Problems running the check disk and disk defragmentation

Similar Questions

• Unable to run the check disk due to having to restore the system

  When you start the system, it shows that disk needs the consistency check, but then it shows that the drive can be controlled due to the recent installation so system restore first. Although, when you try to restore the system, it is said there are disk errors that should check and may need repair in which it said restart your computer for this. When the computer is retsarted, it shows that the drive needs verification but still, says system needs to restore. So I can't run a check disk or restore the system. Help, please!

  Hi mustakimahmed,

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you are not able to start from desktop due to errors in the disk check and not able to perform the system restore too.

  Try these methods and check:

  Method 1: Run the check disk in windows recovery (winre) mode. Follow these steps:

  (a) open command prompt.

  (b) use the following procedures:

  To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed: cannot run Chkdsk because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 2:

  If method 1 fails, because you are not able to perform the disk, or restoring the system check, you may need to contact the manufacturer of the hard drive to get help. As the drive that you are using may be corrupted.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• After you run the XP Disk Defragmenter, system crashes or runs very slowly

  When I run Disk Defragmenter after its finished to start my computer hangs up and slow real execution.

  Also, some installed start programs acting weird. like taking a lot of time to load up or when I use them that they cling

  or stop responding all together.

  To work the way they are supposed to do, I have to uninstall and then reinstall. Why is this happening?

  I thought that the operation of Disk Defragmenter only deleted of fragmented files that are no longer in use, or not is more necessary.

  So nobody knows what is happening here?

  Thank you.

  Kittycast of Kittyville http://justin.tv/marksr

  I agree with Gerry Cornel, this stemmed not Disk Defragmenter.

  There is nothing wrong with the Disk Defragmenter - it works well for what it was intended: temporary, occasional use. If anything, it gets abused and forced to do jobs he was supposed to never do, like defragmentation huge disks that get heavy use and therefore are strongly defragmented, etc..

  Here is a routine that I've compiled over the years to troubleshoot issues with Disk Defragmenter that proved very useful if you want to continue with this problem:

  There are several reasons why the built-in Defragmenter may not work correctly:

  0. it is malware on the system. Solution: Run an anti-virus control and also a spyware check.

  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  2. the disc is damaged and must be repaired. Solution:

  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  3. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:

  a. start - all programs - Accessories - System Tools - System Restore (click here to open);
  b. Select a good restore point before you start having problems with Disk Defragmenter.
  c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").

  4. There are other programs that run the Defragmenter interruption integrated. Solution:
  a. close all running programs.
  b. If you think there may be some programs that run in the background.
  c. press Ctrl + Alt + Delete and
  d. Select "start Task Manager".
  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  5. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  6. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.

  7 Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in Defragmenter:

  A:
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.

  8. most of the problems will be solved by #6 above, but if not, and if your windows installation is otherwise working well, you should consider to download a free trial of a Defrag tool commercial rather than drastic measures to restore the functionality built-s. Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.

  Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...

  Here's a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:

  http://Disk-Defragmenter-software-review.TopTenReviews.com/

  The gold medal is the only defrag program that also prevents the fragmentation (see comment).

  Why is it good to prevent fragmentation?

  Basically, it significantly increases life expectancy of your hard drive (especially since you don't have to leave the system on all night - a much 'greener' agricultural practice), not to mention it also increases the performance of the system.

  Find out what the review has to say on this.

  Good luck to you!

  Bill R TechSpec

  PS: If still no go, repair may involve editing the registry or repair installation of windows and possibly re - install windows itself. These aren't simple solutions. If so, indicate if they can be provided.

• Computer runs continuously check disk and automatically goes into power saving mode.

  2 days ago my computer was working fine, then yesterday he wanted to run the check disk at startup upward. Finished, he found no errors and proceeded to vista loading which then stated that he was going to power saving mode, the screen went black and clear screen turned yellow. Now he wants to run the check disk on every restart and ends with her past in power saving mode. I've only got 1 successful start since this all started. I tried to start in safe mode but it freezes. I also tried to boot to the last known configuration but that only prompted an another disk check and ended just as vain as other attempts. The hard drive is only a year so it should not be failing already. I don't know what I should try. Any help would be greatly appreciated. Thank you!

  Hello

  1. have you made changes on the computer recently?

  2. What is the brand and model of the computer?

  Method 1.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

  The correct way to disable CHKDSK to start use the on command chkntfs /x switch in command prompt. The /x switch will exclude a verification by default startup car. If you have drive C: as your hard drive, then the command to disable chkdsk C: drive analysis would be:

  chkntfs /x c:

  If you have 2 drives C and D, you can disable chkdsk with the command below

  chkntfs /x c: d:

  So go ahead and restart.

   

  Method 2. 

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Here are the steps to disable checkdisk at startup.

  1 - click on the 'Start' menu of Windows on the desktop and click on "Search" (Windows Vista or 7).

  2. Type "regedit" in the search box and press 'Enter' to start recording.

  3 - Click on '+' in the folder 'HKEY_LOCAL_MACHINE' to develop. Click on the 'SYSTEM' folder and click on the folder "CurrentControlSet". Click on the 'Control' folder and then click on the "Session Manager" folder.

  4 double click on 'BootExecute' on the right pane. You should see the default value of the key defined as autocheck autochk * (with asterisk). The asterisk (*) means that the Windows controls every drive for consistency. Add "/ K:C" at the end of the autocheck autochk * after the addition, the final value should look like this: autocheck autochk / k: C *.

  5 - Click on "file" and click "Exit" to close the damper. Restart your computer. The disk check is no longer lance to the computer startup.

  Method 3.

  After the checkdisk has been disabled, I suggest you to reset the power to the control panel settings and check if that helps.

  Solve power problems: http://Windows.Microsoft.com/en-za/Windows-Vista/troubleshoot-power-problems

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-us/windows-vista/Change-create-or-delete-a-power-plan-scheme

  I hope this helps.

• When I try to use automatic dates, I get code 8007005. I ran the check disk and there is no problem here.

  When I try to use automatic dates, I get code 8007005. I ran the check disk and there is no problem here.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• try to get the Boot Disk Defragmenter.

  I begin of choice of tools system Disc Defrag regularly or to administer mode get User Account Control nothings happens.  I tried my right click computer properties, tools, defragment and once again nothing. Family Vista premium, all updates are current and all drivers are up to date. There is a new recall defrag was working fine before the update of windows. Updated driver occurred after problems to start defragmentation.

  Windows disk defragmentation must be performed by calendar. You shouldn't have to run it manually, not to mention that it takes forever to complete if you run manually.
  Once fixed, the Windows Disk Defragmenter is designed to run silently in full. You won't see her progress.
  Here is a tutorial to show how your disk defrag schedule.
  http://www.howtogeek.com/HOWTO/Windows-Vista/configure-disk-defragmenter-schedule-in-Windows-Vista/

  If you're dead set to run manually and monitor progress, I recommend Augslogics.
  It allows you to decide which drive to defragment.
  It shows you the process, "play by play".
  It gives you a summary report.
  Augslogics link:
  http://download.CNET.com/Auslogics-Disk-Defrag/3000-2094_4-10567503.html For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  You can check with the manufacturer of the camera, whoever it is.

  You can also remove the memory card and put it in a card reader that plugs into a USB port.  If you do not, you can buy them for about $3 in computer stores.

  Good luck.

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• TypeError: try to run the script compilation and go on a 'mistake' in scope cleared when message returns the transfer through images for each image. Does not affect viewing.

  TypeError: try to run the script compilation and go on a contour

  Above the error message appears when moving between images - back and forth. By clicking on the OK button removes the error message and there is no apparent problem. The window that appears refers to a JAVA Script Application (I guess that FIREFOX is the application?)

  -> Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Check and tell if its working.

• I try to run the security essentials and it tells me that I'm missing msvcp90.dll

  I try to run the security essentials, and he tells me that I'm missing msvcp90.dll. Same problem occurring with a real player has not re - install. How can I recover file?

  Hi BradleyMitchell,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what version of Real player installed on the computer?

  Msvcp90.dll error can be caused if the Visual C++ Library Runtime components are missing or corrupt on the computer.

  Method 1

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2

  If the previous step fails, then install the Package redistributable Microsoft Visual C++ 2008 and check if it helps.

  Microsoft Visual C++ 2008 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  You can also post your request in the Microsoft security essentials forums using the link below.

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start

• Lets run the multilingual method and input of blackBerry Smartphones

  I've updated the 7.1 os and it took me to multilingual method and input. I had once managed a whole upward. in any case, it seemed now missing on the phone, and on the desktop PC does not show language. I did remove the OSI and reinstall, the the same problem. I want that it multilingual and other language input method. Any suggestion? Please take note.

  OK... that now makes sense... the automatic method detects your BB and the level of operating system installed, but is not able to download correctly what it needs from the Internet to continue. And the Red Star means that there is an update, he wants to offer you, but again he has trouble to download what suits him.

  So, what you need to do is to defeat the automatic method and force instead of things. The easiest way is, on a PC (you can not do on MAC):

  1) uninstall all the BB OS packages from your PC,

  (2) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/apps-software/desktop/?lid=us:BBsoftwareesktopSoftware & Cal = us: bbsoftware

  (3) download and install to your PC, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If you want to just reload your current version, you can access your carriers download portal and get the same exact package you are already running
  • • KB23393 How to check the model number and the version of the BlackBerry device software on a BlackBerry smartphone
  • But if you want to go for an update, you can see what your company has, or you can dig into all of the companies that support your specific model BB number and compare versions of each provision.
  • Also consider this information as you choose your BB OS package:
  • • KB05305 Location of support for BlackBerry smartphones

  4) remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (5) run the Desktop software and connect your BB

  If you chose to update your BB OS, then the software should immediately offer the bundle of BONES that you have installed on your PC, before you can do anything else. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  If you have chosen your BB exact same OS package that is already running on your BB, then you should be able to proceed with the installation language you want (assuming, based on the location of KB, you have installed the right BB OS package that includes the language of your choice).

  Do not forget to save.

  Good luck and let us know!

• problem running the software after installation

  I installed age of empires 2 on my laptop and when I tried to run, the aoe2 loading screen would come and then close after 50sec. I don't know what the problem is. I need help

  Hello

  1 - is your computer meets the requirements of the game?

  2. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps outlined in the following link from Microsoft to solve the problems of the game performance and check.

  The problems of the game performance:

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

  Method 2:

  Put the computer in a clean boot state, and then try to play the game and see if the problem still occurs. Using the boot, you can determine which third party game or an application is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Hope the information is useful.

• problem running the session of remote debugging for specific oracle sql developer

  I have a problem running the session of remote debugging of sql server specific oracle developer.
  I get the following error:
  Connection to the database mmgrep - INNA.
  PL/SQL execution: ALTER SESSION SET PLSQL_DEBUG = TRUE
  Running PL/SQL: CALL the DBMS_DEBUG_JDWP. CONNECT_TCP ('inna.followap.com', '4029')
  ORA-30683: failure connecting to debugger
  ORA-12535: TNS:operation expired
  ORA-06512: at "SYS." DBMS_DEBUG_JDWP', line 68
  ORA-06512: at line 1
  Process is complete.
  
  
  I understand that Oracle is unable to connect to my PC.
  I have 2 different oracle servers to work with the sql developer. With one I can run debugger, with another - the errow above.
  I need to change to be able to start debugging with second oracle server.

  In tools | Preferences | ebugger, you can specify a range of ports for the debugger to use so you can limit it to those that are open on the firewall.

  And just to check, is the ip address that is displayed in the CONNECT_TCP call the right one for your PC?

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167