problems tab

I refreshed Firefox (mistake)
Make a right click on the mouse will not always open in a new tab or a new window
What should do?

Make a right click of the mouse gives me much too many options - more than the half-dozen or so that I had before - how can I shorten the list?

Seizure of a research question and pressing on enter does nothing.
Enter a question to search on the top bar does not open

What should do?

Hi, this is probably because something on your system has crushed all providers default search in firefox. to recover it please download and reinstall firefox to on top of your existing version.

Since it is a behavior often caused by adware on a system, please also run a scan complete of your different system with security tools like the free version of malwarebytes and adwcleaner.

Fix Firefox problems caused by malicious software

Tags: Firefox

Similar Questions

  • Problem 'tab' Safari in El Capitan

    Today I upgraded to El Capitan.  When I open several web pages in safari, the tab is empty - it does not list who's who.  Does anyone know how to solve this problem, so I can see the site in the tab?

    Please read this message before doing anything.

    This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

    Step 1

    The goal of this step is to determine if the problem is localized to your user account.

    Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

    While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

    Test while signed in as a guest. Same problem?

    After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

    * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

    Step 2

    The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Please take this step regardless of the results of step 1.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

  • Problems tab layout form/Leader TOC (table of contents)


    I found it impossible to the TOC format with Chief tabs as I've seen the procedure described in the many forum posts, books and elswehere. I am an intermediate user of FrameMaker 9 FM running on Windows XP Pro. I run the same setup on a House and office with the same problem machine.

    I am in the process of migration of large volumes of documentation of our company LaTek to FM and this issue proves to be insurmountable. I need to have complete control over this process, instead of "make do" with the default TOC.

    I spent three days studying the nuances of the issue, which usually leads me to some insight or model that allows me to solve the problem, or at least share some clues on the forums. However, in this case, FM either does not work like its supposed to, or it implements my changes of apparently arbitrarily. So I don't know if it's a bug or a user error. I have also experienced the occasional crash of FM during all this work, often it is preceded by the designer of paragraph gel window and refusing to change your mind within the window (basic, by default, etc.).


    Specifically, I have learned to manage the General formatting with the blocks of construction on the page "reference", but the Chief tabs I use for the page numbers almost never spread, unless I use the TOC example included with FM.

    I am sure that they are properly formatted, I even copied examples directly from files that I know (example FM files) work.

    When I manually implement the process, I insert the tab between the blocks of construction (without space), define a RAS right tab, double click on and choose tab Manager option. Then I go to view 'page of body', save the document and regenerate the table of contents. Generally, nothing happens. Occasionally, after regeneration several times or by creating a table of contents fresh, some of the changes magically spread.

    I even tried to import the format of another table of contents, which doesn't seem to work randomly. Especially not.

    Any help is appreciated.

    Thank you


    You have set your tab outside the text frame (x6.25 ""). The maximum setting is only 4,625 ". The tab stops are within the context of the text block, not by the value of the leaders on the top.

  • New problems tab

    V. 21.0
    I have disabled the "New Tab Page" function because I want the whole story, I want to just as my home page. How can I get each NEW TAB to show only my home page?

    Here is how you can reset what is the tab. If this setting does not stick, one of your modules could be replacing it.

    (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

    (2) in the filter box, type or paste newtab and make a pause so that the list is filtered

    (3) double-click the preference browser.newtab.url and enter the desired value:

    (i) (default) Page thumbnails


    (ii) Virgin tab


    (iii) integrated Firefox home page


    (iv) any other page

    full URL to the page

    Press Ctrl + t to open a new tab and check that it worked. Fixed?

  • Internal HP slate 7 voice - storage problem tab

    As we know user available device memory may be less than memory declared because of the default pre-installed applications and OS device, I got 12.41 GB for use out of 16 GB. But when I checked, I found the following:

    It clearly shows the Total space is 12.41 GB and I use 4.73 GB (apprx)... so how fix it availabe is 4.63 GB!

    It takes 7.68 GB(apprx). Then I have a 3.05 GB memory ghost.

    so please help me out & solve the prob...

    Thank U...

    Hey @SjKundu ,

    Welcome to the HP Forums!

    I understand that your 7 slate voice Tab does not correctly reflect the available storage space.

    Please, try the following.

    Hard reset: When the Tablet is activated, press and hold the power button for 8 + seconds force to stop. Turn on the Tablet and see if that helps.

    Factory reset: Make sure that you back up important files or information, first of all. Settings > Backup & reset > reset data.

    If none of these allow to reflect correctly the internal memory could them be corrupted storage space. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

    Thank you.

  • I can't make new tabs!

    Yesterday, I've updated to the latest version of Firefox. My computer is updated and I work with OSX 10.9.3. Since the update and restart, I can make more tabs in firefox. I tried ctrl + T, by clicking on the sign more and manually add a tab in the menu. The only way I can open multiple websites is by opening new individual windows.

    I went through my extensions and modules, and I do not have the "Ask Toolbar" that has been associated with some problems tab a few years ago. I've uninstalled and reinstalled Firefox without result.

    I really don't want to give up firefox, but I really need to be able to use tabs.
    Any help would be appreciated!


    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    For Firefox versions prior to 29,0:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the "Reset Firefox" line


    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    For Firefox 29,0 and above:

    1. Click the menu button

      click Help

      and select troubleshooting information.

    Now, should open a new tab containing your troubleshooting information.

    1. At the top right of the page, you should see a button that says "Reset Firefox"

      . Click on it.

    2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    3. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • Starting this weekend when I opened a new tab, I can only type a few letters before my cursor jumps far and I have to set on the address bar to continue typing - what can I do to fix this?

    This weekend I started having problems tab that had never happened before. When I open a new tab, I don't have time to type one or two letters before the cursor jumps away. I did a scan of symantec without success. Someone at - it suggestions on how to solve this problem of jumping? Thank you

    This has happened

    Each time Firefox opened

    Is this weekend

    Me once again. It is the complement of CoolPreviews, not Firefox.

    Since the return of FF 3.6.4 or 3.6.3 does not resolve the issue, I searched further and found the culprit.

    After you disable CoolPreviews 3.1.0623, the question came to me.

  • Two tabs of the same page

    I have spent all morning trying to find a solution to this problem, but have not found by myself or the analysis of forum posts.

    I am building an application with a level tab two for navigation.
    It's all right as long as the pages referenced by the tabs contain a different number.

    My problem is that I use the same page dynamic (say 40) to be used via two different tabs.
    for example Parent tab is labeled "Parent".
    Two other tabs are created related to parent tab 'Parent' and those labeled "Action1" and Action2.
    By selecting "Action1" will result in return of the 40 with a parameter page (say page_type) is set to 1.
    By selecting "Action2" will result in rendering the * same * page 40 with a parameter (say page_type) has a value of 2.

    For the parent tab 'Parent' say that the default is to select "Action1".

    Is there a solution to implement this kind of behavior?
    I tried to create redirect pages (empty page and one branch) to achieve, but I always get stuck trying to have page 40 display the appropriate tabs and tab parent.
    Thanks in advance for any help.

    Hi Daniel,.

    First of all, don't worry about your English - it's better that my French (in fact I didn't even know you were not English until I checked your profile!)

    Second, there may be a way to manage the definition of value. As long as your instructions of doSubmit() problem tabs, which sets a REQUEST , then it can be captured - see: Re: trying to find my tabs in my browser sql tree as a result, you should be able to put any value you like. I did have the chance to set up an example of this, but I hope, that should give you an idea of what can be done.

    You will always have the issue of not being able to click on each tab, once you have clicked on one of them - but I guess that the user is not likely to do it anyway?


  • Go back to the old version

    Sorry guys, I am disgusted with this upgrade. 29 doesn't seem at all like a good UI update. The menus is really bad and that the tab bar. In addition, this does not solve my other problem tab I have to be in another question, I asked.

    How can I go back to my last version with all my windows/tabs/history restored? I'll do a system restore if I have and then cancel all automatic updates. I honestly don't care if it's for me a greater security risk.


    Thanks for responding.

      Ok so i still need to revert back to what im using now version 28. Also i found out when you turn off updates in firefox's options you should also untick "use a background service to install firefox updates." So how would i revert back to version 28 while keeping my tabs in tact?

    IMO, the "Find updates" option in the Options window does not work for me. I updated all the prefs of app.update.url an empty value in order to work as a test. Please note that the decommissioning is not a recommended solution that is approved by Mozilla. You do this on your own.
    Regarding the backup of your tabs, your open tabs are saved in the sessionrestore.js file in your Firefox profile folder

    By continuing, you can just make a copy of this file, uninstall the current Firefox via Control Panel (important: do NOT tick the box to remove your current settings.)
    Once you have deleted Firefox 29, simply download the version of Firefox 28 using the link install an older version of Firefox , download, install and copy your sessionrestore.js file in the Firefox profile folder before you open it.

      Bringing up tabs is there an app or something for firefox thats similar to google chrome's session buddy (it lets you save multiple sessions at a time and open up and your leisure to prevent it hogging resources)

    Session manager seems to be a good alternative

      This would all be so simple if they let you decide to choose between the new interface and the old one via a dropbox option or something, i dont see why so many people dont think of that, i guess it would be a pain to add that kinda feature though.

    Please note that for users who do not like the Australis interface. they have returned using various addons that are in the article How to make the new look of Firefox as the old Firefox .

    If that's all you need, please provide the solution. IF you have any other questions, please let me know.

  • ToolTips ceases to display after updating to firefox 11/12

    I'm on Ubuntu 11/12 and tooltips no longer works after that I updated to v11 or v12 of FF. I checked on various websites and ToolTips have stopped working. I checked about: config and it is.

    My extensions are: WOT; Tor-button; Flashblock; Ghostery; ABP; DNTP; HTTPS everywhere

    It's a problem to Add on, I'll try to see that it is thanks

    Edit: torbutton was the problem; TorButton disabled resolved, thanks again!

    Edit 2: FYI she also set by dragging the problem tabs, where I couldn't move / drag the tabs to re - organize / do new windows/join to other FF Windows. Solved more than a problem with this = D

  • How to create a .so file?

    I finished my app and I want to run release?

    in problems tab is thus an 'i' icon called info IE that "' derived asset '' is not yet built" "and others even info 'Flavia not yet building '.

    If anyone knows how to build that.

    For example: image below

    Solved by me hoo

  • Error #2007

    Hey guys,.

    I'm getting a

    If you use first check Flash Builder your 'Problems' tab for all warnings.

    A Google search for the error code, we get this:

    There are several examples of the error in the way of observation.

    It looks from your stack trace that you set a property on a label control wrong maybe with a string that the compiler cannot catch at compile time?

    Edit: Is there a parameter justificationStyle you explicitly set your code?  If not, is it another object of formatting text tell your label, you set a value of object that you create / set, as in the games of round the justificationStyle parameter?

  • The & quot; Console & quot; Panel guard himself choose when I write code

    When I click in the editor and start writing the code, the tab "Console" selects himself. . When I click to activate the 'Problems' tab, then click on back to write code again, the Console tab is active again! How can I stop activating itself? This is driving me crazy!

    I'm in the 'Flex development' prospect in Beta 3.

    The only way I could see the view Console, grabbing the update by
    itself was by the debugging an application that will provide instructions trace()
    in it. (Note that you have a debug session, even when opening
    "you are in the Flex development perspective).

    If I spent at the sight of the problems and began to type in the
    Editor and debugger's trace () ing like crazy in the
    background, the console window appears enter focus whenever there is a
    moment of slow motion in my typing.

    You do not have all the applications Flex running in the background do you have?

    If not, then you repro can from an essentially empty Flex application?
    Or has this problem only after you have created a lot of things.

    Rebecca - Adobe

    TankMan89 wrote:
    > Stand-alone, actionscript.

  • Is currently plagued by the same problems as a Firefox verion it is - delayed tab swtiching paint, etc. of Thunderbird?

    You know, sometimes I'll go to the Lightning Calendar tab and he painted nothing, but I'll move my mouse and to color elements such as the individual calendar days. Very weird, but I know that Firefox has recently set it exactly the same problem of what they see as a 'condition' (see bugzilla #1067470)

    I have the "TT DeepDark" theme but I have confirmed that the problem is still present on the default theme as well.

    (Delayed) Update: looks like to me that this has been resolved in silence with the version 38.1.0, released July 9, 2015. Initially, I thought it was a question of OC with my gpu, but after additional testing, which was not the case.

  • cannot open HTML file firefox opens new tab and continues to set open or save the file ran malware bytes no problem found

    Trying to open an html file firefox guard opens the dialog box open the file in a new tab. I ran malware byte without success.
    The file never opens.

    Finally refreshed Firefox problem resolved...

    I am happy to hear that you solved it will lock the thread.

Maybe you are looking for