Problems to record sound on Camileo P30

Hello

I bought the Toshiba Camileo P30 camera everything ok, except for one, and it's annoying.
When you look at it, the sound of frequency in seconds still written and the growing noise that dramatically interrupted...

And then a little cleaner sound and again increases the noise. Its terrible.

If it somehow to correct. Can help rewrite the device flexible, if possible.
Is there a service center in Samara in Russia?

Thanks for the reply

I don't really know what the problem is here, but you need to do is to contact the dealer where you purchased this camera and ask for help.
Maybe they can offer you replacement and you can test it with new cam.

Tags: Toshiba

Similar Questions

  • Camileo P30 no sound on Youtube video

    Received a Camileo P30. I load my first YouTube video, but no sound was loaded.

    Have you checked file on the laptop and the sound is fine.

    Thank you

    Maybe you need to encode videos in the right formats and supported.
    Recommend that you check the youtube faq and Info for this page.

  • Toshiba Camileo P30 - load problems

    Hello everyone,

    Yesterday, I bought a camcorder Camileo P30, I left him in charge all night, the light was still on (not flashing), then in the morning, I tried to use the camera but was still not loaded!
    So I left all day on the load (I'm at work) and 23, when I was at home, and after 14 hours and a half, the camera not was still not charged!

    What can be the problem?
    1 charger I do not think is the original one (I bought it used) and now it reads 5V/1 has
    2nd is not light is flashing, never, is always on 'on '.

    Please help me! I don't want to think that I trashed all my money or I need some spending for a new battery and a new charger!

    > Last week, I bought a 5V 2, 1 a USB charger
    > but the magazine still does not work.

    Seems that you buy a bad or is not compatible, I recommend to test other AC adapters

  • The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

    The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

    Hello

    Control Panel - SOUNDS - Audio peripheral devices configuration-manager

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
    the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
    Just make sure that the version you have installed appears in the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
    and show disabled devices - check your micro - highlight them, then lower right properties. Do
    of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
    and APPLY / OK changes.

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Toshiba Camileo P30 wrong color!

    Hello!
    I recently bought this unit and have been distressed by the quality of the video. I also have Toshiba S10 and a quality of this video camera video above several times.
    The problem that Toshiba P30 incorrectly displays the colors, for example, instead of black color is displayed the violet. Video I save down only to the light of day.
    What is c? Where it is possible to download the firmware update?

    Post edited by: Alex69rus

    It is a frame of video, recorded camileo p30 http://fotki.yandex.ru/users/alex69rus/view/134150/?page=0

  • Camileo P30 does not work when the 8 GB SDHC card is inserted

    Hello
    I just got a new camcorder Camileo P30.
    I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
    And it does not work with the card inserted.

    Here are the symptoms:
    (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
    (2) when the card is inserted, the following occurs:
    2.1) I can't take pictures or video - it does not meet the pressed buttons.
    2.2) I can't access menus.
    2.3) I can't shut off again.
    2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
    (3) I have tried different combinations of:
    3.1) Insert the card so that the camera is turned off.
    3.2) Insert the card so that the camera is turned on
    3.3) Insert the card while the device is switched on and in one of the menus.
    (4) the camera doesn't always work if I take the card again.

    During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
    At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

    Note to work around the #2.3 I took the battery.

    I was not yet looking for updated firmware, or connect it to the PC.

    Has anyone of you has met with such a problem?
    What did you do to solve it?

    Thank you.

    Hello

    Have you tried another card SDHC?
    I m not very well what is happening here, but I recommend you another card in this camcorder.
    I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.

  • Toshiba Camileo P30 Camcoder won't turn on

    Hello.

    I bought a Camileo P30 in Hungary.It ago 3 weeks worked well all the time.
    But, yesterday, I captured a few videos, and the battery was already empty. So I went to plug in the charger. And when I did, I noticed that when he was in charge, the flash on the camera is twinkled slower that it always does. And it's annoying 'click' sound.

    Well, I didn't really like this topic, and let it load for hours. After a long period, he has not finished loading. So I plugged it in and I tried, but he wouldn't turn it on. :(
    Shortly after, I plugged it into the charger, and after a few hours, I plugged off the coast and did not also.

    Does anyone have this problem?
    What could I do with it?
    Thank you.

    Hello

    Hmm, looks like a malfunction of the cam.
    Have you tried removing the battery and wait a few hours?
    Do this!

    My cam (from another manufacturer) will not illuminate.
    I removed the battery and disconnect the adaptor as well. Then I waited one night long and then checked this once again... then I could turn on the cam.

    But of course, in the worst case, it could be a hardware malfunction

  • Update/change the firmware on a Camileo P30

    Hi, I'm new here... I have a little problem with two * camcorders Camileo P30 *.
    They appear to be identical, they have been purchased at the same time and from the same retailer, and they also have the same code number (PX-1496E-1CAM). And yet, they have two different firmwares.

    So different all in one, full HD, grab AVI with codec H264 files and a 1440 x 1080 frame size, the other, with documents same settings_ recorded files MOV with encoder prunedecythere STROKE and a frame size of 1920 x 1080.
    WHAT GIVES?
    It is a * MAJOR * incenvenience for me, since I bought two identical camcorders precisely the advantage of having to deal with the same kind of audio and video files!
    Is there a way to change the firmware one (or two) camcorders so having two machines _identical_? (On at least a / v files)

    Please let me know something... Thanks in advance

    Alex

    Hey,.

    > So different that all in one, full HD, AVI files with H264 codec and a grab image size 1440 x 1080, the other, with the same settings files MOV with encoder AVC prunedecythere records and a frame size of 1920 x 1080.
    What happens if the record with a resolution identical film, e. g. HD 1080 p? Usually two cameras should save some MOV files as mentioned in the user manual.

    You can post versions of firmware on both devices please? It would be interesting

    I would try to reset the camera which records avi at the default settings files. Go to the menu of the camera, select default settings.

    If it doesn t work I would contact an authorized service provider. Normally, they should have an explanation for that if it of normal or not.

  • Camileo P30 is badly centered

    Hello!

    I have camileo P30, test video recording and was disappointed.
    The my P30 a bad shot if a distance about 1 meter.
    Macro is DISABLED.
    My video is different from other test documents that are found on the Internet.

    The video camera is defective?

    PS
    The example of (720 p) video is not present sharpness http://rapidshare.com/files/242359972/IMAG0009.MOV.html
    The example of video (720 p) for a short distance, but the macro is OFF http://depositfiles.com/files/pe5dv76ge

    Hello

    Have you tried to clean the lens?
    My parents have a similar problem, until my father noticed that the purpose of the cam was really dirty and there was a lot of fingerprints that has affected the focus.
    Try to clean it using a microfibre lint cloth.

    You should also check the user's manual.
    There, I found information that the zoom depends on the quality of the film and the resolution.
    For example:
    Zoom in HD (1080 p): 1 x 10 (5 x digital optical + 2 x)
    In another video resolution zoom: 1 x 20 x (5 x digital optical + 4 x)

    I also found something that Macro mode should be used only for objects that are less than 80 cm.

  • Camileo P30 - SD card does not work

    Sorry for my bad English,
    I just got a Camileo P30 and a memory card SD 2 GB Kingston.

    I used the card on my camera, I took a lot of pictures and no problems with this card.
    Now, I start using this SD on the Camileo P30 (I format the card) and I made a few videos, first time, everything was fine.
    A few days later, the video of the camera has been altered (the camera in the menu, show me some yellow icons with the red question mark)

    I decide to format again memory SD card and I made a few other videos (a few minutes), but later I got an error message "memory full".
    I reconnect the camera to the computer but it cannot prepare the SD memory card, and now, the card is broken the camera can not more read and computer too.
    I lost my memory card SD and all my videos :-(

    Can anyone suggest something or someone has problems too.
    Please let me know.
    It is a very bad start with this new camera.

    Thank you
    Carlo

    Yes, I agree with shudman
    Looks like a defective SD card that caused this problem.
    There are several manufacturers of different SD cards on the market which guarantees a different quality and different SD cards
    I recommend reading some reports to test the product and buy a good quality SD card.

    Good bye

  • Knowing firmware Camileo P30

    Is there a way to know the Camileo P30 firmware?
    Someone had written... Press record and Zoom upward... nothing happens
    Maybe go to a few menus first?
    Is there anything else you can do with shortcuts?
    Maybe the hidden menus?

    I found... Here is how to activate the FlashCam

    Enter the menu movie / pictures and hold (last frets 'play') and zoom to the top...

    My company is:
    7020 HAS 9 * L - B *.
    D34T-Toshiba - 11 L-PAL
    A2S-SDK331 - 090508.0556
    090619 22:58:03
    D:1, L: 1

  • How can satellite A300-1NO - I record sounds?

    Hello. I have a Satellite A300 1NO machine, but I don't know how to put my sound card, because I want to record all the sounds that play my sound card. For example, listen to internet radio, and record a track of her.

    I cannot set my microphone to record it and can't see any more. WaveOut or something else... How could I solve this problem? I have the 6.0.1.5599 of its driver.

    Hello

    If you want to record the sound that plays the sound card, you need another program. So it is not possible to record sound only with the audio driver.

    There are many programs that can do this. I have good experiences with no. 23 Recorder. Use Google to find out. Its freeware and easy to use.
    In addition, there are some programs that streams internet radio, and save as. But I n t use such a program, but Google can help you find one.

    Welcome them

  • Satellite P300 - how to record sounds from sources other than the microphone?

    I own a P300 Satellite with Windows Vista Home Premium. My problem is the only source that I can use to record sounds is the microphone and I want my voice to blend a wav. Pre-recorded file of my guitar. I used to do with my windows xp desktop computer and a map its SoundBlaster.

    Is it possible to do it on my laptop?

    Hey,.

    You can also record sound using the microphone jack on the front of your laptop (line). Then, you can connect a Microphone or your guitar to this jack and record music using software like Audacity recording for example.

    If you have any other questions please let us know! :)

  • Recorded sounds are auto setting

    I want h9t with windows 8, i5 - 3570K, beats audio and I bought the system in January 2013.

    Recorded sounds sounds horrible because of some kind of auto setting Hat happens.  Record of my soundcard, the volume goes up and down at random as it seems.  When I try to record from my microphone volume drops to 20% if a note is held for more than 2 seconds.  I have disabled Skype and tab comunications of the menu sounds set to "do nothing".  This sounds like some sort of auto setting the problem to experts?  Where can I turn this off?

    Hmmm... can't play music?

    Is that the music stored on your hard drive or music streaming on the internet? or both?

    I'd first uninstall and then reinstall the driver.

    To do this:

    1. press on the Windows key + X

    2. click on Device Manager

    3. expand sound, video and game controllers

    4. double-click on IDT Audio

    5. click on the driver tab

    6. click on the button uninstall

    7. click on restart now

    During the reboot, Windows will automatically detect and reinstall the driver missing (the latest version).

    Let me know the results when you get a chance

  • Camcorder Camileo P30 SD supports SDHC cards

    Hello

    I'll buy this model. I need to know.
    Camcorder Camileo P30 SD supports SDHC cards?

    Can I use 8 GB SDHC card in this product?

    Please advice.

    Hello

    I m not a Camileo P30 owner, but a friend of mine has one and use a 8 GB SanDisk SDHC card without any problems.
    For the Camileo P30 supports SDHC cards.

    Somewhere in the Internet, I read that the camera supports SDHC up to 32GB cards.

Maybe you are looking for