Problems of printer error says "failed to print" but it prints very slowly

Similar Questions

• I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

  I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

  Hi Dee,

  Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

  Good luck!

  Kosh

• Printers HP f380 print very slowly

  If anyone can help me with this I would appreciate it a lot. I have a Hp f380 printer the following problems:

  the paper appears empty even though there is paper

  the ink light flashes even if I just loaded a n ew cartridge

  It prints very slowly: about one minute per page

  I tried to install the print and scan of the doctor and the crashes of the program before it finishes scanning for products every time I run as administrator

  I tried to unplug the printer

  I tried to uninstall and reinstall the printer

  the problem persists

  again any help would be welcome

  replacement of the ink cartridge after the printer unplugged for a while seems to have solved all the problems.

• 7851D HPF: HPF 7851D prints very slowly (see docs swiped photos)

  Hi my printer recently started printing very slowly. Its as if she "sees" the word documents, PDF etc. because it they are pictures. I can't see anything in the properties to change that.

  What I think happened recently is I upgraded from Windows 8 to 10.

  Any help would be great.

  Thank you

  I recommend removing your current driver and by downloading and installing the latest driver from hp.com.

  I recommend you find the driver on hp.com before you remove the existing driver.

• OfficeJet Pro 8600, Windows 7, any type of document with an image prints very slowly

  OfficeJet Pro 8600 Premium.  Windows 7 32 bit, any type of document with an image prints very slowly including .doc. Docx, pdf. Even when printing in draft mode.  Other documents are very well

  Take a look at this link.

• 6500 prints very slowly or failure to print over wireless

  I have the 6500 has more and he rarely printed wireless correctly with multiple laptops.

  Print a line at a time, very slowly, stops with the reported connection loss.  Corrupt characters are printed on the top of the page.  More likely to have problems with the larger print jobs.

  Impeccable with USB.

  Measures taken;

  1) changed its wireless phone system

  (2) changed linksys router Belkin (wireless network is impeccable with performance of broadband for all other devices, btw)

  (3) now use USB without problem

  (4) software up to date.

  (5) wireless report looks very good.

  However, I would like to reuse the wireless.  Please guide me towards a solution.

  Thank you

  Peter

  PS: Device Info:

  Product name HP Officejet 6500 E710n-z product model product CN557A serial number {removed from Privacy} Service ID 22028 Firmware Version CIP1FN1206AR Total Page count 3106 country Canada

  Well, go figure.  Because the printer has been moved, it has worked perfectly!

  Maybe it's a fault ranging/timing as opposed to a question of signal strength?  The intensity of the signal was 3 or 4 before the move.

  In any case, consider printing wireless solved my problems.

  Thanks Rana.  Out of box thinking was a good!

  See you soon,.

  Peter

• PSC 1210: PSC 1210 print very slowly

  Printer prints very, very slowly.
  Self-test page took 96 seconds.
  Test printing to HP PS RD took 05:34.
  I've tried everything recommended on the support site.

  In addition, with the regular docs (Word or PDF) it will print 1st page very well,

  then slow down waaaaay.

  The next page will take more than 10 minutes and out very light.

  I am convinced that it is not a problem of ink that I just replaced both cartridges.

  Thanks for any advice you have.

  The printer made a tape from the printhead, then pause for about 15 seconds before the next swath?  This is probably caused by the failure of one of your cartridges. I don't remember if the PSC 1210 supports printing with a single cartrdige, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• PSC 2175 printing very slowly

  Hello

  My HP psc 2175 all-in-one suddenly started printing very very slowly.

  No new drivers have been installed, or any other configuration change was made, so I have no idea what could have happened.

  Any clue?

  Thnks.

  Hello Soldadoryan, there are a few reasons for this. In simple terms, it could be due to the age of printers and use. Maybe this isn't the case in this case, however.

  Power supply from the printer is connected directly to a wall or connected by a surge protector? Visitors are often surprised the difference in performance when they connect the power supply directly into a wall socket because our printers have built in surge protector.

  After to change that, I would recommend checking and updating the firmware of the printer if necessary. The document here will guide you through this just to solve this problem.

  I hope this helps!

• My 4300 Officejet prints very slowly.

  My officejet 4300 print s very slowly. It will be printed in the first half at normal speeds then slows down the way for the second half. I use Vista. I turned it off and unplugged the printer and the computer and waited for an hour. When I started, I still had the same problem. This just started today. Thanks for your help.

  Hello

  I woulc check inks then firstly check the connection. How do you connect your printer?

  Kind regards.

• When I try to load Skyrim, it gives me an error saying: failed to initialize renderer. Hardware T & L required but not supported by the adapter. What does that mean? Do I need a new video card?

  Also, I would like to know how much RAM I have on my current graphics card. Its an Intel (r) G33/G31 Express Chipset Family.

  Intel integrated graphics adapter does not resemble something satisfying the requirements of the system of the game.

• All of a sudden my deskjet 5690 prints very slowly on my laptop Windows 7 2009

  Even the print project it takes 5 minutes to print a single page.  I have downloaded the software of the printer doctor, says that everything is installed properly.  Any ideas?

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• HP 8100 printing very slowly

  I have a HP 8100 laser printer that is shared on a network with several other computers. When I try to print from my machine, it takes about 60 seconds per page on average. When everyone can print, it prints each page one after another without any delay. Anyone know how I can fix this problem?

  It's really the only thing I can think of.  I did not notice at first, but it's a printer of the company, then you might find more advice on the forums of the company.  They will be more familiar with the systems of your work with what I am.

• Printer print very slowly

  I am running Windows 7 with an old one Printer.Scanner.Copier of all-in-One HP F380

  The driver seems to be incompatible with Windows 7, the scanner never worked, but printing has been authorized in the past 5 months. Suddenly printing became very very slow (about 4 minutes for 1 page). What has gone wrong? Help, please.

  Hi Carl,

  HP F380 all-in-one printer is compatible with Windows 7. Click here to check the same.

  I suggest you follow these methods and check if it helps.

  Method 1: Install the latest drivers from the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=1128296#

  Method 2: Solve common problems by using the tools of diagnosis HP for Windows

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c03292149&CC=US&DLC=en&LC=en&os=4062&Product=1128296&sw_lang=

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Please post back with the results and we will be happy to help you further.

• HP 5550dn printing VERY slowly?

  I print an issue of the magazine with my HP 5550dn. There is a very long delay between the printing of pages (minutes maybe two or three) and the display shows "Job Processing". When I was printing yesterday and this morning, he was not doing this. Certainly, it's not a feeling of speed, but I was getting on seven pages (11 x 17) a minute earlier. Now, there are these long breaks between printing. Any ideas?

  I don't know that I'm getting low on toner but I don't know why it would affect the speed of the printer. I restarted the printer a couple of times, shed jobs, etc.

  Any help would be greatly appreciated!

  I understand the problem... I got aquite a few photos on the page which have been very low, so I don't think they would cause a problem, but the number of photos it would slow down.

• HP 6500 is printing very slowly under OS x 10.9

  Hey, my 6500 has prints incredibly slow and it recently started really only questions. I suspect it was the update to 10.9, but am not sure. I can't find anywhere on the hp software to reduce the quality or speed of prints any longer. It's quite frustrating because it takes about 2 minutes to print a page now since the Mac and about 5 seconds of my PC.
  
  Anyone have any ideas?

  You always have HP software from a previous version of Mac OS X in your Applications folder?  If so, we need to remove it.

  In the meantime, download and install this: http://support.apple.com/kb/DL907
  
  Restart your Mac.

  Reset the printing system:
  
  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.