Problems to start the iPad after the charge.

I have left the iPad charging outside the area during the night and have had start-up problems. I have a screen black and white and on pressing them and holding the sleep/home button an image of a battery. I release the buttons and finally after pressing the buttons, I get my home screen indicating a 100% charge. Has happened twice in the last few days when I greeted the battery power to reduce to 5%. My question is - this problem occurs when the battery power is authorized to reduce equal to or less than 5% before recharging or is the battery dying and requiring a replacement?

Without knowing at what age the iPad is, it would be difficult to blame it on the battery dying. I never let my battery get too low before I reload them iOS devices. In fact, I put my Air 2 iPad and iPhone 5s on the charger all night in order to get a full charge overnight. I use the iPad all day at work, so I need to reload or to take the charger and cable with me, I prefer not to do. I prefer to load the day after.

Why don't experiment you a little and do not let the unit run as low. Maybe that load when it gets to 25% left and see if that makes a difference.

Tags: iPad

Similar Questions

  • Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

    Home built PC

    Card mother Gigabyte GA-Z77MX-D3H

    Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

    Windows Pro 10

    Windows Home Server 2011 on LAN

    I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

    All good advice?

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • problem when starting the built-in Server applicatino

    I am newbie using jdeveloper 11.1.1.5 and ADF so I start the web application of fusion that exist in jdeveloper help, but when I received the stage run the app and when I tried to run start the integrated application server that he has failed with the following error:

    [Waiting for the field to complete the construction...]
    [11: 43:51] Creation of integrated Weblogic domain...
    [11: 44:39] integrated Weblogic domain Extension...
    [11:45:18] integrated Weblogic domain completed successfully.
    Using the 7101 port *.
    "C:\Documents and Settings\b.othman\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
    [waiting for the server to complete its initialization...]
    The system does not have the specified path.
    .
    .
    Arguments of memory in JAVA:
    .
    Start mode of WLS = development
    .
    CLASSPATH =
    .
    PATH=C:\app\hiba\product\11.1.0\db_1\bin; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem
    .
    ***************************************************
    * To start WebLogic Server, use a username and *.
    * password assigned to an administrator-level user. For *.
    * server administration, using the WebLogic Server *.
    * the http://hostname:port\console console *.
    ***************************************************
    from weblogic with the Java version:
    Java version "1.6.0_24".
    Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
    Java Client VM (build 19.1 - b02, mixed mode)
    WLS starting with line:
    C:\Oracle\Middleware\jdk160_24\bin\java-Dweblogic.Name=-Djava.security.policy=\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=D:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true
    Use: java [-options] class [args...]
    (to execute a class)
    or java [-options]-jar c [args...]
    (to execute a jar file)

    where options include:
    -customer to select the 'client' VM
    -Server to select the 'server' VM
    -hotspot is a synonym for the 'customer' VM [obsolete]
    The default VM is a customer.

    -cp < search path for class directories and zip/jar files >
    -classpath < search path for class directories and zip/jar files >
    C are separate directories, JAR archives list.
    and ZIP archives to search for class files.
    D < name > = < value >
    set a system property
    -verbose [: class: gc: jni]
    turn on verbose mode
    -a print product and output
    -version: < value >
    requires the version specified to run
    showversion - product print version and continue
    JRE - restrict search | JRE - No.-restrict-search
    include/exclude user private JRES in the version search
    -? -allow to print this help message
    X - print help with non-standard options
    -ea [: < packagename >... |: < classname >]
    -enableassertions [: < packagename >... |: < classname >]
    enable assertions
    -da [: < packagename >... |: < classname >]
    -disableassertions [: < packagename >... |: < classname >]
    disable assertions
    ESA | -enablesystemassertions
    activate the system asserts
    DSA | -disablesystemassertions
    disable assertions of system
    -agentlib: < libname > [< options > =]
    load the library native agent < libname > example - agentlib: hprof
    See also, agentlib -: jdwp = help and agentlib -: hprof = help
    -agentpath: < path > [< options > =]
    load the library native officer of full path
    -javaagent: jarpath > [< options > =]
    agent of loading Java programming language, see java.lang.instrument
    -startup: < imagepath >
    display the home screen with the specified image
    Process is complete.

    I think that the problem in calling java cause there is no class name or jar to call

    I need some help with that

    Thank you

    Try to set the JDEV_USER_DIR environment variable to point to a directory of user JDeveloper without spaces inside. Make sure that you restart JDeveloper after him.

  • Problems to start the Oracle 11 g on Windows 7 64-bit database

    Hello world

    I'm you try to start the database Oracle 11 g on Windows 7 64- bit , but the database consumes all memory computer and have to restart the computer, someone has experienced this problem?
    I have to do some configurations to the Bank to work on a commune computer?


    Computer configuration:

    Processor: Core i5

    6 GB of RAM

    Database version: Oracle Database 11g 11.2.0.1

    Windows 7 Professional 64 bit



    Cordially,


    --

    Yang Gonzales

    Software developer

    Brazil

    There are a lot of bugs related to the high memory or CPU usage in Windows. Please open a Service request for further diagnosis to identify exactly what is causing this problem.

    Thank you

    Ashish

  • Problem to start 10 PSE after it closed

    What 10 PSE (installed on a PC PC WIN7 Pro) closing closing the process seems to work OK. However when you try to start the PES again an error message occurs with the PSE is running and must be closed before restarting. I have the PhotoshopElementsEditor.exe file is located in the Manager Windows and tasks if I close this file down the PSE can do it again.

    The problem seems related to the PES down take down all the files correctly. I have removed the PSE and top it up with the same result.

    So I don't need to go into the Task Manager everytime I need to reopen the ESP if I ran it since the last PC power supply

    Hi, I think I'll wait to create a new account, the cumputer is new so it should have been a fairly clean installation of PSE from the outset that I think. A new account (even if I can delete) may create other problems?

    Since the last time I did the folllowing:

    1. I did the check the "C:\Users\\AppData\Roaming\Adobe\Photoshop Elements\10.0\Editor\.

    and I have 4 files as below:

    I had no error messages in this folder, even if I have 5 sec before had the failure report that the PSE could not start due to which is was already running. I used my normal functions in PSE and I do not see that all functions is missing.

    2. I tried again to create a shortcut to the PES edit but this time I tried to run only after a restart of the computer and this time he did not start, he stated that he was missing a file any.

    3. I saw in the folder Adobe PSE 10 that VLC had to file in this folder. I installed VLC on the cumputer, I do not know if this may be a conflict?

    Edit:

    4 maybe I could be important to know that the I can't find the Organizer in the set-up I knew, if I launch the application with the original icon Editor starts. If I click the organizier in the upper right corner, it starts to create workspaces but nothing else. I don´ ' t use the organiser so for me it's OK, but maybe that it's related to my other problem?

    I think I'll also try call to technical support of Adobe or cat, thanks for trying to help me :-).

  • problem with starting the machine; stops with error message generation

    After power on the following error message appears:

    "Windows could not star due to an error in the software. Please report this problem OS: load needed DLLS for kernel. Please contact your support person to report this problem. »

    http://support.Microsoft.com/kb/812450

    You can also try this:-

    It should boot from the Setup disk, go into the repair console (press R) and type the following commands:

    [letter]:\i386\kdcom.dl_ [letter]:\windows\system32\kdcom.dll HDD Drive copy

    [letter]:\i386\bootvid.dl_ [letter]:\windows\system32\bootvid.dll HDD Drive copy

    There is a space after copy and that the paths of the files substitute your drive letter Cd [drive letter] and the letter of your hard drive for [HARD drive letter] where your XP is installed.

  • Problem to start the database console

    Hi guys...
    I have installed oracle 11 g release 2 in Ubuntu 9.10
    I need to start dbconsole but, the result is like this:

    ORACLE_HOME=/U01/app/Oracle/product/11.2.0/dbhome_1
    ORACLE_SID = archbase

    THE DATABASE HOMEPAGE
    . / emctl start dbconsole
    ORACLE_UNQNAME environment variable


    [email protected]: / u01/app/oracle/product/11.2.0/dbhome_1/bin$. / emctl start dbconsole
    ulimit: 25: wrong number
    ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.

    SQL > startup
    ORA-01078: failure in the treatment of system settings
    LRM-00109: could not open the parameter file ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/initarchbase.ora'


    SQL > alter database open;
    change the database open
    *
    ERROR on line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session IDs: serial number 0: 0


    SQL > show parameter db_unique_name;
    ORA-01034: ORACLE not available
    Process ID: 0
    Session IDs: serial number 0: 0

    Help me please, how to solve this problem step by step.

    Published by: [email protected] on February 26, 2010 19:02

    When everything has failed, read the Fine Manual

    http://download.Oracle.com/docs/CD/E11882_01/install.112/e10840/pre_install.htm#i1011717

  • Problem with starting the computer

    When I turn on my computer (vista), I received the message "CPU fan.", stopped to protect the computer But the fan works perfectly and the computer works perfectly if I hired F2 immediately to the message. What's wrong?

    http://www.TomsHardware.com/Forum/283965-31-working-properly-message

    Read the info on the link above; see if it is material to your problem.

    If this is not the case, try the Vista repair Foprum:

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

    See you soon.

    Mick Murphy - Microsoft partner

  • problems to start the windows Defender

    I just installed windows defender and scanned my computer it asked me to restart, I then went to try and open it again and it came with a popup indicating that "this operation has been cancelled due to restrictions in effect on this computer. Contact the system administrator.

    You use AVG, McAfee, MSE or Norton?  These programs (and several others) cannot be run at the same time as Windows Defender.  You may need to uninstall Windows Defender in order to avoid potential conflicts with your anti-malware program.

    See below for more information:

    Windows Defender and Microsoft Security Essentials

    Kind regards...

  • Install LR 6 stand alone update 64-bit windows 8.1 problem to start the program Adriano Gatt

    I installed LR 6 stand alone update on windows 8.1 but when it launches a opens the error: "cannot find an entry point in the library C:\windows\system32\msvcp110.dll. Y at - it any help on this forum on this issue. Thanks.Adriano Gattoni

    It is a mistake to Mrs.

    Download July 2012 update for Microsoft Visual Studio RC 2012 from official Microsoft Download Center

  • laptop computer becomes slow after a while of use and when the charger is connected, becomes normal.

    Hello

    I use HP Compaq Presario CQ62, Windows 7 Ultimate 32 bit OS, 4 GB ram, Intel core i5 processor. It is a portable 4 year old. The battery was changed 8 months ago.

    Now, coming to the problem, my laptop will work very well for a few minutes at the start when I turn it on. After some time, the laptop everything becomes so slow it takes forever to work. This occurs when the power is not connected. If I connect power, less than a minute it starts to work faster. But the laptop would become very hot.

    This problem started when I updated my iPod. After update iPod, I had this problem even while the charger is plugged. Later, I changed the OS Win7 Home premium genuine to Win 7 Ultimate. (Pirates). I have run the genuine Antivirus, cleaned the registry and everything. The problem persists. Please help me with this topic.

    Thanks in advance

    -Kere

    kaaranjikere,

    So I checked the error you are getting, and it is not the battery do not, it is the power which is a failure and that includes everything for the power.

    So it is likely that something wrong with your motherboard.

    You will need to take the system to someone looking over everything.

    I would like to know how everything goes

    Nice day.

  • SRS problem lock at the labview program amplifier with regard

    Madam, Sir, I have a labview program for SRS 830 lock in amplifier and problem is that the output is depends on the sensitivity... as we change sensitivity 500mv to 1v then exit hydro-huileuses changes. automatic gain function does not work. I'm so amazing that, about what the sensitivity, the output is correct. Please, help me to overcome this problem by starting the function of automatic gain. I enclose you than vi. When I run vi to autogain, then it displays an error and stop.

    'This error' mean? Time-out error or a parameter? If it is a parameter error, definitely check the manual to see if this is supported.

  • Cannot start the listener in Oracle 12 c

    Hello

    I installed oracle 12 c on windows server 2012. I recently changed the server IP and I encountered a problem in starting the listener. The listener is unable to start services.

    When I run the 'stat lsnrctl"I received the following error message:

    Started with pid = 2188

    Error listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=WIN-IPEC001.lan) (PORT = 1521)))

    TNS-12545: Connect failed because target host or object does not exist

    AMT-12560: TNS:protocol adapter error

    TNS-00515: Connect failed because target host or object does not exist

    Windows 64-bit error: 1001: unknown error

    Mon at 13:35:41 01 June 2015

    System settings file is C:\app\Administrator\product\12.1.0\dbhome_1\network\admin\listener.ora

    Log messages written to C:\app\Administrator\diag\tnslsnr\WIN-IPEC001\listener\alert\log.xml

    Trace information written to C:\app\Administrator\diag\tnslsnr\WIN-IPEC001\listener\trace\ora_1528_2468.trc

    Trace level is currently 0

    All nicely experts advise on what I can do to solve this error.

    Thanks and greetings

    Correct - but the error message is typical of the hostname resolution failed.

  • I have a problem loading with my iPad Air2.  I used other cables and Chargers but still doesn't load.  I plugged the iPad to iTunes and a DFU after he took a few hours that the iPad has been completely restored and apps reloaded.  In addition to the

    My iPad will not normally charge.  I tried different cables and Chargers.  I plugged the iPad to iTunes and reset a DFU.  After only a few hours the iPad finished reloading all software and reloaded new apps, it had also charged the battery but the problem remains, I still can't load the iPad normally.  Any help out there?

    There are very few things that keep loading an iPad. Some of these (other charger plugged into a good outlet, different cable) you have already tried. Others are:

    1 dirt, lint or fuzz in the port of loading of the charger or the iPad. Check and clean carefully if necessary.

    2. a software failure. Reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

    3. failure. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

  • Battery power... after I plug the charger on my laptop it will start loading but after like 10 seconds stops.what is it possible?

    I plug into the connection starts to load but after like 10 seconds it stops... the computer remains switched on with the charger but it does not load. What can be?

    Hello

    This should ask in answers - Forum Windows for your version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    ======================

    References to Vista also apply to Windows 7.

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    =================================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    =================================================================

    Other information that might help:

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Battery meter: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

    Battery saver
    http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

    Solutions to common battery problems
    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

    What is the precise the battery meter?
    http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

    ============================================================

    Try this - to make a Restore Point

    How to create a System Restore Point in Windows 7
    http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
    who will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

    I hope this helps.

Maybe you are looking for