problems starting etc.

Similar Questions

• Windows Vista freezing, problems starting mode safe mode, Windows Update does not work, etc.

  Hi all. I am operating Windows Vista Home Premium Service Pack 1, 32-bit on an HP Pavilion dv6000.

  My problems started about two months ago, when I installed several updates through Windows Update. I started having problems with my USB ports (even if these pilots were not being updated) and the computer was never able to close successfully. I tried to uninstall these updates, but that did not fix the questions I had. I have also installed software (AutoCAD 2007) at the same time and uninstalled, nothing helps.

  Then my computer started to freeze after running for a few minutes. Time seems to vary from 5 minutes of good use for 1 hour, but I found that it works only because this so long, I only open a program or file and use it all the time (for example, reading a book in Adobe Acrobat format). If I try to open the program or additional files, go to control panel, etc. (read: if I do everything related to Windows Explorer) the computer crashes. I can still move my cursor but none of the windows meet, and I can't ctrl + alt + delete to enter the Task Manager (I get a black screen).

  I was manually shut down my computer every time that happens and boot in SafeMode several times. Sometimes when I try to start safe mode it is hampering the crcdisk file and turns off. It happens not every time, however. Sometimes, when it starts it running the disk check, and there has been some index files that it has been deleted and orphaned files that it has been moved.

  I tried to do a system restore to a point before the updates I've installed in October, but my computer has no points system, restore even if he says it was their creation before you install these updates.

  The last problem is that when I go to Windows Update, it says that I have never checked for or downloaded the updates in the 15 months that I've had the computer - is not true, I, he lost at the time of all the record of it. So although I would like to provide you with wonderful with a record of what I've updated and people uninstalled, I can't because all this information is gone. In addition, I can't connect to the internet to try to check the news updates, because our internet service runs a USB modem, which is not communicating properly with my computer.

  I hope someone has an idea of what's going on. I just can't understand the common point that all these questions arise, my technology skills are somewhat limited, so I hope for a relatively easy solution.

  Sarah

  BTW, all my files were backed up on external drives.

  I don't know Jack about computers, but I don't know that I went through almost exactly the same thing.  My pc was ok, then in a month or two, it took a nose dive.  something I did was too that much could not think of everything.  A friend told me to reset my bios to default settings and see what happens.  After having spent only 7 hours trying to teach myself on bios, I got stabbed in this area and it worked.  Everything is great runnng.  Now I can even right click on icons without crashing.

• Why am I getting this pop-up box stating: there was a problem starting C:\Program Files (x 86) \...etc?

  I get a popup box whenever I start my PC saying - there is a problem starting C:\Program Files(x86) \Conduit\CT3227976\plugins\TBVerifier.dll that the specified module could not be found.

  Then I click OK to remove it and to be able to continue.

  Please, what should I do to fix this?

  Thank you Mr. Ramesh Srinivasan.

  But I solved the problem with my ccleaner, I was able to disable the file using my ccleaner and it was very easy.

  Thanks again,

  Diana Allen

• Qosmio F60 - hibernation of freezing and problems starting

  Hello...

  The problems started when my computer goes into hibernation mode and when I press the power button to launch once again, it remains frozen.
  I then press the switch to turn on it works again.
  Option just to start normally or in safe mode.
  Either way comp freezes in the middle of loading and I must push the switch down to the Tower model

  Then the new restart msg saying there is a problem in the start menu and asks me if I want to solve the problem
  I click Yes and a number of things have happened several times:
  (1) computer sets and loads normally
  (2) computer says he can not solve the problem and continues to load correctly
  (3) the computer freezes in the middle of loading or during the process of setting
  (4) computer sets and restarts but crashes in the middle of reloading

  I often have to go through this time half a dozen before I can load normally

  either way my norton antivirus has been come with messages saying I need to reactivate (my subscription is not exhausted) or an error has occurred
  have done a full virus scan - none found

  is this a virus problem? I do a system restore? any other advice?
  help much appreciated

  Hi kkle4,

  You use the preinstalled version of Windows 7 in Toshiba? I can t find any information in your posting on OS :(

  Otherwise I agree with Akuma and you should check the BIOS version and probably an update would be useful. Before you begin to update of the BIOS here are some useful tips:
  -Close all running programs (also, antivirus, firewall, etc.)
  -Make sure that you are logged on as an administrator
  -Unzip all files from zip archive
  -Connect the AC adapter before you can update the BIOS and make sure the battery is fully charged

• Problem starting Equium L40

  Hello

  I use F1 to start my Equium L40 every time I tun turn it on. It will then start ok but he forgot the time and date, as soon as I update time / date, the computer works perfectly I can access all my email etc accounts without having to put anything.

  The problem started after the replacement of the battery because of that being almost completely dead. I noticed that the computer will not work on AC only without mounted battey but is still charging the battery ok. (if the adapter is ok)

  I love the computer and do not really want to buy a new, but it is very frustrating and tedious when I turn it on.

  Maybe there is a battery backup I can change to fix the problem?

  Any help would be appreciated?

  Hello

  Laptop should also work without battery but connected to the power adapter
  So I guess that your motherboard is affected in some way.

  If the RTC battery (bios) is empty, the time and date in the BIOS menu would be reset to the default value. But in my opinion, this shouldn't be a problem to use the laptop with AC adapter.

  However, the RTC battery can be charged to do that you need to connect the main battery and power adapter and the laptop must be turned on for a longer period of time (18-20 hours).

  Check it out!

• Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found.

  While from my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

  RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

  I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

  I tried then access these locked directories showing locked and have encountered the error

  C:\Users\ (X) 'X' is not accessible, access is denied.

  I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

  AND yet once I met the other mistake

  Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

  So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

  Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

  ........ Content of the lead in double...

  I already posted this Question under Security, issues of privacy and also accounts, but it seems that the error also happens with IE explore 11. The error comes back constantly, but more often in the browser.

  Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found. Well that begins my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

  RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

  I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

  I tried then access these locked directories showing locked and have encountered the error

  C:\Users\ (X) 'X' is not accessible, access is denied.

  I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

  AND yet once I met the other mistake

  Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

  So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

  Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

  Hi Barry,.

  Sorry for the late reply.

  The Internet Explorer cannot be uninstalled. However you can disable/enable what works as the resettlement.

  How to repair or reinstall Internet Explorer in Windows

  https://support.Microsoft.com/en-us/KB/318378?WA=wsignin1.0

  Keep us informed on the issue.

• There was a problem starting \AppData\Local\PLATYTO~1\Updater.dll C:\Users\ (snip). The specified module could not be found.

  RunDLL

  There was a problem starting

  \AppData\Local\PLATYTO~1\Updater.dll C:\Users\ (snip)

  The specified module could not be found.

  Original title: that means the attached error message, how will this affect my use of the computer, and how to fix it?  Thank you, C

  This arose before a few times.

  See if http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/keep-receiving-a-run-dll-error-for/f89fa5d1-fd0d-42b9-b72c-b47a38d57ed2 help.

  It can be useful also running a full anti-virus update. In addition, download install update and run a scan complete with free malwarebytes (keep it free, no need to trial etc.) as a check of the backup.

• SE error message: "Run"DLL"there is a problem starting. C:\Users/John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll

  Get the below error message every time I start my computer:

  Run DLLS
  There was a problem starting
  C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
  The specified module could not be found.

  Hello cuefox, thank you very much to judge me.
  We're here to help.
  Continue to browse the web with Firefox, thanks once more.

• Printing in 2 programs problem started 2 days ago, only firefox works fine with Internet Explorer?

  Services Bank web site has a "Print - Friendly View" text, on the top right of the page that displays the account information in a different format if you click on the text. Printing all other functions work ok. The problem isn't when you use them Internet Explorer. The other program is on the Aflacs website, and the problem is very similar. When I click on the text stating "Print copy of invoice", nothing happens, as the text of the Bank. Both work perfectly with Internet Explorer. The problem started about 2 days ago. When it works well, a window will open and show you what it will print and you click on the text "print", and it prints. Any help on this problem will be greatly appreciated.
  Thank you
  Joe Anderson

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  When in Safe Mode...

  • The State of plugins is not affected.
  • Custom preferences are not affected.
  • All extensions are disabled.
  • The default theme is used, without a character.
  • userChrome.css and userContent.css are ignored.
  • The layout of the default toolbar is used.
  • The JIT Javascript compiler is disabled.
  • Hardware acceleration is disabled.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

  My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• HP27-k350xt:. On each startup, I get this message. "There was a problem starting C:\Users\bulldog2u\AppData.

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  BULLDOG2U wrote:
  

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  You don't want in this file.  Ads by Call Builder is malware that opens the ads on your computer.  If you encounter this error, then it is likely that you have an antivirus/antimalware program which was removed from your computer, but left the startup item.  More information on Call Builder, and how to remove can be found here.

  To remove this item from your startup list, follow these steps:

  System (Windows 7) Configuration utility

  1. In the start search box, type MSCONFIG and press ENTER.
  2. Click the Startup tab.
  3. Uncheck the items you want to run at startup.
  4. When you have finished your selections, click OK.
  5. In the box that appears, click on restart to restart your computer.

• Re: Problem starting L300

  Hello. I'm having a problem starting my L300 - it works very well up until now and has suddenly developed this problem.

  When turned on it, - very slowly - boots for the logo toshiba with the message "F2 for the Setup utility, F12 for Boot Manager" standard, but does not spent there - if left for a while it's just back to the blank black screen, the cursor in the upper corner of flasher for turn a little and then out. F2 or F12 do anything.

  Anyone got any ideas, what could go wrong? :(

  Hello

  Sorry, if I do not understand you correctly. You have a message like, Manager of boot is damaged?

• HP all-in-one 4620: uninstalled 4620 printer but getting 'problem starting HPStatusBl.dll' notice at startup.

  I uninstalled the printer software HP 4620 on my HP computer running Windows 8.1. When you start the computer, I get the message "error loading c:\programfiles\hp\hpofficejet4620series\bin\hpstatusbl.dll" window message

  Hey @SteveJG,

  I would like to help you today to solve the 'problem starting HPStatusBL.dll' message that you get on your computer Windows 8.1. I understand that the uninstall your HP Officejet 4620 e-all-in-one printer has not made a difference. Just so you know, this error message is for a 'service' that Windows is trying to start it's related to the HP device. I just go and delete this file manually. Please follow the steps below.

  1. Open the Start screen by selecting the Windows button in the bottom left of your computer screen, or by clicking the Windows button in the bottom left of the keyboard, to the right of the Ctrl key.
  2. When the splash screen opens, type computer (can show that This PC)
  3. Click on the computer (or PC) to start the window
  4. When the computer window opens, click on the Drive C
  5. Click on users
  6. Click on your user name
  7. Select AppData
  8. Select roaming
  9. Select Microsoft
  10. Select Windows
  11. Select the Start Menu
  12. Select programs
  13. Finally, click Start
  14. You will see a shortcut here to monitor alerts - ink HP xxxxx. Right click on this and 'Remove' it.

  Once the file monitor ink Alters has been removed, restart your computer to verify that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Lenovo X 230, CustomEventMonitor.dll 'there is a problem starting'

  Dear Sirs,

  Just after the connection of Win10, I begin to get this error message. How to solve this problem?

  'There is a problem starting'

  and right under "is not a valid Win32 application".

  Here's what it looks like - error

  The answers will go,

  Thank you