Problems turning on computer

Similar Questions

• The power button will not turn on my computer. Is there a way to solve this problem, or the computer not sleep once I do back on?

  I have a MacBook Pro 2011.

  The power button does not turn the computer on when the computer goes to black screen.

  The battery he is

  iI tried to Community assistance to research and tried to wait. The next morning, I was able to turn it back on. Now, it happened again.

  Please help me. I can afford a new Mac.

  Thank you

  Get it fixed. Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.

• Turning the computer off

  After you click "turn off computer", it takes a few minutes to get to "disable."  What can I do to solve the problem?

  By turning off the computer, it is usual to take a minute or less. If you have used a lot of memory, did not run updates, or have an old computer, this will take his time.

• Why my computer shuts down when I click both don't turn off computer buttons?

  My computer is an IBM Thinkpad T42

  Today, when I clicked on the button start and then disable the turn off computer button, the computer of the computer and then selected button would not be closed to low or off. Any ideas why it would not be arrested? Any ideas how to get it to close help to disable the buttons on the computer?

   I have can stop him by the on/off switch.

  Thank you

  Henry

  Hi Henry,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you are not able to stop the computer.

  This problem occurs if you install some versions of Norton Antivirus 2003.

  Perform the steps from the link below and see if it helps.

  You cannot log off, restart or shut down your Windows XP-based computer 

  Hope this information helps.

  Answer to us if you are having problems with shuts down the computer or any other problem of Windows, and we would be happy to help you.

  Good day!

• I have a problem with my computer

  I have a problem with my computer, I turned on my computer the next day and all the wat I could see was a new office with my files and missing files, but the hard drrive indicates that there are more files on the hard drive.please what I need to do? I have also to see the all the hidden folders, but always impossible to find out what anyone on the computer.

  It is a symptom of a corrupt user profile.  When Windows detects a corrupted profile, he creates a new temporary profile and continues to log.  Whatever you do, do not save critical files under this new profile.  Recovery is fairly simple and involves the creation of a new user and moving files over to the new user.  Moreover, sometimes a 'chkdsk' or 'System Restore' operation will restore the original profile.  The following articles describe how to recover from a corrupted profile.  Choose the one that suits you best.

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "Windows XP problems if your profile is corrupted"
     <>http://support.Microsoft.com/kb/326688 >

  "How to copy data from a damaged in a new user profile in Windows XP user profile"
     <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• Windows not working-turn on computer and get nothing but a screen is empty

  Turn on computer and nothing else than a screen empty must cut the restart of the computer and you connect via Safe Mode scanned with my security system and Microsoft, but no problem what is wrong

  It could be that your video card has been set to a setting that your monitor does not support.  When you start using safe, try to change your monitor configuration to something different.
  Right-click empty space in desktop-> properties-> settings (tab)
  I suggest to change 'screen resolution' to something different.  No matter that you don't have many choices or screen looks terrible in this resolution, but simply change to something different and "OK" your way out.  Then, restart your computer in Normal mode and see if it displays now something.  If so, then change the resolution to anything that works for you.  You'll probably have more choice in Normal Mode.

  HTH,
  JW

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• close: disappears from the task bar, her box "turn off computer" does not reach out

  I am running windows xp sp3 32-bit. When I shut down the computer through the Start button, the taskbar disappears, and the box "turn off computer" does. I have to use ctrl-alt-del to shut down the computer. I got the settings to a previous restore point when it was still working, but it does not solve the problem. What should I do to return to its original position?

  Hi tx_grizzly,
   
  -Have you done recent changes made to your computer before this problem started to happen?
   
  Try these methods and see if it helps fix the problem.
   
  Method 1: Follow these steps to change the way users log and see that it helps:
   
  a. Click Start. Click on Control Panel.
  b. open user accounts in Control Panel, click on change the way users connect or disconnect, click on use the Welcome screen.
  c. click on apply. Click OK.
   
  Method 2: Try the steps listed in the article for this problem:
  Your computer stops responding when you try to shut down in Windows XP

• My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  Hi Harry,.

  · What happens when you try to stop?

  · You receive an error message or error code?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  You can check the link below: Windows XP Shut Down and auto-restart issues: http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

  Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• Photo gallery Pop Up when turn on computer

  Why library pop up every time I turn the computer when and while watching one of my photos?  I do not have this program on my computer.

  Hello

  Method 1.
  There is a program at startup which launches Photo Gallery, I would ask that you perform a clean boot to find this program.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Method 2.
  You can also change the default program to open video files.
  Reference:
  How to change or choose the program that starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP deskjet 2130: whenever I turn my computer off my HP deskjet printer is uninstalled.

  Whenever I turn my computer off my HP deskjet printer is uninstalled. Once again, I have to remove it from the Control Panel, reinstall it again and then use it. Its getting really heavy. Please help me.

  Hey @Arry2,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your printer Deskjet 2130 on your Windows XP computer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, launch the printing and scanning doctor. You can download the doctor by clicking on this link.

  Please let me know the results after following the above. If your queue still, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Sleep is turned off computer

  When I put a laptop with Vista Ultimate that is plugged into an outlet in mode sleep, after a short moment the computer turns off and when I come back to use the computer I have to restart the computer. I checked the Advanced section of the power, but it seems that the only option it gives is the amount of time that the computer has been turned on before going to sleep. How can I keep the on, but in mode 'sleep' when I'm not using it rather than turn the computer off.

  Hello

  To use FILES MyEventViewer - event logs clear ALL - then let the computer sleep when you
  can - it should be easier to see the events that are close to the sleep issue/restart. Then
  Display pertinent information for a few of those who, like what's in the lower pane of the utility
  When you click the event in the upper pane. You can also use the Options - Advanced
  Filter to refine the events when the sleep problem arises.

  Also check with BlueScreenView for these time periods to see if there are any BSOD Info
  (just because you don't see it does not mean that they do not occur).

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  ---------------------------------------------------------

  Peacoats, it's a process of elimination using the methods of troubleshooting in
  the above message.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

  I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

  I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

  He continues to do in cycles?

  Help

  JOhn

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
  These removable media can cause this problem during the restart of Windows.

  or

  System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  When my computer can only be upgraded to Mountain Lion?

  Any Mac that can run Mountain Lion can run El Capitan, as long as the conditions are identical.

  

  Too little information: you must identify the model of your iPhone and explain exactly your problems. There is no way that anyone would be able to help otherwise.