Problems of printer model

Similar Questions

• HP printer model k110a INK PROBLEM

  Hello people!

  I'm having this problem with the model of HP printer (Deskjet Ink Advantage 2060 all)... I bought it just because of its cheap ink cartridge and now it's the BIG problem.

  For this stupid ink, I had my black ink smeared anytime I pinned, touched with a bit of sweat on the hand and as photocopied kena if I write something that precedes the paper... and the quality is right etc... as newspaper quality and perhaps worse than?

  the used ink cartridge is 704.

  So, anyone could contribute to improve the quality? Maybe I need to fit in the printer setting?
  Or, can anyone tell me is it possible if I change the cartridge to another model?
  Or, is it advisable to change it in external ink?

  I want this printer to fix... desperately...

  PLEASE HELP ~ ~!

  Thank you very muchiii ~!

  wenxt, have you tried going to the Printers folder on your computer (sometimes called "Devices and printers" or "printers and faxes" depending on your operating system) and by changing the printer preferences?

  Find the copy of your printer and right click on it. Go to "Print Options". Here, there should be a tab of quality, and you can select your printer to print in draft mode. This should reduce the risk of smudging.

  Also, the impressions with considerable amounts of ink will be dry longer than plain text documents. Don't forget not that you give the documents that you print the appropriate amount of time to dry.

  Let me know if it helps!

• When I try to enter my printer model to find the drivers on the HP support site input panel disappears. It of OK in the previous versions of Firefox, but not in 18.

  I tried looking for driver for printer HP web site. When you go to the support page you are presented with 3 options. If you click on the first to search for drivers a billboard has an input box to enter your printer model appears. When I click on this Panel input box disappears.

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  The problems of Firefox using Firefox SafeMode

  When in Safe Mode...

  • The State of plugins is not affected.
  • Custom preferences are not affected.
  • All extensions are disabled.
  • The default theme is used, without a character.
  • userChrome.css and userContent.css are ignored.
  • The layout of the default toolbar is used.
  • The JIT Javascript compiler is disabled.
  • Hardware acceleration is disabled.
  • You can open the mode without failure of Firefox 15.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

  I have a Color LaserJet 2600n, on which I replaced both magenta and yellow cartridges a week ago. Both cartridges are genuine HP. The printer cleaned and calibrated.

  Today, the thin magenta strips about 3 "apart began to appear on my printed pages. Print pages, but there is a 'click' stable, audible about 2 seconds apart from from the inside of the printer. Even after a cleaning several times, the bands are less bright, but they are still there. They also appear on the printed test page and on the page of troubleshooting print quality. Is there something wrong with this new magenta cartridge? This problem has never happened before in the 6 years, I've owned this printer.

  Here a link to the document that addresses the issues of print quality for your printer model. It will give you the different troubleshooting steps to try to resolve the problem. One of the steps in the document will guide on inspecting the print cartridge and see if the replacement is in order. I hope this helps.

• HP Deskjet All in one printer model F4280

  I am running VISTA 32 bit OS, and I have a HP Deskjet all in one printer model F4280. After having updated the software and the drivers from the HP website. Printer is on and I connected all the cables ensuring that all are in good working condition.

  I plug the printer by USB connection in my laptop and everytime I try to print anything from any program, including internet explorer 9, he brings just a notice saying ' Explorer crashed and stops.

  Can someone help me?

   

  Hello

  1. What is the exact error message?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Problems when printing badges name for Avery 74652

  I'm trying to print Avery 74652 name badges.  The model is centered in the middle of the screen/pages and I'm not able to move it to the right so that it aligns with my badges of empty names.

  Original title: Please report this problem that I need to print to Avery 74652 badges. My templete in the center of the page and it needs to line up on the right side of the page

  Hello Niki,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems when printing badges for Avery. Then, please follow the following suggestions to solve the problem.

  First of all, you can try to consult the link below, which will help you get well aligned printing on the page.

  How can I get the impression to align properly on the page?

  http://www.Avery.com/Avery/en_US/Help-Center/frequently-asked-questions/how-do-I-get-the-printing-to-align-properly-on-the-page.htm

  Also, if she is unable to solve the problem, you can contact Avery Support and see if that helps.

  I hope this helps. Otherwise, feel free to write us back for assistance.

• When you try to open a file of the photo to view the photo, it will automatically to the hp print model

  Original title: hpc309A printer

  In Windows 7, whenever I try to open a file of the photo to view the photo, it automatically goes to the hp print template.  It's so frustrating when I want only to view the photo.  Help, please!

  Hi MonroeBroadway,

  Welcome to the Microsoft community. According to the problem when you try to open a file of the photo to view the photo, it will automatically to the hp print model.

  ·         Did you do changes on the computer before the show?

  I'll help you with this problem. This could be a file association problem. I suggest you to follow the steps in the article and check.

  Change the programs that Windows uses by default

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  I hope this helps. Let us know if you need help with Windows.

• Printing model is screwed

  Hello

  I used models RedRiver to print my cards. After the reinstallation of the computer, I have recurring problems with the models who worked. I start by choosing the correct custom paper size, then I click on the model and the size of the paper is lost, along with all the other parameters (paper type, print quality). I put the whole thing again, but the model is no longer selected. But when I select the model, the size of the paper and so on is lost again. What's worse, the image seems to be made to the letter-size paper and rest that way no matter what size. In desperation I started to click on the different buttons in PageSetup screen and at one point, the resulting model fixed and the resized image (I think I was playing with scale to the size of the paper at the moment, but it was not the first time that I tried it; and it does not work for a different model). Now one of the three models seems to work, but I'm not able to fix the other two. Everyone knows of a more logical way to fix it?

  I use LR 3.5, Windows7 and HP Photosmart Premium printer.

  I'd appreciate any help or ideas.

  It fixed again in unpredictable ways. This time, it was change from main tray to Photo tray. And finally image in its place in the model. Then, I could return to main tray and change if necessary. I've updated the model with the current settings.

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• problem the printer connection

  After having my computer reinstalled, I can't have my printer photosmart work 6510
  I don't really know to much about computers. can you please help...
  Thank you peter West

  Hi Peter,.

  I understand that you are facing difficulty to the printer connected to the computer.

  1. what operating system you are using on your computer?
  2. do you get an error message when you connect the printer to the computer?

  3 do you have the printer installation problems or you have problems printing?

  I suggest refer you to the article following if you have problems installing the printer.

  (choose the right operating system)

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=81984&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5058336

  I suggest refer you to the following articles, if you have a problem with printing and check if it helps.

  Solve printer problems

  
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  
  

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Let us know if the steps provided above helped to solve the problem. If you still experience the problem, answer and we are here to help further

• Compatibility problem of printer cartridge for HP 1000 J110A

  After the installation of HP cartridge 61XL get incompatble printer cartridges but in the box, it was claearly showing the J110A printer model.

  Thanks for tracking information. Seeing that the first set of cartridges was the 122 HP, those are used for printers zoned for Africa. 61 HP are zoned to North America, so the printer will have to be re zoned to use the HP 61.

  Contact HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• I tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan. Printer model: HP 3390 Laser jet

  tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
  Printer model: HP 3390 Laser jet

  I don't want the drivers.  I mean the software.  The drivers you get from the page server 2003 and the software from the page I referenced.   Otherwise, you need to contact HP, as they provide that software, not Microsoft.

  Steve

• Question of printer model # ATC705EB

  Just bought a new Acer computer and finish all hang on to the top but the printer. No place to fix the printer cable... I downloaded the manual and here, he says, I think, I need a memory card? You want to make sure before I buy one and find out after that the memory card is already in the computer... Thanks for any info...

  What is your printer model?

• I have a problem with printing on Windows Vista.

  I have HP desktop with Microsoft Vista operating system.  The printer I have is HP Laser Jet P1006.  1 months ago about the computer wouldn't print or download an attachment to an email.  I uninstalled the printer and re-installed, but the problem persists.

  What happened, it was this.  With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up.  Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line.  When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.

  Please explain what was wrong and how to fix these problems with printing and download of attached file.

  Hello

  Please contact the Microsoft Community.

  Have you tried to print using a different printer?

  I would have you try the steps of troubleshooting in these articles.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_e97ce00a6f76436cc859bfdeb053ce01=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DK.01.05.02&javax.portlet.tpst=e97ce00a6f76436cc859bfdeb053ce01&sp4ts.oid=3435682&ac.admitted=1402468218790.876444892.492883150

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&CC=UK&DLC=en&LC=en&product=3435684

  Note: I would first try to 'doctor HP Print '.

  If this problem is limited to the HP printer, so I'd like you to contact the respective support]-

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  We know if you need help.