Problems to display the image in the region from the list

Similar Questions

• Save dialog box under does not display the list of files

  Terminal Server R2 of 2012.  Dialog box "Save as" for a user does not display the list of files.  The address bar shows the way, there is a form for the file name box, and the user can save the file successfully.  But the space that would show the files in the selected directory is empty.  There is no form for the list of files box, it's just the grey box dialog box space - that is to say, it is not that it looks like an empty folder, there is simply no display form box.

  The 'Open' dialog box appears normal, showing the list of files in the selected folder.

  I had the user close the session on the Terminal Server and access it from another PC, even if I was not expecting to make a difference, and it didn't.  I have also connected on myself and has not experienced the same problem.  So it seems to be user-specific.

  What a setting, the user has selected by mistake, or a mistake any?

  Thanks for any help.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to display the list of components in ultiboard 10?

  The DRC report the errors where the components that are no longer in the design have been removed. How to display the list component and then remove them from the netlist to stop this?

  Ultiboard reported missing errors of component (part 'X' is not about design) because the part is always referenced by a net. To fix this, you must remove the part of the net. Following the steps below to remove the part form the net.

  1 tools > Netlist Editor

  2. for each network that the part has been connected to, select the Net (upper-left).

  3. Select the tab of pine trees, select the part and it is the PIN in the dialog box, then click on remove

  The problem is when the part is removed, I see no easy way to determine the threads you need to remove the part of. I entered this as a feature request to make this easier, but as a workaround, you can put part and say Ultiboard what the missing part, then search the net names on the pins and remove the part of these pins

  1 place a piece with a lot of pine trees (for example the part that was removed, or for example through Hole technology > Connectors > SIL & headers > HEADER2X9). When you place the part, make sure that the RefDes matches the RefDes of the part which has been removed.

  2. once the room is placed, you should see rats nest lines that connect the part to the nets.

  3 Zoom on the pins. You should now see the net name on each of the axes. For each of the pins connected, remove it from the net as described above.

  4. remove the part that you placed.

• EA 4.1 display of version information in navigator slows down displaying the list of tables

  Hello

  I use DM with SVN version control.

  The table browser now displays the icon of overlay on the tables. Nice!

  The version number/log-in / user is not necessary. Maybe an option to display this information.

  In any case the most important question is: now, it takes too long to display the list of tables in the browser.

  Joop

  Hi Joop,

  The version number/log-in / user is not necessary. Maybe an option to display this information.

  Yes, there is an option - "preferences > Versioning > Subversion > General '-' use the navigator overlay State labels.

  The performance - we look at this problem.

  Philippe

• How to change the fonts used to display the list of emails on the homepage?

  Looking at my Inbox or other e-mail folder, the font used to display the list of emails in folders - gives me a headache.

  How can I change this font? Is there an add-on? Something in their profile?

  Ideally, I would like to change the background color of white also. (Perhaps the color on this page where I ask the question. "It's easy to read, the font and the color!)

  I've been a programmer in a past life, so I'm tech abreast. I am new to use Thunderbird (I used FF for several years.)

  Thank you!!

  Yes, to change the font, you can use this addon:

  • Theme font & size changer

  Also, try to use themes:

  • https://addons.Mozilla.org/en-us/Thunderbird/themes/
  • https://addons.Mozilla.org/en-us/Thunderbird/complete-themes/

• Windows Media Player 12: How to permanently display the list pane

  Windows Media Player 12: Always list

  Hello world

  I've recently updated my computer to Windows 7.

  When I was on XP, the list of WMP 11 component was always displayed in the right part of the screen (except mode full-screen).
  Now WMP 12, I have to manually right-click and choose "View list" whenever I open WMPand whenever a new video starts .

  Could you tell me how to permanently display the list pane?

  Thank you

  Kind regards
  Phil

  There is no way to get or retain the component 'list' in Windows Media Player 12. You must create a playlist to see your playlist.

  I've been playing with this for hours trying to get the same thing your tyring to get.  Microsoft has changed a lot in the Windows Media Player 12 version. The latest version of the windows media player 11 is the only version that can display the playlist pane.

• How to display the list of temporary and free sites that we use?

  Adobe Web Host - Free Sites.

  How to display the list of temporary and free sites that we use?

  When you're connected creative cloud, we used to be able to view the temporary and lots of 5 free sites that we use hoe.

  Could not find a list on my creative cloud account or when the link to 'Manage' in the Muse.

  No mention of the free sites in the FAQ. Is there a change in policy? Are always included in the subscription of the free sites?

  - Adobe Muse help | Adobe Muse / Common Questions .

  When I publish in Adobe Muse CC, must I pay for hosting with Adobe?

  Adobe Muse CC allows you to publish your Web site temporary on the platform Adobe of accommodation free of charge for a trial period of 30 days. This gives you the ability to send a direct URL to your client for review. All sites with Adobe trial mode will include the field "businesscatalyst.com" in it. If you decide to take the live site by paying for monthly hosting, you can transfer your domain name and delete the subdomain businesscatalyst.com. Or you can export the HTML and host the final site with a host of your choice.

  //

  Yes, don't know why they took out of the cloud interface.

  But if you go to http://www.businesscatalyst.com/partnerportal and you connect with your ID cloud you will have access to all your cloud sites and many other features.

• Is it possible to add thumbnails to display the list of the new model?

  Is it possible to add thumbnails to display the list of the new model?

  Not with the News Module. You have an account that has access to the web apps?

• I have problems to display the Korean characters.

  My Mozilla will display the Korean characters until last week, but now it displays them in the form of the squares with a very small number. I tried all sorts of encodings, but they are not always shown. I am sure that my computers has the support of the East for languages, it properly displays files Korean but in all my browsers (Mozilla, Explorer and Chrome), suddenly, Korean characters are displayed as squares.

  I will be grateful to those who can solve my problem, ' cuz display of Korean language is really important to me.

  I have Mozilla 20 Beta.

  The sounds that you have a problem with the font that is used to display Korean characters if this is the case in all browsers.
  
  You may need to reinstall this font.

  Other East Asian as the Chinese and Japanese languages do still work?

  • http://en.Wikipedia.org/wiki/Help:Multilingual_support_ % 28East_Asian % 29
  • http://www.alanwood.NET/Unicode/unicode_samples.html
  • http://www.Typetester.org/

• Problems by displaying the name of the site in the header tab.

  In the header displays the word "Connection" instead of the site, although the site is already open.

  If the extension of FoxLingo is the cause of the problems then you must disable or uninstall this extension until the developer has released an update that fixes it.

  You can also temporarily downgrade to the 2.7.3 previous version.

  • FoxLingo: https://addons.mozilla.org/firefox/addon/foxlingo-translator-dictionary/versions/2.7.3

• Left to right alingment problem when displaying the report in Arabic

  Hello
  
  Am now work in Arabic reports, everything works fine, but the problem is with the alignment only.
  
  In the preparation of the report (generator of reports), alignment is from right to left, but in pdf format, change the alignment from left to right.
  
  I use Oracle Report Builder 10.1.2.0.2 and reports running on the Oracle 10.1.2.0.2 application server
  
  Can anyone help me this.
  
  Kind regards
  Iftikhar

  Installed the Oracle Forms and reports services 10g / application server Oracle 10 g (10.1.2.0.2) with the Arabic language and you have the problem solved.

• Problem with inputCombobox the list of values

  Hello Experts,

  I use Jdev 12.1.3.0.0

  In my application that we use selectOneChoice for descriptions referenced from table_recherche. The period of time have increased, the description. Where the need for a combobox with autosuggest behavior control. I just changed the LOV's SelectOneChoice to a ComboBox component. In the user interface, the drop-down list box displays the code instead of sense. In seeking to this subject on the internet, we found below solution.

  https://blogs.Oracle.com/ADF/entry/combo_lov_how_to_display

  I can't use above solution proposal that I don't have a link view between my paintings. Is there another solution to this without using a link.

  Thank you

  Mozakkir

  Hello Ashish,

  I solved my problem by writing the expression following groovy in my transient attribute:

  AddressVA.getFilteredRows ("key", AddressLine1) [0] .getAttribute ("Description")

  Thank you

• How to display the list on the page all?

  I have a 1 page. In this 1 page, I have a list box. This list to contain three region list.
  each list is a page (page 2, page 3, page 4). When click on any list redirect to the corresponding page, but the region from the list on page 1 does not appear when I redirect page 2, 3 or 4.
  
  How to display the page list all the 2,3,4?
  
  SKUD.

  Hello

  create the list in page zero and give the State, saying that all pages will be displayed..,.

  or

  GoTo
  Home > Application Builder > Application xxx > shared components > list of commitments

  Here you can set new pages where you need to see your list

  Kind regards
  Little Foot

• Problems with display of images on my results page

  I tried to place the following code (< img src = "* <?") PHP echo $row_rsppleresults ["picture_upload"];? (> * >) AREA in BOLD (see code below very last entry) in the hope that it would display the image. But what happens when I place the code at this location, I get an error of invalid code that it is something wrong with the BOLD italic area (see the last entry below). In addition, so that it changes the HTML implementation in shape on my page when I try to view the page and no picture. Right now, when a person completes the entry form the photo automatically get downloaded in the directory - next / public_html/rescuealerts/fomdata/uploads_missing_person_form. I am naïve how to connect the correct image with the correct information for entry into the Bulletin Board of research. Below you will find the following - my code for my PivotTable and the results page.  Everything else in the PivotTable is displayed correctly. There the images that I can't seem to appear. Any help would be greatly appreciated.

  Results page:

  <? php require_once('.. / Connections/rescue.php');? >
  <? PHP
  If (! function_exists ("GetSQLValueString")) {}
  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
  {
  If (via PHP_VERSION < 6) {}
  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;
  }

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  Switch ($theType) {}
  case 'text ':
  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
  break;
  case "long":
  case "int":
  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';
  break;
  case "double":
  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';
  break;
  case "date":
  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
  break;
  case "set":
  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;
  break;
  }
  Return $theValue;
  }
  }

  $currentPage = $_SERVER ['PHP_SELF'];

  $maxRows_rsppleresults = 10;
  $pageNum_rsppleresults = 0;
  If (isset($_GET['pageNum_rsppleresults'])) {}
  $pageNum_rsppleresults = $_GET ['pageNum_rsppleresults'];
  }
  $startRow_rsppleresults = $pageNum_rsppleresults * $maxRows_rsppleresults;

  @mysql_select_db ($database_rescue, $rescue);
  $query_rsppleresults = "SELECT missing_name, 'description', picture_upload, missing_person_form.missing_name, missing_person_form. 'description', missing_person_form.picture_upload FROM missing_person_form";
  $query_limit_rsppleresults = sprintf ("%s LIMIT %d, %d", $query_rsppleresults, $startRow_rsppleresults, $maxRows_rsppleresults);
  $rsppleresults = mysql_query ($query_limit_rsppleresults, $rescue) or die (mysql_error ());
  $row_rsppleresults = mysql_fetch_assoc ($rsppleresults);

  If (isset($_GET['totalRows_rsppleresults'])) {}
  $totalRows_rsppleresults = $_GET ['totalRows_rsppleresults'];
  } else {}
  $all_rsppleresults = mysql_query ($query_rsppleresults);
  $totalRows_rsppleresults = mysql_num_rows ($all_rsppleresults);
  }
  $totalPages_rsppleresults = ceil($totalRows_rsppleresults/$maxRows_rsppleresults)-1; $maxRows_rsppleresults = 10;
  $pageNum_rsppleresults = 0;
  If (isset($_GET['pageNum_rsppleresults'])) {}
  $pageNum_rsppleresults = $_GET ['pageNum_rsppleresults'];
  }
  $startRow_rsppleresults = $pageNum_rsppleresults * $maxRows_rsppleresults;

  $colname_rsppleresults = "-1";
  If (isset($_POST['missing_name'])) {}
  $colname_rsppleresults = $_POST ['missing_name'];
  }
  @mysql_select_db ($database_rescue, $rescue);
  $query_rsppleresults = sprintf ("SELECT missing_name, 'description', picture_upload FROM missing_person_form WHERE missing_name LIKE %s", GetSQLValueString ('%'. $colname_rsppleresults.)) '%', 'text'));
  $query_limit_rsppleresults = sprintf ("%s LIMIT %d, %d", $query_rsppleresults, $startRow_rsppleresults, $maxRows_rsppleresults);
  $rsppleresults = mysql_query ($query_limit_rsppleresults, $rescue) or die (mysql_error ());
  $row_rsppleresults = mysql_fetch_assoc ($rsppleresults);

  If (isset($_GET['totalRows_rsppleresults'])) {}
  $totalRows_rsppleresults = $_GET ['totalRows_rsppleresults'];
  } else {}
  $all_rsppleresults = mysql_query ($query_rsppleresults);
  $totalRows_rsppleresults = mysql_num_rows ($all_rsppleresults);
  }
  $totalPages_rsppleresults = ceil($totalRows_rsppleresults/$maxRows_rsppleresults)-1;

  $queryString_rsppleresults = "";
  If (! empty($_SERVER['QUERY_STRING'])) {}
  $params = explode ("&", $_SERVER ['QUERY_STRING']);
  $newParams = array();
  {foreach ($params as $param)
  If (stristr ($param, "pageNum_rsppleresults") == false & &)
  stristr ($param, "totalRows_rsppleresults") == false) {}
  return ($newParams, $param);
  }
  }
  If (count ($newParams)! = 0) {}
  $queryString_rsppleresults = '& '. htmlentities (implode ("&", $newParams));
  }
  }
  $queryString_rsppleresults = sprintf ("& totalRows_rsppleresults = %d %s", $totalRows_rsppleresults, $queryString_rsppleresults);
  ? >

  Here is my code for the dynamic table (this is also where I tried to change the code to search for images that have been downloaded with the original form.

  Dynamic table:

  < tr >

  < style td = "make-weight: normal;" Color: #000; do-family: Arial, Helvetica, without serif. do-size: 12px; ' > < div align = "left" > <? PHP echo $row_rsppleresults ["missing_name"];? > < / div > < table >

  < style td = "make-weight: normal;" Color: #000; do-family: Arial, Helvetica, without serif. do-size: 12px; ' > < div align = "left" > <? PHP echo $row_rsppleresults ['description'];? > < / div > < table >

  < style td = "make-weight: normal;" Color: #000; do-family: Arial, Helvetica, without serif. do-size: 12px; ' >< div align = "left" ><? php echo $row_rsppleresults ['picture_upload'];? >< / div > < table >

  < /tr >

  < ? PHP} while ($row_rsppleresults = mysql_fetch_assoc ($rsppleresults));? >

  < /table >

  Thank you

  hjohnson2011

  First of all, you should style table, lines and cells using CSS. In addition, it is useless for a div in the cell because, again, you can use CSS to make the style for you. Not only that, depending on the DOCTYPE was used, always will get an invalid markup when you use align = left.

  According to what is included in the field of picture_upload (just the name and extension or path and full name) your markup should look like

  If the picture_upload field contains all the information, or if it contains only the file name + extension

  GRAMPS

• How to display the list of all the constraints, triggers, procedures... .etc

  Hello
  How to view a list of all the available constraints, triggers, procedures, functions and packages in a database. And how to view its definition?

  user12222356 wrote:
  Not working is this said sql statement "object"sys"". "" DBA_OBJECTS"does not exist"

  OK, so the problem is that you have not allowed access to any data dictionary table. If you want to be able to view all of the DBA_ * dictionary of data tables, you need the ADMINISTRATOR to grant you the privilege to CHOOSE ANY DICTIONARY.

  In the future, when you post an error message, in addition to displaying the error message, it will be useful if you can get the error number, for example, that is, ORA-xxxxx

  Justin