is gone and there is no way to print automatically in this way.

  Question #2 - entered the solution Center HP settings, but when I click on the printer to print nothing happens.

  I checked the updates and it came back with no need.

  Is there something I need to do to ensure that my Windows 8.1-compatible printer?

  Or is the wrong thing?

  Thanks for any help you can give.

  Hello - Carey,

  Welcome to the HP Forums! I understand your concerns with your Photosmart 3180. How is the printer connected? USB or wireless?

  I recommend the continuation of this HP document on change of printing in Windows settings 8.1 Please click on "Change Print Settings from the 8.1 desktop", then click on "change the Default Print settings for all print jobs.

  Please let me know if you are able to change the print settings in the print preferences. If you're not, let me know and I'll continue to help you further.

  If your solution center is not open the "printer settings", you may need to uninstall/reinstall the software.

  Impatience on your part.

• Cannot change settings or update firmware on the WRT110

  Hello

  I am trying to solve problems with a WRT110 for my mother. A brother of mine was originally set but it was not available. I had a lot of strange problems, so I tried generic fix #1: restart.

  So I pressed the "Reset" button on the back of the router. Nothing seemed to happen. So I pressed it again. Once again nothing. So I unplugged the power and plugged again. I understand now that the "Reset" button actually redefines the default factory setting, but I didn't know that at the time.

  To my surprise, all the parameters have been missed. So, I went to put back them, but could not. Whenever I click on save settings it says post.cgi not found (specifically: http://192.168.1.1/post.cgi). Not found?

  So I decided to try the firmware update. firmware_upgrade.cgi not found.

  As far as I know, all .cgi files are now completely absent. All .htm files always seem to be there. But without the .cgi, I can't do ANYTHING to the router. It's really frustrating.

  I also tried holding the reset for 30 seconds button and wait 2 + minutes for a factory default reset. I have tried power cycling it again. Still lacks the .cgi.

  I was not able to find this problem in Google. I hope someone has a bright idea.

  Thank you

  -Pete

  Well, I feel stupid

  Apparently Google Chrome doesn't work with of the .cgi. I tried Internet Explorer and it worked. Lost so much time because of this.

  I hope that this thread will help someone else having the same problem.

• In Windows 7, incident reports is off and cannot change settings

  Good people, I have a problem with my page reporting the problems of Windows 7 Home Premium. Incident reports you click OFF (not recommended) and the page where you have 4 choices are grayed out. He said: "some settings are controlled by group policy. It is a PC at home with administrative rights. I even went and created an account with the same privileges and same problem. If you know this problem and can help me I would be very happy. It is the only problem currently with my PC 100% excessive and up-to-date for free.

  Kind regards
  Eric

  Hello

  See the link below which has Windows Error Reporting information and reports on problems and Solutions feature in Windows Vista (for windows 7): http://technet.microsoft.com/en-us/library/cc709644 (WS.10) .aspx

• Satellite problem BIOS L750 - cannot change the boot sequence

  Hello reader/answering my questions.
  I am having trouble with my 750 ODN bios. This bios is an official update (3.6) from the center of support, and almost everything has been fine since (the plot thickens!). I decided one day I want to dual boot with linux, in particular Fedora (this is unrelated to this though).

  But, when I burned the disc and tried to direct (too test) boot the boot order has been on hard drive, first of all, I found! I rebooted and pressed f12 - did not work.
  I tried to delete and escape - neither worked. Then, I tried all the f keys - none of them worked.
  Whenever he took me to the Windows Start menu, and I explored it and I could not find anything.

  It is also important to mention that I'm under Win 7 SP1.
  I tried both PLoP and osloader (too boot from the dvd) - neither worked.
  I also do not remember what the button to start the bios was originally - Oops!

  Also toshiba with instructions logo never appears.
  I would really just change the order of boot however, the rest of the bios I don't need access too much right now.

  A separate issue is that Windows randomly decides he wants to check my hard drive, which takes forever, and he won't until he arrives to check it out. I think it may need medical help.

  But, no help, a qualified doctor or not, would be greatly appreciated.

  Thanks in advance
  Mitchell

  Hello

  > I also don't remember what the button to start the bios was originally - Oops!

  Pressing F2 by turning on the device could help you access the BIOS.
  But you do not need to change the boot order in the BIOS. You can do it by pressing F12. This should be done immediately after you have turned on the laptop.
  Then the start menu appears and you can choose the right boot device.

  Does it function?

• You cannot change the settings of my Toshiba Power Management

  Cannot change settings in my power toshiba management section... can someone help me?

  Hi Matt

  I want to help you, but first of all, it would be very interesting to know the name of your unit.
  However if you have any problems with power management on your device, I suggest to download the new version of the Web from Toshiba site and reinstall the Power Saver utility.

  Good bye

• Cannot change the workflow in 5.1 VCO

  Hello

  I have VCO device 5.1.2 race. I'm sure that I have it configured correctly as used to work once the installation program.
  The Group Admin VCO is set to SYSTEM_DOMAIN_administrators_ and my account is part of this group.
  When I connect VCO customer I have no problem creating folders and new workflow (or duplicate).
  However, I seem to not be able to modify the workflow. When I go in the schema tab I can't drag items of workflow to him. As a fact, I do not see the items appear on the left side at all. Any ideas what could be the problem?

  Cannot change at all. The license is OK. I solved the problem by updating 5.1.2. I was running 5.1.1 5.1.2 not reported by mistake.

• Cannot change the rip options in Windows Media Player

  Original title: Windows Media Player

  I can't see or change the location of the files of torn pieces. I can't change the rip options.  It won't let me change, but when I hit it Ok replys "changes were made not."

  Hello

  1. what operating system is installed on your computer?
  2 did you change your computer, after which the issue started?

  Assuming you are using Windows 7, I would recommend that you follow the steps in these links that talk of a similar question.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/cannot-rip-CD-cannot-change-album-info/07fb8c99-9a7b-4456-9633-1f487d5f7a42
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/cannot-change-rip-settings-on-Windows-Media-Player/dac9c339-1e82-4F10-A30E-0d3798c5e3d0

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• I can't turn on my firewall, error: Firewall Windows cannot change some of your settings Error code: 0 x 80070424

  My firewall is off, I went to control panel to turn it on and it comes up saying "Windows Firewall cannot change some of your settings Error code: 0 x 80070424" any ideas how to fix or what's goin'?

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet MFP M277 PLC6: Cannot change the color settings, specifically in the category of graphs

  I need help on how to change the color for printer settings. I am unable to print graphics on forms, they come out as a solid black box. When I go into the color options I'm completely unable to change, there is no options to change anything: it only shows as neutral gray and black graphics.

  The printer has been the subject of assessment, and there are no exceptions to this topic. Please help.

  Your question is usually a driver problem.  Try to use pcl5 or postscript driver to see if one of them makes a difference.