Problems on the Satellite M30X 124

Hello

I have a Satellite M30X-124. He stopped the electric network load when the laptop is turned on. The battery seems to be OK and witnesses to support lights online when I play with the charge lead to the back of the computer. I tried another charger and it is certainly not the charger or the charging cable. The problem seems to be at the back of the laptop when the mainstream point of entry is.

I referred to this problem in the decision-making authorized Toshiba service and they believe the problem is the motherboard and I would like to replace it (they have not seen or inspect the laptop). The only problem is that the replacement of the motherboard is like buying a new laptop for high cost. Any ideas?
I believe that the problem must be that he connection between the charge lead and the entrance to the main power supply does not work and there may be something loose that can be fixed. I'd rather do something myself rather than spend a lot of money.

Any ideas please.

Thanks for your help
Anwar

Hello

I wouldn recommend you do it by yourself, but could try. I heard that this phenomenon comes from a loose AC plug that must be welded to the card.
Here´s a site that should help you in your mission: http://www.irisvista.com/tech/

If in doubt then I suggest you buy a new machine, rather than spending money for your old beautiful Clipboard. ;)

Welcome them

Tags: Toshiba

Similar Questions

  • Connectivity to the Satellite M30X USB problem

    Hello everyone,

    I have a problem with the USB to the Satellite M30X connectivity. I purchased a M30X and had problems with connecting devices of differnet in one of the USB ports.

    I tried to solve his problem and but nothing resolved.

    Goodbye, Meier

    Hello

    Rudi is right. There is a new update of the BIOS and it should solve the problem of USB.

  • Satellite M30x-124 - problem with Seagate momentus 160 GB

    I have Toshiba Satellite M30x 124 and change the hard drive. I've set up Seagate momentus 160 GB but do not work. BIOS detects the hard drive but when I put the cd with windows xp and I want to install windows xp, nothing to do. Where to find the bios with attendance more hard drive
    Linux is the work, but windows... :/

    Sorry, but my English is not good.

    Hello

    The clear issue and can be resolved very easily:
    Reason:
    You use a non compatible HARD disk

    Solution;
    Replace the HARD drive with the compatible!

    The laptop seems to be supplied wit a 80 GB IDE HDD.
    I advise to use the same or a HARD 100 GB / 120GB.

    Concerning

  • Satellite M30X-124 stucks to 591 MHz (Centrino 1.6 Ghz)

    Hello world!

    I have a 'M30X 124"which normally takes place on 1, 6 GHz, when I use it with my diet.
    No matter what I change on the speed of the processor in this Toshiba tool, it still works on 591 MHz!

    I have not used for 2 years. Now, I've seen this problem.
    My motherboard has been changed until I stopped using it. I read on some forums that it is a problem of communication of processor/motherboard... and it has a firmware update (or other) on CD that solves the problem. I tried this fix firmware from another laptop, but without success.

    Anyone know this problem?
    Where can I find this fix - CH?

    Thanks in advanche!
    Steven
    ______
    Toshiba Satellite M30X 124
    Celeron 1, 6 GHz
    Windows XP SP3

    Hello

    I doubt that you can solve this problem.
    The firmware must be updated by Toshiba service technicians

    This is necessary after the exchange of motherboard or the CPU will be blocked to 600 Mhz.

    Get in touch with ASP in your country and ask for help!

  • Satellite M30X-124: battery not charging

    Hello

    the text by Googel translated hopes help.
    I have a laptop Satellite M30X-124 and has the following problem:
    My battery via the power supply with the company does not provide. It is emty completely also with the operation of the line and load yourself that in condition.

    It has been recently even others. The laptop was loaded with the operation on line and/or of the Akku is was also not unloaded. In addition if the Akku is empty, now shuts the laptop out despite the power supply and now still needs are better fully charged. Who me always been noticeable load ad (third LED) is orange and green afterwards. If the power supply is plugged in and I turn on the laptop, the LED does not glow. Also not if the battery to power after sick leave (the company) only if the Notebook on am, joint line operation and load, shining orange LED.

    If I switch now again start all over again from the front to the Akku'm still empty.

    Now to my questions:

    Should I have to exchange the battery? I use it for 1 1/2 years.
    The laptop has a defect?
    Should I have an error with the attitudes during the administration of energy? (however never has there that have changed) the connection to the laptop has it a mistake? Or the power supply?

    Please answer if possible.
    Sorry for the bad English

    Hi Rainer

    Your English is very difficult to understand, but I understand that you have problems with your battery.
    If you re not able to cherif battery so possibly the power supply is out of life.

    You write that your battery has worked for about 1.5 years. You know that it s able to charge and discharge the battery for about 500 times and after this period (1.5 to 2 years) the battery will discharge performance and the news is necessary.

    This news also knew not to me but after reading in the user manuals and field on some notebooks sites survey I m now a specialist battery ;) lol.
    Similar issues can occur for example with mobile phone batteries.

    I don t think that your laptop is affected by the battery Exchange program but of course, you can check the number.

    However, I suggest to replace the battery and check if it works.

    Hello and greetings from ith Italy ;)

  • How to redefine the keyboard of the Satellite M30X?

    Can someone help me to redefine the keyboard of the Satellite M30X?

    Unfortunately my mother tongue (i.e. Polish) widely uses the right Alt to produce some unique signs. There are many schools, but I prefer to use thumb to press. Unlike other laptops that I used this key on my current Toshiba is far right, making it impossible to strike by the thumb. There is an empty key right next to the space bar. In my setup, it is equivalent to--------, and I want to make another right Alt.

    Thanks in advance

    Witold

    Hello

    As much as I know there is no possibility to redefine the keys on the keyboard. The only thing that allows you to redefine is the keyboard input language. This option, you can find in Control Panel under regional and language options.

    Good bye

  • A few questions on the upgrade of the Satellite M30x 154

    Hi all

    I plan on upgrading my Satellite M30x-154.
    I was wondering if you guys would like to know before upgrading if the things I want to buy this would work.

    I would change my Hitachi 60 GB for a Seagate 100 g (link following) would this work?
    http://www.ebuyer.com/product/131274

    I have BIOS version 1.90.

    I intend to install Vista on it. I'll be able to use an OEM copy?

    I currently have 1 GB custom memory Idleness I plan on implementing to 2 GB inside
    It still works fine?

    See you soon
    Robert Knight

    Hello

    1 upgrade HDD. I think it will work because some models of satellite M30X was also built with 100 GB directly from Toshiba.

    2 OEM Vista will not work because the OEM of Vista version needs a special BIOS for activation (BIOS for VISTA). You can install it but needs activation after a few days.

    3. the satellite M30X is 2 GB max memory, which means that it is possible to install strips of memory 2 x 1 GB... but I can't say if Crosiar memory will work but normally they work. The original partnumbers memory for a 1 GB module is 1024Mo PC2100/PC2700 (PA3313U-1M1G)

    I hope this will help you.

    CU

  • Satellite M30X-124: Config Free tool

    Hi, I just installed WINXP pro + Sp2 on my M30X 124.
    I would like to install free Config tool. Anyone know where to find?

    [Edited by: admin December 20 04 20:16]

    I had the same question. I tried to reinstall it but the necessary update to the SP2 version is not available on the website and the CD has the previous version.

    It was easy enough, however, just go to the download page for the M30 Satellite instead of the M30X and it was there!

    http://support.toshiba-tro.de/Tools/updates/Windows-XP-SP2/config-free-v49057/confree-XP-49057-en.zip

    Simply click on the link and download. :)

  • BIOS reset to the Satellite M30X

    Hello

    I own a Satellite M30X and its start not more after soldering a new D/C. It turns on and the fan starts to operate. But the screen remains black and after 2 seconds, the fan stops and everything is frozen (can not turn off by pressing the power button). I hope that I can't solve the problem by resetting the BIOS by the hardware.

    Is it possible to do?

    > after soldering a new take D/c
    And who did this work? You or your provider?

  • How to find the serial number of the Satellite M30x

    Over time, serial number has worn away from the bottom of my Toshiba Satellite M30x. is there another way that I can know what it is?

    I m not 100% sure, but maybe you can find the serial number in your document that were shipped with the laptop.

  • Connection problem with the satellite C660 - 24L

    Hello world

    I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

    Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

    A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

    Computer behaving the same way when connected and disconnected from the mains.

    All other devices will connect to the router talk-talk with no problems.

    Any help is appreciated, thank you in advance.

    Lewis.

    Post edited by: lewlew

    Have you noticed a few problems if you use the local network connection?
    Original Toshiba WLAN driver is pre-installed on your computer?

    To be honest, it is not easy to say why this show is starting to happen so suddenly.
    Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

  • Sound problems on the Satellite A100 (PSAA8)

    I constantly have sound with my Satellite A100 (PSAA8) computer laptop problems. While I hear the windows starting noise and beeps (most of the time), I hear no sound of things like Media Player, CD, DVD and iTunes. I get the following Media Player error message: "Windows Media Player cannot play the file because there is a problem with the audio device... ».

    I have the standard pre-installed Realtek sound thing on my laptop that could be the problem, well in control panels, sounds, he says it works well. Also in Control Panel, sounds, most of the things are greyed out, so that I can t adjust the volume levels or even play sound noises.

    I tried to download a newer Realtek driver from Toshiba support center to see if that's the problem, but I don't know what to do with the zip file of the suggestions? Please, please, please can someone help?

    Thank you
    Marc

    If please don't post twice and follow your first thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22313

  • Problem with the Satellite Pro 2100 and new modules of RAM

    Hello

    I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
    My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
    Here is the code of the modules:
    KTT3614/256 (original)
    KVR266X64SC25/256
    256 MB pc2100 both.
    Starting the PC with any of them, as well as the modules are both compatible.

    Any ideas?
    (Sorry for my English but I'm Italian: D)

    Post edited by: DaK_TaLeS

    Hello

    the second location of memory perhaps is the problem.
    Try to start with a module in the second slot, first an empty slot.

    Good bye

  • The BIOS 1.90 solves all problems USB on Satellite M30X?

    Hello

    A few months after buying my M30x, I bought an external USB HDD to 200 G. The drive kept just disappear during use, so I took over, but the repair shop said they found nothing wrong with it. How you introduced me what s, update the BIOS 1.90.

    In any case, after the upgrade everything seemed dandy for real,
    and the drive worked fine. Fast forward to where the 2006/2007
    I bought two more external drives, a 2.5 "160G and
    a 3.5 "500G. The 160G is back to the store because he kept
    display errors, but he did on other machines too, so I'm
    get a new one soon.

    Now, the 500G seems to work without problems and I did 200G of this already, but this week training started acting funny. First of all, I dual boot Win XP and openbsd. OpenBSD disk went all crazy and to attach and detach sometimes 48 times in a row... so I said okay, maybe a bug in their implementation of USB. I have run windows again (ugh) and start copying files autour just randomly and bam, the disk disappears, and I get a screen blue, followed by a quick restart...

    at this point, I looked around as if there is an another BIOS update because my sixth sense tells me, it is still not right with 1.90, cause 2 operating systems may not be bad so I'm very inclined to believe that he is not yet 100% correct.

    Someone has seen something similar?

    Hello

    As much I know Toshiba does not provide any information what has changed with the new versions of BIOS and as a result, you could try only update the BIOS version and hope

    The 500 GB HARD drive is great device HARD disk that needs a lot of power?
    USB ports for laptop contains 500mAh and if the device needs more power as 500mah that it of possible that external devices may not work properly.

    I m not an expert in openbsd, but you can disable the saving on the simple USB ports on Windows.
    You can also try to remove the USB ports in Device Manager and after new restart you windows should recognize the ports again.

  • A few problems with the Satellite U920T-100

    Hi guys,.

    my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

    The questions are:
    -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
    -It starts not at all, only after a few attempts
    -It will not stop
    -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

    New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

    Also: WLAN connectivity is really bad.
    The laptop is not able to find networks, while my laptop has no problem with it.
    And when he finds them and connect, the connection be lost - once again: no idea why.

    That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

    I have reset factory?
    Run through some specific tests?
    Or is is hopeless, because there are so many problems with it?

    I'd appreciate your help!

    Hello

    > I should factory reset it?

    I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

    Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

    From my point of view, the recovery of the system is the first step, you should try to solve the problem.
    In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

    Hope my advice might help you a bit

Maybe you are looking for

  • Compressor 4.2 and mts video

    I have FCP 7 and Studio Applications, but FCP cannot open a session and import AVCHD 1080 p 50, 1080i50 only! So I think, I buy 4.2 for this compressor when the compressor can convert AVCHD 1080 p 50 in PRORES 422HQ. The compressor in the FCP Studio

  • hp1315xi printer all in one

    What should I click on go direct to download for printer hp 1315xi all in one download from hp

  • Transfer of programs & files to a new laptop. __

    I would like to transfer the programs and files that I use on my Vista Home Premium PC to a laptop for use abroad.How can I do this?

  • V515w - printer does not print

    I would print a document showing the status as printing but the printer that goes on, but don't not print anything. Document remains in the print queue. A few times I have cleaned the printhead through interview and it prints what is in the queue. An

  • Cannot rip CDs or change the rip settings

    I can't "rip CD" or change the settings of "rip".  When I try to copy a CD I hit the rip button and I get the error message "CAN'T RIP ONE or MORE SONGS on this CD".  I tried several cd.  When I try to change the RIP SETTINGS I get the error message