Problems related to applications of several modules where the skins loaded by loadStyleDeclarations

Hello

I am having trouble with an application of several module.

In this application, I have a main swf file that loads a skin swf file using styleManager.loadStyleDeclarations (...)

The skins are correctly applied to all elements of the main application and all of its direct modules (Modules responsible for the main application). If however a module load again the modules of the child, the styles seem to no longer apply and I have to add a section of loadStyleDeclarations to these modules in order to have their style correctly.

What could be the cause of this?

Chris

Gen... I wonder why I always look for an answer to a problem and as soon as I ask for help, I found the solution myself.

My custom loader component does not seem to have its 'moduleFactory' property if I used it in a module. So when the child module loading the moduleFactory has been set to null, sort of broken chain at the root-styles. Manual adjustment of the moduleFactory before you start loading my modules did the trick and the chain was restored... and presto! My styles began to work.

That may help a chap unucky have the same problem, then perhaps this thread will be useful after all.

Chris

Tags: Flex

Similar Questions

  • Recommend products OR for my application (controlling several instruments at the same time)

    I'm new to Labview, currently only using the trial version.      There is money in my budget to buy control software, but I need to qualify my needs.

    What I try to do is to control several pieces of equipment to test as a single system, which allows me to perform automated on conventional measures

    and digital two way radios.

    Here is a list of the material I want to control:

    First of all, my controller is a & Rohde Schwarz 3 PSL.   Fully GPIB active and ready.  It is the PC control software will reside on.

    Equipment:

    Spectrum analyser Rohde & Schwarz FSEA 30 with modulation analysis package digital option B7

    FSEA 30 second, same configuration

    R & S AMIQ4 I / modulation generator Q (files of the software residing on the PSL3)

    Generator of analog signals from R & S SMY 02

    Agilent E4431B analog-to-digital signal generator

    Agilent E4406A spectrum analyzer/digital radio test set

    E4418B Agilent RF wattmeter with sensor

    General Dynamics R2670B service monitor

    A typical application will be a test of classical radio on VHF or UHF analog channel.

    The idea is to enter pass and receive frequencies through Labview or any software is best suited for the job, as well as modulation parameters.

    and have the following things occur: assume usage of 150,000 MHz with a FM frequency modulated 1 kHz sounds modulated to the deviation of 2.5 KHz

    in total, with your 127,3 Hz subaudible to a gap of 300 Hz

    Test phase of receiver: send commands to control of instrument of Agilent E4431B signal generator.   Level set to-60 dBm.  Set to 150,000 MHz frequency.  Set

    Audio 1 to 1 KHz and audio tone 2 to 127,3 Hz at a level of 8 pecent of your 1.  SD total do not exceed 2.5 KHz.      Inject the test signal into port RX

    on the radio.

    The value R2670B SINAD function, related to the radio via the audio output port.

    Signal level to ramp down to the SINAD falls to 12 dB.

    Increase the level of the signal to the attenuation of 20dB.   Measure the audio distortion.

    Testing of transmitter: using the attenuators appropriate necessary on the analyzers of spectrum, and/or using a switched network of wiring.

    place radio to transmit using above specifications frequency and modulation.    Analyzers to receive on the frequency designated value

    and measure the transmitter specifications, including nonessential radiation measurement and harmonics.    Measure actual output power

    Via E4418B-power meter.

    I use two monitors to perform multiple tests in a same transmission. One is optimized for spectral purity tests while

    the other analysis of modulation characteristics.    Frequency, duration and RBW are defined according to the needs.

    When you test a digital radio, the signal chain is slightly different.  The AMIQ I / Q modulation generator s I / Q outputs are sent to the

    I / Q inputs on the Agilent generator, the power is on to accept external I / entered Q and the FSEA Spectrum Analyzer (an a)

    the) is passed to a preset that implements all relevant digital parameters so that it can be used to directly evaluate the digital transmissions.

    It is not a very developed in the planning system, but I do not know now whether Labview is everything I need or if I'll need to Teststand or another

    software packages.

    I'll probably want to ask for some advice on how to get this set up, eventually.

    LabVIEW is more than capable of this task. That's what it was designed to do. Use the help > find the instrument Drivers to find and install the drivers that you can use to control and read.

    TestStand generally requires the use of a programming language. It runs the tests that you write and provides functionality built for the production of record and report database then you would need to write these modules yourself with LabVIEW fair and some add on box to tools. For a single test configuration, it is perhaps an exaggeration, but it is interesting to watch as an addition.

  • Application appearing like 'Module' in the list of applications

    I noticed that in the BB application list, my application is profiled as a "module" and not an "Application."

    The application is configured as an application of BB.  In the generated files from the CAP, I see 'RIM-Midlet-Flags = 1', which is the correct value (after this post) (application w / auto-start).

    In the "Blackberry App Descriptor" in eclipse, the app is listed as "Blackberry Application" application type.

    Any thoughts on what may cause it to be mislabeled as a "module", when it should be "application"?

    Ahh, he brightened. Thanks for the info.

  • Where the down load OMAF

    Hello. I need to download the user guide and the guide of the administrator on the OMAF

    Thank you

    Richard

    Hi Richard,

    Have you actually spent by the link I shared...

    Its all there.

    Oracle Application Mobile Framework download

    Oracle Mobile Application Framework is available through the integration of development environment. Choose your favorite IDE:

    Oracle JDeveloper Studio Edition

    After installing JDeveloper go to help-> control upgrade and choose to install the Oracle Mobile application infrastructure.

    Oracle Enterprise Pack for Eclipse -choose the module that includes Oracle MAF.

  • Problem with run invoke vmscript several times on the same VM

    The following is a test command I am running

    $PCCreds = Get-Credential
    $VM = Get-VM -Name "Test-VM"
    while ($VM -ne $null) 
         {
         $VM | Invoke-VMScript -GuestCredential $PCCreds -ScriptType Bat -ScriptText 'whoami' 
         Start-Sleep -Seconds 10
         }
    

    While in this infinite loop, I receive a mixture of success and failures

    ScriptOutput
    ----------------------------------------------------------------------------------------------------------------------
    Test-VM\user
    |  
    ----------------------------------------------------------------------------------------------------------------------
    Invoke-VMScript : 7/9/2012 11:22:12 AM    Invoke-VMScript        While performing operation 'Connect to host service '
    https://vcenter.local/sdk' at port 902' the following error occured: 'Unknown error'    
    At line:15 char:45
    + while ($VM -ne $null) {$VM | Invoke-VMScript <<<<  -GuestCredential $PCCreds -ScriptType Bat -ScriptText 'whoami'
    Start-Sleep -Seconds 60}
        + CategoryInfo          : OperationStopped: (:) [Invoke-VMScript], VimException
        + FullyQualifiedErrorId : Client20_VmGuestServiceImpl_VixWaitForJob_VixError,VMware.VimAutomation.ViCore.Cmdlets. 
       Commands.InvokeVmScript
     
    ScriptOutput
    ----------------------------------------------------------------------------------------------------------------------
    Test-VM\user
    |  
    ----------------------------------------------------------------------------------------------------------------------
    

    With an array of objects of virtual machine using this same code seems to work without problems. These virtual machines are distributed over several hosts.

    My guess is that this has something to do with sequential to the same host, reaching a connection limit max, as well as the connection is not completed after a successful execution of the cmdlet. Has anyone seen this problem before?

    Against what version of vSphere are you running that?

    And are you using PowerCLI 5.0.1?

  • Oracle Application adapt several details with the XMLPayload only

    Hello

    We gradually the Oracle application in Peoplesoft using Oracle application adapter.
    In our XML sales order load several details in a load of XML.
    BUR our details only one sales order of the system target.
    is any possibility to split the load XML.
    You can help me pls.

    Payload of samples
    < sales >
    < order >
    < > 1200 orderno < / orderno >
    < ordered details > test < / ordered details >
    < / order >
    < order >
    < > 1201 orderno < / orderno >
    used2 < y details > < / ordered details >
    < / order >
    < / sales order >

    I need to send two of the transaction in BSE.

    Example, I get 10 order details, that I need to split into 10 different on the target system.

    You can a ple help me.

    Thank you
    Rahul

    Multiple sales in individual sales division is to do before sending it to the Oracle application adapter in BEPL/BSE/OSB. As far as I know Oracle Application adaptation for Peoplesoft has no option available.

    Transformation of splitting can be easily done in BSE/OSB/BPEL.

    Thank you
    Maury

  • In the payments/accounts payable modules where the payment reference number is defined?


    Hello

    I hope someone can help. Is the reference number of the payment, an internal sequence number of Oracle or can you change it in the app? If Yes, where?

    Thank you very much

    Paul

    I managed to find the information I was looking for this topic. Thanks anyway... Paul

  • Application manager not to exceed the initial loading square

    I can access the site, click to download After Effects compared to the Creative clouds, the browser will ask then if I want to use the client of creative cloud then charge Adobe Application Manager but then the Application Manager does not move beyond the blue square "loading".  I'm on OSX 10.7.4 any help would be greatly appreciated

    Hi Ben,

    How long has slept on the blue squares, loading screen? I saw him take a long time, could leave for a while and see if never changes.

    -Dave

  • several modules in enet cDAQ reading problem

    I have an enet cDAQ 9188 with 8 modules, including two 9213 modules CT and two 9215 ana in modules, reading a tc and an ana in each of the two screws. try different combinations of the order processed in the vis, all three modules will read ok, but not the fourth.  Anyone has any ideas or experience read several modules at the same time with different screws in a cDAQ enet?

    I now have a solution.  Instead of a task read each module separately, read all the modules entry with the same task.  Prevent resource reserved error.

  • Problem with an application of text analysis

    Hello

    I am a beginner in labview and I have some problems with my application.

    I have the front of my VI, an area of input text and two arrays of strings: one that contains a few words I have to say if they can be found in the text.

    And the other table contains the results of research: found or not found

    I did my version of the block diagram (I have attached to it), but I noticed that it only works only the first time I run the VI, subsequently, it displays the same results despite the entry of text or words. I find the my table has continued to add new entries every time that my for loop runs so I try to reset the table with constant strings at the beginning, but I guess that I did not it properly because I have the same problem.

    And I also have another problem: my array of words has its size = 7 and if I fill it with fewer words it's size, empty boxes in the results table appear as noted.

    Can anyone gve me a suggestion?

    The first attached VI is my original request where I found the problems described and the second contains what I have tried to correct

    Autoindexing if your friend here (and MUCH simpler because of things).

    Also know that "offset after match" will be-1 if the word was not found.  So you can just do a simple check for the number being greater than or equal to 0 see if it has been found.

  • I have problems with JavaFX applications run on raspberry pi!

    I have problems with JavaFX applications run on raspberry pi. I did all the steps of the course videos: overclocking, without comment that I had to uncomment on the framebuffer, but Exceptions are always produce. Demonstration of fireworks as an example does not work. Someone went through this problem? Java applications are ok. Like the versions of java in netbeans project and also on 'Properties' and they are all JDK 8. So if anyone can give a clue, I am very grateful!

    Can you provide the exceptions that you got so I can help you better?

    You want to make a coaching for this session?

    Vinicius-

  • I try to connect to the creative cloud on my MacBook Desktop App and sees only a spinning wheel where the application must be open. On a related note, I'm signing CC because I thought that my Lightroom Develop module is disabled. Clues?

    I try to connect to the creative cloud on my MacBook Desktop App and sees only a spinning wheel where the application must be open. On a related note, I'm signing CC because I thought that my Lightroom Develop module is disabled. Clues?

    Mac https://forums.adobe.com/message/5470608 spinning wheel

  • In order to download Itunes I need application Apple support. Where can I download it?

    I tried to download Itunes and get an error message saying: I need application Apple support.  Where I can down load this?

    This may help you - complements of turingtest2:

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review the other boxes and the list of documents to support more far down page in case one of them applies.

    Your library must be affected by these measures but there are backup and restore advice elsewhere in the tip of the user.

    Install the missing components a tips section break the iTunes installer in the .msi files individual which could be useful if ASA does move normally.

  • Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

    Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.

    Hi Sailortdt,

    Welcome to Microsoft Community where you can find the answers related to Windows.

    According to the description, it looks like you are facing a problem with network connectivity.

    It would be awesome if you could answers to these questions in order to help you further.

    1. have you made changes on the computer before this problem?

    2. you receive an error message or error code?

    I suggest you to see the steps in the following Microsoft article and check if it helps.

    Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • How to call a method of the Module of the Application of a class of ViewObjectImpl?

    Howdy,

    With the help of Studio Edition Version 11.1.1.3.0.

    I have a setup where a user between an element and a price. When the item and the price is committed, I want this event to then influence the price of his parents. My idea is to do a ViewRowImpl class and then call an AppModuleImpl class that is her parents and it affects their attributes.

    Question:

    (1) how to call a method on the Module of the Application of a class of ViewObjectImpl?
      public void setPrice(Number value)
      {
        setAttributeInternal(PRICE, value);
        
        DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
        BindingContext bctx = bindings.getBindingContext();
        DCDataControl control = bctx.findDataControl("AppModuleDataControl");
        ApplicationModule am = (ApplicationModule ) control.getDataProvider();
        //uh now what??
        // am.getProperty("method call(getTipsNum())") ?
      }
    (2) when I set an attribute on a view through the AppModuleImpl object, I'll make an infinite loop in this way? that is the AppModuleImpl calls the ViewRowImpl class on a setAttribue (< name >, < value >)?

    Thank you guys.

    It's an interesting problem, I'll take a stab to solve here.

    First let's see I understand the data model:

    (a) there is a table called BOM with a self referencing FK creating a hierarchy of data
    (b) each record BOM is usually a child to another record BOM, so using your example, a van is composed of frames and tires - Let's say that this amounts to 3 records in the Schedule table.
    (c) check parent, truck, is the root of the hierarchy, and so the FK relationship sucks.
    (d) the price of a truck consists of its children. So if the frame costs $1,000 and tires $500, the pickup truck costs total $1,500.
    (e) a change in the price of any folder BOM, upwards or downwards must be propagated to its parent folder BOM. As an example, if the tires up to $600, the pickup truck is now $1600 ($1000 frame + tires $600).

    Does this sound right?

    Well, that I understand the data model, here's what I'd do build in what concerns objects ADF BC:

    (1) an entity BOM (EO) object - let's call this Bom
    (2) a BOM BOM EO association (representing the self referencing FK)-Let's call it BomBomFkAssoc
    (3) an object to view BOM (VO) based on the EO - let's call it BomView
    (4) BOM VO view link BOM VO based on EO of #2 association - call BomBomFkLink

    Next, we create the Java constructs:

    (5) #1 ensures that the EntityImpl has been created
    (6) #4 guarantees for the EO association that it generates the required Java accessors

    Now the additional code:

    (7) for the EntityImpl # 5, in the field of setter setPrice() something like the following:

    public Number setPrice(Number value) {
      Number diffPrice = value.minus(getPrice()); 
    
      setAttributeInternal(PRICE, value);
    
      BomImpl parentBom = getBom(); // from step #6, the EntityImpl should have an accessor method to it's parent BomImpl record
      Number parentDiffPrice = parentBom.getPrice().add(diffPrice);
      parentBom.setPrice(parentDiffPrice);
    }
    

    From a point of view JSF, now when I change a specific record of the Nomenclature in an edit form, a change for the price of registration for the Bill to submit time will automatically propagated to the top of the hierarchy of the BOM because the method setPrice() of the current OS of BOM will walk to the top of the hierarchy of the BOM to the parent following the call it is setPrice() method , which will be then walk to the next BOM record and so forth. At the time all BOM records with changes should be committed to the database.

    You don't need to test this in JSF, but simply the browser component of company on the Application template project Module.

    .... Of course... If I misunderstood your data model, it will be of no help whatsoever.

    CM.

Maybe you are looking for