Problems on Equium A60 - Powerpack adapter beeps

Similar Questions

• Equium A60-155: adapted wireless card

  Hello

  Well a lot of topics is affected by the subject I still don't know what wifi card would be most appropriate for my laptop. Do I need a with antenna or switch? I would definitely prefer an integrated.

  Thank you

  Hello

  As much as I know internal WiFi port is not available on this device. In this case, it of not possible to put an internal Mini PCI WiFi card in this device.
  Well, you can use a USB WiFi key to use the wireless connection.

  Good bye

• Equium A60 - defective power cable

  The power supply for my laptop began to divide and although I have wrapped in insulating the split tape, it still does more. Annoyingly, the separation is the wire that connects the computer (which is attached to the battery), so I think they're pretty difficult/expensive to purchase.

  Anyone know where I could get a new track that doesn't cost the Earth?

  Thank you very much!

  Hello

  they are not very expensive, this site-> http://www.pcupgrade.co.uk/productdetails.asp?ProductID=3146&categoryid=368 wants only 40 pounds for a such AC, so if you use "Google.com" and type 'Equium A60 Ac adapter', you will get many results on adapters CA / CC for Equium A60... :)

  Good luck

• Equium A60 - blue screen at startup

  Hi... problem with Equium A60. Running on Windows XP SP2, when I start the computer I see the windows xp logo and then all of a sudden it is blue screen and try to restart. What could be wrong? Any sugessions...

  Thank you

  Try to start in safe mode. To do this turn on the unit and start pressing F8 immediately, in the advanced options menu, select Safe mode. Log on as administrator. When safe mode has loaded right click on my computer-properties online-online advanced settings-online Startup Recovery & -online the system failure => to uncheck the box that says automatically restart => click OK.

  Then stop and restart normally. Now when it bluescreens, you should be able to see the complete error message. You can have a STOP error with a lot of 0s in it. Write it down. Type the STOP in the Google code or support.microsoft.com and see what happens or post it back here, chances are that in this regard, there is a knockout. unless it's a hardware problem.

• Equium A60-157 - PCMCIA or USB WLan adapter

  I have an Equium A60-157 and you want to add a wireless adapter.
  Can someone advise me on a PCMCIA or USB adapter suitable for this model.

  VIN.

  It s indifferent if you buy a card PCMICA WLAN or WLAN USB stick.
  My opinion would be a USB key, because you can use it on a PC too.

  I put t have much experience with these WLAN sticks but I would buy one from the manufacturing of your router. For example, I have a router of AVM and a stick of AVM WLAN.
  So you can be sure that s has no problems because you have from different manufacturers.

  I hope I could help a bit.

• Equium A60 - beeps at start

  When under tension over an Equium A60, I get a long beep (3-4 seconds) and he then turns off; no error on the screen and no sign of activity.
  I'm assuming that there is a message error and probably serious enough, but no idea what it means.

  What does a single long beep mean?
  Be it on the mains or battery power, or with memory removed makes no difference.

  Thank you

  I guess that there is a hardware problem on your motherboard.
  A long beep is displayed because the laptop can not pass the POST (power on self-test) and, therefore, the machine doesn't start.

  Unfortunately, it's not easy to say what could be wrong with your laptop
  In your case, each unique material part should be checked; RAM, CPU, motherboard, etc.
  But I don't think that you have all the material resources useful and enough technical experience in this regard.

  In my opinion you have only one option, and it is ASP.
  The authorized service provider may check the laptop and can run diagnostics tests

  I wish you good luck

• Problems with the graphics to Equium A60 driver

  Hello everyone,

  First sorry for my bad English.

  I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

  I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
  Could someone help me find a solution to my problem?
  Thank you very much

  Eurytheus

  Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

  Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

  Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

• Equium A60-157, problem after update BIOS 1.90

  Hi all!

  I've had my Toshiba Equium A60-157 for two months. I've updated the my bios twice. First of 1.70 to 1.8 C and from 1.8 to the current 1.90 (common at the time I made this post).

  I noticed that as soon as I used my recovery DVDs to restore the laptop to the default constructor, I had a problem with the main user account that is normally created after the completion of the recovery strategy.

  Whenever Windows would open a session after the recovery account generated, a popup would display a message similar to the following:

  "Windows can not load the profile and connects you with a temporary profile." No changes will be saved. "

  He also said that this problem was maybe due to incorrect permissions, or something like that. The pop-up window also contained a 30-second countdown before opening in windows with the temporary profile. As indicated by the pop-message no changes would be recorded. I could even change my user account image.

  I ran it again the DVD of recovery only to get the same problem. This NEVER happened when I ran on the original bios 1.70, bios recovery DVD AND 1.8 c.

  Anyway I came up with a solution to this problem, which only caused me no problem at the present time.

  I just logged into Windows mode without failure, entered the account administrator, created a new account and deleted the account of departure (created at the end of the recovery program).

  So far, the user account-wise, everything back to normal.

  If the recovery strategy or the bios did not cause this problem, I would be grateful if someone could give me some possibilities of doing just that.

  I don't want to get updates of bios from 5-10 down the road, only to find out that my recovery DVD does not work.

  Fact the DVD should be updated as well as the recovery bios?

  Thanks for your time.

  Hi, Conrad

  Can you please tell me why you do the updates to the BIOS? Have you had any problems? I use my unit for close to two years and I didn t make any BIOS update so far. If everything works well, it is not necessary to do an update with the exception of some Microsoft updates that make the OS more secure. Don t do any update if it is not necessary.

  In any case, I am very confused with your question. Normally, Recovery DVD should not be updated. The BIOS updates are useful if there is a hardware conflict or a problem and not a problem using the operating system or any software.

  It will be interesting to know why you're doing the recovery procedure each time after BIOS update.

• Equium A60: USB Hub problems

  I have an Equium A60 and that you just bought a USB 2.0 with 4 ports hub, but it is not recognized when plugged into one of the usb ports
  It causes also the PC hang on shutdown and startup
  Hass someone at - it had similar problems

  Hello

  As far as I know for some USB hubs, it is necessary to install a software that can help to use correctly. Some of them are plug and play devices and there is no need to install any additional software.

  I use Satellite 1900 and also have USB hub and it works correctly. In my case, it was necessary to install the driver before the hub is connected. A demon of the mine has Belkin hub and in his case, the driver has been installed after that the laptop has recognized a new hardware component.

  All this is based on the producer of hub. I hope you have some instructions how to connect the hub to the laptop on the right feel.

• Equium A60-157 (PSA67E) - need recovery disk and AC adapter

  Can Hi anyone help me please? I get an old work Equium A60-157, sorted to the backlight inverter but I would like to get a drive recovery if possible because it can have several system files on this subject I found on this site.

  Certainly wants power! must get a more powerful adapter, as it is creaming my 4. 5 diet sometimes, but seems to be a good laptop.

  Thank you very much David

  Hello

  > to get an if possible recovery disk

  Click here for [recovery disk | https://backupmedia.toshiba.eu/landing.aspx] if it is available to order

• Equium A60: CD and DVD reading problem

  I have a laptop that uses a carpet Equium A60 * a UJ-811 t dvd/cd-rw. For some reason any all of a sudden when I play a music CD or a DVD it jumps slightly. On audio, it's like a constant ripple, and the video jumps a few images every few seconds. Don't have an idea why its doing so. Any help appreciated. see you soon

  Hello

  He s strange. It s easy to tell why it occurs. For me, it looks like a constantly driving rotation. You have other problems to drive with no media music or a movie?
  Other possibilities that you can see are the properties of the drive.
  Please see the properties of the drive. You will find a hardware tab. Please select here your player and press the properties button. In the Properties tab, please check if digital playback is enabled. You should also try to disable this option and check if this problem occurs again.

• Equium A60-155: ATi Mobility graphics card problem

  Hello

  I have a laptop Equium A60, recently I am getting error informing messages than the "display driver ATi2mtag has stopped working properly.
  I have reset my machine as told to do the error dialog box. Reset works fine, but the laptop crashes to the desktop, when turned off and on again once I get the Safe Mode screen.

  I reinstalled the driver for the graphics card several times, and the error persists through safe mode. The returned error and trying to open in safe mode, the machine flashed a blue screen of death, too fast for me to read, even applied for each of the available options. I was unable to cross this safe mode selection screen.

  As a last resort that I reformatted my laptop, using the Toshiba CD recover but the error persists, with regular driver display and the actual machine crashed.

  Since the reformat, I reinstalled the display drivers, and the problem persists.

  I downloaded the drivers from this site and the problem is still there

  You know a possible fix or solution to this problem? I am a competent enough and user of computer knowledge, so do not be afraid of getting technical in your response.

  Thank you

  Jake Houghton

  Hello

  This problem occur immediately after the operating system starts or after several usage time?
  If this issue occurs after a several time of use, so it could be an overheating problem.
  In this case, you should check the cooling modules. Check if the fans are working properly.
  Try to clean it with the vacuum cleaner.

  If this doesn t solve the problem if you maybe there is something wrong with the graphics card and you will need to contact Toshiba service for assistance.

• Graphic 3D MathCad for Equium A60 problem

  Hi all

  I have problems with Mathcad MCad (2001 - 12 Mcad) work on Equium A60. After trying to do any kind of 3D terrain (land surface, for example) Mathcad crashes. This problem is only on my laptop. How can I solve this problem?
  Marina

  Hello Marina.

  Well, I put t have ideas why you machine has had problems with this software, but first of all, you should try to update the graphics driver. If the problem of images fixed the same, so you should contact the manufacturers of MathCAD. Maybe they got patches. I found this site: http://www.mathsoft.com/services/technical_support/

  Good bye

• Equium A60 - problems of severe graphics

  I own a ' Equium A60-156 532 P4 / XP HE/256 MB / 40 GB/15TFT/DVD SuperMulti ' which I've updated with 512 MB of ram, so now it has 640 MB of Ram for system with 128 MB for graphics.

  My problem is, even if it meets the requirements of apparent minimum configuration for various games (such as "Fable: The Lost Chapters"), it does not correctly display in the game. The grass is white, yellow water, unreadable text, etc etc...

  I don't like the graphs such as shading and ripples in the water, I just like it so my laptop actually displays the right colors during a game!

  I tried the latest driver from the Web from Toshiba, the Windows Update site AND even sought the drivers on the ATI site with no luck.

  My laptop is doomed to be the trash and not play games or is there soemthing I can do?

  Hey Joe,

  Unfortunately drivers grpahics for your laptop has been deliberately out of engineering to prevent the graphics chip to produce too much heat.

  As you probably know, the graphics chip is integrated on your motherboard in order to reduce the space and there is no separate cooling. Graphics drivers are tailored to remove those aspects of the functionality of the chip which would tend to produce too much heat.

  It is generally true that the latest games tend to use features that were omitted in the drivers from your laptop.

  Unfortunately, there are no eassy solution to this problem as pilots of the last chip manufacturer won't load properly on your laptop without changing.

  I suggest that you try the latest drivers for your graphics chip of http://www.omegadrivers.net/, but beware your graphics chip to overheat as this can cause the pertubation requiring a new mainboard.

  Kind regards

• Equium A60 CD/DVD Drive problem?

  My cd/dvd on my laptop Equium A60 drive seems to have stoped working. If I put a disc in the drive of the yellow light on the drive flashes then nothing happens. If I go to my computer, that the drive is most recognized either, and only the hard drive is displayed. I recently downloaded the bios update and I don't know if it affected it?

  Can someone tell me what happened or how to fix it?

  Thank you very much

  Hello

  Please check if Device Manager the drive occurs.
  Try moving the drive and reboot your device. The operating system should recognize the drive again.
  Please post again if the problem persists.

  Good bye