Problems to load a .nib carbon UI for Photoshop Plugin in XCode 2.5

Hello I am trying to load a .nib UI created by Interface Builder with XCode 2.5. I work with the plugin example dissolve to the CS4 SDK samplecode. All the Docs found in

http://developer.Apple.com/documentation/cocoa/conceptual/LoadingResources/CarbonNibs/CARB onNibs.html#//apple_ref/doc/uid/10000051i-CH5-SW7

and so forth are not very useful. Anyone know of any good examples or other Docs?

Sincerely,

Andreas

If your problem is that you can't get a reference to the NIB file, you probably need to charge from your bundle of plugins. First, you must get a reference to your own package, for example, through CFBundleGetBundleWithIdentifier, using your own identifier of plugin hard (for example com.mycompany.myplugin.1).

Then, use CreateNibReferenceWithCFBundle to retrieve a handle to the file Nib. This is explained in the Unarchiving an object from a section of external beam in the help topic you mentioned.

Tags: Photoshop

Similar Questions

  • When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

    Original title: I'm loading Quciktime.

    When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

    Hi Tonyb13apb,

    ·         The issue is limited only during the installation of QuickTime?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: Uninstall and reinstall QuickTime and check.

    http://support.Apple.com/kb/HT1925

     

    Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

     

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    a. click Start, select run.

    b. type msconfigand click OK.

    c. the system dialog Configuration utility appears.

    d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

    e. When prompted, click on restart to restart the computer.

    If the problem persists, you can contact Apple support for more help and information.

    http://support.Apple.com/kb/HE57

    Let us know if it helps.

  • Error code 101-752 dotnet framework error, problems to load the new software of the printer

    Error code 101-752 dotnet framework error, problems to load the new software of the printer

    Hello

    (1) have you made changes before the start of this issue?

    (2) when you get the error message?

    (3) is the specific question of the installation of the printer software?

    (4) what is the brand and model of the printer?

    It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

    Fix the .net Framework installation

    http://support.Microsoft.com/kb/976982/en-us

    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

    See also:

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Let us know if that helps.

  • I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

    Original title: cannot find awuvomas.dll

    I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:

    No matter what you use for malware protection, follow these steps:

    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • Problem with load LOV value reset

    12.1.3 ADF

    I am facing a problem with load LOV set to reset.

    I have a page in waterfall surrounded by af LOV: PanelFormLayout. Also do some validation on the data entered by the user when clicked on submit. If the validation fails, an alert will appear on the validation failed and user will stay on the same page.

    Values LOV child get back their null or empty when you click on the "submit" button. It works as expected when the validation failed and the user has navigated to the next page. But if validation fails, the user stays on the same page and child LOV connection reset to NULL or emptyvalue. For this reason, NPE error occurs when the user attempts submit again and have to select again the child value LOV.

    Is it possible to keep the child LOV value even after submitting a form?

    Page code:

    < af:panelBox text = "Product Details" id = "pb4" >

    < af:panelFormLayout id = labelWidth "180px" = "pfl4" >

    < af:selectOneChoice value = "#{bindings." ProdType.inputValue}.

    label = "#{bindings." Required to ProdType.label'} = 'true '.

    requiredMessageDetail = "product Type cannot be NULL. Please select a value.

    shortDesc = "Select the Type of product" id = "soc1' autoSubmit = 'true '.

    showRequired = "true" contentStyle = "width: 150.0px".

    Binding = "#{viewScope.provBean.prodType} '"

    valueChangeListener = "#{viewScope.provBean.prodTypeVCL}" >

    < f: selectItems value = "#{bindings." ProdType.items}"id ="si1"/ >

    < f: validator binding = "#{bindings." ProdType.validator} "/ >"

    "< af:target execute="@this "make ="soc2"/ >

    < / af:selectOneChoice >

    < af:selectOneChoice value = "#{bindings." ProdVer.inputValue}.

    label = "#{bindings." Required to ProdVer.label'} = 'true '.

    requiredMessageDetail = 'Product Version cannot be NULL. Please select a value.

    shortDesc = 'Select Product Version' id = 'soc2 '.

    Disabled = ' #{bindings. " ProdVer.inputValue == null} ".

    contentStyle = "width: 150.0px" showRequired = "true".

    Binding = "#{viewScope.provBean.prodVer}" >

    < f: selectItems value = "#{bindings." ProdVer.items}"id ="si2"/ >

    < f: validator binding = "#{bindings." ProdVer.validator} "/ >"

    < / af:selectOneChoice >

    < / af:panelFormLayout >

    < / af:panelBox >

    Timo thanks for your response.

    Child LOV I created is an attribute of transient and resolved the problem by setting the property of passivation to true.

  • Problem call System.loadLibrary () in JRockit JVM for Solaris (Solaris OS) Vs

    Hello

    I try to transfer my code running under Sun JDK 6 in Jrockit (R28).
    However, I am facing a problem of loading a library ('so') under JRockit which works very well under the Sun JVM.
    The LD_LIBRARY_PATH setting is identical for the two JAVA VMs.

    I wrote a class simpel, loading the library (in a file called libDiskCapacityUnix.so, located in/usr/mms/common/lib) just to test this device under two virtual machines Java is the code in the class:

    public class MyClass {}

    Public Shared Sub main (String [] args) {}
    Path String is System.getProperty ("java.library.path");.
    System.out.println ("Java.Library.Path =" + path);
    System.loadLibrary ("DiskCapacityUnix");
    System.out.println ("loading library DiskCapacityUnix succeeded");
    }
    }

    Release of JRockit:

    mms10: / var/tmp [113] /jrrt-4.0.0-1.6.0/bin/java MyClass
    Java.Library.Path=/jrrt-4.0.0-1.6.0/jre/lib/sparcv9/JRockit:/jrrt-4.0.0-1.6.0/jre/lib/sparcv9:/jrrt-4.0.0-1.6.0/JRE/... /lib/sparcv9:/usr/lib/LWP:.:/ usr/mms/common/lib:/usr/cti/lib:/opt/oracle/product/11.2.0.1/instantclient_11_2:/opt/oracle/product/11.2.0.1/instantclient_11_2/lib32:/opt/oracle/product/11.2.0.1/instantclient_11_2/lib:/usr/local/lib:/usr/local/ssl/lib:/usr/lib:/jrrt-4.0.0-1.6.0//jre/lib/sparcv9:/jrrt-4.0.0-1.6.0//jre/lib/sparcv9/native_threads:/usr/local/mms/usr/local/lib:/usr/sfw/lib::/usr/lib
    Exception in thread "Main Thread" java.lang.UnsatisfiedLinkError: no DiskCapacityUnix in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1689)
    at java.lang.Runtime.loadLibrary0(Runtime.java:823)
    at java.lang.System.loadLibrary(System.java:1029)
    at MyClass.main (MyClass.java:7)


    Sun's JAVA virtual machine output:

    mms10: / var/tmp [123] / usr/mms/java/bin/java MyClass
    Java.Library.Path=/usr/MMS/Java/JRE/lib/sparc/Server:/usr/MMS/Java/JRE/lib/sparc:/usr/MMS/Java/JRE/... /lib/sparc:/usr/lib/LWP:.:/ usr/mms/common/lib:/usr/cti/lib:/opt/oracle/product/11.2.0.1/instantclient_11_2:/opt/oracle/product/11.2.0.1/instantclient_11_2/lib32:/opt/oracle/product/11.2.0.1/instantclient_11_2/lib:/usr/local/lib:/usr/local/ssl/lib:/usr/lib:/jrrt-4.0.0-1.6.0//jre/lib/sparcv9:/jrrt-4.0.0-1.6.0//jre/lib/sparcv9/native_threads:/usr/local/mms/usr/local/lib:/usr/sfw/lib:.:/ usr/jdk/packages/lib/sparc: / lib: / usr/lib
    Loading library DiskCapacityUnix succeeded

    I'm guessing that your library is a 32-bit library? JRockit on sparc 64-bit only and cannot load 32-bit libraries.

    / Staffan

  • Loading paper folding in Z for Designjet T1100ps

    Cannot load paper folding in z for HP Designjet T1100ps

    Not an update of the firmware will not help, more research shows that this printer is just not set up for this type of paper.

  • Problem with uninstalling the Toshiba Bluetooth Stack for Windows

    Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

    The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

    I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

    Thanks in advance.

    I would try to delete the folder: "C:\Program Files Toshiba Stack.
    Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

  • How can I obtain and load the service pack 2 for my sony vaio 2000

    How can I obtain and load the service pack 2 for my Sony Vaio 2000 (model year) that I need it to have

    installation of some software.

    Rex

    I suggest to download the full Windows XP Service Pack 3 (not 2) and copy to a CD for future use, here http://www.microsoft.com/download/en/details.aspx?id=24

  • "Any new name for the program" has encountered a problem and needs to close. Sorry for the inconvience

    Whenever we try to install something new, that settles it, but when we get the same error message

    "the new name of the program" has encountered a problem and needs to close.  Sorry for the inconvience

    We can't get anything to run now

    Hello

    1 is this problem limited only when installing an application?
    2. what application are you trying to install?

    Method 1.
    I recommend you to reregister the Installer engine.
    Here's how:
    a. Click Start, click Accessories and then click command prompt.
    b. at the command prompt, type the following and press ENTER after each line:

    MSIExec /Unregister
     
    MSIExec/regserver

    Method 2.
    For other methods, see the article below.
    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
    http://support.Microsoft.com/kb/2438651/en-us

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error "Generic Host process for Win 32 services has encountered a problem and needs to close." Sorry for the inconvenience. "Please tell MIcrosoft this problem."

    Original title: programs appearing and disappearing

    Generic Host process for Win 32 services has encountered a problem and needs to close.
    Sorry for the inconvenience.
    Please tell this problem to MIcrosoft. We have created an error report that you can send to help us improve the generic
    Host Process for Win 32 Services. We will treat this report as confidential and anonymous. To see the data click on send
    Error report or not send.
    I clicked on the error report, and that's what he said... szAppname:svchost.exe szAppver: 5.1.2600.5512
    szModver: 5.1.2600.5755 szModname: ntdll.dll compensate 00023845 etc, etc.

    Hi 1jimbo1,

    1. when exactly you receive this error message?
    2. did you of recent changes to the computer?

    Method 1:

    Step 1:

    You can try to start in safe mode and check if the problem occurs.

    Check out the link for more information on starting your computer in SafeMode below:

    http://support.Microsoft.com/kb/315222

    Step 2:

    If the problem does not happen in safe mode and then, try to perform a clean boot.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    http://support.Microsoft.com/kb/310353

    If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

    After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

    Method 2:

    You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.

    http://OneCare.live.com/site/en-us/default.html

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Fuse for Photoshop-skeleton / options of the body are not loading in the Properties window

    Hi, I'm trying to animate a character of fuse but the skeletons properties not load up. I left for an hour and still no luck.

    Can anyone provide any help on this?

    Screen Shot 2016-09-14 at 13.38.37 copy.jpg

    Hello

    Can you try to go to help > Sign Out (Adobe ID) and disconnect. Leave the Ps, then restart and log in again?

    Kind regards

    Steve

  • Using the event Script to load the Excel model data for users

    Hello

    Whoever did this in the FDM 11.1.2.1.

    We want to exploit the event Script to load the data validated MDF for a standard template so that users can make some adjustments and then load the same data through the FDM? Is there a better alternative. Basically, trying to avoid making adjs data forms in HFM in view of the number of columns that we have and validations for each line required with adjustments.

    Thank you

    PM

    Hello

    google + Administrator's Guide.

    It's just a matter of thought in the solution:

    -Runs a SQL query to export data from table (TDATASEG). You can filter the query by LOADID

    -Write csv file records

  • I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

    I love the develop module, but I'm doing something wrong in the library

    In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

    And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

    Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

  • Someone else has problems with their computer crashing once they have installed the Nik for Photoshop CC filters?

    Someone else has problems with their computer crashing once they have installed the Nik for Photoshop CC filters?

    Hi amlportraiture,

    Could you please let us know the exact version of Photoshop you're working on, also did you copy the Plugins and move it to the folder Plugins in Photoshop?

    And please make sure you have the latest version of Nik Collection Installer on the computer.

    Kind regards

    Tanuj

Maybe you are looking for