Problems of recognition CDROM (new)

Similar Questions

• Problem to make a new partition

  I have a problem when creating a new partition: at the end of the process in the disk utility, may not achieve the partition, error on file system. Can you help me?

  OSX El captain

  First aid can repair the disk, and then try again.

• Skype have problems with recognition of Japanese characters.

  Good afternoon

  My Skype client have problems with recognition of Japanese characters in all the client except the menu bar. I tried to change the fonts in the options IM appearance, but without effect. It's strange for me, because after installation, these characters were correctly identified by the customer.

  Thank you in advance for help.

  may be regional settings are not correctly configured in your Windows.

• Problem starting on the new ACER Predator G9-791-73N7

  Hi guys!

  I have a problem starting on my new laptop that runs 10 64-bit windows.

  I tried to reinstall windows and my first boot options is the HARD drive so why my laptop still shows me this screen? If I am connected to the internet, the process takes more time before entering the screen windows... is there a fix for this?

  Thank you!

  

  Hello

  Go to the Bios and disable start-up networ.

  Take windows as first boot device boot manager. If it isn't there, you should do a propper EFI install.

  Steve

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• Error: "C:\Program Files/reviversoft\Registry Reviver\unins000.msg"is missing." "Fix the problem or get a new copy of the program.

  Original title: cannot start computer

  Cannot start computer

  This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?

  Hi Dan Maarsman,.
   
  -Did you change on your computer before this problem?
  -Do you have any third party registry cleaner program installed on your computer?
   

  Start your computer Safe Mode and check if you can successfully start.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  For more information, see:

  A description of the options to start in Windows XP Mode

• HP 15-ab029tx: UPDATE: HP Support fixed keyboard problem giving Me a new

  Original problem:

  Playing some games like need for speed or any game, Assassins Creed, counter-strike, Spiderman with WASD controls. After 35-45 minutes the keyboard starts to malfunction. The character starts to move randomly left direction without pressing me a key and to stop it I push on it was ' hard button.

  No problem in games, not because of synaptics Smart Sense. I've owned a lot of portable (3) to be exact, and it wasn't the problem in three others.

  Waste of time with the HP Chat Support:

  Contacted the HP Support, not one but twice. First time the Executive support uninstalled the keyboard driver and takes about half an hour to understand why the keyboard driver is not be shown in the Device Manager. After that I told him that in order for the material to be detected again, you must restart the system and then he has restarted and told me the problem is fixed and class case.

  Second time, Executive support even after say everything that I lived in the previous session started the remote session and continued and tried to update my graphics driver (I don't know why) from Device Manager. I don't know who did his Executive support because my PC has switchable graphics and HP says strictly do not update the system with switchable graphics cards manually from any where but support center HP or HP Web site.

  Finally I convinced to send someone.

  HP technician visit:

  Front panel of the laptop (keyboard + touchpad) replaced. The engineer had to remove each component of the system to reach the keyboard and replaced it finally. But then after a while when I tried to connect to my wireless router, it wouldn't even detect the connection (Yes, he was working just before the part was replaced, but not now). Not yet detected the router in the adjacent room, while all others of my device (cell phones, HP G4, tablets) can detect and connect to it.

  Which is exactly the problem:

  --> Internal Wifi Module Signal fell and it must only be connected to networks when the router or Wifi access point is close to the laptop.

  --> Hardware Wifi is fine, but the signal is removed. Before the replacement of the façade, off my all other 3 laptops and mobile phones, this system had the stronger WiFi signal.

  -->, I am aware of this problem and is not new, same problem happened to my old HP Envy 6 1002TX after that I got is fixed screen. But, as it was out of warranty, I couldn't get it repaired.

  I tried the things:
  1 reinstall the Hardwares.
  2 computer Reset.

  3 HP Support.

  I am currently connected to the internet by using the external USB WiFi card of Tenda. Here is the screenshot:

  

  Aftermath:

  Contact HP support, it took a lot of time to convince them that the problem is not with the software, otherwise they would have lost my time to reset the computer again. I arranged another visit of technician. We'll see if the problem is resolved.

  I searched online if anyone else had anything like this, I came across a comment:

  "Tighten the two fixing screws of a quarter turn each Wifi card in place. Guess he did not rest properly.

  This is the place where I got this: http://www.eightforums.com/network-sharing/22767-wifi-signal-strength-dropped-2-5-bars-2.html

  I reset the system again and packed until everything is fixed.

  A few comments:

  How you can recruit these people in the technical team that may not know yet what the problem is. He saw this thing through remote assistance that remained adamant that it is a software problem and asked me to give. I already told him that the system has already been reset and I tried to reinstall the drivers, but he wasted both of our time. If I were based not so much, it would have closed the ticket already.

  I don't know why these people think customer is a fool and don't know anything. Also, in the course of the support remote he ran a few commands on cmd which were for when you can not connect to the internet, but in this case the connection has not yet detected. I don't know why they do things like these.

  No doubt HP service is great, but you lose a lot of time to prove that you are right. The last time with my laptop 1303AU G4, there was a problem, but the local service station couldn't even find where the problem was. Then I had to search on the internet about this problem and found that it was because of the faulty motherboard and he said to the HP support and finally when only 10 days of warranty was left they took the laptop and fixed.

  PS - I'm no * beep * this time. I want the laptop fixed like new. I regret already buy one of your fancy 6 1002TX model until today and I'm not going to see the same thing happen to it. repair or give my money!

  The problem is now resolved. Finally, HP sent a good technician who changed the WiFi module and the problem was solved. If HP have sent the same engineer before I would ever encounter this problem. Nevertheless, thank you very much.

• Hello. I'm having a problem to download my new CC from Adobe. It seems indicative regional: A12ES.

  Hello, I have a problem to download my new CC from Adobe. It seems indicative regional: A12ES. Thank you

  Hello

  Please install the Adobe Application Manager and then launch it. It should update and install the desktop creative cloud for you application.

  for windows

  Adobe - Adobe Application Manager: for Windows: Adobe Application Manager

  for mac

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

• Drupal 7 and blogger do not work correctly on Firefox but on IE; the problems are quite specific; new problem.

  New problems on Drupal 7 and blogger who agree on IE. In Blogger, if I try to reply to a comment, I get a new window into the comments box that contains a new iteration of my Blogger template that I can't use. In Drupal 7, there are at least two modules that do not work correctly: the CKEditor GUI does not work and the filter of the Module does not work correctly. There is no error message, and the two modules work fine on IE and Chrome.
  There is nothing on the web that suggests or either of these Web sites is to have this kind of problems.
  Thanks for any help.
  David Hilfiker

  Hi david.hilfiker,
  Thank you for your question, I understand that this is happening on two sites. If this is not the case on other people's computers please try a restart of Firefox.
  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.

  2. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Problems with firefox and new Seagate SSHD

  I recently installed a new Seagate 1 TB SSHD into my computer, it's the new generation of hard drives with built in 8 GB SSD cache. I cloned my old install and everything seemed to work ok

  I use firefox with Yahoo answers and regularly answering questions. If I answer a question and press on submit my answer is displayed correctly. If I then try to change my answer and press on submit again that my initial response is displayed and not my answer updated. If I change my answer once again the update response appears after one or two attempts. It seems that there is a problem with the way firefox and this new drive interact with each other.
  I uninstalled firefox and deleted all associated data files and made a new installation that actually no difference
  I am running version FF 26
  Windows 7 64 bit
  4 GB OF RAM
  AMD Athon x 2 64 6000 dual core

  The problem did not happen with my original hard drive, nor is it with Internet explorer or Chrome
  I have suggestions would be appreciated.

  David Gaguine

  Thanks, but my router does not have a cache and it does not explain why the problem started with the SSHD and is OK with a standard SATA drive.

  Clear the history after that outputs FF has not worked.

  I think I'll contact seagate support and see if they have similar reports or waiting for the firmware for the drive update

  David

  P.S. I have now to lower my head in shame, I discovered that the problem occurs on other machines, it must be something to do with my network or on the Yahoo site itself not FF or new hard drive happily.

  I apologize for wasting everyone's time

• Problems with Yahoo Mail new fonts

  New Yahoo Mail written police community is too small and the larger font is too fat also before writing is smaller than the police to know, what is the problem?

  Thanks for your help, but I think the problem is with Yahoo as their new E-mail is full of questions.

• Satellite Pro C650 - problem of disk - need new

  Satellite Pro C650 model number: PSC09A-01V021

  SMART Disk reported an unspecified problem of HARD drive & recommend the backup (done) & HARD drive replacement.
  It runs so slow, that it is unusable. Warranty has expired, I would like to replace the HARD drive myself.

  The failed drive is a Toshiba 320gig MK3265gsxn.
  I'm looking at a WD 500 G 16 M, 7200 RPM SATA 2.5 inch Scorpio WD5000BPKX as a replacement/upgrade.

  I guess that the new drive will be detected / Setup by the BIOS but I don't know if the recovery disks will work with this Western Dig, expansion & faster by car. Can someone advise please?

  Drive recovery questions.
  When I made the recovery discs using Toshiba Recovery Media Creator proposed programme marking the first discs of rare as Recovery Disk 1, 2 and so on. I guess that these disks are my backup of user data. Yes/No?

  The last disc was called Windows Recovery 64-bit environment. This is the factory default backup & must be installed first?
  Is it transfer the recovery Partition and install Windows on the new drive?

  Thank you

  GJL.

  Now when you need to swap the HARD drive I recommend exchanging it with SSD. It costs a little more but believe me laptop s performance will be much better. I ve made the m even and I so happy.
  Laptop starts faster and much better work.

  Disk recovery image is the original recovery image back-up and has nothing to do with your own settings.
  When you install portable aura of factory again and it will be the same situation when you started your laptop for the first time.
  In my opinion, avoid any problem created using drives with new HARD drive. In general there is no limitation and you can use different hard drives.

  In any case, think about SSD.

• Problems move iTunes to new computer Windows 10

  My apologies in for raising this issue again, but I searched here and all over the web and can't seem to find an answer to my question.

  My old laptop Win 7 died a few weeks ago.  My new laptop is Win 10.  Fortunately, although the old machine is kaput, I managed to remove the HARD disk and all data was still in tact and accessible.  I moved the folder the folder iTunes music on my old HDD to my music folder on my new computer.  I moved also all of my actual files of original music for the new computer; Once again, all in the same exact location.  I have also authorized the new computer in iTunes.

  However, when I run iTunes, even if all my albums appear, when I try to play a song that I get the dreaded dialog box that says: "the song _ could not be used because the original file cannot be found. You want to locate? "and even more formidable exclamation point appears next to the songs.

  I followed every piece of advice that I can find; I have uninstalled and reinstalled iTunes several times; I installed iTunes and moved the old iTunes folder in different orders. I copied tried copying the contents of the iTunes folder from my old computer into the iTunes folder on the new computer, when I recently install iTunes.  Nothing works.

  I also noticed that on my old machine, the iTunes database (file * .itl) was actually in the iTunes of parent folder, whereas, when I install iTunes from scratch, the default location for the iTunes database (file * .itl) was in the iTunes media subfolder.  I tried to set up my iTunes 'old' folder in the two formats when I copy on the new machine, but doesn't seem to make a difference.

  I know that I could go and use the option 'Search' for each album, but it is an extremely difficult task because of the large amount of music I have in iTunes.

  No matter what I do, iTunes can't find the original music files, even when I go in the Advanced preferences and redirect manually to the * file itl.  I can't help thinking that at the wrong place simply indicates the file *.til, and I don't know how to change it.

  The only things I can think of that might be the cause of the problem are:

  1. is this something from Win 7 to Win 10 (seems unlikely, because others have not reported this problem); or

  2 would it be that the drive letter and path where my music folder is on my new machine are both different from my old machine?

  On my old machine, I had a c: / partition that contains the programs and the operating system and a d: / partition for data, where my music folder.

  On the new machine the OS and data are stored on the c: / drive. It is "hid" d: / partition with data recovery.

  Also, on the old machine, my data stored in a folder of the user who was named with my first name (e.g. D:/users/FirstName/music).  But, when I created my account on the new machine to win 10 automatically named my user folder by appropriating the first 5 letters of the email address that I used, I understand is standard to win 10 (for example, C:/users/Email/music).

  These are guesses, but I'm all out of ideas.  Is it possible that someone here might be able to help me to rectify this situation?  Sorry to be so long-winded, but hope the more information, more likely it is, I'll be able to find a solution.  Thanks in advance for any guidance.

  The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parent folders, or the reader, he feeds has been a change to the drive letter. It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

  Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. Look under the file tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

  In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find titles in the same provision, artist / album, they were previously, with a systematic change to the path.

  If another application like Windows Media Player has moved/renamed files then the chances are that subtle differences in naming strategies will make it difficult to restore media on the precise way that iTunes is expected. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.

  If you want me to try to provide specific advice, please post back the following details:

  1. The location of the media file under Edit > Preferences > advanced
  2. The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
  3. The real path to the file which you gave 2 details.

  See also make a library of portable split for some information on the standard layout for the iTunes library.

  TT2

• Satellite L850-18 t has problems to connect to new wireless router

  Hello

  I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

  I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

  Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

  Among the specifics on laptop:
  -Computer laptop Toshiba Satellite L850-18 t
  -Network cards:
  -AR9485WB-EG atheros wireless network adapter
  -Realtek PCIe GBE Family Controller
  -Router: Tenda

  Thank you!

  Posted by luka_10
  

  Hello

  I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

  I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

  Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

  Among the specifics on laptop:
  -Computer laptop Toshiba Satellite L850-18 t
  -Network cards:
  -AR9485WB-EG atheros wireless network adapter
  -Realtek PCIe GBE Family Controller
  -Router: Tenda

  Thank you!

  What I see is that we have same wireless Chipset, Tenda use Ralink or Broadcom chipsets, which are compatible with our wifi cards, then I would tell you my opinion do 1st updated drivers on your laptop, I use the latest x 64 win10, atheros version drivers 10.0.0.326, then go and upgrade your routers firmware! I don't know it will solve your problem, by the way check firmware of the laptop is the last 6,80 I think!

• Errors/problems with my brand-new Equium A200 15I (including video material)

  Hello

  I am treated to a new computer laptop last Saturday and only had for about 3 and a half days so far but I noticed a few things that I wasn't sure were errors/defects or if it was simply because its news, like the fact that sometimes I type with the keyboard and some letters do not appear on the screen , I think it's probably more to do with me not type or support pretty strongly on the keys rather than anything else, his is not so much now... the touchpad becomes a bit sticky too and he thinks I want to scroll up and down when I move the cursor does not scroll sometimes but I managed to make it work I think that most laptops have glitches like that and no doubt I could help fix it in calibrating the pad (?) touch I did have time to consider the issue and yet if... There are a few other things well and more disturbing than this morning I got an error of video material, so now im a little just worried or suspicious that it may be a real fault with him and would like to know if it is the case, if its something I can fix eventually (im no expert especially with the material, but I can always try to download and installation of updates / corrections and this kind of thing so she could solve the problems).

  The main thing that concerns me more, is that this morning a message suddenly come to the screen, warning me that there was an error in video material, last night, I clicked on a button, I think for load more information. and I took this perforated cap of it: -.

  http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg

  I thought it may be useful to view the actual complete message rather try everything and paste the info., ok to be honest I've not noticed it allow you to copy to the Clipboard, but good (oops lol).

  I know there is a topic on a similar error, but I didn't want end-to-end on this discussion because I assume that it should be for this mistake of people who will be discussed, mine may be slightly different, I don't know... I followed the instructions given in this discussion and I checked the Device Manager and no material defects are appearing, btw it is said in the Manager of peripheral devices, graphics cards, it's a Mobile Intel 945 GM Express Chipset Family, I'm sure that all laptops A200 15I have the same card, but I thought I would just make it clear that. Incase that wasn't the right thing to check I also checked under "Audio, video and game controllers" (as the error says it was a video hardware error) where it lists the only as being "Realtek High Definition" Audio and I checked the properties, both under properties it says that the device works properly, without signs of defects...

  The thing is, I had read somewhere online that there is a problem with the graphics or video cards. I had read that they can be glitchy and sometimes break after a year. I also asked my father about it and we looked at it as a graphics card Intel that came with this laptop, which it is, and we counted that the Intel chips is as reliable as any other brand really... so I don't think there should be a problem, well that is there I have until September next for repair prior to the expiration of the warranty!

  What surprises or sort of worry, however, is that the error message was only introduced to me this morning. It dates from error, as having occurred at 19:53. I use it at night last, and infact, I went to take a shower and I put the laptop down before you go take a shower at around 19:35, I assumed that its ok just close the lid and it would automatically go into hibernate mode or something similar (?) im wondering if that had something to do with it as I 19:53 would have been about when I came back and lifted the lid/screen again to use the laptop again... I can only assume, given the time, he cites, is what caused the failure?

  It gives me the option to "update driver software" and "hardware change analysis" in the Device Manager, can I run both, or one of those who maybe? is this a common problem? should I worry at all etc...

  Any help is very appreciated, if more info. Please let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics, I have an old version of Paint Shop Pro, which I installed it yesterday morning, it seems to install fine, it is Jasc Paint Shop Pro 7, I have also some programs of converter (for files vid, 3GP and other things), scan antivirus AVG, Spybot Search & Destory DBPowerAmp, FTP Commander, Quicktime and Real Player, pretty basic stuff like that, nothing, just my old photos and vid files I transferred from my old laptop XP to it, in my documents... I don't have all the Senior Games motorized or complicated or anything else like that installed. Also at that time, indicates the video hardware error message, everything that was in progress when I got the cover down (or before putting the lid down) would have been Windows Live Messenger (although I'm pretty sure that I registered before putting the lid down) and an IE window , im pretty sure that's it, I was not working on anything just check the ' net...

  There are other things I noticed as I thought that maybe I should mention (?), something I've noticed he's doing is the screen goes blank and then back very quickly, a lot. I already asked about it a day or so there at that time, I realized he was only doing that before loading the "Windows needs your permission to continue" window/message, who apparently its supposed to do and something to with the computer to switch to display the normal desktop to the secure desktop, I kind of understand lol.
  So I think that's not something to worry about but I noticed during the lastday, that the screen seems to do it more, goes blank then back again, even if the authorization message does not appear.

  For example, this morning, when I first put on and am went to check out my home page, I clicked on a link at the bottom of the page or anywhere where to load another page into the site and display deleted for a while before coming back a second later with the requested page. Is this normal too? or an associated Vista glitch, or is it possible that there may be a small problem with the monitor? Incase of im guessing it can be more than one thing in Vista, but I thought I would ask here, I decided to not pay for any extra insurance/warranty extension because I am very careful with my items and take care of them and so I'm being careful to try to spot defects early, while they may be repairable under the basic warranty and what-not...

  Another thing I noticed is that start with, when I pressed on and kept the 'FN' key, a variety of icons, black and white appeared on the screen that told me what F button (s) to use to make certain adjustments, there still is that when I try right now, but at other times, it does not show icons , no matter how long I hold down the "fn". That didn't matter because I can tell by the symbols on the keyboard press what buttons but its just inconsistent, is there a reason why sometimes the row of icons on the screen will appear when I press and hold the "FN" key and other times it doesn't show at all?

  Also sometimes if I move the slider to the right to the top of the screen, these icons loading as they always seem to be located at the top of the screen, but sometimes it's a problem, if im trying to click on something else and one of these icons rises instead... I'm sure that you can disable this option in sort , but I'd be worried that the icons do not always show when I press and hold the right Button (?) just try to be careful!

  I think that this post is long enough and I don't see what else I could possibly add to help, so I'll leave this here. I don't want to sound too paranoid, but thought it is better to talk about this kind of things incase someone recognizes these defects/errors and can recommend a way fast to resolve potential problems before they can develop into what whether it is worse... Thank you very much in advance for any help on any of these issues!

  (mods let me know if im wrong to include so many things in a subject, I fact kind of this quickly and I apologize if im breaking any rules, I don't want to, if possible please break this into a few different themes or I can do it, although ill be at work frm 2-21:00 today so maybe not back and able to check here until Thursday morning (October 4))

  Hey Isla

  Your message is really very, very long. I think it's too long to read twice ;) s

  . Regarding your questions on this laptop well. Looks like you have installed many applications and 3 third party programs. In such cases, it s not easy to say if these problems are software or hardware related. But I guess that its software.

  I checked your screenshot pic, but I've never seen this error message. But it looks like something wrong with the graphics driver. The message says something, live events of kernel
  The core services are required by other parts of the operating system as for example graphics card driver.

  In this case I recommend updating the graphics driver. According to you, this message an Intel GPU. So you can see the Intel page for the driver for the graphics chip compatible.

  With regard to the key issue of the FN;
  The Toshiba FlashCard utility controls the key features of the FN. I read in this forum that this application does not smoothly run and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The utility of FlashCard is a part of the Toshiba value added package.

  So finally a tip more:
  You should always check the updates of Vista on the Microsoft page. This operating system is not perfect and Microsoft releases hotfixes and patches very often

  I hope that it would help a little.

  If necessary just ask for more information :)

  Concerning