Problems starting Vista Service pack 1 update - buckle boot - now

Similar Questions

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

• Having problems installing Vista Service Pack 1, says that it is installed but not shown in the installed updates

  Problem of re - install windows service pack 1 KB936330.

  I had to format the hard drive and reload the operating system.  Windows stopped to Service Pack 1.

  I have a Windows Update if it is available for updates.

  When I click on it, updating starts, then gives me the window on the acceptance of the agreement, then a window that could take up to an hour and will restart so save the job.  When I click the grateful this last window, the update screen comes back and says that it has been installed.

  But I can not find the Service Pack 1 or KB936330 on the list of updates installed on Control Panel / programs and features / installed updates window.

  Help.  I can't update to IE 7 because the Service Pack 1 and Service Pack 2 are not installed on my system.

  Thank you

  Mike

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Both articles contain instructions on how to manually install service packs.

• Vista Service Pack 1 update fails - computer will not start and cannot be repaired

  The computer which is an Acer desktop computer, running Windows Vista Premium.  In the last 6 months updated Vista tried Service Pack 1 update to install Vista about 8 times and failed every time a reason any.  Just before this latest incident, a facility was "cancelled" in the Middle for some reason any.  I restarted the computer and almost immediately was advised that there is an update, which turned out be SP-1.

  I started the update, and some time later I received a message that the update was successful, and that he had to be restarted the computer.  I clicked on the button restart and the Installation continues during the shutdown.

  When the computer tried to restart initialization failed and I ended up after several lines of information that looked as if it might be checking drivers and then information began to look as if she might be reading the register lines.  Each line has 2 numbers separated by a slash (/), who scored on a single line at the top of the screen, (white letters on black background) after a certain time the count to stop with the line of text of flickering on the same entry.

  It is the line that goes to the screen when the information keeps changing.

  !! 0xc01a001d!  37636/92292 (\Registry\Machine\components\winners\x86...)

  Since the failure of the Windows Vista SP1 update, when the system begins to start, after a short while, he starts playing what seems like lines in the registry, and after a few moments he always stops with the same accurate information just flicker.  At this point, it seems that this scenario will continue forever.  The hard drive is accessible, as if trying to read something, over and above.  The hard drive light flashes, instead of being on regularly, but only for a while.  After that, even the flickering stops.

  I have tried to start mode without failure, then after loading some files and after some time (5 or 10 seconds) the displayed files always end with the same file at the bottom of the list and what seems to be a status extend the message please know...  Shortly after the screen is empty, the fails to start and the computer is restarted.

  Usually what will happen is that the computer will begin to start up again, but because the previous boot failed, it asks if you want to go to startup repair, which, at first, seems to work fine, but after a little time it brings up a dialog box asking if you want to restore to the previous good Restore Point.  The display will then return to the same routine he had previously, and she runs to always if not interrupted.

  If you click the Cancel button, a message appears indicating that you cannot interrupt the current process, so the only way that you can try something else is to Shut Off the Power in now the switch down, permanently.

  [Note: the notes above have not all accurate messages, Word for Word, exceot for the Hex error line.]

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Try to put the folder windows update catalog distribution and software
  Try the following steps:
  1. Insert the Windows Vista installation disk into the disk drive and restart the computer.
  2. When you are prompted to restart from the disc, press any key.
  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.
  4. on the page to install Windows, click on repair your computer.
  5. on the System Recovery Options, click the version of the Windows Vista operating system that you want to repair, and then click Next
  6. in the System Recovery Options page, click command prompt.
  7. type cd C:\windows\winsxs, and then press ENTER.
  8 type ren pending.xml pending.old, and then press ENTER.
  9. in the registry editor, find and delete the following registry subkey:
  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HKLM\Offline Components\PendingXmlIdentifier
  HKLM\Offline Components\NextQueueEntryIndex
  10. at the command prompt, type exit to quit the registry editor. Press ENTER.
  11. click on restart
   
  More information:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista: http://support.microsoft.com/kb/949358
   
  Hope this helps
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer

  
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem installing Vista Service Pack 1

  Hello

  I searched the internet for hours now and have found many people with the same problem but I couldn't find a solution.

  I just bought software that requires Vista service pack 1 which I thought that I had already but I didn't so I installed it.
  It goes through the whole process of installation and the last section after restarting, it goes to a black screen where it moves well as files or something but locks files 37898/94821 with the message:! 0xc01a001d! (\Registry\Machine\COMPONENETS\winners\x86...).

  If anyone has had this problem and know what to do.
  My laptop is fine without service pack 1, but my new software needs to work so I have to download it.

  Thank you

  Hello

  To be honest, I never had any problem with my Vista updates
  The Vista updates automatically every time when I m online and when new updates are available

  How have you tried to update the Vista operating system?
  Have you downloaded the SP1 version first on the HARD drive or do you run an automatic update?

  If the automatic update does not work, try to download the SP1 version first, and then start the update procedure:

  SP1 can be downloaded here:
  http://www.Microsoft.com/Windows/downloads/default.aspx

• Windows Vista Service Pack 2 update (KB9448465) Failure Code 80200013

  I tried several times to install this update. Whenever I get up to 45%, and it stops telling me he could not install and gives the error code 80200013. Help, please.

  Proposed response:

  Hello Chavumaboy,

  I hope you do well. Chavumaboy, to solve this problem, try to perform a clean boot and then install a standalone package for Windows Vista Service Pack 2

  > Minimum will disable all third party services. It allows to eliminate software conflicts. Please follow the steps below to perform a clean boot:
     
  -Connect to the computer by using an account that has administrator rights.
  -Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration
  Utility.
  -If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  -On the general tab, click Selective startup, and then clear the check box load startup items.
  -On the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  -Click OK and then click on restart.

  > See the link below to download and install the stand-alone package for the Service Pack 2 for Windows Vista:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Please go through the link below for more details:

  http://support.Microsoft.com/kb/947366

  I hope this helps.

  Thank you.

• Windows Vista Service Pack 1 update repeatedly invites you to install

  original title: I recently had to do a clean reinstall of vista. Now SP1 installs successfully, but when a newspaper the next day it's still need to be installed. This happened 9 times now.

  I recently had to do a clean reinstall of vista. Now SP1 installs successfully, but when a newspaper the next day it's still need to be installed. This happened 9 times now.

  Hello

  To know if SP1 is already installed

  • Click the Start button, right-click computer, and then click Properties.

  If Service Pack 1 is listed in the Windows edition section, SP1 is already installed on your computer and you do not need to follow the instructions below.

  If it is not installed, you can view the following items.

  Method 1:

  I also read the article and follow the steps mentioned by Jared M. has answered the.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Vista-Service-Pack-1-KB936330-fails-to/dba7bf87-665a-434c-aec0-a14028a19334

  Method 2: Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-XM/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Method 3: How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Warning of Virus Scan: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

• Windows Vista Service Pack 2 updates

  I want windows to automatically download updates. I have my pc set to automatically download updates every day at 01:00. However, when I turn on my pc at about 09:00, he lets know me there are updates, but it will not install automatically. I install manually. As soon as I install manually, I get another notfication within 30 seconds, advising there is of new updates. Is there a way that my pc will automatically install updates without having to manually install every 30 seconds I? The update is called Windows vista service pack 2. If I continue to update when it warns me, there is no end to the amount of updates that 1 day ago. This can be corrected?

  sbird,

  see the following topics

  (1) read this firsthttp://windows.microsoft.com/en-us/windows7/Understanding-Windows-automatic-updating

  then apply the following

  (2) the same applies to vista / read and implementhttp://windows.microsoft.com/en-US/windows7/Change-how-Windows-installs-or-notifies-you-about-updates

  free unlimited installation and compatibility support is available for the windows vista SP2 until August 30, 2010 issues.

  availability of support chat or messaging differs depending on your location.

  some questions may require that more support for which he is advanced a charge.

  go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 and select the appropriate category (i.e., download problem; installation problem problems after installing a service pack).

• Persistent unsuccessful Windows Vista Service Pack 2 update. Help!

  Hello! My computer says that I have an important update-Windows Vista Service Pack 2 for x 64 systems. I get through the process to accept the license agreement and it starts the update. However, it ends and indicates ERROR update failed. Code 80070026-26. Any suggestions as to what I can do to have a successful update?

  Hi alm1219,

  1. do you have security software installed on the computer?

  2 are you able to install some other updates on the computer?

  3. did you of recent changes on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

• I installed Vista Service Pack 2 update...

  I installed an update to Vista Service Pack 2 and at the bottom right of my screen, it says Windows Vista (TM) evaluation copy. Build 6002.  My copy of windows Vista came with my RESUME!  Now when I turn on my computer it says my evaluation copy is on ot expires in 9 days! HELP to

  I have a sticker # PID on the side of my HP that has an OEM in it which means it came with the machine, I bought... I am very scared that I lose access to my company.

  Hello

  you have a Pre-release Version (beta, RC ) of the SP2 installad. Open Control Panel and select programs-> installed updates and uninstall Sp2. After uninstalling Sp2, elast 1 hour wait and download the Final Sp2 and install this version.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• No audio device installed after windows vista service pack 1 update!

  After you install windows vista service pack 1 I have no sound on my laptop.what do? I have a message that no audio device has been installed.

  Hello

  You can follow below link that can help you to solve your problem:

  How to resolve problems that you experience after you install a Service Pack in Windows Vista.
  http://support.Microsoft.com/kb/948481

• Problem with Vista Service pack 2

  Like a fool, I downloaded and installed this service pack.  Now my computer restarts.  I spent 12 hours with the technicians MSFT trying to solve the problem, and I still have the problem.  MSFT says the problem with my DELL hard drive.  DELL said that the hard drive is fine.

  I even reinstalled windows - take 3 hours - and I still have the same problem.  I tried to start in safe mode but after loading the files a few dozens, my computer crashes.   I can't to windows to open.  I can't go to my office.  I can't remove this insidious update.

  I can't completely clean the computer I have important files that I'm going to lose.  MSFT and DELL say I need to have a tech shop and have them remove the disc and save my files.  I want to know who will pay for what is not my fault.

  Help, please

  Hello

  One of the easiest ways to remove your data is put the drive in an external USB enclosure and
  Copy the files to a different drive or just use this as an external drive and install a new in your
  computer. Don't forget that looks like the system has problems and I bet it's the hard drive
  drive interface controller card mother.

  Another real possibilities, is that you have a Rootkit that is causing the problem.

  Good luck.

  Rob - bicycle - Mark Twain said it is good.

• Vista Service Pack 1 update - not sure if really put up-to-date

  I had my office hard drive replaced.  I use MS vista and the need to update the service packs again etc.

  However, I thought that I had downloaded and installed SP1 as it appeared in updates.  Since then, I got a message in windows update to install SP1, so I clicked on that once again to be informed in the few minutes he had been installed successfully.  SP1 does not appear (if is should) when I go to the properties of the computer and see details of OS etc. just does not show Vista Home Premium no ref to SP1 and any message to say to activate windows so not puzzled as to why he doesn't seem to be updated even if it appears in the history of the update January 3, 13.   Please suggest solutions for a layman.

  Hello

  Thanks for the display of the query to the Microsoft community. I'll help you get the problem solved.

  You can follow the steps in the article and check if it helps. Run the FIXIT and check. If the problem persists, follow the other steps listed in the article itself.

  You can also run System File Checker and check if it helps. You will need to have your drive Windows recovery on hand in case there are corrupt or missing files. SFC will ask you the disc in order to replace these files.

  If the problem persists, you will need to run the System Update tool.

  Note: update of the tool system can take a long time to run. You must wait until the process is complete.

  Be sure to re-enable or reinstall the antivirus ( softwareSecurity ) after completing the troubleshooting steps, because the computer can be at risk of infection by the virus.

  You must download and install the stand-alone version of the Service Pack 1.

  Hope this information was helpful and we provide more information if you need help. We will be happy to help you.

• Cannot install Windows Vista Service Pack 1 update

  I just bought Windows 7 because of all the problems I have with Vista. I did the update Advisor and he told me that I had to update my windows vista with service pack before I can upgrade to Windows 7. When I tried to install, it says update failed. The number, he gives me is KB936330. Can someone help me with this? Thank you. I had many problems in the past trying to install updates also.

  You post your question in the wrong Forum.

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem installing Vista Service Pack 2

  Hello, I keep trying to install the Vista SP2 and it keeps telling me that an item is found.

  I have Error:ERROR_NOT_FOUND(0x80070490)

  It's confusing to me. I tried the download of the previous service pack that says that I already have.
  I tried to restart the computer before turning off all firewalls
  I tried the download of the installer a ready source.

  I am really frustrated

  Can anyone help?

  Iain

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vista
  http://support.Microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services